/***************************************************************************
* Copyright (C) 2008 digenius technology GmbH. *
+ * Michael Bruck *
+ * *
+ * Copyright (C) 2008,2009 Oyvind Harboe oyvind.harboe@zylin.com *
+ * *
+ * Copyright (C) 2008 Georg Acher <acher@in.tum.de> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
#endif
#include "arm11.h"
-#include "jtag.h"
-#include "log.h"
+#include "arm11_dbgtap.h"
+#include "armv4_5.h"
+#include "arm_simulator.h"
+#include "time_support.h"
+#include "target_type.h"
-#include <stdlib.h>
-#include <string.h>
#if 0
#define _DEBUG_INSTRUCTION_EXECUTION_
#endif
-
#if 0
-#define FNC_INFO DEBUG("-")
+#define FNC_INFO LOG_DEBUG("-")
#else
#define FNC_INFO
#endif
#if 1
-#define FNC_INFO_NOTIMPLEMENTED do { DEBUG("NOT IMPLEMENTED"); /*exit(-1);*/ } while (0)
+#define FNC_INFO_NOTIMPLEMENTED do { LOG_DEBUG("NOT IMPLEMENTED"); /*exit(-1);*/ } while (0)
#else
#define FNC_INFO_NOTIMPLEMENTED
#endif
-static void arm11_on_enter_debug_state(arm11_common_t * arm11);
-
-
-bool arm11_config_memwrite_burst = true;
-bool arm11_config_memwrite_error_fatal = true;
-u32 arm11_vcr = 0;
-
-
-#define ARM11_HANDLER(x) \
- .x = arm11_##x
-
-target_type_t arm11_target =
-{
- .name = "arm11",
-
- ARM11_HANDLER(poll),
- ARM11_HANDLER(arch_state),
-
- ARM11_HANDLER(target_request_data),
-
- ARM11_HANDLER(halt),
- ARM11_HANDLER(resume),
- ARM11_HANDLER(step),
-
- ARM11_HANDLER(assert_reset),
- ARM11_HANDLER(deassert_reset),
- ARM11_HANDLER(soft_reset_halt),
- ARM11_HANDLER(prepare_reset_halt),
-
- ARM11_HANDLER(get_gdb_reg_list),
-
- ARM11_HANDLER(read_memory),
- ARM11_HANDLER(write_memory),
-
- ARM11_HANDLER(bulk_write_memory),
-
- ARM11_HANDLER(checksum_memory),
-
- ARM11_HANDLER(add_breakpoint),
- ARM11_HANDLER(remove_breakpoint),
- ARM11_HANDLER(add_watchpoint),
- ARM11_HANDLER(remove_watchpoint),
-
- ARM11_HANDLER(run_algorithm),
-
- ARM11_HANDLER(register_commands),
- ARM11_HANDLER(target_command),
- ARM11_HANDLER(init_target),
- ARM11_HANDLER(quit),
-};
-
-int arm11_regs_arch_type = -1;
+static bool arm11_config_memwrite_burst = true;
+static bool arm11_config_memwrite_error_fatal = true;
+static uint32_t arm11_vcr = 0;
+static bool arm11_config_step_irq_enable = false;
+static bool arm11_config_hardware_step = false;
+static int arm11_regs_arch_type = -1;
enum arm11_regtype
{
- ARM11_REGISTER_CORE,
- ARM11_REGISTER_CPSR,
-
- ARM11_REGISTER_FX,
- ARM11_REGISTER_FPS,
-
- ARM11_REGISTER_FIQ,
- ARM11_REGISTER_SVC,
- ARM11_REGISTER_ABT,
- ARM11_REGISTER_IRQ,
- ARM11_REGISTER_UND,
- ARM11_REGISTER_MON,
-
- ARM11_REGISTER_SPSR_FIQ,
- ARM11_REGISTER_SPSR_SVC,
- ARM11_REGISTER_SPSR_ABT,
- ARM11_REGISTER_SPSR_IRQ,
- ARM11_REGISTER_SPSR_UND,
- ARM11_REGISTER_SPSR_MON,
-
- /* debug regs */
- ARM11_REGISTER_DSCR,
- ARM11_REGISTER_WDTR,
- ARM11_REGISTER_RDTR,
+ ARM11_REGISTER_CORE,
+ ARM11_REGISTER_CPSR,
+
+ ARM11_REGISTER_FX,
+ ARM11_REGISTER_FPS,
+
+ ARM11_REGISTER_FIQ,
+ ARM11_REGISTER_SVC,
+ ARM11_REGISTER_ABT,
+ ARM11_REGISTER_IRQ,
+ ARM11_REGISTER_UND,
+ ARM11_REGISTER_MON,
+
+ ARM11_REGISTER_SPSR_FIQ,
+ ARM11_REGISTER_SPSR_SVC,
+ ARM11_REGISTER_SPSR_ABT,
+ ARM11_REGISTER_SPSR_IRQ,
+ ARM11_REGISTER_SPSR_UND,
+ ARM11_REGISTER_SPSR_MON,
+
+ /* debug regs */
+ ARM11_REGISTER_DSCR,
+ ARM11_REGISTER_WDTR,
+ ARM11_REGISTER_RDTR,
};
-typedef struct arm11_reg_defs_s
+struct arm11_reg_defs
{
- char * name;
- u32 num;
- int gdb_num;
- enum arm11_regtype type;
-} arm11_reg_defs_t;
+ char * name;
+ uint32_t num;
+ int gdb_num;
+ enum arm11_regtype type;
+};
/* update arm11_regcache_ids when changing this */
-static const arm11_reg_defs_t arm11_reg_defs[] =
+static const struct arm11_reg_defs arm11_reg_defs[] =
{
- {"r0", 0, 0, ARM11_REGISTER_CORE},
- {"r1", 1, 1, ARM11_REGISTER_CORE},
- {"r2", 2, 2, ARM11_REGISTER_CORE},
- {"r3", 3, 3, ARM11_REGISTER_CORE},
- {"r4", 4, 4, ARM11_REGISTER_CORE},
- {"r5", 5, 5, ARM11_REGISTER_CORE},
- {"r6", 6, 6, ARM11_REGISTER_CORE},
- {"r7", 7, 7, ARM11_REGISTER_CORE},
- {"r8", 8, 8, ARM11_REGISTER_CORE},
- {"r9", 9, 9, ARM11_REGISTER_CORE},
- {"r10", 10, 10, ARM11_REGISTER_CORE},
- {"r11", 11, 11, ARM11_REGISTER_CORE},
- {"r12", 12, 12, ARM11_REGISTER_CORE},
- {"sp", 13, 13, ARM11_REGISTER_CORE},
- {"lr", 14, 14, ARM11_REGISTER_CORE},
- {"pc", 15, 15, ARM11_REGISTER_CORE},
+ {"r0", 0, 0, ARM11_REGISTER_CORE},
+ {"r1", 1, 1, ARM11_REGISTER_CORE},
+ {"r2", 2, 2, ARM11_REGISTER_CORE},
+ {"r3", 3, 3, ARM11_REGISTER_CORE},
+ {"r4", 4, 4, ARM11_REGISTER_CORE},
+ {"r5", 5, 5, ARM11_REGISTER_CORE},
+ {"r6", 6, 6, ARM11_REGISTER_CORE},
+ {"r7", 7, 7, ARM11_REGISTER_CORE},
+ {"r8", 8, 8, ARM11_REGISTER_CORE},
+ {"r9", 9, 9, ARM11_REGISTER_CORE},
+ {"r10", 10, 10, ARM11_REGISTER_CORE},
+ {"r11", 11, 11, ARM11_REGISTER_CORE},
+ {"r12", 12, 12, ARM11_REGISTER_CORE},
+ {"sp", 13, 13, ARM11_REGISTER_CORE},
+ {"lr", 14, 14, ARM11_REGISTER_CORE},
+ {"pc", 15, 15, ARM11_REGISTER_CORE},
#if ARM11_REGCACHE_FREGS
- {"f0", 0, 16, ARM11_REGISTER_FX},
- {"f1", 1, 17, ARM11_REGISTER_FX},
- {"f2", 2, 18, ARM11_REGISTER_FX},
- {"f3", 3, 19, ARM11_REGISTER_FX},
- {"f4", 4, 20, ARM11_REGISTER_FX},
- {"f5", 5, 21, ARM11_REGISTER_FX},
- {"f6", 6, 22, ARM11_REGISTER_FX},
- {"f7", 7, 23, ARM11_REGISTER_FX},
- {"fps", 0, 24, ARM11_REGISTER_FPS},
+ {"f0", 0, 16, ARM11_REGISTER_FX},
+ {"f1", 1, 17, ARM11_REGISTER_FX},
+ {"f2", 2, 18, ARM11_REGISTER_FX},
+ {"f3", 3, 19, ARM11_REGISTER_FX},
+ {"f4", 4, 20, ARM11_REGISTER_FX},
+ {"f5", 5, 21, ARM11_REGISTER_FX},
+ {"f6", 6, 22, ARM11_REGISTER_FX},
+ {"f7", 7, 23, ARM11_REGISTER_FX},
+ {"fps", 0, 24, ARM11_REGISTER_FPS},
#endif
- {"cpsr", 0, 25, ARM11_REGISTER_CPSR},
+ {"cpsr", 0, 25, ARM11_REGISTER_CPSR},
#if ARM11_REGCACHE_MODEREGS
- {"r8_fiq", 8, -1, ARM11_REGISTER_FIQ},
- {"r9_fiq", 9, -1, ARM11_REGISTER_FIQ},
- {"r10_fiq", 10, -1, ARM11_REGISTER_FIQ},
- {"r11_fiq", 11, -1, ARM11_REGISTER_FIQ},
- {"r12_fiq", 12, -1, ARM11_REGISTER_FIQ},
- {"r13_fiq", 13, -1, ARM11_REGISTER_FIQ},
- {"r14_fiq", 14, -1, ARM11_REGISTER_FIQ},
- {"spsr_fiq", 0, -1, ARM11_REGISTER_SPSR_FIQ},
-
- {"r13_svc", 13, -1, ARM11_REGISTER_SVC},
- {"r14_svc", 14, -1, ARM11_REGISTER_SVC},
- {"spsr_svc", 0, -1, ARM11_REGISTER_SPSR_SVC},
-
- {"r13_abt", 13, -1, ARM11_REGISTER_ABT},
- {"r14_abt", 14, -1, ARM11_REGISTER_ABT},
- {"spsr_abt", 0, -1, ARM11_REGISTER_SPSR_ABT},
-
- {"r13_irq", 13, -1, ARM11_REGISTER_IRQ},
- {"r14_irq", 14, -1, ARM11_REGISTER_IRQ},
- {"spsr_irq", 0, -1, ARM11_REGISTER_SPSR_IRQ},
-
- {"r13_und", 13, -1, ARM11_REGISTER_UND},
- {"r14_und", 14, -1, ARM11_REGISTER_UND},
- {"spsr_und", 0, -1, ARM11_REGISTER_SPSR_UND},
-
- /* ARM1176 only */
- {"r13_mon", 13, -1, ARM11_REGISTER_MON},
- {"r14_mon", 14, -1, ARM11_REGISTER_MON},
- {"spsr_mon", 0, -1, ARM11_REGISTER_SPSR_MON},
+ {"r8_fiq", 8, -1, ARM11_REGISTER_FIQ},
+ {"r9_fiq", 9, -1, ARM11_REGISTER_FIQ},
+ {"r10_fiq", 10, -1, ARM11_REGISTER_FIQ},
+ {"r11_fiq", 11, -1, ARM11_REGISTER_FIQ},
+ {"r12_fiq", 12, -1, ARM11_REGISTER_FIQ},
+ {"r13_fiq", 13, -1, ARM11_REGISTER_FIQ},
+ {"r14_fiq", 14, -1, ARM11_REGISTER_FIQ},
+ {"spsr_fiq", 0, -1, ARM11_REGISTER_SPSR_FIQ},
+
+ {"r13_svc", 13, -1, ARM11_REGISTER_SVC},
+ {"r14_svc", 14, -1, ARM11_REGISTER_SVC},
+ {"spsr_svc", 0, -1, ARM11_REGISTER_SPSR_SVC},
+
+ {"r13_abt", 13, -1, ARM11_REGISTER_ABT},
+ {"r14_abt", 14, -1, ARM11_REGISTER_ABT},
+ {"spsr_abt", 0, -1, ARM11_REGISTER_SPSR_ABT},
+
+ {"r13_irq", 13, -1, ARM11_REGISTER_IRQ},
+ {"r14_irq", 14, -1, ARM11_REGISTER_IRQ},
+ {"spsr_irq", 0, -1, ARM11_REGISTER_SPSR_IRQ},
+
+ {"r13_und", 13, -1, ARM11_REGISTER_UND},
+ {"r14_und", 14, -1, ARM11_REGISTER_UND},
+ {"spsr_und", 0, -1, ARM11_REGISTER_SPSR_UND},
+
+ /* ARM1176 only */
+ {"r13_mon", 13, -1, ARM11_REGISTER_MON},
+ {"r14_mon", 14, -1, ARM11_REGISTER_MON},
+ {"spsr_mon", 0, -1, ARM11_REGISTER_SPSR_MON},
#endif
- /* Debug Registers */
- {"dscr", 0, -1, ARM11_REGISTER_DSCR},
- {"wdtr", 0, -1, ARM11_REGISTER_WDTR},
- {"rdtr", 0, -1, ARM11_REGISTER_RDTR},
+ /* Debug Registers */
+ {"dscr", 0, -1, ARM11_REGISTER_DSCR},
+ {"wdtr", 0, -1, ARM11_REGISTER_WDTR},
+ {"rdtr", 0, -1, ARM11_REGISTER_RDTR},
};
enum arm11_regcache_ids
{
- ARM11_RC_R0,
- ARM11_RC_RX = ARM11_RC_R0,
-
- ARM11_RC_R1,
- ARM11_RC_R2,
- ARM11_RC_R3,
- ARM11_RC_R4,
- ARM11_RC_R5,
- ARM11_RC_R6,
- ARM11_RC_R7,
- ARM11_RC_R8,
- ARM11_RC_R9,
- ARM11_RC_R10,
- ARM11_RC_R11,
- ARM11_RC_R12,
