* *
* Copyright (C) 2009-2010 by David Brownell *
* *
+ * Copyright (C) 2013 by Andreas Fritiofson *
+ * andreas.fritiofson@gmail.com *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
/**
#include "config.h"
#endif
+#include "jtag/interface.h"
#include "arm.h"
#include "arm_adi_v5.h"
+#include <helper/jep106.h>
#include <helper/time_support.h>
-
+#include <helper/list.h>
/* ARM ADI Specification requires at least 10 bits used for TAR autoincrement */
*/
static uint32_t max_tar_block_size(uint32_t tar_autoincr_block, uint32_t address)
{
- return (tar_autoincr_block - ((tar_autoincr_block - 1) & address)) >> 2;
+ return tar_autoincr_block - ((tar_autoincr_block - 1) & address);
}
/***************************************************************************
* *
***************************************************************************/
-/**
- * Select one of the APs connected to the specified DAP. The
- * selection is implicitly used with future AP transactions.
- * This is a NOP if the specified AP is already selected.
- *
- * @param dap The DAP
- * @param apsel Number of the AP to (implicitly) use with further
- * transactions. This normally identifies a MEM-AP.
- */
-void dap_ap_select(struct adiv5_dap *dap,uint8_t ap)
+static int mem_ap_setup_csw(struct adiv5_ap *ap, uint32_t csw)
{
- uint32_t new_ap = (ap << 24) & 0xFF000000;
+ csw = csw | CSW_DBGSWENABLE | CSW_MASTER_DEBUG | CSW_HPROT |
+ ap->csw_default;
- if (new_ap != dap->ap_current)
- {
- dap->ap_current = new_ap;
- /* Switching AP invalidates cached values.
- * Values MUST BE UPDATED BEFORE AP ACCESS.
- */
- dap->ap_bank_value = -1;
- dap->ap_csw_value = -1;
- dap->ap_tar_value = -1;
+ if (csw != ap->csw_value) {
+ /* LOG_DEBUG("DAP: Set CSW %x",csw); */
+ int retval = dap_queue_ap_write(ap, MEM_AP_REG_CSW, csw);
+ if (retval != ERROR_OK)
+ return retval;
+ ap->csw_value = csw;
+ }
+ return ERROR_OK;
+}
+
+static int mem_ap_setup_tar(struct adiv5_ap *ap, uint32_t tar)
+{
+ if (!ap->tar_valid || tar != ap->tar_value) {
+ /* LOG_DEBUG("DAP: Set TAR %x",tar); */
+ int retval = dap_queue_ap_write(ap, MEM_AP_REG_TAR, tar);
+ if (retval != ERROR_OK)
+ return retval;
+ ap->tar_value = tar;
+ ap->tar_valid = true;
+ }
+ return ERROR_OK;
+}
+
+static int mem_ap_read_tar(struct adiv5_ap *ap, uint32_t *tar)
+{
+ int retval = dap_queue_ap_read(ap, MEM_AP_REG_TAR, tar);
+ if (retval != ERROR_OK) {
+ ap->tar_valid = false;
+ return retval;
+ }
+
+ retval = dap_run(ap->dap);
+ if (retval != ERROR_OK) {
+ ap->tar_valid = false;
+ return retval;
+ }
+
+ ap->tar_value = *tar;
+ ap->tar_valid = true;
+ return ERROR_OK;
+}
+
+static uint32_t mem_ap_get_tar_increment(struct adiv5_ap *ap)
+{
+ switch (ap->csw_value & CSW_ADDRINC_MASK) {
+ case CSW_ADDRINC_SINGLE:
+ switch (ap->csw_value & CSW_SIZE_MASK) {
+ case CSW_8BIT:
+ return 1;
+ case CSW_16BIT:
+ return 2;
+ case CSW_32BIT:
+ return 4;
+ }
+ case CSW_ADDRINC_PACKED:
+ return 4;
}
+ return 0;
+}
+
+/* mem_ap_update_tar_cache is called after an access to MEM_AP_REG_DRW
+ */
+static void mem_ap_update_tar_cache(struct adiv5_ap *ap)
+{
+ if (!ap->tar_valid)
+ return;
+
+ uint32_t inc = mem_ap_get_tar_increment(ap);
+ if (inc >= max_tar_block_size(ap->tar_autoincr_block, ap->tar_value))
+ ap->tar_valid = false;
+ else
+ ap->tar_value += inc;
}
/**
* Queue transactions setting up transfer parameters for the
* currently selected MEM-AP.
*
- * Subsequent transfers using registers like AP_REG_DRW or AP_REG_BD2
+ * Subsequent transfers using registers like MEM_AP_REG_DRW or MEM_AP_REG_BD2
* initiate data reads or writes using memory or peripheral addresses.
* If the CSW is configured for it, the TAR may be automatically
* incremented after each transfer.
*
- * @todo Rename to reflect it being specifically a MEM-AP function.
- *
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP.
* @param csw MEM-AP Control/Status Word (CSW) register to assign. If this
* matches the cached value, the register is not changed.
* @param tar MEM-AP Transfer Address Register (TAR) to assign. If this
*
* @return ERROR_OK if the transaction was properly queued, else a fault code.
*/
-int dap_setup_accessport(struct adiv5_dap *dap, uint32_t csw, uint32_t tar)
+static int mem_ap_setup_transfer(struct adiv5_ap *ap, uint32_t csw, uint32_t tar)
{
int retval;
-
- csw = csw | CSW_DBGSWENABLE | CSW_MASTER_DEBUG | CSW_HPROT;
- if (csw != dap->ap_csw_value)
- {
- /* LOG_DEBUG("DAP: Set CSW %x",csw); */
- retval = dap_queue_ap_write(dap, AP_REG_CSW, csw);
- if (retval != ERROR_OK)
- return retval;
- dap->ap_csw_value = csw;
- }
- if (tar != dap->ap_tar_value)
- {
- /* LOG_DEBUG("DAP: Set TAR %x",tar); */
- retval = dap_queue_ap_write(dap, AP_REG_TAR, tar);
- if (retval != ERROR_OK)
- return retval;
- dap->ap_tar_value = tar;
- }
- /* Disable TAR cache when autoincrementing */
- if (csw & CSW_ADDRINC_MASK)
- dap->ap_tar_value = -1;
+ retval = mem_ap_setup_csw(ap, csw);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_setup_tar(ap, tar);
+ if (retval != ERROR_OK)
+ return retval;
return ERROR_OK;
}
/**
* Asynchronous (queued) read of a word from memory or a system register.
*
- * @param dap The DAP connected to the MEM-AP performing the read.
+ * @param ap The MEM-AP to access.
* @param address Address of the 32-bit word to read; it must be
* readable by the currently selected MEM-AP.
* @param value points to where the word will be stored when the
*
* @return ERROR_OK for success. Otherwise a fault code.
*/
-int mem_ap_read_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_read_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t *value)
{
int retval;
/* Use banked addressing (REG_BDx) to avoid some link traffic
* (updating TAR) when reading several consecutive addresses.
*/
- retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_OFF,
+ retval = mem_ap_setup_transfer(ap,
+ CSW_32BIT | (ap->csw_value & CSW_ADDRINC_MASK),
address & 0xFFFFFFF0);
if (retval != ERROR_OK)
return retval;
- return dap_queue_ap_read(dap, AP_REG_BD0 | (address & 0xC), value);
+ return dap_queue_ap_read(ap, MEM_AP_REG_BD0 | (address & 0xC), value);
}
/**
* Synchronous read of a word from memory or a system register.
* As a side effect, this flushes any queued transactions.
*
- * @param dap The DAP connected to the MEM-AP performing the read.
+ * @param ap The MEM-AP to access.
* @param address Address of the 32-bit word to read; it must be
* readable by the currently selected MEM-AP.
* @param value points to where the result will be stored.
* @return ERROR_OK for success; *value holds the result.
* Otherwise a fault code.
*/
-int mem_ap_read_atomic_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_read_atomic_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t *value)
{
int retval;
- retval = mem_ap_read_u32(dap, address, value);
+ retval = mem_ap_read_u32(ap, address, value);
if (retval != ERROR_OK)
return retval;
- return dap_run(dap);
+ return dap_run(ap->dap);
}
/**
* Asynchronous (queued) write of a word to memory or a system register.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param address Address to be written; it must be writable by
* the currently selected MEM-AP.
* @param value Word that will be written to the address when transaction
*
* @return ERROR_OK for success. Otherwise a fault code.
*/
-int mem_ap_write_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_write_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t value)
{
int retval;
/* Use banked addressing (REG_BDx) to avoid some link traffic
* (updating TAR) when writing several consecutive addresses.
*/
- retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_OFF,
+ retval = mem_ap_setup_transfer(ap,
+ CSW_32BIT | (ap->csw_value & CSW_ADDRINC_MASK),
address & 0xFFFFFFF0);
if (retval != ERROR_OK)
return retval;
- return dap_queue_ap_write(dap, AP_REG_BD0 | (address & 0xC),
+ return dap_queue_ap_write(ap, MEM_AP_REG_BD0 | (address & 0xC),
value);
}
* Synchronous write of a word to memory or a system register.
* As a side effect, this flushes any queued transactions.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param address Address to be written; it must be writable by
* the currently selected MEM-AP.
* @param value Word that will be written.
*
* @return ERROR_OK for success; the data was written. Otherwise a fault code.
*/
-int mem_ap_write_atomic_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_write_atomic_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t value)
{
- int retval = mem_ap_write_u32(dap, address, value);
+ int retval = mem_ap_write_u32(ap, address, value);
if (retval != ERROR_OK)
return retval;
- return dap_run(dap);
+ return dap_run(ap->dap);
}
-/*****************************************************************************
-* *
-* mem_ap_write_buf(struct adiv5_dap *dap, uint8_t *buffer, int count, uint32_t address) *
-* *
-* Write a buffer in target order (little endian) *
-* *
-*****************************************************************************/
-int mem_ap_write_buf_u32(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
+/**
+ * Synchronous write of a block of memory, using a specific access size.
+ *
+ * @param ap The MEM-AP to access.
+ * @param buffer The data buffer to write. No particular alignment is assumed.
+ * @param size Which access size to use, in bytes. 1, 2 or 4.
+ * @param count The number of writes to do (in size units, not bytes).
+ * @param address Address to be written; it must be writable by the currently selected MEM-AP.
+ * @param addrinc Whether the target address should be increased for each write or not. This
+ * should normally be true, except when writing to e.g. a FIFO.
+ * @return ERROR_OK on success, otherwise an error code.
