armv7a: ARMv7-A MMU tools
[openocd.git] / src / target / arm.h
index d63ead215159d5e430d0a6de75b2e0e5a44c8275..316ff9ab848e433ecb67da02b64ae47cb8d5c749 100644 (file)
@@ -8,6 +8,9 @@
  * Copyright (C) 2009 by Ã˜yvind Harboe
  * oyvind.harboe@zylin.com
  *
+ * Copyright (C) 2018 by Liviu Ionescu
+ *   <ilg@livius.net>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -28,7 +31,6 @@
 #include <helper/command.h>
 #include "target.h"
 
-
 /**
  * @file
  * Holds the interface to ARM cores.
@@ -66,18 +68,54 @@ enum arm_mode {
        ARM_MODE_USER_THREAD = 1,
        ARM_MODE_HANDLER = 2,
 
-       /* shift left 4 bits for armv8 64 */
-       ARMV8_64_EL0T = 0x0F,
-       ARMV8_64_EL1T = 0x4F,
-       ARMV8_64_EL1H = 0x5F,
-       ARMV8_64_EL2T = 0x8F,
-       ARMV8_64_EL2H = 0x9F,
-       ARMV8_64_EL3T = 0xCF,
-       ARMV8_64_EL3H = 0xDF,
+       ARMV8_64_EL0T = 0x0,
+       ARMV8_64_EL1T = 0x4,
+       ARMV8_64_EL1H = 0x5,
+       ARMV8_64_EL2T = 0x8,
+       ARMV8_64_EL2H = 0x9,
+       ARMV8_64_EL3T = 0xC,
+       ARMV8_64_EL3H = 0xD,
 
        ARM_MODE_ANY = -1
 };
 
+/* VFPv3 internal register numbers mapping to d0:31 */
+enum {
+       ARM_VFP_V3_D0 = 51,
+       ARM_VFP_V3_D1,
+       ARM_VFP_V3_D2,
+       ARM_VFP_V3_D3,
+       ARM_VFP_V3_D4,
+       ARM_VFP_V3_D5,
+       ARM_VFP_V3_D6,
+       ARM_VFP_V3_D7,
+       ARM_VFP_V3_D8,
+       ARM_VFP_V3_D9,
+       ARM_VFP_V3_D10,
+       ARM_VFP_V3_D11,
+       ARM_VFP_V3_D12,
+       ARM_VFP_V3_D13,
+       ARM_VFP_V3_D14,
+       ARM_VFP_V3_D15,
+       ARM_VFP_V3_D16,
+       ARM_VFP_V3_D17,
+       ARM_VFP_V3_D18,
+       ARM_VFP_V3_D19,
+       ARM_VFP_V3_D20,
+       ARM_VFP_V3_D21,
+       ARM_VFP_V3_D22,
+       ARM_VFP_V3_D23,
+       ARM_VFP_V3_D24,
+       ARM_VFP_V3_D25,
+       ARM_VFP_V3_D26,
+       ARM_VFP_V3_D27,
+       ARM_VFP_V3_D28,
+       ARM_VFP_V3_D29,
+       ARM_VFP_V3_D30,
+       ARM_VFP_V3_D31,
+       ARM_VFP_V3_FPSCR,
+};
+
 const char *arm_mode_name(unsigned psr_mode);
 bool is_arm_mode(unsigned psr_mode);
 
@@ -90,6 +128,14 @@ enum arm_state {
        ARM_STATE_AARCH64,
 };
 
+/** ARM vector floating point enabled, if yes which version. */
+enum arm_vfp_version {
+       ARM_VFP_DISABLED,
+       ARM_VFP_V1,
+       ARM_VFP_V2,
+       ARM_VFP_V3,
+};
+
 #define ARM_COMMON_MAGIC 0x0A450A45
 
 /**
@@ -137,23 +183,8 @@ struct arm {
        /** Flag reporting armv6m based core. */
        bool is_armv6m;
 
-       /** Flag reporting whether semihosting is active. */
-       bool is_semihosting;
-
-       /** Flag reporting whether semihosting fileio is active. */
-       bool is_semihosting_fileio;
-
-       /** Flag reporting whether semihosting fileio operation is active. */
-       bool semihosting_hit_fileio;
-
-       /** Current semihosting operation. */
-       int semihosting_op;
-
-       /** Current semihosting result. */
-       int semihosting_result;
-
-       /** Value to be returned by semihosting SYS_ERRNO request. */
-       int semihosting_errno;
+       /** Floating point or VFP version, 0 if disabled. */
+       int arm_vfp_version;
 
        int (*setup_semihosting)(struct target *target, int enable);
 
@@ -223,7 +254,7 @@ struct arm_reg {
        enum arm_mode mode;
        struct target *target;
        struct arm *arm;
-       uint8_t value[8];
+       uint8_t value[16];
 };
 
 struct reg_cache *arm_build_reg_cache(struct target *target, struct arm *arm);
@@ -258,7 +289,7 @@ int armv4_5_run_algorithm_inner(struct target *target,
 int arm_checksum_memory(struct target *target,
                target_addr_t address, uint32_t count, uint32_t *checksum);
 int arm_blank_check_memory(struct target *target,
-               target_addr_t address, uint32_t count, uint32_t *blank, uint8_t erased_value);
+               struct target_memory_check_block *blocks, int num_blocks, uint8_t erased_value);
 
 void arm_set_cpsr(struct arm *arm, uint32_t cpsr);
 struct reg *arm_reg_current(struct arm *arm, unsigned regnum);

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)