- ARM11_RC_R13,
- ARM11_RC_SP = ARM11_RC_R13,
- ARM11_RC_R14,
- ARM11_RC_LR = ARM11_RC_R14,
- ARM11_RC_R15,
- ARM11_RC_PC = ARM11_RC_R15,
+ ARM11_RC_R0,
+ ARM11_RC_RX = ARM11_RC_R0,
+
+ ARM11_RC_R1,
+ ARM11_RC_R2,
+ ARM11_RC_R3,
+ ARM11_RC_R4,
+ ARM11_RC_R5,
+ ARM11_RC_R6,
+ ARM11_RC_R7,
+ ARM11_RC_R8,
+ ARM11_RC_R9,
+ ARM11_RC_R10,
+ ARM11_RC_R11,
+ ARM11_RC_R12,
+ ARM11_RC_R13,
+ ARM11_RC_SP = ARM11_RC_R13,
+ ARM11_RC_R14,
+ ARM11_RC_LR = ARM11_RC_R14,
+ ARM11_RC_R15,
+ ARM11_RC_PC = ARM11_RC_R15,
#if ARM11_REGCACHE_FREGS
- ARM11_RC_F0,
- ARM11_RC_FX = ARM11_RC_F0,
- ARM11_RC_F1,
- ARM11_RC_F2,
- ARM11_RC_F3,
- ARM11_RC_F4,
- ARM11_RC_F5,
- ARM11_RC_F6,
- ARM11_RC_F7,
- ARM11_RC_FPS,
+ ARM11_RC_F0,
+ ARM11_RC_FX = ARM11_RC_F0,
+ ARM11_RC_F1,
+ ARM11_RC_F2,
+ ARM11_RC_F3,
+ ARM11_RC_F4,
+ ARM11_RC_F5,
+ ARM11_RC_F6,
+ ARM11_RC_F7,
+ ARM11_RC_FPS,
#endif
- ARM11_RC_CPSR,
+ ARM11_RC_CPSR,
#if ARM11_REGCACHE_MODEREGS
- ARM11_RC_R8_FIQ,
- ARM11_RC_R9_FIQ,
- ARM11_RC_R10_FIQ,
- ARM11_RC_R11_FIQ,
- ARM11_RC_R12_FIQ,
- ARM11_RC_R13_FIQ,
- ARM11_RC_R14_FIQ,
- ARM11_RC_SPSR_FIQ,
-
- ARM11_RC_R13_SVC,
- ARM11_RC_R14_SVC,
- ARM11_RC_SPSR_SVC,
-
- ARM11_RC_R13_ABT,
- ARM11_RC_R14_ABT,
- ARM11_RC_SPSR_ABT,
-
- ARM11_RC_R13_IRQ,
- ARM11_RC_R14_IRQ,
- ARM11_RC_SPSR_IRQ,
-
- ARM11_RC_R13_UND,
- ARM11_RC_R14_UND,
- ARM11_RC_SPSR_UND,
-
- ARM11_RC_R13_MON,
- ARM11_RC_R14_MON,
- ARM11_RC_SPSR_MON,
+ ARM11_RC_R8_FIQ,
+ ARM11_RC_R9_FIQ,
+ ARM11_RC_R10_FIQ,
+ ARM11_RC_R11_FIQ,
+ ARM11_RC_R12_FIQ,
+ ARM11_RC_R13_FIQ,
+ ARM11_RC_R14_FIQ,
+ ARM11_RC_SPSR_FIQ,
+
+ ARM11_RC_R13_SVC,
+ ARM11_RC_R14_SVC,
+ ARM11_RC_SPSR_SVC,
+
+ ARM11_RC_R13_ABT,
+ ARM11_RC_R14_ABT,
+ ARM11_RC_SPSR_ABT,
+
+ ARM11_RC_R13_IRQ,
+ ARM11_RC_R14_IRQ,
+ ARM11_RC_SPSR_IRQ,
+
+ ARM11_RC_R13_UND,
+ ARM11_RC_R14_UND,
+ ARM11_RC_SPSR_UND,
+
+ ARM11_RC_R13_MON,
+ ARM11_RC_R14_MON,
+ ARM11_RC_SPSR_MON,
#endif
- ARM11_RC_DSCR,
- ARM11_RC_WDTR,
- ARM11_RC_RDTR,
+ ARM11_RC_DSCR,
+ ARM11_RC_WDTR,
+ ARM11_RC_RDTR,
- ARM11_RC_MAX,
+ ARM11_RC_MAX,
};
#define ARM11_GDB_REGISTER_COUNT 26
-u8 arm11_gdb_dummy_fp_value[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+static uint8_t arm11_gdb_dummy_fp_value[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-reg_t arm11_gdb_dummy_fp_reg =
+static reg_t arm11_gdb_dummy_fp_reg =
{
- "GDB dummy floating-point register", arm11_gdb_dummy_fp_value, 0, 1, 96, NULL, 0, NULL, 0
+ "GDB dummy floating-point register", arm11_gdb_dummy_fp_value, 0, 1, 96, NULL, 0, NULL, 0
};
-u8 arm11_gdb_dummy_fps_value[] = {0, 0, 0, 0};
+static uint8_t arm11_gdb_dummy_fps_value[] = {0, 0, 0, 0};
-reg_t arm11_gdb_dummy_fps_reg =
+static reg_t arm11_gdb_dummy_fps_reg =
{
- "GDB dummy floating-point status register", arm11_gdb_dummy_fps_value, 0, 1, 32, NULL, 0, NULL, 0
+ "GDB dummy floating-point status register", arm11_gdb_dummy_fps_value, 0, 1, 32, NULL, 0, NULL, 0
};
+static int arm11_on_enter_debug_state(struct arm11_common *arm11);
+static int arm11_step(struct target_s *target, int current,
+ uint32_t address, int handle_breakpoints);
+/* helpers */
+static int arm11_build_reg_cache(target_t *target);
+static int arm11_set_reg(reg_t *reg, uint8_t *buf);
+static int arm11_get_reg(reg_t *reg);
+
+static void arm11_record_register_history(struct arm11_common * arm11);
+static void arm11_dump_reg_changes(struct arm11_common * arm11);
+
/** Check and if necessary take control of the system
*
* \param arm11 Target state variable.
* \param dscr If the current DSCR content is
- * available a pointer to a word holding the
- * DSCR can be passed. Otherwise use NULL.
+ * available a pointer to a word holding the
+ * DSCR can be passed. Otherwise use NULL.
*/
-void arm11_check_init(arm11_common_t * arm11, u32 * dscr)
+static int arm11_check_init(struct arm11_common *arm11, uint32_t *dscr)
{
- FNC_INFO;
+ FNC_INFO;
+
+ uint32_t dscr_local_tmp_copy;
+
+ if (!dscr)
+ {
+ dscr = &dscr_local_tmp_copy;
- u32 dscr_local_tmp_copy;
+ CHECK_RETVAL(arm11_read_DSCR(arm11, dscr));
+ }
- if (!dscr)
- {
- dscr = &dscr_local_tmp_copy;
- *dscr = arm11_read_DSCR(arm11);
- }
+ if (!(*dscr & ARM11_DSCR_MODE_SELECT))
+ {
+ LOG_DEBUG("Bringing target into debug mode");
- if (!(*dscr & ARM11_DSCR_MODE_SELECT))
- {
- DEBUG("Bringing target into debug mode");
+ *dscr |= ARM11_DSCR_MODE_SELECT; /* Halt debug-mode */
+ arm11_write_DSCR(arm11, *dscr);
- *dscr |= ARM11_DSCR_MODE_SELECT; /* Halt debug-mode */
- arm11_write_DSCR(arm11, *dscr);
+ /* add further reset initialization here */
- /* add further reset initialization here */
+ arm11->simulate_reset_on_next_halt = true;
- arm11->simulate_reset_on_next_halt = true;
+ if (*dscr & ARM11_DSCR_CORE_HALTED)
+ {
+ /** \todo TODO: this needs further scrutiny because
+ * arm11_on_enter_debug_state() never gets properly called.
+ * As a result we don't read the actual register states from
+ * the target.
+ */
- if (*dscr & ARM11_DSCR_CORE_HALTED)
- {
- /** \todo TODO: this needs further scrutiny because
- * arm11_on_enter_debug_state() never gets properly called
- */
+ arm11->target->state = TARGET_HALTED;
+ arm11->target->debug_reason = arm11_get_DSCR_debug_reason(*dscr);
+ }
+ else
+ {
+ arm11->target->state = TARGET_RUNNING;
+ arm11->target->debug_reason = DBG_REASON_NOTHALTED;
+ }
- arm11->target->state = TARGET_HALTED;
- arm11->target->debug_reason = arm11_get_DSCR_debug_reason(*dscr);
- }
- else
- {
- arm11->target->state = TARGET_RUNNING;
- arm11->target->debug_reason = DBG_REASON_NOTHALTED;
+ arm11_sc7_clear_vbw(arm11);
}
- arm11_sc7_clear_vbw(arm11);
- }
+ return ERROR_OK;
}
#define R(x) \
- (arm11->reg_values[ARM11_RC_##x])
+ (arm11->reg_values[ARM11_RC_##x])
/** Save processor state.
*
* or on other occasions that stop the processor.
*
*/
-static void arm11_on_enter_debug_state(arm11_common_t * arm11)
+static int arm11_on_enter_debug_state(struct arm11_common *arm11)
{
- FNC_INFO;
-
- {size_t i;
- for(i = 0; i < asizeof(arm11->reg_values); i++)
- {
- arm11->reg_list[i].valid = 1;
- arm11->reg_list[i].dirty = 0;
- }}
+ int retval;
+ FNC_INFO;
- /* Save DSCR */
+ for (size_t i = 0; i < asizeof(arm11->reg_values); i++)
+ {
+ arm11->reg_list[i].valid = 1;
+ arm11->reg_list[i].dirty = 0;
+ }
- R(DSCR) = arm11_read_DSCR(arm11);
+ /* Save DSCR */
+ CHECK_RETVAL(arm11_read_DSCR(arm11, &R(DSCR)));
- /* Save wDTR */
+ /* Save wDTR */
- if (R(DSCR) & ARM11_DSCR_WDTR_FULL)
- {
- arm11_add_debug_SCAN_N(arm11, 0x05, -1);
+ if (R(DSCR) & ARM11_DSCR_WDTR_FULL)
+ {
+ arm11_add_debug_SCAN_N(arm11, 0x05, ARM11_TAP_DEFAULT);
- arm11_add_IR(arm11, ARM11_INTEST, -1);
+ arm11_add_IR(arm11, ARM11_INTEST, ARM11_TAP_DEFAULT);
- scan_field_t chain5_fields[3];
+ struct scan_field chain5_fields[3];
- arm11_setup_field(arm11, 32, NULL, &R(WDTR), chain5_fields + 0);
- arm11_setup_field(arm11, 1, NULL, NULL, chain5_fields + 1);
- arm11_setup_field(arm11, 1, NULL, NULL, chain5_fields + 2);
+ arm11_setup_field(arm11, 32, NULL, &R(WDTR), chain5_fields + 0);
+ arm11_setup_field(arm11, 1, NULL, NULL, chain5_fields + 1);
+ arm11_setup_field(arm11, 1, NULL, NULL, chain5_fields + 2);
- arm11_add_dr_scan_vc(asizeof(chain5_fields), chain5_fields, TAP_PD);
- }
- else
- {
- arm11->reg_list[ARM11_RC_WDTR].valid = 0;
- }
+ arm11_add_dr_scan_vc(asizeof(chain5_fields), chain5_fields, TAP_DRPAUSE);
+ }
+ else
+ {
+ arm11->reg_list[ARM11_RC_WDTR].valid = 0;
+ }
- /* DSCR: set ARM11_DSCR_EXECUTE_ARM_INSTRUCTION_ENABLE */
- /* ARM1176 spec says this is needed only for wDTR/rDTR's "ITR mode", but not to issue ITRs
- ARM1136 seems to require this to issue ITR's as well */
+ /* DSCR: set ARM11_DSCR_EXECUTE_ARM_INSTRUCTION_ENABLE */
+ /* ARM1176 spec says this is needed only for wDTR/rDTR's "ITR mode", but not to issue ITRs
+ ARM1136 seems to require this to issue ITR's as well */
- u32 new_dscr = R(DSCR) | ARM11_DSCR_EXECUTE_ARM_INSTRUCTION_ENABLE;
+ uint32_t new_dscr = R(DSCR) | ARM11_DSCR_EXECUTE_ARM_INSTRUCTION_ENABLE;
- /* this executes JTAG queue: */
+ /* this executes JTAG queue: */
- arm11_write_DSCR(arm11, new_dscr);
+ arm11_write_DSCR(arm11, new_dscr);
- /* From the spec:
- Before executing any instruction in debug state you have to drain the write buffer.
- This ensures that no imprecise Data Aborts can return at a later point:*/
+ /* From the spec:
+ Before executing any instruction in debug state you have to drain the write buffer.