+ */
+static int mem_ap_write(struct adiv5_ap *ap, const uint8_t *buffer, uint32_t size, uint32_t count,
+ uint32_t address, bool addrinc)
{
- int wcount, blocksize, writecount, errorcount = 0, retval = ERROR_OK;
- uint32_t adr = address;
- const uint8_t* pBuffer = buffer;
-
- count >>= 2;
- wcount = count;
+ struct adiv5_dap *dap = ap->dap;
+ size_t nbytes = size * count;
+ const uint32_t csw_addrincr = addrinc ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
+ uint32_t csw_size;
+ uint32_t addr_xor;
+ int retval;
- /* if we have an unaligned access - reorder data */
- if (adr & 0x3u)
- {
- for (writecount = 0; writecount < count; writecount++)
- {
- int i;
- uint32_t outvalue;
- memcpy(&outvalue, pBuffer, sizeof(uint32_t));
-
- for (i = 0; i < 4; i++)
- {
- *((uint8_t*)pBuffer + (adr & 0x3)) = outvalue;
- outvalue >>= 8;
- adr++;
- }
- pBuffer += sizeof(uint32_t);
- }
+ /* TI BE-32 Quirks mode:
+ * Writes on big-endian TMS570 behave very strangely. Observed behavior:
+ * size write address bytes written in order
+ * 4 TAR ^ 0 (val >> 24), (val >> 16), (val >> 8), (val)
+ * 2 TAR ^ 2 (val >> 8), (val)
+ * 1 TAR ^ 3 (val)
+ * For example, if you attempt to write a single byte to address 0, the processor
+ * will actually write a byte to address 3.
+ *
+ * To make writes of size < 4 work as expected, we xor a value with the address before
+ * setting the TAP, and we set the TAP after every transfer rather then relying on
+ * address increment. */
+
+ if (size == 4) {
+ csw_size = CSW_32BIT;
+ addr_xor = 0;
+ } else if (size == 2) {
+ csw_size = CSW_16BIT;
+ addr_xor = dap->ti_be_32_quirks ? 2 : 0;
+ } else if (size == 1) {
+ csw_size = CSW_8BIT;
+ addr_xor = dap->ti_be_32_quirks ? 3 : 0;
+ } else {
+ return ERROR_TARGET_UNALIGNED_ACCESS;
}
- while (wcount > 0)
- {
- /* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
- if (wcount < blocksize)
- blocksize = wcount;
-
- /* handle unaligned data at 4k boundary */
- if (blocksize == 0)
- blocksize = 1;
-
- retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_SINGLE, address);
- if (retval != ERROR_OK)
- return retval;
-
- for (writecount = 0; writecount < blocksize; writecount++)
- {
- retval = dap_queue_ap_write(dap, AP_REG_DRW,
- *(uint32_t *) ((void *) (buffer + 4 * writecount)));
- if (retval != ERROR_OK)
- break;
- }
+ if (ap->unaligned_access_bad && (address % size != 0))
+ return ERROR_TARGET_UNALIGNED_ACCESS;
- if ((retval = dap_run(dap)) == ERROR_OK)
- {
- wcount = wcount - blocksize;
- address = address + 4 * blocksize;
- buffer = buffer + 4 * blocksize;
- }
- else
- {
- errorcount++;
- }
+ while (nbytes > 0) {
+ uint32_t this_size = size;
- if (errorcount > 1)
- {
- LOG_WARNING("Block write error address 0x%" PRIx32 ", wcount 0x%x", address, wcount);
- return retval;
+ /* Select packed transfer if possible */
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
+ this_size = 4;
+ retval = mem_ap_setup_csw(ap, csw_size | CSW_ADDRINC_PACKED);
+ } else {
+ retval = mem_ap_setup_csw(ap, csw_size | csw_addrincr);
}
- }
-
- return retval;
-}
-
-static int mem_ap_write_buf_packed_u16(struct adiv5_dap *dap,
- const uint8_t *buffer, int count, uint32_t address)
-{
- int retval = ERROR_OK;
- int wcount, blocksize, writecount, i;
-
- wcount = count >> 1;
-
- while (wcount > 0)
- {
- int nbytes;
-
- /* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
- if (wcount < blocksize)
- blocksize = wcount;
-
- /* handle unaligned data at 4k boundary */
- if (blocksize == 0)
- blocksize = 1;
+ if (retval != ERROR_OK)
+ break;
- retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_PACKED, address);
+ retval = mem_ap_setup_tar(ap, address ^ addr_xor);
if (retval != ERROR_OK)
return retval;
- writecount = blocksize;
-
- do
- {
- nbytes = MIN((writecount << 1), 4);
- if (nbytes < 4)
- {
- retval = mem_ap_write_buf_u16(dap, buffer,
- nbytes, address);
- if (retval != ERROR_OK)
- {
- LOG_WARNING("Block write error address "
- "0x%" PRIx32 ", count 0x%x",
- address, count);
- return retval;
- }
-
- address += nbytes >> 1;
+ /* How many source bytes each transfer will consume, and their location in the DRW,
+ * depends on the type of transfer and alignment. See ARM document IHI0031C. */
+ uint32_t outvalue = 0;
+ uint32_t drw_byte_idx = address;
+ if (dap->ti_be_32_quirks) {
+ switch (this_size) {
+ case 4:
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx & 3) ^ addr_xor);
+ break;
+ case 2:
+ outvalue |= (uint32_t)*buffer++ << 8 * (1 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (1 ^ (drw_byte_idx & 3) ^ addr_xor);
+ break;
+ case 1:
+ outvalue |= (uint32_t)*buffer++ << 8 * (0 ^ (drw_byte_idx & 3) ^ addr_xor);
+ break;
}
- else
- {
- uint32_t outvalue;
- memcpy(&outvalue, buffer, sizeof(uint32_t));
-
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer + (address & 0x3)) = outvalue;
- outvalue >>= 8;
- address++;
- }
-
- memcpy(&outvalue, buffer, sizeof(uint32_t));
- retval = dap_queue_ap_write(dap,
- AP_REG_DRW, outvalue);
- if (retval != ERROR_OK)
- break;
-
- if ((retval = dap_run(dap)) != ERROR_OK)
- {
- LOG_WARNING("Block write error address "
- "0x%" PRIx32 ", count 0x%x",
- address, count);
- return retval;
- }
+ } else {
+ switch (this_size) {
+ case 4:
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx++ & 3);
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx++ & 3);
+ /* fallthrough */
+ case 2:
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx++ & 3);
+ /* fallthrough */
+ case 1:
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx & 3);
}
+ }
- buffer += nbytes >> 1;
- writecount -= nbytes >> 1;
-
- } while (writecount);
- wcount -= blocksize;
- }
-
- return retval;
-}
-
-int mem_ap_write_buf_u16(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
-{
- int retval = ERROR_OK;
-
- if (count >= 4)
- return mem_ap_write_buf_packed_u16(dap, buffer, count, address);
-
- while (count > 0)
- {
- retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
- if (retval != ERROR_OK)
- return retval;
- uint16_t svalue;
- memcpy(&svalue, buffer, sizeof(uint16_t));
- uint32_t outvalue = (uint32_t)svalue << 8 * (address & 0x3);
- retval = dap_queue_ap_write(dap, AP_REG_DRW, outvalue);
- if (retval != ERROR_OK)
- break;
+ nbytes -= this_size;
- retval = dap_run(dap);
+ retval = dap_queue_ap_write(ap, MEM_AP_REG_DRW, outvalue);
if (retval != ERROR_OK)
break;
- count -= 2;
- address += 2;
- buffer += 2;
+ mem_ap_update_tar_cache(ap);
+ if (addrinc)
+ address += this_size;
}
- return retval;
-}
-
-static int mem_ap_write_buf_packed_u8(struct adiv5_dap *dap,
- const uint8_t *buffer, int count, uint32_t address)
-{
- int retval = ERROR_OK;
- int wcount, blocksize, writecount, i;
-
- wcount = count;
-
- while (wcount > 0)
- {
- int nbytes;
-
- /* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
-
- if (wcount < blocksize)
- blocksize = wcount;
-
- retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_PACKED, address);
- if (retval != ERROR_OK)
- return retval;
- writecount = blocksize;
-
- do
- {
- nbytes = MIN(writecount, 4);
-
- if (nbytes < 4)
- {
- retval = mem_ap_write_buf_u8(dap, buffer, nbytes, address);
- if (retval != ERROR_OK)
- {
- LOG_WARNING("Block write error address "
- "0x%" PRIx32 ", count 0x%x",
- address, count);
- return retval;
- }
-
- address += nbytes;
- }
- else
- {
- uint32_t outvalue;
- memcpy(&outvalue, buffer, sizeof(uint32_t));
-
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer + (address & 0x3)) = outvalue;
- outvalue >>= 8;
- address++;
- }
-
- memcpy(&outvalue, buffer, sizeof(uint32_t));
- retval = dap_queue_ap_write(dap,
- AP_REG_DRW, outvalue);
- if (retval != ERROR_OK)
- break;
-
- if ((retval = dap_run(dap)) != ERROR_OK)
- {
- LOG_WARNING("Block write error address "
- "0x%" PRIx32 ", count 0x%x",
- address, count);
- return retval;
- }
- }
-
- buffer += nbytes;
- writecount -= nbytes;
+ /* REVISIT: Might want to have a queued version of this function that does not run. */
+ if (retval == ERROR_OK)
+ retval = dap_run(dap);
- } while (writecount);
- wcount -= blocksize;
+ if (retval != ERROR_OK) {
+ uint32_t tar;
+ if (mem_ap_read_tar(ap, &tar) == ERROR_OK)
+ LOG_ERROR("Failed to write memory at 0x%08"PRIx32, tar);
+ else
+ LOG_ERROR("Failed to write memory and, additionally, failed to find out where");
}
return retval;
}
-int mem_ap_write_buf_u8(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
+/**
+ * Synchronous read of a block of memory, using a specific access size.
+ *
+ * @param ap The MEM-AP to access.
+ * @param buffer The data buffer to receive the data. No particular alignment is assumed.
+ * @param size Which access size to use, in bytes. 1, 2 or 4.
+ * @param count The number of reads to do (in size units, not bytes).
+ * @param address Address to be read; it must be readable by the currently selected MEM-AP.
+ * @param addrinc Whether the target address should be increased after each read or not. This
+ * should normally be true, except when reading from e.g. a FIFO.
+ * @return ERROR_OK on success, otherwise an error code.
+ */
+static int mem_ap_read(struct adiv5_ap *ap, uint8_t *buffer, uint32_t size, uint32_t count,
+ uint32_t adr, bool addrinc)
{
- int retval = ERROR_OK;
+ struct adiv5_dap *dap = ap->dap;
+ size_t nbytes = size * count;
+ const uint32_t csw_addrincr = addrinc ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
+ uint32_t csw_size;
+ uint32_t address = adr;
+ int retval;
- if (count >= 4)
- return mem_ap_write_buf_packed_u8(dap, buffer, count, address);
+ /* TI BE-32 Quirks mode:
+ * Reads on big-endian TMS570 behave strangely differently than writes.
+ * They read from the physical address requested, but with DRW byte-reversed.
+ * For example, a byte read from address 0 will place the result in the high bytes of DRW.
