FLASH/NOR: Remove useless file stellaris.h
[openocd.git] / src / target / arm7_9_common.c
index d1e7a93e10c016e9089200acca42c738c1c306ec..778e606b608adfd1a57644f5802b946d6630b7ba 100644 (file)
@@ -2,7 +2,7 @@
  *   Copyright (C) 2005 by Dominic Rath                                    *
  *   Dominic.Rath@gmx.de                                                   *
  *                                                                         *
- *   Copyright (C) 2007-2009 Øyvind Harboe                                 *
+ *   Copyright (C) 2007-2010 Øyvind Harboe                                 *
  *   oyvind.harboe@zylin.com                                               *
  *                                                                         *
  *   Copyright (C) 2008 by Spencer Oliver                                  *
@@ -184,7 +184,7 @@ static int arm7_9_set_software_breakpoints(struct arm7_9_common *arm7_9)
  * @param target Pointer to an ARM7/9 target to setup
  * @return Result of clearing the watchpoints on the target
  */
-int arm7_9_setup(struct target *target)
+static int arm7_9_setup(struct target *target)
 {
        struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
 
@@ -202,7 +202,7 @@ int arm7_9_setup(struct target *target)
  *         queue.  For software breakpoints, this will be the status of the
  *         required memory reads and writes
  */
-int arm7_9_set_breakpoint(struct target *target, struct breakpoint *breakpoint)
+static int arm7_9_set_breakpoint(struct target *target, struct breakpoint *breakpoint)
 {
        struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
        int retval = ERROR_OK;
@@ -331,7 +331,7 @@ int arm7_9_set_breakpoint(struct target *target, struct breakpoint *breakpoint)
  *         queue.  For software breakpoints, this will be the status of the
  *         required memory reads and writes
  */
-int arm7_9_unset_breakpoint(struct target *target, struct breakpoint *breakpoint)
+static int arm7_9_unset_breakpoint(struct target *target, struct breakpoint *breakpoint)
 {
        int retval = ERROR_OK;
        struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
@@ -377,6 +377,7 @@ int arm7_9_unset_breakpoint(struct target *target, struct breakpoint *breakpoint
                        {
                                return retval;
                        }
+                        current_instr = target_buffer_get_u32(target, (uint8_t *)&current_instr);
                        if (current_instr == arm7_9->arm_bkpt)
                                if ((retval = target_write_memory(target, breakpoint->address, 4, 1, breakpoint->orig_instr)) != ERROR_OK)
                                {
@@ -506,7 +507,7 @@ int arm7_9_remove_breakpoint(struct target *target, struct breakpoint *breakpoin
  * @return Error status if watchpoint set fails or the result of executing the
  *         JTAG queue
  */
-int arm7_9_set_watchpoint(struct target *target, struct watchpoint *watchpoint)
+static int arm7_9_set_watchpoint(struct target *target, struct watchpoint *watchpoint)
 {
        int retval = ERROR_OK;
        struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
@@ -577,7 +578,7 @@ int arm7_9_set_watchpoint(struct target *target, struct watchpoint *watchpoint)
  * @return Error status while trying to unset the watchpoint or the result of
  *         executing the JTAG queue
  */
-int arm7_9_unset_watchpoint(struct target *target, struct watchpoint *watchpoint)
+static int arm7_9_unset_watchpoint(struct target *target, struct watchpoint *watchpoint)
 {
        int retval = ERROR_OK;
        struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
@@ -687,12 +688,15 @@ int arm7_9_execute_sys_speed(struct target *target)
        struct reg *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
 