+ This ensures that no imprecise Data Aborts can return at a later point:*/
- /** \todo TODO: Test drain write buffer. */
+ /** \todo TODO: Test drain write buffer. */
#if 0
- while (1)
- {
- /* MRC p14,0,R0,c5,c10,0 */
-// arm11_run_instr_no_data1(arm11, /*0xee150e1a*/0xe320f000);
-
- /* mcr 15, 0, r0, cr7, cr10, {4} */
- arm11_run_instr_no_data1(arm11, 0xee070f9a);
-
- u32 dscr = arm11_read_DSCR(arm11);
-
- DEBUG("DRAIN, DSCR %08x", dscr);
-
- if (dscr & ARM11_DSCR_STICKY_IMPRECISE_DATA_ABORT)
+ while (1)
{
- arm11_run_instr_no_data1(arm11, 0xe320f000);
+ /* MRC p14,0,R0,c5,c10,0 */
+ // arm11_run_instr_no_data1(arm11, /*0xee150e1a*/0xe320f000);
- dscr = arm11_read_DSCR(arm11);
+ /* mcr 15, 0, r0, cr7, cr10, {4} */
+ arm11_run_instr_no_data1(arm11, 0xee070f9a);
- DEBUG("DRAIN, DSCR %08x (DONE)", dscr);
+ uint32_t dscr = arm11_read_DSCR(arm11);
- break;
- }
- }
-#endif
+ LOG_DEBUG("DRAIN, DSCR %08x", dscr);
+ if (dscr & ARM11_DSCR_STICKY_IMPRECISE_DATA_ABORT)
+ {
+ arm11_run_instr_no_data1(arm11, 0xe320f000);
- arm11_run_instr_data_prepare(arm11);
+ dscr = arm11_read_DSCR(arm11);
- /* save r0 - r14 */
+ LOG_DEBUG("DRAIN, DSCR %08x (DONE)", dscr);
+ break;
+ }
+ }
+#endif
- /** \todo TODO: handle other mode registers */
+ retval = arm11_run_instr_data_prepare(arm11);
+ if (retval != ERROR_OK)
+ return retval;
- {size_t i;
- for (i = 0; i < 15; i++)
- {
- /* MCR p14,0,R?,c0,c5,0 */
- arm11_run_instr_data_from_core(arm11, 0xEE000E15 | (i << 12), &R(RX + i), 1);
- }}
+ /* save r0 - r14 */
+ /** \todo TODO: handle other mode registers */
- /* save rDTR */
+ for (size_t i = 0; i < 15; i++)
+ {
+ /* MCR p14,0,R?,c0,c5,0 */
+ retval = arm11_run_instr_data_from_core(arm11, 0xEE000E15 | (i << 12), &R(RX + i), 1);
+ if (retval != ERROR_OK)
+ return retval;
+ }
- /* check rDTRfull in DSCR */
+ /* save rDTR */
- if (R(DSCR) & ARM11_DSCR_RDTR_FULL)
- {
- /* MRC p14,0,R0,c0,c5,0 (move rDTR -> r0 (-> wDTR -> local var)) */
- arm11_run_instr_data_from_core_via_r0(arm11, 0xEE100E15, &R(RDTR));
- }
- else
- {
- arm11->reg_list[ARM11_RC_RDTR].valid = 0;
- }
+ /* check rDTRfull in DSCR */
- /* save CPSR */
+ if (R(DSCR) & ARM11_DSCR_RDTR_FULL)
+ {
+ /* MRC p14,0,R0,c0,c5,0 (move rDTR -> r0 (-> wDTR -> local var)) */
+ retval = arm11_run_instr_data_from_core_via_r0(arm11, 0xEE100E15, &R(RDTR));
+ if (retval != ERROR_OK)
+ return retval;
+ }
+ else
+ {
+ arm11->reg_list[ARM11_RC_RDTR].valid = 0;
+ }
- /* MRS r0,CPSR (move CPSR -> r0 (-> wDTR -> local var)) */
- arm11_run_instr_data_from_core_via_r0(arm11, 0xE10F0000, &R(CPSR));
+ /* save CPSR */
- /* save PC */
+ /* MRS r0,CPSR (move CPSR -> r0 (-> wDTR -> local var)) */
+ retval = arm11_run_instr_data_from_core_via_r0(arm11, 0xE10F0000, &R(CPSR));
+ if (retval != ERROR_OK)
+ return retval;
- /* MOV R0,PC (move PC -> r0 (-> wDTR -> local var)) */
- arm11_run_instr_data_from_core_via_r0(arm11, 0xE1A0000F, &R(PC));
+ /* save PC */
- /* adjust PC depending on ARM state */
+ /* MOV R0,PC (move PC -> r0 (-> wDTR -> local var)) */
+ retval = arm11_run_instr_data_from_core_via_r0(arm11, 0xE1A0000F, &R(PC));
+ if (retval != ERROR_OK)
+ return retval;
- if (R(CPSR) & ARM11_CPSR_J) /* Java state */
- {
- arm11->reg_values[ARM11_RC_PC] -= 0;
- }
- else if (R(CPSR) & ARM11_CPSR_T) /* Thumb state */
- {
- arm11->reg_values[ARM11_RC_PC] -= 4;
- }
- else /* ARM state */
- {
- arm11->reg_values[ARM11_RC_PC] -= 8;
- }
+ /* adjust PC depending on ARM state */
- if (arm11->simulate_reset_on_next_halt)
- {
- arm11->simulate_reset_on_next_halt = false;
+ if (R(CPSR) & ARM11_CPSR_J) /* Java state */
+ {
+ arm11->reg_values[ARM11_RC_PC] -= 0;
+ }
+ else if (R(CPSR) & ARM11_CPSR_T) /* Thumb state */
+ {
+ arm11->reg_values[ARM11_RC_PC] -= 4;
+ }
+ else /* ARM state */
+ {
+ arm11->reg_values[ARM11_RC_PC] -= 8;
+ }
- DEBUG("Reset c1 Control Register");
+ if (arm11->simulate_reset_on_next_halt)
+ {
+ arm11->simulate_reset_on_next_halt = false;
- /* Write 0 (reset value) to Control register 0 to disable MMU/Cache etc. */
+ LOG_DEBUG("Reset c1 Control Register");
- /* MCR p15,0,R0,c1,c0,0 */
- arm11_run_instr_data_to_core_via_r0(arm11, 0xee010f10, 0);
+ /* Write 0 (reset value) to Control register 0 to disable MMU/Cache etc. */
- }
+ /* MCR p15,0,R0,c1,c0,0 */
+ retval = arm11_run_instr_data_to_core_via_r0(arm11, 0xee010f10, 0);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+ retval = arm11_run_instr_data_finish(arm11);
+ if (retval != ERROR_OK)
+ return retval;
- arm11_run_instr_data_finish(arm11);
+ arm11_dump_reg_changes(arm11);
- arm11_dump_reg_changes(arm11);
+ return ERROR_OK;
}
-void arm11_dump_reg_changes(arm11_common_t * arm11)
+void arm11_dump_reg_changes(struct arm11_common * arm11)
{
- {size_t i;
- for(i = 0; i < ARM11_REGCACHE_COUNT; i++)
- {
- if (!arm11->reg_list[i].valid)
+
+ if (!(debug_level >= LOG_LVL_DEBUG))
{
- if (arm11->reg_history[i].valid)
- INFO("%8s INVALID (%08x)", arm11_reg_defs[i].name, arm11->reg_history[i].value);
+ return;
}
- else
+
+ for (size_t i = 0; i < ARM11_REGCACHE_COUNT; i++)
{
- if (arm11->reg_history[i].valid)
- {
- if (arm11->reg_history[i].value != arm11->reg_values[i])
- INFO("%8s %08x (%08x)", arm11_reg_defs[i].name, arm11->reg_values[i], arm11->reg_history[i].value);
- }
- else
- {
- INFO("%8s %08x (INVALID)", arm11_reg_defs[i].name, arm11->reg_values[i]);
- }
- }
- }}
+ if (!arm11->reg_list[i].valid)
+ {
+ if (arm11->reg_history[i].valid)
+ LOG_DEBUG("%8s INVALID (%08" PRIx32 ")", arm11_reg_defs[i].name, arm11->reg_history[i].value);
+ }
+ else
+ {
+ if (arm11->reg_history[i].valid)
+ {
+ if (arm11->reg_history[i].value != arm11->reg_values[i])
+ LOG_DEBUG("%8s %08" PRIx32 " (%08" PRIx32 ")", arm11_reg_defs[i].name, arm11->reg_values[i], arm11->reg_history[i].value);
+ }
+ else
+ {
+ LOG_DEBUG("%8s %08" PRIx32 " (INVALID)", arm11_reg_defs[i].name, arm11->reg_values[i]);
+ }
+ }
+ }
}
-
/** Restore processor state
*
* This is called in preparation for the RESTART function.
*
*/
-void arm11_leave_debug_state(arm11_common_t * arm11)
+static int arm11_leave_debug_state(struct arm11_common *arm11)
{
- FNC_INFO;
-
- arm11_run_instr_data_prepare(arm11);
+ FNC_INFO;
+ int retval;
- /** \todo TODO: handle other mode registers */
+ retval = arm11_run_instr_data_prepare(arm11);
+ if (retval != ERROR_OK)
+ return retval;
- /* restore R1 - R14 */
- {size_t i;
- for (i = 1; i < 15; i++)
- {
- if (!arm11->reg_list[ARM11_RC_RX + i].dirty)
- continue;
+ /** \todo TODO: handle other mode registers */
- /* MRC p14,0,r?,c0,c5,0 */
- arm11_run_instr_data_to_core1(arm11, 0xee100e15 | (i << 12), R(RX + i));
+ /* restore R1 - R14 */
-// DEBUG("RESTORE R" ZU " %08x", i, R(RX + i));
- }}
-
- arm11_run_instr_data_finish(arm11);
+ for (size_t i = 1; i < 15; i++)
+ {
+ if (!arm11->reg_list[ARM11_RC_RX + i].dirty)
+ continue;
+ /* MRC p14,0,r?,c0,c5,0 */
+ arm11_run_instr_data_to_core1(arm11, 0xee100e15 | (i << 12), R(RX + i));
- /* spec says clear wDTR and rDTR; we assume they are clear as
- otherwise our programming would be sloppy */
+ // LOG_DEBUG("RESTORE R" ZU " %08x", i, R(RX + i));
+ }
- {
- u32 DSCR = arm11_read_DSCR(arm11);
+ retval = arm11_run_instr_data_finish(arm11);
+ if (retval != ERROR_OK)
+ return retval;
- if (DSCR & (ARM11_DSCR_RDTR_FULL | ARM11_DSCR_WDTR_FULL))
+ /* spec says clear wDTR and rDTR; we assume they are clear as
+ otherwise our programming would be sloppy */
{
- ERROR("wDTR/rDTR inconsistent (DSCR %08x)", DSCR);
+ uint32_t DSCR;
+
+ CHECK_RETVAL(arm11_read_DSCR(arm11, &DSCR));
+
+ if (DSCR & (ARM11_DSCR_RDTR_FULL | ARM11_DSCR_WDTR_FULL))
+ {
+ /*
+ The wDTR/rDTR two registers that are used to send/receive data to/from
+ the core in tandem with corresponding instruction codes that are
+ written into the core. The RDTR FULL/WDTR FULL flag indicates that the
+ registers hold data that was written by one side (CPU or JTAG) and not
+ read out by the other side.
+ */
+ LOG_ERROR("wDTR/rDTR inconsistent (DSCR %08" PRIx32 ")", DSCR);
+ return ERROR_FAIL;
+ }
}
- }
- arm11_run_instr_data_prepare(arm11);
+ retval = arm11_run_instr_data_prepare(arm11);
+ if (retval != ERROR_OK)
+ return retval;
- /* restore original wDTR */
+ /* restore original wDTR */
- if ((R(DSCR) & ARM11_DSCR_WDTR_FULL) || arm11->reg_list[ARM11_RC_WDTR].dirty)
- {
- /* MCR p14,0,R0,c0,c5,0 */
- arm11_run_instr_data_to_core_via_r0(arm11, 0xee000e15, R(WDTR));
- }
+ if ((R(DSCR) & ARM11_DSCR_WDTR_FULL) || arm11->reg_list[ARM11_RC_WDTR].dirty)
+ {
+ /* MCR p14,0,R0,c0,c5,0 */
+ retval = arm11_run_instr_data_to_core_via_r0(arm11, 0xee000e15, R(WDTR));
+ if (retval != ERROR_OK)
+ return retval;
+ }
- /* restore CPSR */
+ /* restore CPSR */
- /* MSR CPSR,R0*/
- arm11_run_instr_data_to_core_via_r0(arm11, 0xe129f000, R(CPSR));
+ /* MSR CPSR,R0*/
+ retval = arm11_run_instr_data_to_core_via_r0(arm11, 0xe129f000, R(CPSR));
+ if (retval != ERROR_OK)
+ return retval;
- /* restore PC */
+ /* restore PC */
- /* MOV PC,R0 */
- arm11_run_instr_data_to_core_via_r0(arm11, 0xe1a0f000, R(PC));
+ /* MOV PC,R0 */
+ retval = arm11_run_instr_data_to_core_via_r0(arm11, 0xe1a0f000, R(PC));
+ if (retval != ERROR_OK)
+ return retval;
- /* restore R0 */
+ /* restore R0 */
- /* MRC p14,0,r0,c0,c5,0 */
- arm11_run_instr_data_to_core1(arm11, 0xee100e15, R(R0));
+ /* MRC p14,0,r0,c0,c5,0 */
+ arm11_run_instr_data_to_core1(arm11, 0xee100e15, R(R0));
- arm11_run_instr_data_finish(arm11);
+ retval = arm11_run_instr_data_finish(arm11);
+ if (retval != ERROR_OK)
+ return retval;
+ /* restore DSCR */
- /* restore DSCR */
+ arm11_write_DSCR(arm11, R(DSCR));
- arm11_write_DSCR(arm11, R(DSCR));
+ /* restore rDTR */
+ if (R(DSCR) & ARM11_DSCR_RDTR_FULL || arm11->reg_list[ARM11_RC_RDTR].dirty)
+ {
+ arm11_add_debug_SCAN_N(arm11, 0x05, ARM11_TAP_DEFAULT);
- /* restore rDTR */
-
- if (R(DSCR) & ARM11_DSCR_RDTR_FULL || arm11->reg_list[ARM11_RC_RDTR].dirty)
- {
- arm11_add_debug_SCAN_N(arm11, 0x05, -1);
+ arm11_add_IR(arm11, ARM11_EXTEST, ARM11_TAP_DEFAULT);
- arm11_add_IR(arm11, ARM11_EXTEST, -1);
+ struct scan_field chain5_fields[3];
- scan_field_t chain5_fields[3];
+ uint8_t Ready = 0; /* ignored */
+ uint8_t Valid = 0; /* ignored */
- u8 Ready = 0; /* ignored */
- u8 Valid = 0; /* ignored */
+ arm11_setup_field(arm11, 32, &R(RDTR), NULL, chain5_fields + 0);
+ arm11_setup_field(arm11, 1, &Ready, NULL, chain5_fields + 1);
+ arm11_setup_field(arm11, 1, &Valid, NULL, chain5_fields + 2);
- arm11_setup_field(arm11, 32, &R(RDTR), NULL, chain5_fields + 0);
- arm11_setup_field(arm11, 1, &Ready, NULL, chain5_fields + 1);
- arm11_setup_field(arm11, 1, &Valid, NULL, chain5_fields + 2);
+ arm11_add_dr_scan_vc(asizeof(chain5_fields), chain5_fields, TAP_DRPAUSE);
+ }
- arm11_add_dr_scan_vc(asizeof(chain5_fields), chain5_fields, TAP_PD);
- }
+ arm11_record_register_history(arm11);
- arm11_record_register_history(arm11);
+ return ERROR_OK;
}
-void arm11_record_register_history(arm11_common_t * arm11)
+static void arm11_record_register_history(struct arm11_common *arm11)
{
- {size_t i;
- for(i = 0; i < ARM11_REGCACHE_COUNT; i++)
- {
- arm11->reg_history[i].value = arm11->reg_values[i];
- arm11->reg_history[i].valid = arm11->reg_list[i].valid;
-
- arm11->reg_list[i].valid = 0;
- arm11->reg_list[i].dirty = 0;
- }}
+ for (size_t i = 0; i < ARM11_REGCACHE_COUNT; i++)
+ {
+ arm11->reg_history[i].value = arm11->reg_values[i];
+ arm11->reg_history[i].valid = arm11->reg_list[i].valid;
+
+ arm11->reg_list[i].valid = 0;
+ arm11->reg_list[i].dirty = 0;
+ }
}
/* poll current target status */
-int arm11_poll(struct target_s *target)
+static int arm11_poll(struct target_s *target)
{
- FNC_INFO;
+ FNC_INFO;
+ int retval;
- arm11_common_t * arm11 = target->arch_info;
+ struct arm11_common * arm11 = target->arch_info;
- if (arm11->trst_active)
- return ERROR_OK;
+ uint32_t dscr;
- u32 dscr = arm11_read_DSCR(arm11);
+ CHECK_RETVAL(arm11_read_DSCR(arm11, &dscr));
- DEBUG("DSCR %08x", dscr);
+ LOG_DEBUG("DSCR %08" PRIx32 "", dscr);
- arm11_check_init(arm11, &dscr);
+ CHECK_RETVAL(arm11_check_init(arm11, &dscr));
- if (dscr & ARM11_DSCR_CORE_HALTED)
- {
- if (target->state != TARGET_HALTED)
+ if (dscr & ARM11_DSCR_CORE_HALTED)
{
- enum target_state old_state = target->state;
-
- DEBUG("enter TARGET_HALTED");
- target->state = TARGET_HALTED;
- target->debug_reason = arm11_get_DSCR_debug_reason(dscr);
- arm11_on_enter_debug_state(arm11);
-
- target_call_event_callbacks(target,
- old_state == TARGET_DEBUG_RUNNING ? TARGET_EVENT_DEBUG_HALTED : TARGET_EVENT_HALTED);
+ if (target->state != TARGET_HALTED)
+ {
+ enum target_state old_state = target->state;
+
+ LOG_DEBUG("enter TARGET_HALTED");