+ * Also, packed 8-bit and 16-bit transfers seem to sometimes return garbage in some bytes,
+ * so avoid them. */
+
+ if (size == 4)
+ csw_size = CSW_32BIT;
+ else if (size == 2)
+ csw_size = CSW_16BIT;
+ else if (size == 1)
+ csw_size = CSW_8BIT;
+ else
+ return ERROR_TARGET_UNALIGNED_ACCESS;
+
+ if (ap->unaligned_access_bad && (adr % size != 0))
+ return ERROR_TARGET_UNALIGNED_ACCESS;
+
+ /* Allocate buffer to hold the sequence of DRW reads that will be made. This is a significant
+ * over-allocation if packed transfers are going to be used, but determining the real need at
+ * this point would be messy. */
+ uint32_t *read_buf = malloc(count * sizeof(uint32_t));
+ uint32_t *read_ptr = read_buf;
+ if (read_buf == NULL) {
+ LOG_ERROR("Failed to allocate read buffer");
+ return ERROR_FAIL;
+ }
- while (count > 0)
- {
- retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
- if (retval != ERROR_OK)
- return retval;
- uint32_t outvalue = (uint32_t)*buffer << 8 * (address & 0x3);
- retval = dap_queue_ap_write(dap, AP_REG_DRW, outvalue);
+ /* Queue up all reads. Each read will store the entire DRW word in the read buffer. How many
+ * useful bytes it contains, and their location in the word, depends on the type of transfer
+ * and alignment. */
+ while (nbytes > 0) {
+ uint32_t this_size = size;
+
+ /* Select packed transfer if possible */
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
+ this_size = 4;
+ retval = mem_ap_setup_csw(ap, csw_size | CSW_ADDRINC_PACKED);
+ } else {
+ retval = mem_ap_setup_csw(ap, csw_size | csw_addrincr);
+ }
if (retval != ERROR_OK)
break;
- retval = dap_run(dap);
+ retval = mem_ap_setup_tar(ap, address);
if (retval != ERROR_OK)
break;
- count--;
- address++;
- buffer++;
- }
-
- return retval;
-}
-
-/* FIXME don't import ... this is a temporary workaround for the
- * mem_ap_read_buf_u32() mess, until it's no longer JTAG-specific.
- */
-extern int adi_jtag_dp_scan(struct adiv5_dap *dap,
- uint8_t instr, uint8_t reg_addr, uint8_t RnW,
- uint8_t *outvalue, uint8_t *invalue, uint8_t *ack);
-
-/**
- * Synchronously read a block of 32-bit words into a buffer
- * @param dap The DAP connected to the MEM-AP.
- * @param buffer where the words will be stored (in host byte order).
- * @param count How many words to read.
- * @param address Memory address from which to read words; all the
- * words must be readable by the currently selected MEM-AP.
- */
-int mem_ap_read_buf_u32(struct adiv5_dap *dap, uint8_t *buffer,
- int count, uint32_t address)
-{
- int wcount, blocksize, readcount, errorcount = 0, retval = ERROR_OK;
- uint32_t adr = address;
- uint8_t* pBuffer = buffer;
-
- count >>= 2;
- wcount = count;
-
- while (wcount > 0)
- {
- /* Adjust to read blocks within boundaries aligned to the
- * TAR autoincrement size (at least 2^10). Autoincrement
- * mode avoids an extra per-word roundtrip to update TAR.
- */
- blocksize = max_tar_block_size(dap->tar_autoincr_block,
- address);
- if (wcount < blocksize)
- blocksize = wcount;
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_DRW, read_ptr++);
+ if (retval != ERROR_OK)
+ break;
- /* handle unaligned data at 4k boundary */
- if (blocksize == 0)
- blocksize = 1;
+ nbytes -= this_size;
+ if (addrinc)
+ address += this_size;
- retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_SINGLE,
- address);
- if (retval != ERROR_OK)
- return retval;
+ mem_ap_update_tar_cache(ap);
+ }
- /* FIXME remove these three calls to adi_jtag_dp_scan(),
- * so this routine becomes transport-neutral. Be careful
- * not to cause performance problems with JTAG; would it
- * suffice to loop over dap_queue_ap_read(), or would that
- * be slower when JTAG is the chosen transport?
- */
+ if (retval == ERROR_OK)
+ retval = dap_run(dap);
- /* Scan out first read */
- retval = adi_jtag_dp_scan(dap, JTAG_DP_APACC, AP_REG_DRW,
- DPAP_READ, 0, NULL, NULL);
- if (retval != ERROR_OK)
- return retval;
- for (readcount = 0; readcount < blocksize - 1; readcount++)
- {
- /* Scan out next read; scan in posted value for the
- * previous one. Assumes read is acked "OK/FAULT",
- * and CTRL_STAT says that meant "OK".
- */
- retval = adi_jtag_dp_scan(dap, JTAG_DP_APACC, AP_REG_DRW,
- DPAP_READ, 0, buffer + 4 * readcount,
- &dap->ack);
- if (retval != ERROR_OK)
- return retval;
+ /* Restore state */
+ address = adr;
+ nbytes = size * count;
+ read_ptr = read_buf;
+
+ /* If something failed, read TAR to find out how much data was successfully read, so we can
+ * at least give the caller what we have. */
+ if (retval != ERROR_OK) {
+ uint32_t tar;
+ if (mem_ap_read_tar(ap, &tar) == ERROR_OK) {
+ /* TAR is incremented after failed transfer on some devices (eg Cortex-M4) */
+ LOG_ERROR("Failed to read memory at 0x%08"PRIx32, tar);
+ if (nbytes > tar - address)
+ nbytes = tar - address;
+ } else {
+ LOG_ERROR("Failed to read memory and, additionally, failed to find out where");
+ nbytes = 0;
}
+ }
- /* Scan in last posted value; RDBUFF has no other effect,
- * assuming ack is OK/FAULT and CTRL_STAT says "OK".
- */
- retval = adi_jtag_dp_scan(dap, JTAG_DP_DPACC, DP_RDBUFF,
- DPAP_READ, 0, buffer + 4 * readcount,
- &dap->ack);
- if (retval != ERROR_OK)
- return retval;
+ /* Replay loop to populate caller's buffer from the correct word and byte lane */
+ while (nbytes > 0) {
+ uint32_t this_size = size;
- retval = dap_run(dap);
- if (retval != ERROR_OK)
- {
- errorcount++;
- if (errorcount <= 1)
- {
- /* try again */
- continue;
- }
- LOG_WARNING("Block read error address 0x%" PRIx32, address);
- return retval;
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
+ this_size = 4;
}
- wcount = wcount - blocksize;
- address += 4 * blocksize;
- buffer += 4 * blocksize;
- }
- /* if we have an unaligned access - reorder data */
- if (adr & 0x3u)
- {
- for (readcount = 0; readcount < count; readcount++)
- {
- int i;
- uint32_t data;
- memcpy(&data, pBuffer, sizeof(uint32_t));
-
- for (i = 0; i < 4; i++)
- {
- *((uint8_t*)pBuffer) =
- (data >> 8 * (adr & 0x3));
- pBuffer++;
- adr++;
+ if (dap->ti_be_32_quirks) {
+ switch (this_size) {
+ case 4:
+ *buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
+ *buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
+ /* fallthrough */
+ case 2:
+ *buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
+ /* fallthrough */
+ case 1:
+ *buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
+ }
+ } else {
+ switch (this_size) {
+ case 4:
+ *buffer++ = *read_ptr >> 8 * (address++ & 3);
+ *buffer++ = *read_ptr >> 8 * (address++ & 3);
+ /* fallthrough */
+ case 2:
+ *buffer++ = *read_ptr >> 8 * (address++ & 3);
+ /* fallthrough */
+ case 1:
+ *buffer++ = *read_ptr >> 8 * (address++ & 3);
}
}
+
+ read_ptr++;
+ nbytes -= this_size;
}
+ free(read_buf);
return retval;
}
-static int mem_ap_read_buf_packed_u16(struct adiv5_dap *dap,
- uint8_t *buffer, int count, uint32_t address)
+int mem_ap_read_buf(struct adiv5_ap *ap,
+ uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
{
- uint32_t invalue;
- int retval = ERROR_OK;
- int wcount, blocksize, readcount, i;
+ return mem_ap_read(ap, buffer, size, count, address, true);
+}
- wcount = count >> 1;
+int mem_ap_write_buf(struct adiv5_ap *ap,
+ const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
+{
+ return mem_ap_write(ap, buffer, size, count, address, true);
+}
- while (wcount > 0)
- {
- int nbytes;
+int mem_ap_read_buf_noincr(struct adiv5_ap *ap,
+ uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
+{
+ return mem_ap_read(ap, buffer, size, count, address, false);
+}
- /* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
- if (wcount < blocksize)
- blocksize = wcount;
+int mem_ap_write_buf_noincr(struct adiv5_ap *ap,
+ const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
+{
+ return mem_ap_write(ap, buffer, size, count, address, false);
+}
- retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_PACKED, address);
- if (retval != ERROR_OK)
- return retval;
+/*--------------------------------------------------------------------------*/
- /* handle unaligned data at 4k boundary */
- if (blocksize == 0)
- blocksize = 1;
- readcount = blocksize;
- do
- {
- retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
- if (retval != ERROR_OK)
- return retval;
- if ((retval = dap_run(dap)) != ERROR_OK)
- {
- LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
- return retval;
- }
+#define DAP_POWER_DOMAIN_TIMEOUT (10)
- nbytes = MIN((readcount << 1), 4);
+/* FIXME don't import ... just initialize as
+ * part of DAP transport setup
+*/
+extern const struct dap_ops jtag_dp_ops;
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
- buffer++;
- address++;
- }
+/*--------------------------------------------------------------------------*/
- readcount -= (nbytes >> 1);
- } while (readcount);
- wcount -= blocksize;
+/**
+ * Create a new DAP
+ */
+struct adiv5_dap *dap_init(void)
+{
+ struct adiv5_dap *dap = calloc(1, sizeof(struct adiv5_dap));
+ int i;
+ /* Set up with safe defaults */
+ for (i = 0; i <= 255; i++) {
+ dap->ap[i].dap = dap;
+ dap->ap[i].ap_num = i;
+ /* memaccess_tck max is 255 */
+ dap->ap[i].memaccess_tck = 255;
+ /* Number of bits for tar autoincrement, impl. dep. at least 10 */
+ dap->ap[i].tar_autoincr_block = (1<<10);
}
-
- return retval;
+ INIT_LIST_HEAD(&dap->cmd_journal);
+ return dap;
}
/**
- * Synchronously read a block of 16-bit halfwords into a buffer
- * @param dap The DAP connected to the MEM-AP.
- * @param buffer where the halfwords will be stored (in host byte order).
- * @param count How many halfwords to read.
- * @param address Memory address from which to read words; all the
- * words must be readable by the currently selected MEM-AP.