        /* set RESTART instruction */
-       jtag_set_end_state(TAP_IDLE);
        if (arm7_9->need_bypass_before_restart) {
                arm7_9->need_bypass_before_restart = 0;
-               arm_jtag_set_instr(jtag_info, 0xf, NULL);
+               retval = arm_jtag_set_instr(jtag_info, 0xf, NULL, TAP_IDLE);
+               if (retval != ERROR_OK)
+                       return retval;
        }
-       arm_jtag_set_instr(jtag_info, 0x4, NULL);
+       retval = arm_jtag_set_instr(jtag_info, 0x4, NULL, TAP_IDLE);
+       if (retval != ERROR_OK)
+               return retval;
 
        long long then = timeval_ms();
        int timeout;
@@ -730,7 +734,7 @@ int arm7_9_execute_sys_speed(struct target *target)
  * @param target Pointer to the target to issue commands to
  * @return Always ERROR_OK
  */
-int arm7_9_execute_fast_sys_speed(struct target *target)
+static int arm7_9_execute_fast_sys_speed(struct target *target)
 {
        static int set = 0;
        static uint8_t check_value[4], check_mask[4];
@@ -738,14 +742,18 @@ int arm7_9_execute_fast_sys_speed(struct target *target)
        struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
        struct arm_jtag *jtag_info = &arm7_9->jtag_info;
        struct reg *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
+       int retval;
 
        /* set RESTART instruction */
-       jtag_set_end_state(TAP_IDLE);
        if (arm7_9->need_bypass_before_restart) {
                arm7_9->need_bypass_before_restart = 0;
-               arm_jtag_set_instr(jtag_info, 0xf, NULL);
+               retval = arm_jtag_set_instr(jtag_info, 0xf, NULL, TAP_IDLE);
+               if (retval != ERROR_OK)
+                       return retval;
        }
-       arm_jtag_set_instr(jtag_info, 0x4, NULL);
+       retval = arm_jtag_set_instr(jtag_info, 0x4, NULL, TAP_IDLE);
+       if (retval != ERROR_OK)
+               return retval;
 
        if (!set)
        {
@@ -806,7 +814,7 @@ int arm7_9_target_request_data(struct target *target, uint32_t size, uint8_t *bu
  * @return ERROR_OK unless there are issues with the JTAG queue or when reading
  *                  from the Embedded ICE unit
  */
-int arm7_9_handle_target_request(void *priv)
+static int arm7_9_handle_target_request(void *priv)
 {
        int retval = ERROR_OK;
        struct target *target = priv;
@@ -995,7 +1003,7 @@ int arm7_9_assert_reset(struct target *target)
                         * certain ARM9 cores (maybe more) - AT91SAM9260
                         * and STR9
                         */
-                       jtag_add_runtest(1, jtag_get_end_state());
+                       jtag_add_runtest(1, TAP_IDLE);
                }
                else
                {
@@ -1066,24 +1074,29 @@ int arm7_9_deassert_reset(struct target *target)
        /* deassert reset lines */
        jtag_add_reset(0, 0);
 
+       /* In case polling is disabled, we need to examine the
+        * target and poll here for this target to work correctly.
+        *
+        * Otherwise, e.g. halt will fail afterwards with bogus
+        * error messages as halt will believe that reset is
+        * still in effect.
+        */
+       if ((retval = target_examine_one(target)) != ERROR_OK)
+               return retval;
+
+       if ((retval = target_poll(target)) != ERROR_OK)
+       {
+               return retval;
+       }
+
        enum reset_types jtag_reset_config = jtag_get_reset_config();
        if (target->reset_halt && (jtag_reset_config & RESET_SRST_PULLS_TRST) != 0)
        {
                LOG_WARNING("srst pulls trst - can not reset into halted mode. Issuing halt after reset.");
-               /* set up embedded ice registers again */
-               if ((retval = target_examine_one(target)) != ERROR_OK)
-                       return retval;
-
-               if ((retval = target_poll(target)) != ERROR_OK)
-               {
-                       return retval;
-               }
-
                if ((retval = target_halt(target)) != ERROR_OK)
                {
                        return retval;
                }
-
        }
        return retval;
 }
@@ -1097,7 +1110,7 @@ int arm7_9_deassert_reset(struct target *target)
  * @param target Pointer to the ARM7/9 target to have halt cleared
  * @return Always ERROR_OK
  */
-int arm7_9_clear_halt(struct target *target)
+static int arm7_9_clear_halt(struct target *target)
 {
        struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
        struct reg *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
@@ -1471,7 +1484,11 @@ static int arm7_9_debug_entry(struct target *target)
                return retval;
 