+ target->state = TARGET_HALTED;
+ target->debug_reason = arm11_get_DSCR_debug_reason(dscr);
+ retval = arm11_on_enter_debug_state(arm11);
+ if (retval != ERROR_OK)
+ return retval;
+
+ target_call_event_callbacks(target,
+ old_state == TARGET_DEBUG_RUNNING ? TARGET_EVENT_DEBUG_HALTED : TARGET_EVENT_HALTED);
+ }
}
- }
- else
- {
- if (target->state != TARGET_RUNNING && target->state != TARGET_DEBUG_RUNNING)
+ else
{
- DEBUG("enter TARGET_RUNNING");
- target->state = TARGET_RUNNING;
- target->debug_reason = DBG_REASON_NOTHALTED;
+ if (target->state != TARGET_RUNNING && target->state != TARGET_DEBUG_RUNNING)
+ {
+ LOG_DEBUG("enter TARGET_RUNNING");
+ target->state = TARGET_RUNNING;
+ target->debug_reason = DBG_REASON_NOTHALTED;
+ }
}
- }
- return ERROR_OK;
+ return ERROR_OK;
}
/* architecture specific status reply */
-int arm11_arch_state(struct target_s *target)
+static int arm11_arch_state(struct target_s *target)
{
- FNC_INFO_NOTIMPLEMENTED;
+ struct arm11_common * arm11 = target->arch_info;
- return ERROR_OK;
-}
+ LOG_USER("target halted due to %s\ncpsr: 0x%8.8" PRIx32 " pc: 0x%8.8" PRIx32 "",
+ Jim_Nvp_value2name_simple(nvp_target_debug_reason, target->debug_reason)->name,
+ R(CPSR),
+ R(PC));
+ return ERROR_OK;
+}
/* target request support */
-int arm11_target_request_data(struct target_s *target, u32 size, u8 *buffer)
+static int arm11_target_request_data(struct target_s *target,
+ uint32_t size, uint8_t *buffer)
{
- FNC_INFO_NOTIMPLEMENTED;
+ FNC_INFO_NOTIMPLEMENTED;
- return ERROR_OK;
+ return ERROR_OK;
}
-
-
/* target execution control */
-int arm11_halt(struct target_s *target)
+static int arm11_halt(struct target_s *target)
{
- FNC_INFO;
+ FNC_INFO;
- arm11_common_t * arm11 = target->arch_info;
+ struct arm11_common * arm11 = target->arch_info;
- DEBUG("target->state: %s", target_state_strings[target->state]);
+ LOG_DEBUG("target->state: %s",
+ target_state_name(target));
- if (target->state == TARGET_UNKNOWN)
- {
- arm11->simulate_reset_on_next_halt = true;
- }
+ if (target->state == TARGET_UNKNOWN)
+ {
+ arm11->simulate_reset_on_next_halt = true;
+ }
+
+ if (target->state == TARGET_HALTED)
+ {
+ LOG_DEBUG("target was already halted");
+ return ERROR_OK;
+ }
+
+ arm11_add_IR(arm11, ARM11_HALT, TAP_IDLE);
+
+ CHECK_RETVAL(jtag_execute_queue());
- if (target->state == TARGET_HALTED)
- {
- WARNING("target was already halted");
- return ERROR_TARGET_ALREADY_HALTED;
- }
+ uint32_t dscr;
+
+ int i = 0;
+ while (1)
+ {
+ CHECK_RETVAL(arm11_read_DSCR(arm11, &dscr));
+
+ if (dscr & ARM11_DSCR_CORE_HALTED)
+ break;
+
+
+ long long then = 0;
+ if (i == 1000)
+ {
+ then = timeval_ms();
+ }
+ if (i >= 1000)
+ {
+ if ((timeval_ms()-then) > 1000)
+ {
+ LOG_WARNING("Timeout (1000ms) waiting for instructions to complete");
+ return ERROR_FAIL;
+ }
+ }
+ i++;
+ }
+
+ arm11_on_enter_debug_state(arm11);
+
+ enum target_state old_state = target->state;
+
+ target->state = TARGET_HALTED;
+ target->debug_reason = arm11_get_DSCR_debug_reason(dscr);
+
+ CHECK_RETVAL(
+ target_call_event_callbacks(target,
+ old_state == TARGET_DEBUG_RUNNING ? TARGET_EVENT_DEBUG_HALTED : TARGET_EVENT_HALTED));
- if (arm11->trst_active)
- {
- arm11->halt_requested = true;
return ERROR_OK;
- }
+}
- arm11_add_IR(arm11, ARM11_HALT, TAP_RTI);
+static int arm11_resume(struct target_s *target, int current,
+ uint32_t address, int handle_breakpoints, int debug_execution)
+{
+ FNC_INFO;
- jtag_execute_queue();
+ // LOG_DEBUG("current %d address %08x handle_breakpoints %d debug_execution %d",
+ // current, address, handle_breakpoints, debug_execution);
- u32 dscr;
+ struct arm11_common * arm11 = target->arch_info;
- while (1)
- {
- dscr = arm11_read_DSCR(arm11);
+ LOG_DEBUG("target->state: %s",
+ target_state_name(target));
- if (dscr & ARM11_DSCR_CORE_HALTED)
- break;
- }
- arm11_on_enter_debug_state(arm11);
+ if (target->state != TARGET_HALTED)
+ {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (!current)
+ R(PC) = address;
- enum target_state old_state = target->state;
+ LOG_DEBUG("RESUME PC %08" PRIx32 "%s", R(PC), !current ? "!" : "");
- target->state = TARGET_HALTED;
- target->debug_reason = arm11_get_DSCR_debug_reason(dscr);
+ /* clear breakpoints/watchpoints and VCR*/
+ arm11_sc7_clear_vbw(arm11);
- target_call_event_callbacks(target,
- old_state == TARGET_DEBUG_RUNNING ? TARGET_EVENT_DEBUG_HALTED : TARGET_EVENT_HALTED);
+ /* Set up breakpoints */
+ if (!debug_execution)
+ {
+ /* check if one matches PC and step over it if necessary */
- return ERROR_OK;
-}
+ breakpoint_t * bp;
+ for (bp = target->breakpoints; bp; bp = bp->next)
+ {
+ if (bp->address == R(PC))
+ {
+ LOG_DEBUG("must step over %08" PRIx32 "", bp->address);
+ arm11_step(target, 1, 0, 0);
+ break;
+ }
+ }
-int arm11_resume(struct target_s *target, int current, u32 address, int handle_breakpoints, int debug_execution)
-{
- FNC_INFO;
+ /* set all breakpoints */
-// DEBUG("current %d address %08x handle_breakpoints %d debug_execution %d",
-// current, address, handle_breakpoints, debug_execution);
+ size_t brp_num = 0;
- arm11_common_t * arm11 = target->arch_info;
+ for (bp = target->breakpoints; bp; bp = bp->next)
+ {
+ struct arm11_sc7_action brp[2];
- DEBUG("target->state: %s", target_state_strings[target->state]);
+ brp[0].write = 1;
+ brp[0].address = ARM11_SC7_BVR0 + brp_num;
+ brp[0].value = bp->address;
+ brp[1].write = 1;
+ brp[1].address = ARM11_SC7_BCR0 + brp_num;
+ brp[1].value = 0x1 | (3 << 1) | (0x0F << 5) | (0 << 14) | (0 << 16) | (0 << 20) | (0 << 21);
- if (target->state != TARGET_HALTED)
- {
- WARNING("target was not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
+ arm11_sc7_run(arm11, brp, asizeof(brp));
- if (!current)
- R(PC) = address;
+ LOG_DEBUG("Add BP " ZU " at %08" PRIx32 "", brp_num, bp->address);
- INFO("RESUME PC %08x%s", R(PC), !current ? "!" : "");
+ brp_num++;
+ }
- /* clear breakpoints/watchpoints and VCR*/
- arm11_sc7_clear_vbw(arm11);
+ arm11_sc7_set_vcr(arm11, arm11_vcr);
+ }
+
+ arm11_leave_debug_state(arm11);
- /* Set up breakpoints */
- if (!debug_execution)
- {
- /* check if one matches PC and step over it if necessary */
+ arm11_add_IR(arm11, ARM11_RESTART, TAP_IDLE);
- breakpoint_t * bp;
+ CHECK_RETVAL(jtag_execute_queue());
- for (bp = target->breakpoints; bp; bp = bp->next)
+ int i = 0;
+ while (1)
{
- if (bp->address == R(PC))
- {
- DEBUG("must step over %08x", bp->address);
- arm11_step(target, 1, 0, 0);
- break;
- }
+ uint32_t dscr;
+
+ CHECK_RETVAL(arm11_read_DSCR(arm11, &dscr));
+
+ LOG_DEBUG("DSCR %08" PRIx32 "", dscr);
+
+ if (dscr & ARM11_DSCR_CORE_RESTARTED)
+ break;
+
+
+ long long then = 0;
+ if (i == 1000)
+ {
+ then = timeval_ms();
+ }
+ if (i >= 1000)
+ {
+ if ((timeval_ms()-then) > 1000)
+ {
+ LOG_WARNING("Timeout (1000ms) waiting for instructions to complete");
+ return ERROR_FAIL;
+ }
+ }
+ i++;
}
- /* set all breakpoints */
+ if (!debug_execution)
+ {
+ target->state = TARGET_RUNNING;
+ target->debug_reason = DBG_REASON_NOTHALTED;
- size_t brp_num = 0;
-
- for (bp = target->breakpoints; bp; bp = bp->next)
+ CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_RESUMED));
+ }
+ else
{
- arm11_sc7_action_t brp[2];
+ target->state = TARGET_DEBUG_RUNNING;
+ target->debug_reason = DBG_REASON_NOTHALTED;
- brp[0].write = 1;
- brp[0].address = ARM11_SC7_BVR0 + brp_num;
- brp[0].value = bp->address;
- brp[1].write = 1;
- brp[1].address = ARM11_SC7_BCR0 + brp_num;
- brp[1].value = 0x1 | (3 << 1) | (0x0F << 5) | (0 << 14) | (0 << 16) | (0 << 20) | (0 << 21);
-
- arm11_sc7_run(arm11, brp, asizeof(brp));
+ CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_RESUMED));
+ }
+
+ return ERROR_OK;
+}
- DEBUG("Add BP " ZU " at %08x", brp_num, bp->address);
- brp_num++;
+static int armv4_5_to_arm11(int reg)
+{
+ if (reg < 16)
+ return reg;
+ switch (reg)
+ {
+ case ARMV4_5_CPSR:
+ return ARM11_RC_CPSR;
+ case 16:
+ /* FIX!!! handle thumb better! */
+ return ARM11_RC_CPSR;
+ default:
+ LOG_ERROR("BUG: register translation from armv4_5 to arm11 not supported %d", reg);
+ exit(-1);
}
+}
- arm11_sc7_set_vcr(arm11, arm11_vcr);
- }
+static uint32_t arm11_sim_get_reg(struct arm_sim_interface *sim, int reg)
+{
+ struct arm11_common * arm11 = (struct arm11_common *)sim->user_data;
- arm11_leave_debug_state(arm11);
+ reg=armv4_5_to_arm11(reg);
- arm11_add_IR(arm11, ARM11_RESTART, TAP_RTI);
+ return buf_get_u32(arm11->reg_list[reg].value, 0, 32);
+}
+
+static void arm11_sim_set_reg(struct arm_sim_interface *sim,
+ int reg, uint32_t value)
+{
+ struct arm11_common * arm11 = (struct arm11_common *)sim->user_data;
- jtag_execute_queue();
+ reg=armv4_5_to_arm11(reg);
- while (1)
- {
- u32 dscr = arm11_read_DSCR(arm11);
+ buf_set_u32(arm11->reg_list[reg].value, 0, 32, value);
+}
- DEBUG("DSCR %08x", dscr);
+static uint32_t arm11_sim_get_cpsr(struct arm_sim_interface *sim,
+ int pos, int bits)
+{
+ struct arm11_common * arm11 = (struct arm11_common *)sim->user_data;
- if (dscr & ARM11_DSCR_CORE_RESTARTED)
- break;
- }
+ return buf_get_u32(arm11->reg_list[ARM11_RC_CPSR].value, pos, bits);
+}
- if (!debug_execution)
- {
- target->state = TARGET_RUNNING;
- target->debug_reason = DBG_REASON_NOTHALTED;
- target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
- }
- else
- {
- target->state = TARGET_DEBUG_RUNNING;
- target->debug_reason = DBG_REASON_NOTHALTED;
- target_call_event_callbacks(target, TARGET_EVENT_DEBUG_RESUMED);
- }
+static enum armv4_5_state arm11_sim_get_state(struct arm_sim_interface *sim)
+{
+// struct arm11_common * arm11 = (struct arm11_common *)sim->user_data;
- return ERROR_OK;
+ /* FIX!!!! we should implement thumb for arm11 */
+ return ARMV4_5_STATE_ARM;
}
-int arm11_step(struct target_s *target, int current, u32 address, int handle_breakpoints)
+static void arm11_sim_set_state(struct arm_sim_interface *sim,
+ enum armv4_5_state mode)
{
- FNC_INFO;
+// struct arm11_common * arm11 = (struct arm11_common *)sim->user_data;
- DEBUG("target->state: %s", target_state_strings[target->state]);
+ /* FIX!!!! we should implement thumb for arm11 */
+ LOG_ERROR("Not implemetned!");
+}
- if (target->state != TARGET_HALTED)
- {
- WARNING("target was not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
- arm11_common_t * arm11 = target->arch_info;
+static enum armv4_5_mode arm11_sim_get_mode(struct arm_sim_interface *sim)
+{
+ //struct arm11_common * arm11 = (struct arm11_common *)sim->user_data;
- if (!current)
- R(PC) = address;
+ /* FIX!!!! we should implement something that returns the current mode here!!! */
+ return ARMV4_5_MODE_USR;
+}
- INFO("STEP PC %08x%s", R(PC), !current ? "!" : "");
+static int arm11_simulate_step(target_t *target, uint32_t *dry_run_pc)
+{
+ struct arm_sim_interface sim;
- /** \todo TODO: Thumb not supported here */
+ sim.user_data=target->arch_info;
+ sim.get_reg=&arm11_sim_get_reg;
+ sim.set_reg=&arm11_sim_set_reg;
+ sim.get_reg_mode=&arm11_sim_get_reg;
+ sim.set_reg_mode=&arm11_sim_set_reg;
+ sim.get_cpsr=&arm11_sim_get_cpsr;
+ sim.get_mode=&arm11_sim_get_mode;
+ sim.get_state=&arm11_sim_get_state;
+ sim.set_state=&arm11_sim_set_state;
- u32 next_instruction;
+ return arm_simulate_step_core(target, dry_run_pc, &sim);
- arm11_read_memory_word(arm11, R(PC), &next_instruction);
+}
- /* skip over BKPT */
- if ((next_instruction & 0xFFF00070) == 0xe1200070)
- {
- R(PC) += 4;
- arm11->reg_list[ARM11_RC_PC].valid = 1;
- arm11->reg_list[ARM11_RC_PC].dirty = 0;
- INFO("Skipping BKPT");
- }
- /* skip over Wait for interrupt / Standby */
- /* mcr 15, 0, r?, cr7, cr0, {4} */
- else if ((next_instruction & 0xFFFF0FFF) == 0xee070f90)
- {
- R(PC) += 4;
- arm11->reg_list[ARM11_RC_PC].valid = 1;
- arm11->reg_list[ARM11_RC_PC].dirty = 0;
- INFO("Skipping WFI");
- }
- /* ignore B to self */
- else if ((next_instruction & 0xFEFFFFFF) == 0xeafffffe)
- {
- INFO("Not stepping jump to self");
- }
- else
- {
- /** \todo TODO: check if break-/watchpoints make any sense at all in combination
- * with this. */
+static int arm11_step(struct target_s *target, int current,
+ uint32_t address, int handle_breakpoints)
+{
+ FNC_INFO;
- /** \todo TODO: check if disabling IRQs might be a good idea here. Alternatively
- * the VCR might be something worth looking into. */
+ LOG_DEBUG("target->state: %s",
+ target_state_name(target));
+ if (target->state != TARGET_HALTED)
+ {
+ LOG_WARNING("target was not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
- /* Set up breakpoint for stepping */
+ struct arm11_common * arm11 = target->arch_info;
- arm11_sc7_action_t brp[2];
+ if (!current)
+ R(PC) = address;
- brp[0].write = 1;