+ * Invalidate cached DP select and cached TAR and CSW of all APs
*/
-int mem_ap_read_buf_u16(struct adiv5_dap *dap, uint8_t *buffer,
- int count, uint32_t address)
+void dap_invalidate_cache(struct adiv5_dap *dap)
{
- uint32_t invalue, i;
- int retval = ERROR_OK;
-
- if (count >= 4)
- return mem_ap_read_buf_packed_u16(dap, buffer, count, address);
-
- while (count > 0)
- {
- retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
- if (retval != ERROR_OK)
- break;
-
- retval = dap_run(dap);
- if (retval != ERROR_OK)
- break;
-
- if (address & 0x1)
- {
- for (i = 0; i < 2; i++)
- {
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
- buffer++;
- address++;
- }
- }
- else
- {
- uint16_t svalue = (invalue >> 8 * (address & 0x3));
- memcpy(buffer, &svalue, sizeof(uint16_t));
- address += 2;
- buffer += 2;
- }
- count -= 2;
+ dap->select = DP_SELECT_INVALID;
+ dap->last_read = NULL;
+
+ int i;
+ for (i = 0; i <= 255; i++) {
+ /* force csw and tar write on the next mem-ap access */
+ dap->ap[i].tar_valid = false;
+ dap->ap[i].csw_value = 0;
}
-
- return retval;
}
-/* FIX!!! is this a potential performance bottleneck w.r.t. requiring too many
- * roundtrips when jtag_execute_queue() has a large overhead(e.g. for USB)s?
+/**
+ * Initialize a DAP. This sets up the power domains, prepares the DP
+ * for further use and activates overrun checking.
*
- * The solution is to arrange for a large out/in scan in this loop and
- * and convert data afterwards.
+ * @param dap The DAP being initialized.
*/
-static int mem_ap_read_buf_packed_u8(struct adiv5_dap *dap,
- uint8_t *buffer, int count, uint32_t address)
+int dap_dp_init(struct adiv5_dap *dap)
{
- uint32_t invalue;
- int retval = ERROR_OK;
- int wcount, blocksize, readcount, i;
-
- wcount = count;
-
- while (wcount > 0)
- {
- int nbytes;
-
- /* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
-
- if (wcount < blocksize)
- blocksize = wcount;
+ int retval;
- retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_PACKED, address);
- if (retval != ERROR_OK)
- return retval;
- readcount = blocksize;
-
- do
- {
- retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
- if (retval != ERROR_OK)
- return retval;
- if ((retval = dap_run(dap)) != ERROR_OK)
- {
- LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
- return retval;
- }
-
- nbytes = MIN(readcount, 4);
-
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
- buffer++;
- address++;
- }
-
- readcount -= nbytes;
- } while (readcount);
- wcount -= blocksize;
- }
-
- return retval;
-}
+ LOG_DEBUG(" ");
+ /* JTAG-DP or SWJ-DP, in JTAG mode
+ * ... for SWD mode this is patched as part
+ * of link switchover
+ * FIXME: This should already be setup by the respective transport specific DAP creation.
+ */
+ if (!dap->ops)
+ dap->ops = &jtag_dp_ops;
-/**
- * Synchronously read a block of bytes into a buffer
- * @param dap The DAP connected to the MEM-AP.
- * @param buffer where the bytes will be stored.
- * @param count How many bytes to read.
- * @param address Memory address from which to read data; all the
- * data must be readable by the currently selected MEM-AP.
- */
-int mem_ap_read_buf_u8(struct adiv5_dap *dap, uint8_t *buffer,
- int count, uint32_t address)
-{
- uint32_t invalue;
- int retval = ERROR_OK;
+ dap_invalidate_cache(dap);
- if (count >= 4)
- return mem_ap_read_buf_packed_u8(dap, buffer, count, address);
+ for (size_t i = 0; i < 30; i++) {
+ /* DP initialization */
- while (count > 0)
- {
- retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_run(dap);
- if (retval != ERROR_OK)
+ retval = dap_dp_read_atomic(dap, DP_CTRL_STAT, NULL);
+ if (retval == ERROR_OK)
break;
-
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
- count--;
- address++;
- buffer++;
}
- return retval;
-}
-
-/*--------------------------------------------------------------------*/
-/* Wrapping function with selection of AP */
-/*--------------------------------------------------------------------*/
-int mem_ap_sel_read_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t *value)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_read_u32(swjdp, address, value);
-}
-
-int mem_ap_sel_write_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t value)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_write_u32(swjdp, address, value);
-}
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, SSTICKYERR);
+ if (retval != ERROR_OK)
+ return retval;
-int mem_ap_sel_read_atomic_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t *value)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_read_atomic_u32(swjdp, address, value);
-}
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ return retval;
-int mem_ap_sel_write_atomic_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t value)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_write_atomic_u32(swjdp, address, value);
-}
+ dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
+ if (retval != ERROR_OK)
+ return retval;
-int mem_ap_sel_read_buf_u8(struct adiv5_dap *swjdp, uint8_t ap,
- uint8_t *buffer, int count, uint32_t address)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_read_buf_u8(swjdp, buffer, count, address);
-}
+ /* Check that we have debug power domains activated */
+ LOG_DEBUG("DAP: wait CDBGPWRUPACK");
+ retval = dap_dp_poll_register(dap, DP_CTRL_STAT,
+ CDBGPWRUPACK, CDBGPWRUPACK,
+ DAP_POWER_DOMAIN_TIMEOUT);
+ if (retval != ERROR_OK)
+ return retval;
-int mem_ap_sel_read_buf_u16(struct adiv5_dap *swjdp, uint8_t ap,
- uint8_t *buffer, int count, uint32_t address)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_read_buf_u16(swjdp, buffer, count, address);
-}
+ LOG_DEBUG("DAP: wait CSYSPWRUPACK");
+ retval = dap_dp_poll_register(dap, DP_CTRL_STAT,
+ CSYSPWRUPACK, CSYSPWRUPACK,
+ DAP_POWER_DOMAIN_TIMEOUT);
+ if (retval != ERROR_OK)
+ return retval;
-int mem_ap_sel_read_buf_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint8_t *buffer, int count, uint32_t address)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_read_buf_u32(swjdp, buffer, count, address);
-}
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ return retval;
-int mem_ap_sel_write_buf_u8(struct adiv5_dap *swjdp, uint8_t ap,
- const uint8_t *buffer, int count, uint32_t address)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_write_buf_u8(swjdp, buffer, count, address);
-}
+ /* With debug power on we can activate OVERRUN checking */
+ dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ return retval;
-int mem_ap_sel_write_buf_u16(struct adiv5_dap *swjdp, uint8_t ap,
- const uint8_t *buffer, int count, uint32_t address)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_write_buf_u16(swjdp, buffer, count, address);
-}
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
+ return retval;
-int mem_ap_sel_write_buf_u32(struct adiv5_dap *swjdp, uint8_t ap,
- const uint8_t *buffer, int count, uint32_t address)
-{
- dap_ap_select(swjdp, ap);
- return mem_ap_write_buf_u32(swjdp, buffer, count, address);
+ return retval;
}
-
-/*--------------------------------------------------------------------------*/
-
-
-/* FIXME don't import ... just initialize as
- * part of DAP transport setup
-*/
-extern const struct dap_ops jtag_dp_ops;
-
-/*--------------------------------------------------------------------------*/
-
/**
* Initialize a DAP. This sets up the power domains, prepares the DP
* for further use, and arranges to use AP #0 for all AP operations
* until dap_ap-select() changes that policy.
*
- * @param dap The DAP being initialized.
- *
- * @todo Rename this. We also need an initialization scheme which account
- * for SWD transports not just JTAG; that will need to address differences
- * in layering. (JTAG is useful without any debug target; but not SWD.)
- * And this may not even use an AHB-AP ... e.g. DAP-Lite uses an APB-AP.
+ * @param ap The MEM-AP being initialized.
*/
-int ahbap_debugport_init(struct adiv5_dap *dap)
+int mem_ap_init(struct adiv5_ap *ap)
{
- uint32_t ctrlstat;
- int cnt = 0;
+ /* check that we support packed transfers */
+ uint32_t csw, cfg;
int retval;
+ struct adiv5_dap *dap = ap->dap;
- LOG_DEBUG(" ");
-
- /* JTAG-DP or SWJ-DP, in JTAG mode
- * ... for SWD mode this is patched as part
- * of link switchover
- */
- if (!dap->ops)
- dap->ops = &jtag_dp_ops;
-
- /* Default MEM-AP setup.
- *
- * REVISIT AP #0 may be an inappropriate default for this.
- * Should we probe, or take a hint from the caller?
- * Presumably we can ignore the possibility of multiple APs.
- */
- dap->ap_current = !0;
- dap_ap_select(dap, 0);
-
- /* DP initialization */
-
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ ap->tar_valid = false;
+ ap->csw_value = 0; /* force csw and tar write */
+ retval = mem_ap_setup_transfer(ap, CSW_8BIT | CSW_ADDRINC_PACKED, 0);
if (retval != ERROR_OK)
return retval;
- retval = dap_queue_dp_write(dap, DP_CTRL_STAT, SSTICKYERR);
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_CSW, &csw);
if (retval != ERROR_OK)
return retval;
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_CFG, &cfg);
if (retval != ERROR_OK)
return retval;
- dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
- retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
+ retval = dap_run(dap);
if (retval != ERROR_OK)
return retval;
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &ctrlstat);
- if (retval != ERROR_OK)
- return retval;
- if ((retval = dap_run(dap)) != ERROR_OK)
- return retval;
+ if (csw & CSW_ADDRINC_PACKED)
+ ap->packed_transfers = true;
+ else
+ ap->packed_transfers = false;
- /* Check that we have debug power domains activated */
- while (!(ctrlstat & CDBGPWRUPACK) && (cnt++ < 10))
- {
- LOG_DEBUG("DAP: wait CDBGPWRUPACK");
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &ctrlstat);
- if (retval != ERROR_OK)
- return retval;
- if ((retval = dap_run(dap)) != ERROR_OK)
- return retval;
- alive_sleep(10);
- }
+ /* Packed transfers on TI BE-32 processors do not work correctly in
+ * many cases. */
+ if (dap->ti_be_32_quirks)
+ ap->packed_transfers = false;
- while (!(ctrlstat & CSYSPWRUPACK) && (cnt++ < 10))
- {
- LOG_DEBUG("DAP: wait CSYSPWRUPACK");
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &ctrlstat);
- if (retval != ERROR_OK)
- return retval;
- if ((retval = dap_run(dap)) != ERROR_OK)
- return retval;
- alive_sleep(10);
- }
+ LOG_DEBUG("MEM_AP Packed Transfers: %s",
+ ap->packed_transfers ? "enabled" : "disabled");
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
- if (retval != ERROR_OK)
- return retval;
- /* With debug power on we can activate OVERRUN checking */
- dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
- retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
- if (retval != ERROR_OK)
- return retval;
+ /* The ARM ADI spec leaves implementation-defined whether unaligned
+ * memory accesses work, only work partially, or cause a sticky error.
+ * On TI BE-32 processors, reads seem to return garbage in some bytes
+ * and unaligned writes seem to cause a sticky error.
+ * TODO: it would be nice to have a way to detect whether unaligned
+ * operations are supported on other processors. */
+ ap->unaligned_access_bad = dap->ti_be_32_quirks;
+
+ LOG_DEBUG("MEM_AP CFG: large data %d, long address %d, big-endian %d",
+ !!(cfg & 0x04), !!(cfg & 0x02), !!(cfg & 0x01));
return ERROR_OK;
}
/* CID interpretation -- see ARM IHI 0029B section 3
* and ARM IHI 0031A table 13-3.