        if (arm7_9->post_debug_entry)
-               arm7_9->post_debug_entry(target);
+       {
+               retval = arm7_9->post_debug_entry(target);
+               if (retval != ERROR_OK)
+                       return retval;
+       }
 
        return ERROR_OK;
 }
@@ -1485,7 +1502,7 @@ static int arm7_9_debug_entry(struct target *target)
  * @return Error if the target is not halted, has an invalid core mode, or if
  *         the JTAG queue fails to execute
  */
-int arm7_9_full_context(struct target *target)
+static int arm7_9_full_context(struct target *target)
 {
        int i;
        int retval;
@@ -1501,7 +1518,10 @@ int arm7_9_full_context(struct target *target)
        }
 
        if (!is_arm_mode(armv4_5->core_mode))
+       {
+               LOG_ERROR("not a valid arm core mode - communication failure?");
                return ERROR_FAIL;
+       }
 
        /* iterate through processor modes (User, FIQ, IRQ, SVC, ABT, UND)
         * SYS shares registers with User, so we don't touch SYS
@@ -1581,7 +1601,7 @@ int arm7_9_full_context(struct target *target)
  * @return Error status if the target is not halted or the core mode in the
  *         armv4_5 struct is invalid.
  */
-int arm7_9_restore_context(struct target *target)
+static int arm7_9_restore_context(struct target *target)
 {
        struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
        struct arm *armv4_5 = &arm7_9->armv4_5_common;
@@ -1604,7 +1624,10 @@ int arm7_9_restore_context(struct target *target)
                arm7_9->pre_restore_context(target);
 
        if (!is_arm_mode(armv4_5->core_mode))
+       {
+               LOG_ERROR("not a valid arm core mode - communication failure?");
                return ERROR_FAIL;
+       }
 
        /* iterate through processor modes (User, FIQ, IRQ, SVC, ABT, UND)
         * SYS shares registers with User, so we don't touch SYS
@@ -1737,20 +1760,25 @@ int arm7_9_restore_context(struct target *target)
  * @param target Pointer to the ARM7/9 target to be restarted
  * @return Result of executing the JTAG queue
  */
-int arm7_9_restart_core(struct target *target)
+static int arm7_9_restart_core(struct target *target)
 {
        struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
        struct arm_jtag *jtag_info = &arm7_9->jtag_info;
+       int retval;
 
        /* set RESTART instruction */
-       jtag_set_end_state(TAP_IDLE);
        if (arm7_9->need_bypass_before_restart) {
                arm7_9->need_bypass_before_restart = 0;
-               arm_jtag_set_instr(jtag_info, 0xf, NULL);
+
+               retval = arm_jtag_set_instr(jtag_info, 0xf, NULL, TAP_IDLE);
+               if (retval != ERROR_OK)
+                       return retval;
        }
-       arm_jtag_set_instr(jtag_info, 0x4, NULL);
+       retval = arm_jtag_set_instr(jtag_info, 0x4, NULL, TAP_IDLE);
+       if (retval != ERROR_OK)
+               return retval;
 
-       jtag_add_runtest(1, jtag_set_end_state(TAP_IDLE));
+       jtag_add_runtest(1, TAP_IDLE);
        return jtag_execute_queue();
 }
 
@@ -1760,7 +1788,7 @@ int arm7_9_restart_core(struct target *target)
  *
  * @param target Pointer to the ARM7/9 target to enable watchpoints on
  */
-void arm7_9_enable_watchpoints(struct target *target)
+static void arm7_9_enable_watchpoints(struct target *target)
 {
        struct watchpoint *watchpoint = target->watchpoints;
 
@@ -1778,7 +1806,7 @@ void arm7_9_enable_watchpoints(struct target *target)
  *
  * @param target Pointer to the ARM7/9 target to enable breakpoints on
  */
-void arm7_9_enable_breakpoints(struct target *target)
+static void arm7_9_enable_breakpoints(struct target *target)
 {
        struct breakpoint *breakpoint = target->breakpoints;
 