- brp[0].address = ARM11_SC7_BVR0;
- brp[0].value = R(PC);
- brp[1].write = 1;
- brp[1].address = ARM11_SC7_BCR0;
- brp[1].value = 0x1 | (3 << 1) | (0x0F << 5) | (0 << 14) | (0 << 16) | (0 << 20) | (2 << 21);
+ LOG_DEBUG("STEP PC %08" PRIx32 "%s", R(PC), !current ? "!" : "");
- arm11_sc7_run(arm11, brp, asizeof(brp));
- /* resume */
+ /** \todo TODO: Thumb not supported here */
- arm11_leave_debug_state(arm11);
+ uint32_t next_instruction;
+
+ CHECK_RETVAL(arm11_read_memory_word(arm11, R(PC), &next_instruction));
+
+ /* skip over BKPT */
+ if ((next_instruction & 0xFFF00070) == 0xe1200070)
+ {
+ R(PC) += 4;
+ arm11->reg_list[ARM11_RC_PC].valid = 1;
+ arm11->reg_list[ARM11_RC_PC].dirty = 0;
+ LOG_DEBUG("Skipping BKPT");
+ }
+ /* skip over Wait for interrupt / Standby */
+ /* mcr 15, 0, r?, cr7, cr0, {4} */
+ else if ((next_instruction & 0xFFFF0FFF) == 0xee070f90)
+ {
+ R(PC) += 4;
+ arm11->reg_list[ARM11_RC_PC].valid = 1;
+ arm11->reg_list[ARM11_RC_PC].dirty = 0;
+ LOG_DEBUG("Skipping WFI");
+ }
+ /* ignore B to self */
+ else if ((next_instruction & 0xFEFFFFFF) == 0xeafffffe)
+ {
+ LOG_DEBUG("Not stepping jump to self");
+ }
+ else
+ {
+ /** \todo TODO: check if break-/watchpoints make any sense at all in combination
+ * with this. */
- arm11_add_IR(arm11, ARM11_RESTART, TAP_RTI);
+ /** \todo TODO: check if disabling IRQs might be a good idea here. Alternatively
+ * the VCR might be something worth looking into. */
- jtag_execute_queue();
- /** \todo TODO: add a timeout */
+ /* Set up breakpoint for stepping */
- /* wait for halt */
+ struct arm11_sc7_action brp[2];
- while (1)
- {
- u32 dscr = arm11_read_DSCR(arm11);
+ brp[0].write = 1;
+ brp[0].address = ARM11_SC7_BVR0;
+ brp[1].write = 1;
+ brp[1].address = ARM11_SC7_BCR0;
- DEBUG("DSCR %08x", dscr);
+ if (arm11_config_hardware_step)
+ {
+ /* hardware single stepping be used if possible or is it better to
+ * always use the same code path? Hardware single stepping is not supported
+ * on all hardware
+ */
+ brp[0].value = R(PC);
+ brp[1].value = 0x1 | (3 << 1) | (0x0F << 5) | (0 << 14) | (0 << 16) | (0 << 20) | (2 << 21);
+ } else
+ {
+ /* sets a breakpoint on the next PC(calculated by simulation),
+ */
+ uint32_t next_pc;
+ int retval;
+ retval = arm11_simulate_step(target, &next_pc);
+ if (retval != ERROR_OK)
+ return retval;
- if ((dscr & (ARM11_DSCR_CORE_RESTARTED | ARM11_DSCR_CORE_HALTED)) ==
- (ARM11_DSCR_CORE_RESTARTED | ARM11_DSCR_CORE_HALTED))
- break;
- }
+ brp[0].value = next_pc;
+ brp[1].value = 0x1 | (3 << 1) | (0x0F << 5) | (0 << 14) | (0 << 16) | (0 << 20) | (0 << 21);
+ }
- /* clear breakpoint */
- arm11_sc7_clear_vbw(arm11);
+ CHECK_RETVAL(arm11_sc7_run(arm11, brp, asizeof(brp)));
- /* save state */
- arm11_on_enter_debug_state(arm11);
- }
+ /* resume */
-// target->state = TARGET_HALTED;
- target->debug_reason = DBG_REASON_SINGLESTEP;
- target_call_event_callbacks(target, TARGET_EVENT_HALTED);
+ if (arm11_config_step_irq_enable)
+ R(DSCR) &= ~ARM11_DSCR_INTERRUPTS_DISABLE; /* should be redundant */
+ else
+ R(DSCR) |= ARM11_DSCR_INTERRUPTS_DISABLE;
- return ERROR_OK;
-}
+ CHECK_RETVAL(arm11_leave_debug_state(arm11));
-/* target reset control */
-int arm11_assert_reset(struct target_s *target)
-{
- FNC_INFO;
+ arm11_add_IR(arm11, ARM11_RESTART, TAP_IDLE);
-#if 0
- /* assert reset lines */
- /* resets only the DBGTAP, not the ARM */
+ CHECK_RETVAL(jtag_execute_queue());
- jtag_add_reset(1, 0);
- jtag_add_sleep(5000);
+ /* wait for halt */
+ int i = 0;
+ while (1)
+ {
+ uint32_t dscr;
- arm11_common_t * arm11 = target->arch_info;
- arm11->trst_active = true;
-#endif
+ CHECK_RETVAL(arm11_read_DSCR(arm11, &dscr));
- return ERROR_OK;
+ LOG_DEBUG("DSCR %08" PRIx32 "e", dscr);
+
+ if ((dscr & (ARM11_DSCR_CORE_RESTARTED | ARM11_DSCR_CORE_HALTED)) ==
+ (ARM11_DSCR_CORE_RESTARTED | ARM11_DSCR_CORE_HALTED))
+ break;
+
+ long long then = 0;
+ if (i == 1000)
+ {
+ then = timeval_ms();
+ }
+ if (i >= 1000)
+ {
+ if ((timeval_ms()-then) > 1000)
+ {
+ LOG_WARNING("Timeout (1000ms) waiting for instructions to complete");
+ return ERROR_FAIL;
+ }
+ }
+ i++;
+ }
+
+ /* clear breakpoint */
+ arm11_sc7_clear_vbw(arm11);
+
+ /* save state */
+ CHECK_RETVAL(arm11_on_enter_debug_state(arm11));
+
+ /* restore default state */
+ R(DSCR) &= ~ARM11_DSCR_INTERRUPTS_DISABLE;
+
+ }
+
+ // target->state = TARGET_HALTED;
+ target->debug_reason = DBG_REASON_SINGLESTEP;
+
+ CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_HALTED));
+
+ return ERROR_OK;
}
-int arm11_deassert_reset(struct target_s *target)
+static int arm11_assert_reset(target_t *target)
{
- FNC_INFO;
+ FNC_INFO;
+ int retval;
-#if 0
- DEBUG("target->state: %s", target_state_strings[target->state]);
+ struct arm11_common * arm11 = target->arch_info;
+ retval = arm11_check_init(arm11, NULL);
+ if (retval != ERROR_OK)
+ return retval;
- /* deassert reset lines */
- jtag_add_reset(0, 0);
+ target->state = TARGET_UNKNOWN;
- arm11_common_t * arm11 = target->arch_info;
- arm11->trst_active = false;
+ /* we would very much like to reset into the halted, state,
+ * but resetting and halting is second best... */
+ if (target->reset_halt)
+ {
+ CHECK_RETVAL(target_halt(target));
+ }
- if (arm11->halt_requested)
- return arm11_halt(target);
-#endif
- return ERROR_OK;
+ /* srst is funny. We can not do *anything* else while it's asserted
+ * and it has unkonwn side effects. Make sure no other code runs
+ * meanwhile.
+ *
+ * Code below assumes srst:
+ *
+ * - Causes power-on-reset (but of what parts of the system?). Bug
+ * in arm11?
+ *
+ * - Messes us TAP state without asserting trst.
+ *
+ * - There is another bug in the arm11 core. When you generate an access to
+ * external logic (for example ddr controller via AHB bus) and that block
+ * is not configured (perhaps it is still held in reset), that transaction
+ * will never complete. This will hang arm11 core but it will also hang
+ * JTAG controller. Nothing, short of srst assertion will bring it out of
+ * this.
+ *
+ * Mysteries:
+ *
+ * - What should the PC be after an srst reset when starting in the halted
+ * state?
+ */
+
+ jtag_add_reset(0, 1);
+ jtag_add_reset(0, 0);
+
+ /* How long do we have to wait? */
+ jtag_add_sleep(5000);
+
+ /* un-mess up TAP state */
+ jtag_add_tlr();
+
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
+ {
+ return retval;
+ }
+
+ return ERROR_OK;
}
-int arm11_soft_reset_halt(struct target_s *target)
+static int arm11_deassert_reset(target_t *target)
{
- FNC_INFO_NOTIMPLEMENTED;
-
- return ERROR_OK;
+ return ERROR_OK;
}
-int arm11_prepare_reset_halt(struct target_s *target)
+static int arm11_soft_reset_halt(struct target_s *target)
{
- FNC_INFO_NOTIMPLEMENTED;
+ FNC_INFO_NOTIMPLEMENTED;
- return ERROR_OK;
+ return ERROR_OK;
}
-
/* target register access for gdb */
-int arm11_get_gdb_reg_list(struct target_s *target, struct reg_s **reg_list[], int *reg_list_size)
+static int arm11_get_gdb_reg_list(struct target_s *target,
+ struct reg_s **reg_list[], int *reg_list_size)
{
- FNC_INFO;
+ FNC_INFO;
- arm11_common_t * arm11 = target->arch_info;
-
- if (target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- *reg_list_size = ARM11_GDB_REGISTER_COUNT;
- *reg_list = malloc(sizeof(reg_t*) * ARM11_GDB_REGISTER_COUNT);
+ struct arm11_common * arm11 = target->arch_info;
- {size_t i;
- for (i = 16; i < 24; i++)
- {
- (*reg_list)[i] = &arm11_gdb_dummy_fp_reg;
- }}
+ *reg_list_size = ARM11_GDB_REGISTER_COUNT;
+ *reg_list = malloc(sizeof(reg_t*) * ARM11_GDB_REGISTER_COUNT);
- (*reg_list)[24] = &arm11_gdb_dummy_fps_reg;
+ for (size_t i = 16; i < 24; i++)
+ {
+ (*reg_list)[i] = &arm11_gdb_dummy_fp_reg;
+ }
+ (*reg_list)[24] = &arm11_gdb_dummy_fps_reg;
- {size_t i;
- for (i = 0; i < ARM11_REGCACHE_COUNT; i++)
- {
- if (arm11_reg_defs[i].gdb_num == -1)
- continue;
+ for (size_t i = 0; i < ARM11_REGCACHE_COUNT; i++)
+ {
+ if (arm11_reg_defs[i].gdb_num == -1)
+ continue;
- (*reg_list)[arm11_reg_defs[i].gdb_num] = arm11->reg_list + i;
- }}
+ (*reg_list)[arm11_reg_defs[i].gdb_num] = arm11->reg_list + i;
+ }
- return ERROR_OK;
+ return ERROR_OK;
}
-
-/* target memory access
-* size: 1 = byte (8bit), 2 = half-word (16bit), 4 = word (32bit)
-* count: number of items of <size>
-*/
-int arm11_read_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer)
+/* target memory access
+ * size: 1 = byte (8bit), 2 = half-word (16bit), 4 = word (32bit)
+ * count: number of items of <size>
+ *
+ * arm11_config_memrw_no_increment - in the future we may want to be able
+ * to read/write a range of data to a "port". a "port" is an action on
+ * read memory address for some peripheral.
+ */
+static int arm11_read_memory_inner(struct target_s *target,
+ uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer,
+ bool arm11_config_memrw_no_increment)
{
- /** \todo TODO: check if buffer cast to u32* and u16* might cause alignment problems */
+ /** \todo TODO: check if buffer cast to uint32_t* and uint16_t* might cause alignment problems */
+ int retval;
- FNC_INFO;
+ FNC_INFO;
- DEBUG("ADDR %08x SIZE %08x COUNT %08x", address, size, count);
+ if (target->state != TARGET_HALTED)
+ {
+ LOG_WARNING("target was not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
- arm11_common_t * arm11 = target->arch_info;
+ LOG_DEBUG("ADDR %08" PRIx32 " SIZE %08" PRIx32 " COUNT %08" PRIx32 "", address, size, count);
- arm11_run_instr_data_prepare(arm11);
+ struct arm11_common * arm11 = target->arch_info;
- /* MRC p14,0,r0,c0,c5,0 */
- arm11_run_instr_data_to_core1(arm11, 0xee100e15, address);
+ retval = arm11_run_instr_data_prepare(arm11);
+ if (retval != ERROR_OK)
+ return retval;
- switch (size)
- {
- case 1:
- /** \todo TODO: check if dirty is the right choice to force a rewrite on arm11_resume() */
- arm11->reg_list[ARM11_RC_R1].dirty = 1;
+ /* MRC p14,0,r0,c0,c5,0 */
+ retval = arm11_run_instr_data_to_core1(arm11, 0xee100e15, address);
+ if (retval != ERROR_OK)
+ return retval;
- {size_t i;
- for (i = 0; i < count; i++)
+ switch (size)
{
- /* ldrb r1, [r0], #1 */
- arm11_run_instr_no_data1(arm11, 0xe4d01001);
-
- u32 res;
- /* MCR p14,0,R1,c0,c5,0 */
- arm11_run_instr_data_from_core(arm11, 0xEE001E15, &res, 1);
+ case 1:
+ /** \todo TODO: check if dirty is the right choice to force a rewrite on arm11_resume() */
+ arm11->reg_list[ARM11_RC_R1].dirty = 1;
- *buffer++ = res;
- }}
+ for (size_t i = 0; i < count; i++)
+ {
+ /* ldrb r1, [r0], #1 */
+ /* ldrb r1, [r0] */
+ arm11_run_instr_no_data1(arm11,
+ !arm11_config_memrw_no_increment ? 0xe4d01001 : 0xe5d01000);
- break;
+ uint32_t res;
+ /* MCR p14,0,R1,c0,c5,0 */
+ arm11_run_instr_data_from_core(arm11, 0xEE001E15, &res, 1);
- case 2:
- {
- arm11->reg_list[ARM11_RC_R1].dirty = 1;
+ *buffer++ = res;
+ }
- u16 * buf16 = (u16*)buffer;
+ break;
- {size_t i;
- for (i = 0; i < count; i++)
- {
- /* ldrh r1, [r0], #2 */
- arm11_run_instr_no_data1(arm11, 0xe0d010b2);
+ case 2:
+ {
+ arm11->reg_list[ARM11_RC_R1].dirty = 1;
- u32 res;
+ for (size_t i = 0; i < count; i++)
+ {
+ /* ldrh r1, [r0], #2 */
+ arm11_run_instr_no_data1(arm11,
+ !arm11_config_memrw_no_increment ? 0xe0d010b2 : 0xe1d010b0);
- /* MCR p14,0,R1,c0,c5,0 */
- arm11_run_instr_data_from_core(arm11, 0xEE001E15, &res, 1);
+ uint32_t res;
- *buf16++ = res;
- }}
+ /* MCR p14,0,R1,c0,c5,0 */
+ arm11_run_instr_data_from_core(arm11, 0xEE001E15, &res, 1);
- break;
- }
+ uint16_t svalue = res;
+ memcpy(buffer + i * sizeof(uint16_t), &svalue, sizeof(uint16_t));
+ }
- case 4:
+ break;
+ }
- /* LDC p14,c5,[R0],#4 */
- arm11_run_instr_data_from_core(arm11, 0xecb05e01, (u32 *)buffer, count);
- break;
- }
+ case 4:
+ {
+ uint32_t instr = !arm11_config_memrw_no_increment ? 0xecb05e01 : 0xed905e00;
+ /** \todo TODO: buffer cast to uint32_t* causes alignment warnings */
+ uint32_t *words = (uint32_t *)buffer;
- arm11_run_instr_data_finish(arm11);
+ /* LDC p14,c5,[R0],#4 */
+ /* LDC p14,c5,[R0] */
+ arm11_run_instr_data_from_core(arm11, instr, words, count);
+ break;
+ }
+ }
- return ERROR_OK;
+ return arm11_run_instr_data_finish(arm11);
}
-int arm11_write_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer)
+static int arm11_read_memory(struct target_s *target, uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
{
- FNC_INFO;
-
- DEBUG("ADDR %08x SIZE %08x COUNT %08x", address, size, count);
+ return arm11_read_memory_inner(target, address, size, count, buffer, false);
+}
- arm11_common_t * arm11 = target->arch_info;
+/*
+* arm11_config_memrw_no_increment - in the future we may want to be able
+* to read/write a range of data to a "port". a "port" is an action on
+* read memory address for some peripheral.
