#########
# TODO: power_restore and power_dropout are currently neither
-# documented nor supported except on ZY1000.
+# documented nor supported.
proc power_restore {} {
echo "Sensed power restore, running reset init and halting GDB."
#########
# TODO: srst_deasserted and srst_asserted are currently neither
-# documented nor supported except on ZY1000.
+# documented nor supported.
proc srst_deasserted {} {
echo "Sensed nSRST deasserted, running reset init and halting GDB."
# measure actual JTAG clock
proc measure_clk {} {
set start_time [ms];
- set iterations 10000000;
+ set iterations 10000000;
runtest $iterations;
- echo "Running at more than [expr $iterations.0 / ([ms]-$start_time)] kHz";
+ set speed [expr "$iterations.0 / ([ms] - $start_time)"]
+ echo "Running at more than $speed kHz";
}
add_help_text measure_clk "Runs a test to measure the JTAG clk. Useful with RCLK / RTCK."
# JTAG-specific names despite the fact that the operations were not
# specific to JTAG, or otherwise had troublesome/misleading names.
#
-# FIXME phase these aids out after about April 2011
+# FIXME phase these aids out after some releases
#
-proc jtag_khz args {
- echo "DEPRECATED! use 'adapter speed' not 'jtag_khz'"
- eval adapter speed $args
-}
-
-proc jtag_nsrst_delay args {
- echo "DEPRECATED! use 'adapter srst delay' not 'jtag_nsrst_delay'"
- eval adapter srst delay $args
-}
-
-proc jtag_nsrst_assert_width args {
- echo "DEPRECATED! use 'adapter srst pulse_width' not 'jtag_nsrst_assert_width'"
- eval adapter srst pulse_width $args
-}
-
+lappend _telnet_autocomplete_skip jtag_reset
proc jtag_reset args {
echo "DEPRECATED! use 'adapter \[de\]assert' not 'jtag_reset'"
switch $args {
}
}
-# stlink migration helpers
-proc stlink_device_desc args {
- echo "DEPRECATED! use 'hla_device_desc' not 'stlink_device_desc'"
- eval hla_device_desc $args
-}
-
-proc stlink_serial args {
- echo "DEPRECATED! use 'hla_serial' not 'stlink_serial'"
- eval hla_serial $args
-}
-
-proc stlink_layout args {
- echo "DEPRECATED! use 'hla_layout' not 'stlink_layout'"
- eval hla_layout $args
-}
-
-proc stlink_vid_pid args {
- echo "DEPRECATED! use 'hla_vid_pid' not 'stlink_vid_pid'"
- eval hla_vid_pid $args
-}
-
-proc stlink args {
- echo "DEPRECATED! use 'hla' not 'stlink'"
- eval hla $args
-}
-
+lappend _telnet_autocomplete_skip adapter_khz
proc adapter_khz args {
echo "DEPRECATED! use 'adapter speed' not 'adapter_khz'"
eval adapter speed $args
}
+lappend _telnet_autocomplete_skip adapter_name
proc adapter_name args {
echo "DEPRECATED! use 'adapter name' not 'adapter_name'"
eval adapter name $args
}
+lappend _telnet_autocomplete_skip adapter_nsrst_delay
proc adapter_nsrst_delay args {
echo "DEPRECATED! use 'adapter srst delay' not 'adapter_nsrst_delay'"
eval adapter srst delay $args
}
+lappend _telnet_autocomplete_skip adapter_nsrst_assert_width
proc adapter_nsrst_assert_width args {
echo "DEPRECATED! use 'adapter srst pulse_width' not 'adapter_nsrst_assert_width'"
eval adapter srst pulse_width $args
}
+lappend _telnet_autocomplete_skip interface
proc interface args {
echo "DEPRECATED! use 'adapter driver' not 'interface'"
eval adapter driver $args
}
+lappend _telnet_autocomplete_skip interface_transports
proc interface_transports args {
echo "DEPRECATED! use 'adapter transports' not 'interface_transports'"
eval adapter transports $args
}
+lappend _telnet_autocomplete_skip interface_list
proc interface_list args {
echo "DEPRECATED! use 'adapter list' not 'interface_list'"
eval adapter list $args
}
+lappend _telnet_autocomplete_skip ftdi_location
proc ftdi_location args {
echo "DEPRECATED! use 'adapter usb location' not 'ftdi_location'"
eval adapter usb location $args
}