*/
-static const char *class_description[16] ={
+static const char *class_description[16] = {
"Reserved", "ROM table", "Reserved", "Reserved",
"Reserved", "Reserved", "Reserved", "Reserved",
"Reserved", "CoreSight component", "Reserved", "Peripheral Test Block",
"Reserved", "OptimoDE DESS",
- "Generic IP component", "PrimeCell or System component"
+ "Generic IP component", "PrimeCell or System component"
};
-static bool
-is_dap_cid_ok(uint32_t cid3, uint32_t cid2, uint32_t cid1, uint32_t cid0)
+static bool is_dap_cid_ok(uint32_t cid)
{
- return cid3 == 0xb1 && cid2 == 0x05
- && ((cid1 & 0x0f) == 0) && cid0 == 0x0d;
+ return (cid & 0xffff0fff) == 0xb105000d;
}
-struct broken_cpu {
- uint32_t dbgbase;
- uint32_t apid;
- uint32_t idcode;
- uint32_t correct_dbgbase;
- char *model;
-} broken_cpus[] = {
- { 0x80000000, 0x04770002, 0x1ba00477, 0x60000000, "imx51" },
- { 0x80040000, 0x04770002, 0x3b95c02f, 0x80000000, "omap4430" },
-};
-
-int dap_get_debugbase(struct adiv5_dap *dap, int ap,
- uint32_t *out_dbgbase, uint32_t *out_apid)
+/*
+ * This function checks the ID for each access port to find the requested Access Port type
+ */
+int dap_find_ap(struct adiv5_dap *dap, enum ap_type type_to_find, struct adiv5_ap **ap_out)
{
- uint32_t ap_old;
- int retval;
- unsigned int i;
- uint32_t dbgbase, apid, idcode;
+ int ap_num;
- /* AP address is in bits 31:24 of DP_SELECT */
- if (ap >= 256)
- return ERROR_INVALID_ARGUMENTS;
+ /* Maximum AP number is 255 since the SELECT register is 8 bits */
+ for (ap_num = 0; ap_num <= 255; ap_num++) {
+
+ /* read the IDR register of the Access Port */
+ uint32_t id_val = 0;
+
+ int retval = dap_queue_ap_read(dap_ap(dap, ap_num), AP_REG_IDR, &id_val);
+ if (retval != ERROR_OK)
+ return retval;
- ap_old = dap->ap_current;
- dap_ap_select(dap, ap);
+ retval = dap_run(dap);
+
+ /* IDR bits:
+ * 31-28 : Revision
+ * 27-24 : JEDEC bank (0x4 for ARM)
+ * 23-17 : JEDEC code (0x3B for ARM)
+ * 16-13 : Class (0b1000=Mem-AP)
+ * 12-8 : Reserved
+ * 7-4 : AP Variant (non-zero for JTAG-AP)
+ * 3-0 : AP Type (0=JTAG-AP 1=AHB-AP 2=APB-AP 4=AXI-AP)
+ */
+
+ /* Reading register for a non-existant AP should not cause an error,
+ * but just to be sure, try to continue searching if an error does happen.
+ */
+ if ((retval == ERROR_OK) && /* Register read success */
+ ((id_val & IDR_JEP106) == IDR_JEP106_ARM) && /* Jedec codes match */
+ ((id_val & IDR_TYPE) == type_to_find)) { /* type matches*/
+
+ LOG_DEBUG("Found %s at AP index: %d (IDR=0x%08" PRIX32 ")",
+ (type_to_find == AP_TYPE_AHB_AP) ? "AHB-AP" :
+ (type_to_find == AP_TYPE_APB_AP) ? "APB-AP" :
+ (type_to_find == AP_TYPE_AXI_AP) ? "AXI-AP" :
+ (type_to_find == AP_TYPE_JTAG_AP) ? "JTAG-AP" : "Unknown",
+ ap_num, id_val);
+
+ *ap_out = &dap->ap[ap_num];
+ return ERROR_OK;
+ }
+ }
+
+ LOG_DEBUG("No %s found",
+ (type_to_find == AP_TYPE_AHB_AP) ? "AHB-AP" :
+ (type_to_find == AP_TYPE_APB_AP) ? "APB-AP" :
+ (type_to_find == AP_TYPE_AXI_AP) ? "AXI-AP" :
+ (type_to_find == AP_TYPE_JTAG_AP) ? "JTAG-AP" : "Unknown");
+ return ERROR_FAIL;
+}
+
+int dap_get_debugbase(struct adiv5_ap *ap,
+ uint32_t *dbgbase, uint32_t *apid)
+{
+ struct adiv5_dap *dap = ap->dap;
+ int retval;
- retval = dap_queue_ap_read(dap, AP_REG_BASE, &dbgbase);
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE, dbgbase);
if (retval != ERROR_OK)
return retval;
- retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
+ retval = dap_queue_ap_read(ap, AP_REG_IDR, apid);
if (retval != ERROR_OK)
return retval;
retval = dap_run(dap);
if (retval != ERROR_OK)
return retval;
- /* Excavate the device ID code */
- struct jtag_tap *tap = dap->jtag_info->tap;
- while (tap != NULL) {
- if (tap->hasidcode) {
- idcode = tap->idcode;
- break;
- }
- tap = tap->next_tap;
- }
- if (tap == NULL || !tap->hasidcode)
- return ERROR_OK;
-
- /* Some CPUs are messed up, so fixup if needed. */
- for (i = 0; i < sizeof(broken_cpus)/sizeof(struct broken_cpu); i++)
- if (broken_cpus[i].dbgbase == dbgbase &&
- broken_cpus[i].apid == apid &&
- broken_cpus[i].idcode == idcode) {
- LOG_WARNING("Found broken CPU (%s), trying to fixup "
- "ROM Table location from 0x%08x to 0x%08x",
- broken_cpus[i].model, dbgbase,
- broken_cpus[i].correct_dbgbase);
- dbgbase = broken_cpus[i].correct_dbgbase;
- break;
- }
-
- dap_ap_select(dap, ap_old);
-
- /* The asignment happens only here to prevent modification of these
- * values before they are certain. */
- *out_dbgbase = dbgbase;
- *out_apid = apid;
-
return ERROR_OK;
}
-int dap_lookup_cs_component(struct adiv5_dap *dap, int ap,
- uint32_t dbgbase, uint8_t type, uint32_t *addr)
+int dap_lookup_cs_component(struct adiv5_ap *ap,
+ uint32_t dbgbase, uint8_t type, uint32_t *addr, int32_t *idx)
{
- uint32_t ap_old;
uint32_t romentry, entry_offset = 0, component_base, devtype;
- int retval = ERROR_FAIL;
-
- if (ap >= 256)
- return ERROR_INVALID_ARGUMENTS;
+ int retval;
- ap_old = dap->ap_current;
- dap_ap_select(dap, ap);
+ *addr = 0;
- do
- {
- retval = mem_ap_read_atomic_u32(dap, (dbgbase&0xFFFFF000) |
+ do {
+ retval = mem_ap_read_atomic_u32(ap, (dbgbase&0xFFFFF000) |
entry_offset, &romentry);
if (retval != ERROR_OK)
return retval;
+ (romentry & 0xFFFFF000);
if (romentry & 0x1) {
- retval = mem_ap_read_atomic_u32(dap,
+ uint32_t c_cid1;
+ retval = mem_ap_read_atomic_u32(ap, component_base | 0xff4, &c_cid1);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Can't read component with base address 0x%" PRIx32
+ ", the corresponding core might be turned off", component_base);
+ return retval;
+ }
+ if (((c_cid1 >> 4) & 0x0f) == 1) {
+ retval = dap_lookup_cs_component(ap, component_base,
+ type, addr, idx);
+ if (retval == ERROR_OK)
+ break;
+ if (retval != ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
+ return retval;
+ }
+
+ retval = mem_ap_read_atomic_u32(ap,
(component_base & 0xfffff000) | 0xfcc,
&devtype);
+ if (retval != ERROR_OK)
+ return retval;
if ((devtype & 0xff) == type) {
- *addr = component_base;
- retval = ERROR_OK;
- break;
+ if (!*idx) {
+ *addr = component_base;
+ break;
+ } else
+ (*idx)--;
}
}
entry_offset += 4;
} while (romentry > 0);
- dap_ap_select(dap, ap_old);
+ if (!*addr)
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- return retval;
+ return ERROR_OK;
}
-static int dap_info_command(struct command_context *cmd_ctx,
- struct adiv5_dap *dap, int ap)
+static int dap_read_part_id(struct adiv5_ap *ap, uint32_t component_base, uint32_t *cid, uint64_t *pid)
{
+ assert((component_base & 0xFFF) == 0);
+ assert(ap != NULL && cid != NULL && pid != NULL);
+
+ uint32_t cid0, cid1, cid2, cid3;
+ uint32_t pid0, pid1, pid2, pid3, pid4;
int retval;
- uint32_t dbgbase, apid;
- int romtable_present = 0;
- uint8_t mem_ap;
- uint32_t ap_old;
- retval = dap_get_debugbase(dap, ap, &dbgbase, &apid);
+ /* IDs are in last 4K section */
+ retval = mem_ap_read_u32(ap, component_base + 0xFE0, &pid0);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + 0xFE4, &pid1);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + 0xFE8, &pid2);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + 0xFEC, &pid3);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + 0xFD0, &pid4);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + 0xFF0, &cid0);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + 0xFF4, &cid1);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + 0xFF8, &cid2);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + 0xFFC, &cid3);
if (retval != ERROR_OK)
return retval;
- ap_old = dap->ap_current;
- dap_ap_select(dap, ap);
+ retval = dap_run(ap->dap);
+ if (retval != ERROR_OK)
+ return retval;
- /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
- mem_ap = ((apid&0x10000) && ((apid&0x0F) != 0));
- command_print(cmd_ctx, "AP ID register 0x%8.8" PRIx32, apid);
- if (apid)
- {
- switch (apid&0x0F)
- {
- case 0:
- command_print(cmd_ctx, "\tType is JTAG-AP");
- break;
- case 1:
- command_print(cmd_ctx, "\tType is MEM-AP AHB");
- break;
- case 2:
- command_print(cmd_ctx, "\tType is MEM-AP APB");
- break;
- default:
- command_print(cmd_ctx, "\tUnknown AP type");
- break;
- }
+ *cid = (cid3 & 0xff) << 24
+ | (cid2 & 0xff) << 16
+ | (cid1 & 0xff) << 8
+ | (cid0 & 0xff);
+ *pid = (uint64_t)(pid4 & 0xff) << 32
+ | (pid3 & 0xff) << 24
+ | (pid2 & 0xff) << 16
+ | (pid1 & 0xff) << 8
+ | (pid0 & 0xff);
- /* NOTE: a MEM-AP may have a single CoreSight component that's
- * not a ROM table ... or have no such components at all.
- */
- if (mem_ap)
- command_print(cmd_ctx, "AP BASE 0x%8.8" PRIx32,
- dbgbase);
+ return ERROR_OK;
+}
+
+/* The designer identity code is encoded as:
+ * bits 11:8 : JEP106 Bank (number of continuation codes), only valid when bit 7 is 1.