+*/
+static int arm11_write_memory_inner(struct target_s *target,
+ uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer,
+ bool arm11_config_memrw_no_increment)
+{
+ int retval;
+ FNC_INFO;
- arm11_run_instr_data_prepare(arm11);
+ if (target->state != TARGET_HALTED)
+ {
+ LOG_WARNING("target was not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
- /* MRC p14,0,r0,c0,c5,0 */
- arm11_run_instr_data_to_core1(arm11, 0xee100e15, address);
+ LOG_DEBUG("ADDR %08" PRIx32 " SIZE %08" PRIx32 " COUNT %08" PRIx32 "", address, size, count);
- switch (size)
- {
- case 1:
- {
- arm11->reg_list[ARM11_RC_R1].dirty = 1;
+ struct arm11_common * arm11 = target->arch_info;
- {size_t i;
- for (i = 0; i < count; i++)
- {
- /* MRC p14,0,r1,c0,c5,0 */
- arm11_run_instr_data_to_core1(arm11, 0xee101e15, *buffer++);
+ retval = arm11_run_instr_data_prepare(arm11);
+ if (retval != ERROR_OK)
+ return retval;
- /* strb r1, [r0], #1 */
- arm11_run_instr_no_data1(arm11, 0xe4c01001);
- }}
+ /* MRC p14,0,r0,c0,c5,0 */
+ retval = arm11_run_instr_data_to_core1(arm11, 0xee100e15, address);
+ if (retval != ERROR_OK)
+ return retval;
- break;
- }
+ /* burst writes are not used for single words as those may well be
+ * reset init script writes.
+ *
+ * The other advantage is that as burst writes are default, we'll
+ * now exercise both burst and non-burst code paths with the
+ * default settings, increasing code coverage.
+ */
+ bool burst = arm11_config_memwrite_burst && (count > 1);
- case 2:
- {
- arm11->reg_list[ARM11_RC_R1].dirty = 1;
+ switch (size)
+ {
+ case 1:
+ {
+ arm11->reg_list[ARM11_RC_R1].dirty = 1;
+
+ for (size_t i = 0; i < count; i++)
+ {
+ /* MRC p14,0,r1,c0,c5,0 */
+ retval = arm11_run_instr_data_to_core1(arm11, 0xee101e15, *buffer++);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* strb r1, [r0], #1 */
+ /* strb r1, [r0] */
+ retval = arm11_run_instr_no_data1(arm11,
+ !arm11_config_memrw_no_increment ? 0xe4c01001 : 0xe5c01000);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ break;
+ }
+
+ case 2:
+ {
+ arm11->reg_list[ARM11_RC_R1].dirty = 1;
+
+ for (size_t i = 0; i < count; i++)
+ {
+ uint16_t value;
+ memcpy(&value, buffer + i * sizeof(uint16_t), sizeof(uint16_t));
+
+ /* MRC p14,0,r1,c0,c5,0 */
+ retval = arm11_run_instr_data_to_core1(arm11, 0xee101e15, value);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* strh r1, [r0], #2 */
+ /* strh r1, [r0] */
+ retval = arm11_run_instr_no_data1(arm11,
+ !arm11_config_memrw_no_increment ? 0xe0c010b2 : 0xe1c010b0);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ break;
+ }
+
+ case 4: {
+ uint32_t instr = !arm11_config_memrw_no_increment ? 0xeca05e01 : 0xed805e00;
+
+ /** \todo TODO: buffer cast to uint32_t* causes alignment warnings */
+ uint32_t *words = (uint32_t*)buffer;
+
+ if (!burst)
+ {
+ /* STC p14,c5,[R0],#4 */
+ /* STC p14,c5,[R0]*/
+ retval = arm11_run_instr_data_to_core(arm11, instr, words, count);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+ else
+ {
+ /* STC p14,c5,[R0],#4 */
+ /* STC p14,c5,[R0]*/
+ retval = arm11_run_instr_data_to_core_noack(arm11, instr, words, count);
+ if (retval != ERROR_OK)
+ return retval;
+ }
- u16 * buf16 = (u16*)buffer;
+ break;
+ }
+ }
- {size_t i;
- for (i = 0; i < count; i++)
+ /* r0 verification */
+ if (!arm11_config_memrw_no_increment)
{
- /* MRC p14,0,r1,c0,c5,0 */
- arm11_run_instr_data_to_core1(arm11, 0xee101e15, *buf16++);
+ uint32_t r0;
+
+ /* MCR p14,0,R0,c0,c5,0 */
+ retval = arm11_run_instr_data_from_core(arm11, 0xEE000E15, &r0, 1);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (address + size * count != r0)
+ {
+ LOG_ERROR("Data transfer failed. Expected end "
+ "address 0x%08x, got 0x%08x",
+ (unsigned) (address + size * count),
+ (unsigned) r0);
+
+ if (burst)
+ LOG_ERROR("use 'arm11 memwrite burst disable' to disable fast burst mode");
+
+ if (arm11_config_memwrite_error_fatal)
+ return ERROR_FAIL;
+ }
+ }
- /* strh r1, [r0], #2 */
- arm11_run_instr_no_data1(arm11, 0xe0c010b2);
- }}
+ return arm11_run_instr_data_finish(arm11);
+}
- break;
- }
+static int arm11_write_memory(struct target_s *target,
+ uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
+{
+ return arm11_write_memory_inner(target, address, size, count, buffer, false);
+}
- case 4:
- /** \todo TODO: check if buffer cast to u32* might cause alignment problems */
+/* write target memory in multiples of 4 byte, optimized for writing large quantities of data */
+static int arm11_bulk_write_memory(struct target_s *target,
+ uint32_t address, uint32_t count, uint8_t *buffer)
+{
+ FNC_INFO;
- if (!arm11_config_memwrite_burst)
- {
- /* STC p14,c5,[R0],#4 */
- arm11_run_instr_data_to_core(arm11, 0xeca05e01, (u32 *)buffer, count);
- }
- else
+ if (target->state != TARGET_HALTED)
{
- /* STC p14,c5,[R0],#4 */
- arm11_run_instr_data_to_core_noack(arm11, 0xeca05e01, (u32 *)buffer, count);
+ LOG_WARNING("target was not halted");
+ return ERROR_TARGET_NOT_HALTED;
}
- break;
- }
+ return arm11_write_memory(target, address, 4, count, buffer);
+}
-#if 1
- /* r0 verification */
- {
- u32 r0;
+/* here we have nothing target specific to contribute, so we fail and then the
+ * fallback code will read data from the target and calculate the CRC on the
+ * host.
+ */
+static int arm11_checksum_memory(struct target_s *target,
+ uint32_t address, uint32_t count, uint32_t* checksum)
+{
+ return ERROR_FAIL;
+}
- /* MCR p14,0,R0,c0,c5,0 */
- arm11_run_instr_data_from_core(arm11, 0xEE000E15, &r0, 1);
+/* target break-/watchpoint control
+* rw: 0 = write, 1 = read, 2 = access
+*/
+static int arm11_add_breakpoint(struct target_s *target,
+ breakpoint_t *breakpoint)
+{
+ FNC_INFO;
+
+ struct arm11_common * arm11 = target->arch_info;
- if (address + size * count != r0)
+#if 0
+ if (breakpoint->type == BKPT_SOFT)
{
- ERROR("Data transfer failed. (%d)", (r0 - address) - size * count);
+ LOG_INFO("sw breakpoint requested, but software breakpoints not enabled");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+#endif
- if (arm11_config_memwrite_burst)
- ERROR("use 'arm11 memwrite burst disable' to disable fast burst mode");
+ if (!arm11->free_brps)
+ {
+ LOG_DEBUG("no breakpoint unit available for hardware breakpoint");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
- if (arm11_config_memwrite_error_fatal)
- exit(-1);
+ if (breakpoint->length != 4)
+ {
+ LOG_DEBUG("only breakpoints of four bytes length supported");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- }
-#endif
+ arm11->free_brps--;
- arm11_run_instr_data_finish(arm11);
+ return ERROR_OK;
+}
+static int arm11_remove_breakpoint(struct target_s *target,
+ breakpoint_t *breakpoint)
+{
+ FNC_INFO;
+ struct arm11_common * arm11 = target->arch_info;
+ arm11->free_brps++;
- return ERROR_OK;
+ return ERROR_OK;
}
-
-/* write target memory in multiples of 4 byte, optimized for writing large quantities of data */
-int arm11_bulk_write_memory(struct target_s *target, u32 address, u32 count, u8 *buffer)
+static int arm11_add_watchpoint(struct target_s *target,
+ watchpoint_t *watchpoint)
{
- FNC_INFO;
+ FNC_INFO_NOTIMPLEMENTED;
- return arm11_write_memory(target, address, 4, count, buffer);
+ return ERROR_OK;
}
-
-int arm11_checksum_memory(struct target_s *target, u32 address, u32 count, u32* checksum)
+static int arm11_remove_watchpoint(struct target_s *target,
+ watchpoint_t *watchpoint)
{
- FNC_INFO_NOTIMPLEMENTED;
+ FNC_INFO_NOTIMPLEMENTED;
- return ERROR_OK;
+ return ERROR_OK;
}
+// HACKHACKHACK - FIXME mode/state
+/* target algorithm support */
+static int arm11_run_algorithm(struct target_s *target,
+ int num_mem_params, struct mem_param *mem_params,
+ int num_reg_params, struct reg_param *reg_params,
+ uint32_t entry_point, uint32_t exit_point,
+ int timeout_ms, void *arch_info)
+{
+ struct arm11_common *arm11 = target->arch_info;
+// enum armv4_5_state core_state = arm11->core_state;
+// enum armv4_5_mode core_mode = arm11->core_mode;
+ uint32_t context[16];
+ uint32_t cpsr;
+ int exit_breakpoint_size = 0;
+ int retval = ERROR_OK;
+ LOG_DEBUG("Running algorithm");
-/* target break-/watchpoint control
-* rw: 0 = write, 1 = read, 2 = access
+
+ if (target->state != TARGET_HALTED)
+ {
+ LOG_WARNING("target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ // FIXME
+// if (armv4_5_mode_to_number(arm11->core_mode)==-1)
+// return ERROR_FAIL;
+
+ // Save regs
+ for (unsigned i = 0; i < 16; i++)
+ {
+ context[i] = buf_get_u32((uint8_t*)(&arm11->reg_values[i]),0,32);
+ LOG_DEBUG("Save %u: 0x%" PRIx32 "", i, context[i]);
+ }
+
+ cpsr = buf_get_u32((uint8_t*)(arm11->reg_values + ARM11_RC_CPSR),0,32);
+ LOG_DEBUG("Save CPSR: 0x%" PRIx32 "", cpsr);
+
+ for (int i = 0; i < num_mem_params; i++)
+ {
+ target_write_buffer(target, mem_params[i].address, mem_params[i].size, mem_params[i].value);
+ }
+
+ // Set register parameters
+ for (int i = 0; i < num_reg_params; i++)
+ {
+ reg_t *reg = register_get_by_name(arm11->core_cache, reg_params[i].reg_name, 0);
+ if (!reg)
+ {
+ LOG_ERROR("BUG: register '%s' not found", reg_params[i].reg_name);
+ exit(-1);
+ }
+
+ if (reg->size != reg_params[i].size)
+ {
+ LOG_ERROR("BUG: register '%s' size doesn't match reg_params[i].size", reg_params[i].reg_name);
+ exit(-1);
+ }
+ arm11_set_reg(reg,reg_params[i].value);
+// printf("%i: Set %s =%08x\n", i, reg_params[i].reg_name,val);
+ }
+
+ exit_breakpoint_size = 4;
+
+/* arm11->core_state = arm11_algorithm_info->core_state;
+ if (arm11->core_state == ARMV4_5_STATE_ARM)
+ exit_breakpoint_size = 4;
+ else if (arm11->core_state == ARMV4_5_STATE_THUMB)
+ exit_breakpoint_size = 2;
+ else
+ {
+ LOG_ERROR("BUG: can't execute algorithms when not in ARM or Thumb state");
+ exit(-1);
+ }
*/
-int arm11_add_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
-{
- FNC_INFO;
- arm11_common_t * arm11 = target->arch_info;
+/* arm11 at this point only supports ARM not THUMB mode
+ however if this test needs to be reactivated the current state can be read back
+ from CPSR */
#if 0
- if (breakpoint->type == BKPT_SOFT)
- {
- INFO("sw breakpoint requested, but software breakpoints not enabled");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
+ if (arm11_algorithm_info->core_mode != ARMV4_5_MODE_ANY)
+ {
+ LOG_DEBUG("setting core_mode: 0x%2.2x", arm11_algorithm_info->core_mode);
+ buf_set_u32(arm11->reg_list[ARM11_RC_CPSR].value, 0, 5, arm11_algorithm_info->core_mode);
+ arm11->reg_list[ARM11_RC_CPSR].dirty = 1;
+ arm11->reg_list[ARM11_RC_CPSR].valid = 1;
+ }
#endif
- if (!arm11->free_brps)
- {
- INFO("no breakpoint unit available for hardware breakpoint");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
+ if ((retval = breakpoint_add(target, exit_point, exit_breakpoint_size, BKPT_HARD)) != ERROR_OK)
+ {
+ LOG_ERROR("can't add breakpoint to finish algorithm execution");
+ retval = ERROR_TARGET_FAILURE;
+ goto restore;
+ }
+
+ // no debug, otherwise breakpoint is not set
+ CHECK_RETVAL(target_resume(target, 0, entry_point, 1, 0));