+lappend _telnet_autocomplete_skip xds110_serial
proc xds110_serial args {
echo "DEPRECATED! use 'xds110 serial' not 'xds110_serial'"
eval xds110 serial $args
}
+lappend _telnet_autocomplete_skip xds110_supply_voltage
proc xds110_supply_voltage args {
echo "DEPRECATED! use 'xds110 supply' not 'xds110_supply_voltage'"
eval xds110 supply $args
tailcall "hla $cmd" {*}$args
}
+lappend _telnet_autocomplete_skip "hla newtap"
proc "hla newtap" {args} {
echo "DEPRECATED! use 'swj_newdap' not 'hla newtap'"
eval swj_newdap $args
}
+lappend _telnet_autocomplete_skip ftdi_device_desc
+proc ftdi_device_desc args {
+ echo "DEPRECATED! use 'ftdi device_desc' not 'ftdi_device_desc'"
+ eval ftdi device_desc $args
+}
+
+lappend _telnet_autocomplete_skip ftdi_serial
+proc ftdi_serial args {
+ echo "DEPRECATED! use 'ftdi serial' not 'ftdi_serial'"
+ eval ftdi serial $args
+}
+
+lappend _telnet_autocomplete_skip ftdi_channel
+proc ftdi_channel args {
+ echo "DEPRECATED! use 'ftdi channel' not 'ftdi_channel'"
+ eval ftdi channel $args
+}
+
+lappend _telnet_autocomplete_skip ftdi_layout_init
+proc ftdi_layout_init args {
+ echo "DEPRECATED! use 'ftdi layout_init' not 'ftdi_layout_init'"
+ eval ftdi layout_init $args
+}
+
+lappend _telnet_autocomplete_skip ftdi_layout_signal
+proc ftdi_layout_signal args {
+ echo "DEPRECATED! use 'ftdi layout_signal' not 'ftdi_layout_signal'"
+ eval ftdi layout_signal $args
+}
+
+lappend _telnet_autocomplete_skip ftdi_set_signal
+proc ftdi_set_signal args {
+ echo "DEPRECATED! use 'ftdi set_signal' not 'ftdi_set_signal'"
+ eval ftdi set_signal $args
+}
+
+lappend _telnet_autocomplete_skip ftdi_get_signal
+proc ftdi_get_signal args {
+ echo "DEPRECATED! use 'ftdi get_signal' not 'ftdi_get_signal'"
+ eval ftdi get_signal $args
+}
+
+lappend _telnet_autocomplete_skip ftdi_vid_pid
+proc ftdi_vid_pid args {
+ echo "DEPRECATED! use 'ftdi vid_pid' not 'ftdi_vid_pid'"
+ eval ftdi vid_pid $args
+}
+
+lappend _telnet_autocomplete_skip ftdi_tdo_sample_edge
+proc ftdi_tdo_sample_edge args {
+ echo "DEPRECATED! use 'ftdi tdo_sample_edge' not 'ftdi_tdo_sample_edge'"
+ eval ftdi tdo_sample_edge $args
+}
+
+lappend _telnet_autocomplete_skip remote_bitbang_host
+proc remote_bitbang_host args {
+ echo "DEPRECATED! use 'remote_bitbang host' not 'remote_bitbang_host'"
+ eval remote_bitbang host $args
+}
+
+lappend _telnet_autocomplete_skip remote_bitbang_port
+proc remote_bitbang_port args {
+ echo "DEPRECATED! use 'remote_bitbang port' not 'remote_bitbang_port'"
+ eval remote_bitbang port $args
+}
+
+lappend _telnet_autocomplete_skip openjtag_device_desc
+proc openjtag_device_desc args {
+ echo "DEPRECATED! use 'openjtag device_desc' not 'openjtag_device_desc'"
+ eval openjtag device_desc $args
+}
+
+lappend _telnet_autocomplete_skip openjtag_variant
+proc openjtag_variant args {
+ echo "DEPRECATED! use 'openjtag variant' not 'openjtag_variant'"
+ eval openjtag variant $args
+}
+
+lappend _telnet_autocomplete_skip parport_port
+proc parport_port args {
+ echo "DEPRECATED! use 'parport port' not 'parport_port'"
+ eval parport port $args
+}
+
+lappend _telnet_autocomplete_skip parport_cable
+proc parport_cable args {
+ echo "DEPRECATED! use 'parport cable' not 'parport_cable'"
+ eval parport cable $args
+}
+
+lappend _telnet_autocomplete_skip parport_write_on_exit
+proc parport_write_on_exit args {
+ echo "DEPRECATED! use 'parport write_on_exit' not 'parport_write_on_exit'"
+ eval parport write_on_exit $args
+}
+
+lappend _telnet_autocomplete_skip parport_toggling_time
+proc parport_toggling_time args {
+ echo "DEPRECATED! use 'parport toggling_time' not 'parport_toggling_time'"
+ eval parport toggling_time $args
+}
+
# END MIGRATION AIDS
Code Review / openocd.git / blobdiff