+ * bit 7 : Set when bits 6:0 represent a JEP106 ID and cleared when bits 6:0 represent
+ * a legacy ASCII Identity Code.
+ * bits 6:0 : JEP106 Identity Code (without parity) or legacy ASCII code according to bit 7.
+ * JEP106 is a standard available from jedec.org
+ */
+
+/* Part number interpretations are from Cortex
+ * core specs, the CoreSight components TRM
+ * (ARM DDI 0314H), CoreSight System Design
+ * Guide (ARM DGI 0012D) and ETM specs; also
+ * from chip observation (e.g. TI SDTI).
+ */
+
+/* The legacy code only used the part number field to identify CoreSight peripherals.
+ * This meant that the same part number from two different manufacturers looked the same.
+ * It is desirable for all future additions to identify with both part number and JEP106.
+ * "ANY_ID" is a wildcard (any JEP106) only to preserve legacy behavior for legacy entries.
+ */
+
+#define ANY_ID 0x1000
+
+#define ARM_ID 0x4BB
+
+static const struct {
+ uint16_t designer_id;
+ uint16_t part_num;
+ const char *type;
+ const char *full;
+} dap_partnums[] = {
+ { ARM_ID, 0x000, "Cortex-M3 SCS", "(System Control Space)", },
+ { ARM_ID, 0x001, "Cortex-M3 ITM", "(Instrumentation Trace Module)", },
+ { ARM_ID, 0x002, "Cortex-M3 DWT", "(Data Watchpoint and Trace)", },
+ { ARM_ID, 0x003, "Cortex-M3 FPB", "(Flash Patch and Breakpoint)", },
+ { ARM_ID, 0x008, "Cortex-M0 SCS", "(System Control Space)", },
+ { ARM_ID, 0x00a, "Cortex-M0 DWT", "(Data Watchpoint and Trace)", },
+ { ARM_ID, 0x00b, "Cortex-M0 BPU", "(Breakpoint Unit)", },
+ { ARM_ID, 0x00c, "Cortex-M4 SCS", "(System Control Space)", },
+ { ARM_ID, 0x00d, "CoreSight ETM11", "(Embedded Trace)", },
+ { ARM_ID, 0x00e, "Cortex-M7 FPB", "(Flash Patch and Breakpoint)", },
+ { ARM_ID, 0x490, "Cortex-A15 GIC", "(Generic Interrupt Controller)", },
+ { ARM_ID, 0x4a1, "Cortex-A53 ROM", "(v8 Memory Map ROM Table)", },
+ { ARM_ID, 0x4a2, "Cortex-A57 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4a3, "Cortex-A53 ROM", "(v7 Memory Map ROM Table)", },
+ { ARM_ID, 0x4a4, "Cortex-A72 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4af, "Cortex-A15 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c0, "Cortex-M0+ ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c3, "Cortex-M3 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c4, "Cortex-M4 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c7, "Cortex-M7 PPB ROM", "(Private Peripheral Bus ROM Table)", },
+ { ARM_ID, 0x4c8, "Cortex-M7 ROM", "(ROM Table)", },
+ { ARM_ID, 0x470, "Cortex-M1 ROM", "(ROM Table)", },
+ { ARM_ID, 0x471, "Cortex-M0 ROM", "(ROM Table)", },
+ { ARM_ID, 0x906, "CoreSight CTI", "(Cross Trigger)", },
+ { ARM_ID, 0x907, "CoreSight ETB", "(Trace Buffer)", },
+ { ARM_ID, 0x908, "CoreSight CSTF", "(Trace Funnel)", },
+ { ARM_ID, 0x909, "CoreSight ATBR", "(Advanced Trace Bus Replicator)", },
+ { ARM_ID, 0x910, "CoreSight ETM9", "(Embedded Trace)", },
+ { ARM_ID, 0x912, "CoreSight TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x913, "CoreSight ITM", "(Instrumentation Trace Macrocell)", },
+ { ARM_ID, 0x914, "CoreSight SWO", "(Single Wire Output)", },
+ { ARM_ID, 0x917, "CoreSight HTM", "(AHB Trace Macrocell)", },
+ { ARM_ID, 0x920, "CoreSight ETM11", "(Embedded Trace)", },
+ { ARM_ID, 0x921, "Cortex-A8 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x922, "Cortex-A8 CTI", "(Cross Trigger)", },
+ { ARM_ID, 0x923, "Cortex-M3 TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x924, "Cortex-M3 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x925, "Cortex-M4 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x930, "Cortex-R4 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x931, "Cortex-R5 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x932, "CoreSight MTB-M0+", "(Micro Trace Buffer)", },
+ { ARM_ID, 0x941, "CoreSight TPIU-Lite", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x950, "Cortex-A9 PTM", "(Program Trace Macrocell)", },
+ { ARM_ID, 0x955, "Cortex-A5 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95a, "Cortex-A72 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95b, "Cortex-A17 PTM", "(Program Trace Macrocell)", },
+ { ARM_ID, 0x95d, "Cortex-A53 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95e, "Cortex-A57 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95f, "Cortex-A15 PTM", "(Program Trace Macrocell)", },
+ { ARM_ID, 0x961, "CoreSight TMC", "(Trace Memory Controller)", },
+ { ARM_ID, 0x962, "CoreSight STM", "(System Trace Macrocell)", },
+ { ARM_ID, 0x975, "Cortex-M7 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x9a0, "CoreSight PMU", "(Performance Monitoring Unit)", },
+ { ARM_ID, 0x9a1, "Cortex-M4 TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x9a4, "CoreSight GPR", "(Granular Power Requester)", },
+ { ARM_ID, 0x9a5, "Cortex-A5 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9a7, "Cortex-A7 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9a8, "Cortex-A53 CTI", "(Cross Trigger)", },
+ { ARM_ID, 0x9a9, "Cortex-M7 TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x9ae, "Cortex-A17 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9af, "Cortex-A15 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9b7, "Cortex-R7 PMU", "(Performance Monitoring Unit)", },
+ { ARM_ID, 0x9d3, "Cortex-A53 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9d7, "Cortex-A57 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9d8, "Cortex-A72 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0xc05, "Cortex-A5 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc07, "Cortex-A7 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc08, "Cortex-A8 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc09, "Cortex-A9 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc0e, "Cortex-A17 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc0f, "Cortex-A15 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc14, "Cortex-R4 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc15, "Cortex-R5 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc17, "Cortex-R7 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd03, "Cortex-A53 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd07, "Cortex-A57 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd08, "Cortex-A72 Debug", "(Debug Unit)", },
+ { 0x097, 0x9af, "MSP432 ROM", "(ROM Table)" },
+ { 0x09f, 0xcd0, "Atmel CPU with DSU", "(CPU)" },
+ { 0x0c1, 0x1db, "XMC4500 ROM", "(ROM Table)" },
+ { 0x0c1, 0x1df, "XMC4700/4800 ROM", "(ROM Table)" },
+ { 0x0c1, 0x1ed, "XMC1000 ROM", "(ROM Table)" },
+ { 0x0E5, 0x000, "SHARC+/Blackfin+", "", },
+ { 0x0F0, 0x440, "Qualcomm QDSS Component v1", "(Qualcomm Designed CoreSight Component v1)", },
+ /* legacy comment: 0x113: what? */
+ { ANY_ID, 0x120, "TI SDTI", "(System Debug Trace Interface)", }, /* from OMAP3 memmap */
+ { ANY_ID, 0x343, "TI DAPCTL", "", }, /* from OMAP3 memmap */
+};
+
+static int dap_rom_display(struct command_context *cmd_ctx,
+ struct adiv5_ap *ap, uint32_t dbgbase, int depth)
+{
+ int retval;
+ uint64_t pid;
+ uint32_t cid;
+ char tabs[16] = "";
+
+ if (depth > 16) {
+ command_print(cmd_ctx, "\tTables too deep");
+ return ERROR_FAIL;
}
- else
- {
- command_print(cmd_ctx, "No AP found at this ap 0x%x", ap);
+
+ if (depth)
+ snprintf(tabs, sizeof(tabs), "[L%02d] ", depth);
+
+ uint32_t base_addr = dbgbase & 0xFFFFF000;
+ command_print(cmd_ctx, "\t\tComponent base address 0x%08" PRIx32, base_addr);
+
+ retval = dap_read_part_id(ap, base_addr, &cid, &pid);
+ if (retval != ERROR_OK) {
+ command_print(cmd_ctx, "\t\tCan't read component, the corresponding core might be turned off");
+ return ERROR_OK; /* Don't abort recursion */
}
- romtable_present = ((mem_ap) && (dbgbase != 0xFFFFFFFF));
- if (romtable_present)
- {
- uint32_t cid0,cid1,cid2,cid3,memtype,romentry;
- uint16_t entry_offset;
+ if (!is_dap_cid_ok(cid)) {
+ command_print(cmd_ctx, "\t\tInvalid CID 0x%08" PRIx32, cid);
+ return ERROR_OK; /* Don't abort recursion */
+ }
- /* bit 16 of apid indicates a memory access port */
- if (dbgbase & 0x02)
- command_print(cmd_ctx, "\tValid ROM table present");
- else
- command_print(cmd_ctx, "\tROM table in legacy format");
+ /* component may take multiple 4K pages */
+ uint32_t size = (pid >> 36) & 0xf;
+ if (size > 0)
+ command_print(cmd_ctx, "\t\tStart address 0x%08" PRIx32, (uint32_t)(base_addr - 0x1000 * size));