- if (breakpoint->length != 4)
- {
- INFO("only breakpoints of four bytes length supported");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
+ CHECK_RETVAL(target_wait_state(target, TARGET_HALTED, timeout_ms));
- arm11->free_brps--;
+ if (target->state != TARGET_HALTED)
+ {
+ CHECK_RETVAL(target_halt(target));
- return ERROR_OK;
+ CHECK_RETVAL(target_wait_state(target, TARGET_HALTED, 500));
+
+ retval = ERROR_TARGET_TIMEOUT;
+
+ goto del_breakpoint;
+ }
+
+ if (buf_get_u32(arm11->reg_list[15].value, 0, 32) != exit_point)
+ {
+ LOG_WARNING("target reentered debug state, but not at the desired exit point: 0x%4.4" PRIx32 "",
+ buf_get_u32(arm11->reg_list[15].value, 0, 32));
+ retval = ERROR_TARGET_TIMEOUT;
+ goto del_breakpoint;
+ }
+
+ for (int i = 0; i < num_mem_params; i++)
+ {
+ if (mem_params[i].direction != PARAM_OUT)
+ target_read_buffer(target, mem_params[i].address, mem_params[i].size, mem_params[i].value);
+ }
+
+ for (int i = 0; i < num_reg_params; i++)
+ {
+ if (reg_params[i].direction != PARAM_OUT)
+ {
+ reg_t *reg = register_get_by_name(arm11->core_cache, reg_params[i].reg_name, 0);
+ if (!reg)
+ {
+ LOG_ERROR("BUG: register '%s' not found", reg_params[i].reg_name);
+ exit(-1);
+ }
+
+ if (reg->size != reg_params[i].size)
+ {
+ LOG_ERROR("BUG: register '%s' size doesn't match reg_params[i].size", reg_params[i].reg_name);
+ exit(-1);
+ }
+
+ buf_set_u32(reg_params[i].value, 0, 32, buf_get_u32(reg->value, 0, 32));
+ }
+ }
+
+del_breakpoint:
+ breakpoint_remove(target, exit_point);
+
+restore:
+ // Restore context
+ for (size_t i = 0; i < 16; i++)
+ {
+ LOG_DEBUG("restoring register %s with value 0x%8.8" PRIx32 "",
+ arm11->reg_list[i].name, context[i]);
+ arm11_set_reg(&arm11->reg_list[i], (uint8_t*)&context[i]);
+ }
+ LOG_DEBUG("restoring CPSR with value 0x%8.8" PRIx32 "", cpsr);
+ arm11_set_reg(&arm11->reg_list[ARM11_RC_CPSR], (uint8_t*)&cpsr);
+
+// arm11->core_state = core_state;
+// arm11->core_mode = core_mode;
+
+ return retval;
}
-int arm11_remove_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
+static int arm11_target_create(struct target_s *target, Jim_Interp *interp)
{
- FNC_INFO;
+ FNC_INFO;
- arm11_common_t * arm11 = target->arch_info;
-
- arm11->free_brps++;
+ NEW(struct arm11_common, arm11, 1);
+
+ arm11->target = target;
+
+ if (target->tap == NULL)
+ return ERROR_FAIL;
+
+ if (target->tap->ir_length != 5)
+ {
+ LOG_ERROR("'target arm11' expects IR LENGTH = 5");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
- return ERROR_OK;
+ target->arch_info = arm11;
+
+ return ERROR_OK;
}
-int arm11_add_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
+static int arm11_init_target(struct command_context_s *cmd_ctx,
+ struct target_s *target)
{
- FNC_INFO_NOTIMPLEMENTED;
-
- return ERROR_OK;
+ /* Initialize anything we can set up without talking to the target */
+ return arm11_build_reg_cache(target);
}
-int arm11_remove_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
+/* talk to the target and set things up */
+static int arm11_examine(struct target_s *target)
{
- FNC_INFO_NOTIMPLEMENTED;
+ int retval;
- return ERROR_OK;
-}
+ FNC_INFO;
+ struct arm11_common * arm11 = target->arch_info;
-/* target algorithm support */
-int arm11_run_algorithm(struct target_s *target, int num_mem_params, mem_param_t *mem_params, int num_reg_params, reg_param_t *reg_param, u32 entry_point, u32 exit_point, int timeout_ms, void *arch_info)
-{
- FNC_INFO_NOTIMPLEMENTED;
+ /* check IDCODE */
- return ERROR_OK;
-}
+ arm11_add_IR(arm11, ARM11_IDCODE, ARM11_TAP_DEFAULT);
-int arm11_target_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct target_s *target)
-{
- FNC_INFO;
+ struct scan_field idcode_field;
+
+ arm11_setup_field(arm11, 32, NULL, &arm11->device_id, &idcode_field);
+
+ arm11_add_dr_scan_vc(1, &idcode_field, TAP_DRPAUSE);
+
+ /* check DIDR */
+
+ arm11_add_debug_SCAN_N(arm11, 0x00, ARM11_TAP_DEFAULT);
+
+ arm11_add_IR(arm11, ARM11_INTEST, ARM11_TAP_DEFAULT);
- if (argc < 4)
- {
- ERROR("'target arm11' 4th argument <jtag chain pos>");
- exit(-1);
- }
+ struct scan_field chain0_fields[2];
+
+ arm11_setup_field(arm11, 32, NULL, &arm11->didr, chain0_fields + 0);
+ arm11_setup_field(arm11, 8, NULL, &arm11->implementor, chain0_fields + 1);
+
+ arm11_add_dr_scan_vc(asizeof(chain0_fields), chain0_fields, TAP_IDLE);
+
+ CHECK_RETVAL(jtag_execute_queue());
+
+ switch (arm11->device_id & 0x0FFFF000)
+ {
+ case 0x07B36000: LOG_INFO("found ARM1136"); break;
+ case 0x07B56000: LOG_INFO("found ARM1156"); break;
+ case 0x07B76000: LOG_INFO("found ARM1176"); break;
+ default:
+ {
+ LOG_ERROR("'target arm11' expects IDCODE 0x*7B*7****");
+ return ERROR_FAIL;
+ }
+ }
- int chain_pos = strtoul(args[3], NULL, 0);
+ arm11->debug_version = (arm11->didr >> 16) & 0x0F;
- NEW(arm11_common_t, arm11, 1);
+ if (arm11->debug_version != ARM11_DEBUG_V6 &&
+ arm11->debug_version != ARM11_DEBUG_V61)
+ {
+ LOG_ERROR("Only ARMv6 v6 and v6.1 architectures supported.");
+ return ERROR_FAIL;
+ }
- arm11->target = target;
+ arm11->brp = ((arm11->didr >> 24) & 0x0F) + 1;
+ arm11->wrp = ((arm11->didr >> 28) & 0x0F) + 1;
- /* prepare JTAG information for the new target */
- arm11->jtag_info.chain_pos = chain_pos;
- arm11->jtag_info.scann_size = 5;
+ /** \todo TODO: reserve one brp slot if we allow breakpoints during step */
+ arm11->free_brps = arm11->brp;
+ arm11->free_wrps = arm11->wrp;
- arm_jtag_setup_connection(&arm11->jtag_info);
+ LOG_DEBUG("IDCODE %08" PRIx32 " IMPLEMENTOR %02x DIDR %08" PRIx32 "",
+ arm11->device_id,
+ (int)(arm11->implementor),
+ arm11->didr);
- jtag_device_t *device = jtag_get_device(chain_pos);
+ /* as a side-effect this reads DSCR and thus
+ * clears the ARM11_DSCR_STICKY_PRECISE_DATA_ABORT / Sticky Precise Data Abort Flag
+ * as suggested by the spec.
+ */
- if (device->ir_length != 5)
- {
- ERROR("'target arm11' expects 'jtag_device 5 0x01 0x1F 0x1E'");
- exit(-1);
- }
+ retval = arm11_check_init(arm11, NULL);
+ if (retval != ERROR_OK)
+ return retval;
- target->arch_info = arm11;
+ target_set_examined(target);
- return ERROR_OK;
+ return ERROR_OK;
}
-int arm11_init_target(struct command_context_s *cmd_ctx, struct target_s *target)
+
+/** Load a register that is marked !valid in the register cache */
+static int arm11_get_reg(reg_t *reg)
{
- FNC_INFO;
+ FNC_INFO;
- arm11_common_t * arm11 = target->arch_info;
+ target_t * target = ((struct arm11_reg_state *)reg->arch_info)->target;
- /* check IDCODE */
+ if (target->state != TARGET_HALTED)
+ {
+ LOG_WARNING("target was not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
- arm11_add_IR(arm11, ARM11_IDCODE, -1);
+ /** \todo TODO: Check this. We assume that all registers are fetched at debug entry. */
- scan_field_t idcode_field;
+#if 0
+ struct arm11_common *arm11 = target->arch_info;
+ const struct arm11_reg_defs * arm11_reg_info = arm11_reg_defs + ((struct arm11_reg_state *)reg->arch_info)->def_index;
+#endif
- arm11_setup_field(arm11, 32, NULL, &arm11->device_id, &idcode_field);
+ return ERROR_OK;
+}
- arm11_add_dr_scan_vc(1, &idcode_field, TAP_PD);
+/** Change a value in the register cache */
+static int arm11_set_reg(reg_t *reg, uint8_t *buf)
+{
+ FNC_INFO;
- /* check DIDR */
+ target_t * target = ((struct arm11_reg_state *)reg->arch_info)->target;
+ struct arm11_common *arm11 = target->arch_info;
+// const struct arm11_reg_defs * arm11_reg_info = arm11_reg_defs + ((struct arm11_reg_state *)reg->arch_info)->def_index;
- arm11_add_debug_SCAN_N(arm11, 0x00, -1);
+ arm11->reg_values[((struct arm11_reg_state *)reg->arch_info)->def_index] = buf_get_u32(buf, 0, 32);
+ reg->valid = 1;
+ reg->dirty = 1;
- arm11_add_IR(arm11, ARM11_INTEST, -1);
+ return ERROR_OK;
+}
- scan_field_t chain0_fields[2];
+static int arm11_build_reg_cache(target_t *target)
+{
+ struct arm11_common *arm11 = target->arch_info;
- arm11_setup_field(arm11, 32, NULL, &arm11->didr, chain0_fields + 0);
- arm11_setup_field(arm11, 8, NULL, &arm11->implementor, chain0_fields + 1);
+ NEW(reg_cache_t, cache, 1);
+ NEW(reg_t, reg_list, ARM11_REGCACHE_COUNT);
+ NEW(struct arm11_reg_state, arm11_reg_states, ARM11_REGCACHE_COUNT);
- arm11_add_dr_scan_vc(asizeof(chain0_fields), chain0_fields, TAP_RTI);
+ if (arm11_regs_arch_type == -1)
+ arm11_regs_arch_type = register_reg_arch_type(arm11_get_reg, arm11_set_reg);
- jtag_execute_queue();
+ register_init_dummy(&arm11_gdb_dummy_fp_reg);
+ register_init_dummy(&arm11_gdb_dummy_fps_reg);
+ arm11->reg_list = reg_list;
- switch (arm11->device_id & 0x0FFFF000)
- {
- case 0x07B36000: INFO("found ARM1136"); break;
- case 0x07B56000: INFO("found ARM1156"); break;
- case 0x07B76000: INFO("found ARM1176"); break;
- default:
- {
- ERROR("'target arm11' expects IDCODE 0x*7B*7****");
- exit(-1);
- }
- }
+ /* Build the process context cache */
+ cache->name = "arm11 registers";
+ cache->next = NULL;
+ cache->reg_list = reg_list;
+ cache->num_regs = ARM11_REGCACHE_COUNT;
- arm11->debug_version = (arm11->didr >> 16) & 0x0F;
+ reg_cache_t **cache_p = register_get_last_cache_p(&target->reg_cache);
+ (*cache_p) = cache;
- if (arm11->debug_version != ARM11_DEBUG_V6 &&
- arm11->debug_version != ARM11_DEBUG_V61)
- {
- ERROR("Only ARMv6 v6 and v6.1 architectures supported.");
- exit(-1);
- }
+ arm11->core_cache = cache;
+// armv7m->process_context = cache;
+ size_t i;
- arm11->brp = ((arm11->didr >> 24) & 0x0F) + 1;
- arm11->wrp = ((arm11->didr >> 28) & 0x0F) + 1;
+ /* Not very elegant assertion */
+ if (ARM11_REGCACHE_COUNT != asizeof(arm11->reg_values) ||
+ ARM11_REGCACHE_COUNT != asizeof(arm11_reg_defs) ||
+ ARM11_REGCACHE_COUNT != ARM11_RC_MAX)
+ {
+ LOG_ERROR("BUG: arm11->reg_values inconsistent (%d " ZU " " ZU " %d)", ARM11_REGCACHE_COUNT, asizeof(arm11->reg_values), asizeof(arm11_reg_defs), ARM11_RC_MAX);
+ exit(-1);
+ }
- /** \todo TODO: reserve one brp slot if we allow breakpoints during step */
- arm11->free_brps = arm11->brp;
- arm11->free_wrps = arm11->wrp;
+ for (i = 0; i < ARM11_REGCACHE_COUNT; i++)
+ {
+ reg_t * r = reg_list + i;
+ const struct arm11_reg_defs * rd = arm11_reg_defs + i;
+ struct arm11_reg_state * rs = arm11_reg_states + i;
+
+ r->name = rd->name;
+ r->size = 32;
+ r->value = (uint8_t *)(arm11->reg_values + i);
+ r->dirty = 0;
+ r->valid = 0;
+ r->bitfield_desc = NULL;
+ r->num_bitfields = 0;
+ r->arch_type = arm11_regs_arch_type;
+ r->arch_info = rs;
+
+ rs->def_index = i;
+ rs->target = target;
+ }
- DEBUG("IDCODE %08x IMPLEMENTOR %02x DIDR %08x",
- arm11->device_id,
- arm11->implementor,
- arm11->didr);
+ return ERROR_OK;
+}
- arm11_build_reg_cache(target);
+static COMMAND_HELPER(arm11_handle_bool, bool *var, char *name)
+{
+ if (argc == 0)
+ {
+ LOG_INFO("%s is %s.", name, *var ? "enabled" : "disabled");
+ return ERROR_OK;
+ }
+ if (argc != 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
- /* as a side-effect this reads DSCR and thus
- * clears the ARM11_DSCR_STICKY_PRECISE_DATA_ABORT / Sticky Precise Data Abort Flag
- * as suggested by the spec.
