ARM11: use shared DSCR bit names
[openocd.git] / src / target / arm11.h
index d40faa4faa68dd1cedc97fc0fa7b38a0af2a1577..5f78db5dfab966b81cf5782edff0d0081291b1f9 100644 (file)
 #ifndef ARM11_H
 #define ARM11_H
 
-#include "armv4_5.h"
-
-/* TEMPORARY -- till we switch to the shared infrastructure */
-#define ARM11_REGCACHE_COUNT           20
+#include <target/armv4_5.h>
+#include <target/arm_dpm.h>
 
 #define ARM11_TAP_DEFAULT                      TAP_INVALID
 
                }                               \
        } while (0)
 
-struct arm11_register_history
-{
-       uint32_t                value;
-       uint8_t         valid;
-};
-
+/* bits from ARMv7 DIDR */
 enum arm11_debug_version
 {
        ARM11_DEBUG_V6                  = 0x01,
@@ -57,37 +50,23 @@ enum arm11_debug_version
 struct arm11_common
 {
        struct arm      arm;
-       struct target * target;         /**< Reference back to the owner */
 
-       /** \name Processor type detection */
-       /*@{*/
+       /** Debug module state. */
+       struct arm_dpm dpm;
 
        size_t  brp;                    /**< Number of Breakpoint Register Pairs from DIDR      */
        size_t  wrp;                    /**< Number of Watchpoint Register Pairs from DIDR      */
+       size_t  free_brps;              /**< Number of breakpoints allocated */
 
-       /*@}*/
-
-       uint32_t                last_dscr;              /**< Last retrieved DSCR value;
-                                                            Use only for debug message generation              */
-
-       bool    simulate_reset_on_next_halt;    /**< Perform cleanups of the ARM state on next halt */
-
-       /** \name Shadow registers to save processor state */
-       /*@{*/
-
-       struct reg *    reg_list;                                                       /**< target register list */
-       uint32_t                reg_values[ARM11_REGCACHE_COUNT];       /**< data for registers */
+       uint32_t dscr;                  /**< Last retrieved DSCR value. */
 
-       /*@}*/
+       uint32_t saved_rdtr;
+       uint32_t saved_wdtr;
 
-       struct arm11_register_history
-               reg_history[ARM11_REGCACHE_COUNT];      /**< register state before last resume */
+       bool is_rdtr_saved;
+       bool is_wdtr_saved;
 
-       size_t  free_brps;                              /**< keep track of breakpoints allocated by arm11_add_breakpoint() */
-       size_t  free_wrps;                              /**< keep track of breakpoints allocated by arm11_add_watchpoint() */
-
-       // GA
-       struct reg_cache *core_cache;
+       bool    simulate_reset_on_next_halt;    /**< Perform cleanups of the ARM state on next halt */
 
        struct arm_jtag jtag_info;
 };
@@ -117,8 +96,6 @@ enum arm11_instructions
 
 enum arm11_dscr
 {
-       ARM11_DSCR_CORE_HALTED                                                                  = 1 << 0,
-       ARM11_DSCR_CORE_RESTARTED                                                               = 1 << 1,
 
        ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_MASK                                   = 0x0F << 2,
        ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_HALT                                   = 0x00 << 2,
@@ -127,20 +104,6 @@ enum arm11_dscr
        ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_BKPT_INSTRUCTION               = 0x03 << 2,
        ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_EDBGRQ                                 = 0x04 << 2,
        ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_VECTOR_CATCH                   = 0x05 << 2,
-
-       ARM11_DSCR_STICKY_PRECISE_DATA_ABORT                                    = 1 << 6,
-       ARM11_DSCR_STICKY_IMPRECISE_DATA_ABORT                                  = 1 << 7,
-       ARM11_DSCR_INTERRUPTS_DISABLE                                                   = 1 << 11,
-       ARM11_DSCR_EXECUTE_ARM_INSTRUCTION_ENABLE                               = 1 << 13,
-       ARM11_DSCR_MODE_SELECT                                                                  = 1 << 14,
-       ARM11_DSCR_WDTR_FULL                                                                    = 1 << 29,
-       ARM11_DSCR_RDTR_FULL                                                                    = 1 << 30,
-};
-
-enum arm11_cpsr
-{
-       ARM11_CPSR_T                            = 1 << 5,
-       ARM11_CPSR_J                            = 1 << 24,
 };
 
 enum arm11_sc7
@@ -154,10 +117,4 @@ enum arm11_sc7
        ARM11_SC7_WCR0                          = 112,
 };
 
-struct arm11_reg_state
-{
-       uint32_t                                def_index;
-       struct target *                 target;
-};
-
 #endif /* ARM11_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)