+
+ command_print(cmd_ctx, "\t\tPeripheral ID 0x%010" PRIx64, pid);
+
+ uint8_t class = (cid >> 12) & 0xf;
+ uint16_t part_num = pid & 0xfff;
+ uint16_t designer_id = ((pid >> 32) & 0xf) << 8 | ((pid >> 12) & 0xff);
+
+ if (designer_id & 0x80) {
+ /* JEP106 code */
+ command_print(cmd_ctx, "\t\tDesigner is 0x%03" PRIx16 ", %s",
+ designer_id, jep106_manufacturer(designer_id >> 8, designer_id & 0x7f));
+ } else {
+ /* Legacy ASCII ID, clear invalid bits */
+ designer_id &= 0x7f;
+ command_print(cmd_ctx, "\t\tDesigner ASCII code 0x%02" PRIx16 ", %s",
+ designer_id, designer_id == 0x41 ? "ARM" : "<unknown>");
+ }
- /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF0, &cid0);
- if (retval != ERROR_OK)
- return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF4, &cid1);
- if (retval != ERROR_OK)
- return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF8, &cid2);
- if (retval != ERROR_OK)
- return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFFC, &cid3);
- if (retval != ERROR_OK)
- return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFCC, &memtype);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_run(dap);
+ /* default values to be overwritten upon finding a match */
+ const char *type = "Unrecognized";
+ const char *full = "";
+
+ /* search dap_partnums[] array for a match */
+ for (unsigned entry = 0; entry < ARRAY_SIZE(dap_partnums); entry++) {
+
+ if ((dap_partnums[entry].designer_id != designer_id) && (dap_partnums[entry].designer_id != ANY_ID))
+ continue;
+
+ if (dap_partnums[entry].part_num != part_num)
+ continue;
+
+ type = dap_partnums[entry].type;
+ full = dap_partnums[entry].full;
+ break;
+ }
+
+ command_print(cmd_ctx, "\t\tPart is 0x%" PRIx16", %s %s", part_num, type, full);
+ command_print(cmd_ctx, "\t\tComponent class is 0x%" PRIx8 ", %s", class, class_description[class]);
+
+ if (class == 1) { /* ROM Table */
+ uint32_t memtype;
+ retval = mem_ap_read_atomic_u32(ap, base_addr | 0xFCC, &memtype);
if (retval != ERROR_OK)
return retval;
- if (!is_dap_cid_ok(cid3, cid2, cid1, cid0))
- command_print(cmd_ctx, "\tCID3 0x%2.2x"
- ", CID2 0x%2.2x"
- ", CID1 0x%2.2x"
- ", CID0 0x%2.2x",
- (unsigned) cid3, (unsigned)cid2,
- (unsigned) cid1, (unsigned) cid0);
if (memtype & 0x01)
- command_print(cmd_ctx, "\tMEMTYPE system memory present on bus");
+ command_print(cmd_ctx, "\t\tMEMTYPE system memory present on bus");
else
- command_print(cmd_ctx, "\tMEMTYPE System memory not present. "
- "Dedicated debug bus.");
-
- /* Now we read ROM table entries from dbgbase&0xFFFFF000) | 0x000 until we get 0x00000000 */
- entry_offset = 0;
- do
- {
- retval = mem_ap_read_atomic_u32(dap, (dbgbase&0xFFFFF000) | entry_offset, &romentry);
+ command_print(cmd_ctx, "\t\tMEMTYPE system memory not present: dedicated debug bus");
+
+ /* Read ROM table entries from base address until we get 0x00000000 or reach the reserved area */
+ for (uint16_t entry_offset = 0; entry_offset < 0xF00; entry_offset += 4) {
+ uint32_t romentry;
+ retval = mem_ap_read_atomic_u32(ap, base_addr | entry_offset, &romentry);
if (retval != ERROR_OK)
return retval;
- command_print(cmd_ctx, "\tROMTABLE[0x%x] = 0x%" PRIx32 "",entry_offset,romentry);
- if (romentry&0x01)
- {
- uint32_t c_cid0, c_cid1, c_cid2, c_cid3;
- uint32_t c_pid0, c_pid1, c_pid2, c_pid3, c_pid4;
- uint32_t component_base;
- unsigned part_num;
- char *type, *full;
-
- component_base = (dbgbase & 0xFFFFF000)
- + (romentry & 0xFFFFF000);
-
- /* IDs are in last 4K section */
-
-
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFE0, &c_pid0);
- if (retval != ERROR_OK)
- return retval;
- c_pid0 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFE4, &c_pid1);
- if (retval != ERROR_OK)
- return retval;
- c_pid1 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFE8, &c_pid2);
- if (retval != ERROR_OK)
- return retval;
- c_pid2 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFEC, &c_pid3);
- if (retval != ERROR_OK)
- return retval;
- c_pid3 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFD0, &c_pid4);
+ command_print(cmd_ctx, "\t%sROMTABLE[0x%x] = 0x%" PRIx32 "",
+ tabs, entry_offset, romentry);
+ if (romentry & 0x01) {
+ /* Recurse */
+ retval = dap_rom_display(cmd_ctx, ap, base_addr + (romentry & 0xFFFFF000), depth + 1);
if (retval != ERROR_OK)
return retval;
- c_pid4 &= 0xff;
+ } else if (romentry != 0) {
+ command_print(cmd_ctx, "\t\tComponent not present");
+ } else {
+ command_print(cmd_ctx, "\t%s\tEnd of ROM table", tabs);
+ break;
+ }
+ }
+ } else if (class == 9) { /* CoreSight component */
+ const char *major = "Reserved", *subtype = "Reserved";
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFF0, &c_cid0);
- if (retval != ERROR_OK)
- return retval;
- c_cid0 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFF4, &c_cid1);
- if (retval != ERROR_OK)
- return retval;
- c_cid1 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFF8, &c_cid2);
- if (retval != ERROR_OK)
- return retval;
- c_cid2 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFFC, &c_cid3);
- if (retval != ERROR_OK)
- return retval;
- c_cid3 &= 0xff;
-
-
- command_print(cmd_ctx,
- "\t\tComponent base address 0x%" PRIx32
- ", start address 0x%" PRIx32,
- component_base,
- /* component may take multiple 4K pages */
- component_base - 0x1000*(c_pid4 >> 4));
- command_print(cmd_ctx, "\t\tComponent class is 0x%x, %s",
- (int) (c_cid1 >> 4) & 0xf,
- /* See ARM IHI 0029B Table 3-3 */
- class_description[(c_cid1 >> 4) & 0xf]);
-
- /* CoreSight component? */
- if (((c_cid1 >> 4) & 0x0f) == 9) {
- uint32_t devtype;
- unsigned minor;
- char *major = "Reserved", *subtype = "Reserved";
-
- retval = mem_ap_read_atomic_u32(dap,
- (component_base & 0xfffff000) | 0xfcc,
- &devtype);
- if (retval != ERROR_OK)
- return retval;
- minor = (devtype >> 4) & 0x0f;
- switch (devtype & 0x0f) {
- case 0:
- major = "Miscellaneous";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 4:
- subtype = "Validation component";
- break;
- }
- break;
- case 1:
- major = "Trace Sink";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Port";
- break;
- case 2:
- subtype = "Buffer";
- break;
- }
- break;
- case 2:
- major = "Trace Link";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Funnel, router";
- break;
- case 2:
- subtype = "Filter";
- break;
- case 3:
- subtype = "FIFO, buffer";
- break;
- }
- break;
- case 3:
- major = "Trace Source";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Processor";
- break;
- case 2:
- subtype = "DSP";
- break;
- case 3:
- subtype = "Engine/Coprocessor";
- break;
- case 4:
- subtype = "Bus";
- break;
- }
- break;
- case 4:
- major = "Debug Control";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Trigger Matrix";
- break;
- case 2:
- subtype = "Debug Auth";
- break;
- }
- break;
- case 5:
- major = "Debug Logic";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Processor";
- break;
- case 2:
- subtype = "DSP";
- break;
- case 3:
- subtype = "Engine/Coprocessor";
- break;
- }
- break;
- }
- command_print(cmd_ctx, "\t\tType is 0x%2.2x, %s, %s",
- (unsigned) (devtype & 0xff),
- major, subtype);
- /* REVISIT also show 0xfc8 DevId */
- }
-
- if (!is_dap_cid_ok(cid3, cid2, cid1, cid0))
- command_print(cmd_ctx,
- "\t\tCID3 0%2.2x"
- ", CID2 0%2.2x"
- ", CID1 0%2.2x"
- ", CID0 0%2.2x",
- (int) c_cid3,
- (int) c_cid2,
- (int)c_cid1,
- (int)c_cid0);
- command_print(cmd_ctx,
- "\t\tPeripheral ID[4..0] = hex "
- "%2.2x %2.2x %2.2x %2.2x %2.2x",
- (int) c_pid4, (int) c_pid3, (int) c_pid2,
- (int) c_pid1, (int) c_pid0);
-
- /* Part number interpretations are from Cortex
- * core specs, the CoreSight components TRM
- * (ARM DDI 0314H), CoreSight System Design
- * Guide (ARM DGI 0012D) and ETM specs; also
- * from chip observation (e.g. TI SDTI).
- */
- part_num = (c_pid0 & 0xff);
- part_num |= (c_pid1 & 0x0f) << 8;
- switch (part_num) {
- case 0x000:
- type = "Cortex-M3 NVIC";
- full = "(Interrupt Controller)";
- break;
- case 0x001:
- type = "Cortex-M3 ITM";
- full = "(Instrumentation Trace Module)";
- break;
- case 0x002:
- type = "Cortex-M3 DWT";
- full = "(Data Watchpoint and Trace)";
- break;
- case 0x003:
- type = "Cortex-M3 FBP";
- full = "(Flash Patch and Breakpoint)";
- break;
- case 0x00d:
- type = "CoreSight ETM11";
- full = "(Embedded Trace)";
- break;
- // case 0x113: what?