- */
+ switch (args[0][0])
+ {
+ case '0': /* 0 */
+ case 'f': /* false */
+ case 'F':
+ case 'd': /* disable */
+ case 'D':
+ *var = false;
+ break;
- arm11_check_init(arm11, NULL);
+ case '1': /* 1 */
+ case 't': /* true */
+ case 'T':
+ case 'e': /* enable */
+ case 'E':
+ *var = true;
+ break;
+ }
- return ERROR_OK;
+ LOG_INFO("%s %s.", *var ? "Enabled" : "Disabled", name);
+
+ return ERROR_OK;
}
-int arm11_quit(void)
+#define BOOL_WRAPPER(name, print_name) \
+COMMAND_HANDLER(arm11_handle_bool_##name) \
+{ \
+ return CALL_COMMAND_HANDLER(arm11_handle_bool, \
+ &arm11_config_##name, print_name); \
+}
+
+BOOL_WRAPPER(memwrite_burst, "memory write burst mode")
+BOOL_WRAPPER(memwrite_error_fatal, "fatal error mode for memory writes")
+BOOL_WRAPPER(step_irq_enable, "IRQs while stepping")
+BOOL_WRAPPER(hardware_step, "hardware single step")
+
+COMMAND_HANDLER(arm11_handle_vcr)
{
- FNC_INFO_NOTIMPLEMENTED;
+ switch (argc) {
+ case 0:
+ break;
+ case 1:
+ COMMAND_PARSE_NUMBER(u32, args[0], arm11_vcr);
+ break;
+ default:
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
- return ERROR_OK;
+ LOG_INFO("VCR 0x%08" PRIx32 "", arm11_vcr);
+ return ERROR_OK;
}
-/** Load a register that is marked !valid in the register cache */
-int arm11_get_reg(reg_t *reg)
+static const uint32_t arm11_coproc_instruction_limits[] =
{
- FNC_INFO;
+ 15, /* coprocessor */
+ 7, /* opcode 1 */
+ 15, /* CRn */
+ 15, /* CRm */
+ 7, /* opcode 2 */
+ 0xFFFFFFFF, /* value */
+};
- target_t * target = ((arm11_reg_state_t *)reg->arch_info)->target;
+static struct arm11_common * arm11_find_target(const char * arg)
+{
+ struct jtag_tap * tap;
+ target_t * t;
- if (target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
+ tap = jtag_tap_by_string(arg);
- /** \todo TODO: Check this. We assume that all registers are fetched at debug entry. */
+ if (!tap)
+ return 0;
-#if 0
- arm11_common_t *arm11 = target->arch_info;
- const arm11_reg_defs_t * arm11_reg_info = arm11_reg_defs + ((arm11_reg_state_t *)reg->arch_info)->def_index;
-#endif
+ for (t = all_targets; t; t = t->next)
+ {
+ if (t->tap != tap)
+ continue;
- return ERROR_OK;
+ /* if (t->type == arm11_target) */
+ if (0 == strcmp(target_get_name(t), "arm11"))
+ return t->arch_info;
+ }
+
+ return 0;
}
-/** Change a value in the register cache */
-int arm11_set_reg(reg_t *reg, u8 *buf)
+static int arm11_mrc_inner(target_t *target, int cpnum,
+ uint32_t op1, uint32_t op2, uint32_t CRn, uint32_t CRm,
+ uint32_t *value, bool read)
{
- FNC_INFO;
+ int retval;
+
+ if (target->state != TARGET_HALTED)
+ {
+ LOG_ERROR("Target not halted");
+ return ERROR_FAIL;
+ }
+
+ struct arm11_common * arm11 = target->arch_info;
- target_t * target = ((arm11_reg_state_t *)reg->arch_info)->target;
- arm11_common_t *arm11 = target->arch_info;
-// const arm11_reg_defs_t * arm11_reg_info = arm11_reg_defs + ((arm11_reg_state_t *)reg->arch_info)->def_index;
+ uint32_t instr = 0xEE000010 |
+ (cpnum << 8) |
+ (op1 << 21) |
+ (CRn << 16) |
+ (CRm << 0) |
+ (op2 << 5);
- arm11->reg_values[((arm11_reg_state_t *)reg->arch_info)->def_index] = buf_get_u32(buf, 0, 32);
- reg->valid = 1;
- reg->dirty = 1;
+ if (read)
+ instr |= 0x00100000;
- return ERROR_OK;
+ retval = arm11_run_instr_data_prepare(arm11);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (read)
+ {
+ retval = arm11_run_instr_data_from_core_via_r0(arm11, instr, value);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+ else
+ {
+ retval = arm11_run_instr_data_to_core_via_r0(arm11, instr, *value);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ return arm11_run_instr_data_finish(arm11);
}
+static int arm11_mrc(target_t *target, int cpnum,
+ uint32_t op1, uint32_t op2, uint32_t CRn, uint32_t CRm, uint32_t *value)
+{
+ return arm11_mrc_inner(target, cpnum, op1, op2, CRn, CRm, value, true);
+}
-void arm11_build_reg_cache(target_t *target)
+static int arm11_mcr(target_t *target, int cpnum,
+ uint32_t op1, uint32_t op2, uint32_t CRn, uint32_t CRm, uint32_t value)
{
- arm11_common_t *arm11 = target->arch_info;
-
- NEW(reg_cache_t, cache, 1);
- NEW(reg_t, reg_list, ARM11_REGCACHE_COUNT);
- NEW(arm11_reg_state_t, arm11_reg_states, ARM11_REGCACHE_COUNT);
-
- if (arm11_regs_arch_type == -1)
- arm11_regs_arch_type = register_reg_arch_type(arm11_get_reg, arm11_set_reg);
-
- arm11->reg_list = reg_list;
-
- /* Build the process context cache */
- cache->name = "arm11 registers";
- cache->next = NULL;
- cache->reg_list = reg_list;
- cache->num_regs = ARM11_REGCACHE_COUNT;
-
- reg_cache_t **cache_p = register_get_last_cache_p(&target->reg_cache);
- (*cache_p) = cache;
-
-// armv7m->core_cache = cache;
-// armv7m->process_context = cache;
-
- size_t i;
-
- /* Not very elegant assertion */
- if (ARM11_REGCACHE_COUNT != asizeof(arm11->reg_values) ||
- ARM11_REGCACHE_COUNT != asizeof(arm11_reg_defs) ||
- ARM11_REGCACHE_COUNT != ARM11_RC_MAX)
- {
- ERROR("arm11->reg_values inconsistent (%d " ZU " " ZU " %d)", ARM11_REGCACHE_COUNT, asizeof(arm11->reg_values), asizeof(arm11_reg_defs), ARM11_RC_MAX);
- exit(-1);
- }
-
- for (i = 0; i < ARM11_REGCACHE_COUNT; i++)
- {
- reg_t * r = reg_list + i;
- const arm11_reg_defs_t * rd = arm11_reg_defs + i;
- arm11_reg_state_t * rs = arm11_reg_states + i;
-
- r->name = rd->name;
- r->size = 32;
- r->value = (u8 *)(arm11->reg_values + i);
- r->dirty = 0;
- r->valid = 0;
- r->bitfield_desc = NULL;
- r->num_bitfields = 0;
- r->arch_type = arm11_regs_arch_type;
- r->arch_info = rs;
-
- rs->def_index = i;
- rs->target = target;
- }
+ return arm11_mrc_inner(target, cpnum, op1, op2, CRn, CRm, &value, false);
}
+static COMMAND_HELPER(arm11_handle_etm_read_write, bool read)
+{
+ if (argc != (read ? 2 : 3))
+ {
+ LOG_ERROR("Invalid number of arguments.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+ struct arm11_common * arm11 = arm11_find_target(args[0]);
+
+ if (!arm11)
+ {
+ LOG_ERROR("Parameter 1 is not the target name of an ARM11 device.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ uint32_t address;
+ COMMAND_PARSE_NUMBER(u32, args[1], address);
+
+ if (!read)
+ {
+ uint32_t value;
+ COMMAND_PARSE_NUMBER(u32, args[2], value);
+
+ LOG_INFO("ETM write register 0x%02" PRIx32 " (%" PRId32 ") = 0x%08" PRIx32 " (%" PRId32 ")",
+ address, address, value, value);
+
+ CHECK_RETVAL(arm11_write_etm(arm11, address, value));
+ }
+ else
+ {
+ uint32_t value;
+
+ CHECK_RETVAL(arm11_read_etm(arm11, address, &value));
+
+ LOG_INFO("ETM read register 0x%02" PRIx32 " (%" PRId32 ") = 0x%08" PRIx32 " (%" PRId32 ")",
+ address, address, value, value);
+ }
-int arm11_handle_bool(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, bool * var, char * name)
-{
- if (argc == 0)
- {
- INFO("%s is %s.", name, *var ? "enabled" : "disabled");
return ERROR_OK;
- }
-
- if (argc != 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- switch (args[0][0])
- {
- case '0': /* 0 */
- case 'f': /* false */
- case 'F':
- case 'd': /* disable */
- case 'D':
- *var = false;
- break;
-
- case '1': /* 1 */
- case 't': /* true */
- case 'T':
- case 'e': /* enable */
- case 'E':
- *var = true;
- break;
- }
-
- INFO("%s %s.", *var ? "Enabled" : "Disabled", name);
-
- return ERROR_OK;
}
-
-#define BOOL_WRAPPER(name, print_name) \
-int arm11_handle_bool_##name(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) \
-{ \
- return arm11_handle_bool(cmd_ctx, cmd, args, argc, &arm11_config_##name, print_name); \
+COMMAND_HANDLER(arm11_handle_etmr)
+{
+ return CALL_COMMAND_HANDLER(arm11_handle_etm_read_write, true);
}
-#define RC_TOP(name, descr, more) \
-{ \
- command_t * new_cmd = register_command(cmd_ctx, top_cmd, name, NULL, COMMAND_ANY, descr); \
- command_t * top_cmd = new_cmd; \
- more \
+COMMAND_HANDLER(arm11_handle_etmw)
+{
+ return CALL_COMMAND_HANDLER(arm11_handle_etm_read_write, false);
}
-#define RC_FINAL(name, descr, handler) \
- register_command(cmd_ctx, top_cmd, name, handler, COMMAND_ANY, descr);
+#define ARM11_HANDLER(x) .x = arm11_##x
-#define RC_FINAL_BOOL(name, descr, var) \
- register_command(cmd_ctx, top_cmd, name, arm11_handle_bool_##var, COMMAND_ANY, descr);
+target_type_t arm11_target = {
+ .name = "arm11",
+ ARM11_HANDLER(poll),
+ ARM11_HANDLER(arch_state),
-BOOL_WRAPPER(memwrite_burst, "memory write burst mode")
-BOOL_WRAPPER(memwrite_error_fatal, "fatal error mode for memory writes")
+ ARM11_HANDLER(target_request_data),
+ ARM11_HANDLER(halt),
+ ARM11_HANDLER(resume),
+ ARM11_HANDLER(step),
-int arm11_handle_vcr(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- if (argc == 1)
- {
- arm11_vcr = strtoul(args[0], NULL, 0);
- }
- else if (argc != 0)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- INFO("VCR 0x%08X", arm11_vcr);
- return ERROR_OK;
-}
+ ARM11_HANDLER(assert_reset),
+ ARM11_HANDLER(deassert_reset),
+ ARM11_HANDLER(soft_reset_halt),
+ ARM11_HANDLER(get_gdb_reg_list),
-int arm11_register_commands(struct command_context_s *cmd_ctx)
-{
- FNC_INFO;
+ ARM11_HANDLER(read_memory),
+ ARM11_HANDLER(write_memory),
+
+ ARM11_HANDLER(bulk_write_memory),
+
+ ARM11_HANDLER(checksum_memory),
- command_t * top_cmd = NULL;
+ ARM11_HANDLER(add_breakpoint),
+ ARM11_HANDLER(remove_breakpoint),
+ ARM11_HANDLER(add_watchpoint),
+ ARM11_HANDLER(remove_watchpoint),
- RC_TOP( "arm11", "arm11 specific commands",
+ ARM11_HANDLER(run_algorithm),
- RC_TOP( "memwrite", "Control memory write transfer mode",
+ ARM11_HANDLER(register_commands),
+ ARM11_HANDLER(target_create),
+ ARM11_HANDLER(init_target),
+ ARM11_HANDLER(examine),
- RC_FINAL_BOOL( "burst", "Enable/Disable non-standard but fast burst mode (default: enabled)",
- memwrite_burst)
+ ARM11_HANDLER(mrc),
+ ARM11_HANDLER(mcr),
+ };
- RC_FINAL_BOOL( "error_fatal",
- "Terminate program if transfer error was found (default: enabled)",
- memwrite_error_fatal)
- )
- RC_FINAL( "vcr", "Control (Interrupt) Vector Catch Register",
- arm11_handle_vcr)
- )
+int arm11_register_commands(struct command_context_s *cmd_ctx)
+{
+ FNC_INFO;
+
+ command_t *top_cmd, *mw_cmd;
+
+ top_cmd = register_command(cmd_ctx, NULL, "arm11",
+ NULL, COMMAND_ANY, NULL);
+
+ register_command(cmd_ctx, top_cmd, "etmr",
+ arm11_handle_etmr, COMMAND_ANY,
+ "Read Embedded Trace Macrocell (ETM) register. etmr <jtag_target> <ETM register address>");
+
+ register_command(cmd_ctx, top_cmd, "etmw",
+ arm11_handle_etmw, COMMAND_ANY,
+ "Write Embedded Trace Macrocell (ETM) register. etmr <jtag_target> <ETM register address> <value>");
+
+ /* "hardware_step" is only here to check if the default
+ * simulate + breakpoint implementation is broken.
+ * TEMPORARY! NOT DOCUMENTED!
+ */
+ register_command(cmd_ctx, top_cmd, "hardware_step",
+ arm11_handle_bool_hardware_step, COMMAND_ANY,
+ "DEBUG ONLY - Hardware single stepping"
+ " (default: disabled)");
+
+ mw_cmd = register_command(cmd_ctx, top_cmd, "memwrite",
+ NULL, COMMAND_ANY, NULL);
+ register_command(cmd_ctx, mw_cmd, "burst",
+ arm11_handle_bool_memwrite_burst, COMMAND_ANY,
+ "Enable/Disable non-standard but fast burst mode"
+ " (default: enabled)");
+ register_command(cmd_ctx, mw_cmd, "error_fatal",
+ arm11_handle_bool_memwrite_error_fatal, COMMAND_ANY,
+ "Terminate program if transfer error was found"
+ " (default: enabled)");
+
+ register_command(cmd_ctx, top_cmd, "step_irq_enable",
+ arm11_handle_bool_step_irq_enable, COMMAND_ANY,
+ "Enable interrupts while stepping"
+ " (default: disabled)");
+ register_command(cmd_ctx, top_cmd, "vcr",
+ arm11_handle_vcr, COMMAND_ANY,
+ "Control (Interrupt) Vector Catch Register");
- return ERROR_OK;
+ return ERROR_OK;
}
Code Review / openocd.git / blobdiff