@@ -1880,7 +1908,9 @@ int arm7_9_resume(struct target *target, int current, uint32_t address, int hand
                                return err;
                        }
 
-                       arm7_9_debug_entry(target);
+                       retval = arm7_9_debug_entry(target);
+                       if (retval != ERROR_OK)
+                               return retval;
                        LOG_DEBUG("new PC after step: 0x%8.8" PRIx32,
                                        buf_get_u32(armv4_5->pc->value, 0, 32));
 
@@ -2081,7 +2111,9 @@ int arm7_9_step(struct target *target, int current, uint32_t address, int handle
        {
                target->state = TARGET_UNKNOWN;
        } else {
-               arm7_9_debug_entry(target);
+               retval = arm7_9_debug_entry(target);
+               if (retval != ERROR_OK)
+                       return retval;
                if ((retval = target_call_event_callbacks(target, TARGET_EVENT_HALTED)) != ERROR_OK)
                {
                        return retval;
@@ -2465,7 +2497,20 @@ int arm7_9_write_memory(struct target *target, uint32_t address, uint32_t size,
                                if (arm7_9->fast_memory_access)
                                        retval = arm7_9_execute_fast_sys_speed(target);
                                else
+                               {
                                        retval = arm7_9_execute_sys_speed(target);
+
+                                       /*
+                                        * if memory writes are made when the clock is running slow
+                                        * (i.e. 32 kHz) which is necessary in some scripts to reconfigure
+                                        * processor operations after a "reset halt" or "reset init",
+                                        * need to immediately stroke the keep alive or will end up with
+                                        * gdb "keep alive not sent error message" problem.
+                                        */
+
+                                       keep_alive();
+                               }
+
                                if (retval != ERROR_OK)
                                {
                                        return retval;
@@ -2501,7 +2546,20 @@ int arm7_9_write_memory(struct target *target, uint32_t address, uint32_t size,
                                        if (arm7_9->fast_memory_access)
                                                retval = arm7_9_execute_fast_sys_speed(target);
                                        else
+                                       {
                                                retval = arm7_9_execute_sys_speed(target);
+
+                                               /*
+                                                * if memory writes are made when the clock is running slow
+                                                * (i.e. 32 kHz) which is necessary in some scripts to reconfigure
+                                                * processor operations after a "reset halt" or "reset init",
+                                                * need to immediately stroke the keep alive or will end up with
+                                                * gdb "keep alive not sent error message" problem.
+                                                */     
+
+                                               keep_alive();
+                                       }
+
                                        if (retval != ERROR_OK)
                                        {
                                                return retval;
@@ -2536,7 +2594,20 @@ int arm7_9_write_memory(struct target *target, uint32_t address, uint32_t size,
                                        if (arm7_9->fast_memory_access)
                                                retval = arm7_9_execute_fast_sys_speed(target);
                                        else
-                                               retval = arm7_9_execute_sys_speed(target);
+                                        {
+                                                retval = arm7_9_execute_sys_speed(target);
+
+                                                /*
+                                                 * if memory writes are made when the clock is running slow
+                                                 * (i.e. 32 kHz) which is necessary in some scripts to reconfigure
+                                                 * processor operations after a "reset halt" or "reset init",
+                                                 * need to immediately stroke the keep alive or will end up with
+                                                 * gdb "keep alive not sent error message" problem.
+                                                 */
+
+                                                keep_alive();
+                                        }
+
                                        if (retval != ERROR_OK)
                                        {
                                                return retval;
@@ -2831,7 +2902,7 @@ COMMAND_HANDLER(handle_arm7_9_dcc_downloads_command)
        return ERROR_OK;
 }
 
-int arm7_9_setup_semihosting(struct target *target, int enable)
+static int arm7_9_setup_semihosting(struct target *target, int enable)
 {
        struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
 

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)