- case 0x120: /* from OMAP3 memmap */
- type = "TI SDTI";
- full = "(System Debug Trace Interface)";
- break;
- case 0x343: /* from OMAP3 memmap */
- type = "TI DAPCTL";
- full = "";
- break;
- case 0x906:
- type = "Coresight CTI";
- full = "(Cross Trigger)";
- break;
- case 0x907:
- type = "Coresight ETB";
- full = "(Trace Buffer)";
- break;
- case 0x908:
- type = "Coresight CSTF";
- full = "(Trace Funnel)";
- break;
- case 0x910:
- type = "CoreSight ETM9";
- full = "(Embedded Trace)";
- break;
- case 0x912:
- type = "Coresight TPIU";
- full = "(Trace Port Interface Unit)";
- break;
- case 0x921:
- type = "Cortex-A8 ETM";
- full = "(Embedded Trace)";
- break;
- case 0x922:
- type = "Cortex-A8 CTI";
- full = "(Cross Trigger)";
- break;
- case 0x923:
- type = "Cortex-M3 TPIU";
- full = "(Trace Port Interface Unit)";
- break;
- case 0x924:
- type = "Cortex-M3 ETM";
- full = "(Embedded Trace)";
- break;
- case 0x930:
- type = "Cortex-R4 ETM";
- full = "(Embedded Trace)";
- break;
- case 0xc08:
- type = "Cortex-A8 Debug";
- full = "(Debug Unit)";
- break;
- default:
- type = "-*- unrecognized -*-";
- full = "";
- break;
- }
- command_print(cmd_ctx, "\t\tPart is %s %s",
- type, full);
+ uint32_t devtype;
+ retval = mem_ap_read_atomic_u32(ap, base_addr | 0xFCC, &devtype);
+ if (retval != ERROR_OK)
+ return retval;
+ unsigned minor = (devtype >> 4) & 0x0f;
+ switch (devtype & 0x0f) {
+ case 0:
+ major = "Miscellaneous";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 4:
+ subtype = "Validation component";
+ break;
}
- else
- {
- if (romentry)
- command_print(cmd_ctx, "\t\tComponent not present");
- else
- command_print(cmd_ctx, "\t\tEnd of ROM table");
+ break;
+ case 1:
+ major = "Trace Sink";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Port";
+ break;
+ case 2:
+ subtype = "Buffer";
+ break;
+ case 3:
+ subtype = "Router";
+ break;
+ }
+ break;
+ case 2:
+ major = "Trace Link";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Funnel, router";
+ break;
+ case 2:
+ subtype = "Filter";
+ break;
+ case 3:
+ subtype = "FIFO, buffer";
+ break;
+ }
+ break;
+ case 3:
+ major = "Trace Source";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Processor";
+ break;
+ case 2:
+ subtype = "DSP";
+ break;
+ case 3:
+ subtype = "Engine/Coprocessor";
+ break;
+ case 4:
+ subtype = "Bus";
+ break;
+ case 6:
+ subtype = "Software";
+ break;
+ }
+ break;
+ case 4:
+ major = "Debug Control";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Trigger Matrix";
+ break;
+ case 2:
+ subtype = "Debug Auth";
+ break;
+ case 3:
+ subtype = "Power Requestor";
+ break;
+ }
+ break;
+ case 5:
+ major = "Debug Logic";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Processor";
+ break;
+ case 2:
+ subtype = "DSP";
+ break;
+ case 3:
+ subtype = "Engine/Coprocessor";
+ break;
+ case 4:
+ subtype = "Bus";
+ break;
+ case 5:
+ subtype = "Memory";
+ break;
+ }
+ break;
+ case 6:
+ major = "Perfomance Monitor";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Processor";
+ break;
+ case 2:
+ subtype = "DSP";
+ break;
+ case 3:
+ subtype = "Engine/Coprocessor";
+ break;
+ case 4:
+ subtype = "Bus";
+ break;
+ case 5:
+ subtype = "Memory";
+ break;
}
- entry_offset += 4;
- } while (romentry > 0);
+ break;
+ }
+ command_print(cmd_ctx, "\t\tType is 0x%02" PRIx8 ", %s, %s",
+ (uint8_t)(devtype & 0xff),
+ major, subtype);
+ /* REVISIT also show 0xfc8 DevId */
}
- else
- {
- command_print(cmd_ctx, "\tNo ROM table present");
+
+ return ERROR_OK;
+}
+
+static int dap_info_command(struct command_context *cmd_ctx,
+ struct adiv5_ap *ap)
+{
+ int retval;
+ uint32_t dbgbase, apid;
+ uint8_t mem_ap;
+
+ /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
+ retval = dap_get_debugbase(ap, &dbgbase, &apid);
+ if (retval != ERROR_OK)
+ return retval;
+
+ command_print(cmd_ctx, "AP ID register 0x%8.8" PRIx32, apid);
+ if (apid == 0) {
+ command_print(cmd_ctx, "No AP found at this ap 0x%x", ap->ap_num);
+ return ERROR_FAIL;
+ }
+
+ switch (apid & (IDR_JEP106 | IDR_TYPE)) {
+ case IDR_JEP106_ARM | AP_TYPE_JTAG_AP:
+ command_print(cmd_ctx, "\tType is JTAG-AP");
+ break;
+ case IDR_JEP106_ARM | AP_TYPE_AHB_AP:
+ command_print(cmd_ctx, "\tType is MEM-AP AHB");
+ break;
+ case IDR_JEP106_ARM | AP_TYPE_APB_AP:
+ command_print(cmd_ctx, "\tType is MEM-AP APB");
+ break;
+ case IDR_JEP106_ARM | AP_TYPE_AXI_AP:
+ command_print(cmd_ctx, "\tType is MEM-AP AXI");
+ break;
+ default:
+ command_print(cmd_ctx, "\tUnknown AP type");
+ break;
+ }
+
+ /* NOTE: a MEM-AP may have a single CoreSight component that's
+ * not a ROM table ... or have no such components at all.
+ */
+ mem_ap = (apid & IDR_CLASS) == AP_CLASS_MEM_AP;
+ if (mem_ap) {
+ command_print(cmd_ctx, "MEM-AP BASE 0x%8.8" PRIx32, dbgbase);
+
+ if (dbgbase == 0xFFFFFFFF || (dbgbase & 0x3) == 0x2) {
+ command_print(cmd_ctx, "\tNo ROM table present");
+ } else {
+ if (dbgbase & 0x01)
+ command_print(cmd_ctx, "\tValid ROM table present");
+ else
+ command_print(cmd_ctx, "\tROM table in legacy format");
+
+ dap_rom_display(cmd_ctx, ap, dbgbase & 0xFFFFF000, 0);
+ }
}
- dap_ap_select(dap, ap_old);
return ERROR_OK;
}
+int adiv5_jim_configure(struct target *target, Jim_GetOptInfo *goi)
+{
+ struct adiv5_private_config *pc;
+ const char *arg;
+ jim_wide ap_num;
+ int e;
+
+ /* check if argv[0] is for us */
+ arg = Jim_GetString(goi->argv[0], NULL);
+ if (strcmp(arg, "-ap-num"))
+ return JIM_CONTINUE;
+
+ e = Jim_GetOpt_String(goi, &arg, NULL);
+ if (e != JIM_OK)
+ return e;
+
+ if (goi->argc == 0) {
+ Jim_WrongNumArgs(goi->interp, goi->argc, goi->argv, "-ap-num ?ap-number? ...");
+ return JIM_ERR;
+ }
+
+ e = Jim_GetOpt_Wide(goi, &ap_num);
+ if (e != JIM_OK)
+ return e;
+
+ if (target->private_config == NULL) {
+ pc = calloc(1, sizeof(struct adiv5_private_config));
+ target->private_config = pc;
+ pc->ap_num = ap_num;
+ }
+
+
+ return JIM_OK;
+}
+
COMMAND_HANDLER(handle_dap_info_command)
{
struct target *target = get_current_target(CMD_CTX);
break;
case 1:
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
+ if (apsel >= 256)
+ return ERROR_COMMAND_SYNTAX_ERROR;
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- return dap_info_command(CMD_CTX, dap, apsel);
+ return dap_info_command(CMD_CTX, &dap->ap[apsel]);
}
COMMAND_HANDLER(dap_baseaddr_command)
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
/* AP address is in bits 31:24 of DP_SELECT */
if (apsel >= 256)
- return ERROR_INVALID_ARGUMENTS;
+ return ERROR_COMMAND_SYNTAX_ERROR;
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- dap_ap_select(dap, apsel);
-
/* NOTE: assumes we're talking to a MEM-AP, which
* has a base address. There are other kinds of AP,
* though they're not common for now. This should
* use the ID register to verify it's a MEM-AP.
*/
- retval = dap_queue_ap_read(dap, AP_REG_BASE, &baseaddr);
+ retval = dap_queue_ap_read(dap_ap(dap, apsel), MEM_AP_REG_BASE, &baseaddr);
if (retval != ERROR_OK)
return retval;
retval = dap_run(dap);
switch (CMD_ARGC) {
case 0:
- memaccess_tck = dap->memaccess_tck;
+ memaccess_tck = dap->ap[dap->apsel].memaccess_tck;
break;
case 1:
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], memaccess_tck);
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- dap->memaccess_tck = memaccess_tck;
+ dap->ap[dap->apsel].memaccess_tck = memaccess_tck;
command_print(CMD_CTX, "memory bus access delay set to %" PRIi32 " tck",
- dap->memaccess_tck);
+ dap->ap[dap->apsel].memaccess_tck);
return ERROR_OK;
}
switch (CMD_ARGC) {
case 0:
- apsel = 0;
+ apsel = dap->apsel;
break;
case 1:
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
/* AP address is in bits 31:24 of DP_SELECT */
if (apsel >= 256)
- return ERROR_INVALID_ARGUMENTS;
+ return ERROR_COMMAND_SYNTAX_ERROR;
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
dap->apsel = apsel;
- dap_ap_select(dap, apsel);
- retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
+ retval = dap_queue_ap_read(dap_ap(dap, apsel), AP_REG_IDR, &apid);
if (retval != ERROR_OK)
return retval;
retval = dap_run(dap);
return retval;
}
+COMMAND_HANDLER(dap_apcsw_command)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ struct arm *arm = target_to_arm(target);
+ struct adiv5_dap *dap = arm->dap;
+
+ uint32_t apcsw = dap->ap[dap->apsel].csw_default, sprot = 0;
+
+ switch (CMD_ARGC) {
+ case 0:
+ command_print(CMD_CTX, "apsel %" PRIi32 " selected, csw 0x%8.8" PRIx32,
+ (dap->apsel), apcsw);
+ break;
+ case 1:
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], sprot);
+ /* AP address is in bits 31:24 of DP_SELECT */
+ if (sprot > 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ if (sprot)
+ apcsw |= CSW_SPROT;
+ else
+ apcsw &= ~CSW_SPROT;
+ break;
+ default:
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+ dap->ap[dap->apsel].csw_default = apcsw;
+
+ return 0;
+}
+
+
+
COMMAND_HANDLER(dap_apid_command)
{
struct target *target = get_current_target(CMD_CTX);
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
/* AP address is in bits 31:24 of DP_SELECT */
if (apsel >= 256)
- return ERROR_INVALID_ARGUMENTS;
+ return ERROR_COMMAND_SYNTAX_ERROR;
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- dap_ap_select(dap, apsel);
-
- retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
+ retval = dap_queue_ap_read(dap_ap(dap, apsel), AP_REG_IDR, &apid);
if (retval != ERROR_OK)
return retval;
retval = dap_run(dap);
return retval;
}
+COMMAND_HANDLER(dap_apreg_command)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ struct arm *arm = target_to_arm(target);
+ struct adiv5_dap *dap = arm->dap;
+
+ uint32_t apsel, reg, value;
+ int retval;
+
+ if (CMD_ARGC < 2 || CMD_ARGC > 3)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
+ /* AP address is in bits 31:24 of DP_SELECT */
+ if (apsel >= 256)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], reg);
+ if (reg >= 256 || (reg & 3))
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ if (CMD_ARGC == 3) {
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], value);
+ retval = dap_queue_ap_write(dap_ap(dap, apsel), reg, value);
+ } else {
+ retval = dap_queue_ap_read(dap_ap(dap, apsel), reg, &value);
+ }
+ if (retval == ERROR_OK)
+ retval = dap_run(dap);
+
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (CMD_ARGC == 2)
+ command_print(CMD_CTX, "0x%08" PRIx32, value);
+
+ return retval;
+}
+
+COMMAND_HANDLER(dap_ti_be_32_quirks_command)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ struct arm *arm = target_to_arm(target);
+ struct adiv5_dap *dap = arm->dap;
+
+ uint32_t enable = dap->ti_be_32_quirks;
+
+ switch (CMD_ARGC) {
+ case 0:
+ break;
+ case 1:
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], enable);
+ if (enable > 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ break;
+ default:
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+ dap->ti_be_32_quirks = enable;
+ command_print(CMD_CTX, "TI BE-32 quirks mode %s",
+ enable ? "enabled" : "disabled");
+
+ return 0;
+}
+
static const struct command_registration dap_commands[] = {
{
.name = "info",
"and display the result",
.usage = "[ap_num]",
},
+ {
+ .name = "apcsw",
+ .handler = dap_apcsw_command,
+ .mode = COMMAND_EXEC,
+ .help = "Set csw access bit ",
+ .usage = "[sprot]",
+ },
+
{
.name = "apid",
.handler = dap_apid_command,
"(default currently selected AP)",
.usage = "[ap_num]",
},
+ {
+ .name = "apreg",
+ .handler = dap_apreg_command,
+ .mode = COMMAND_EXEC,
+ .help = "read/write a register from AP "
+ "(reg is byte address of a word register, like 0 4 8...)",
+ .usage = "ap_num reg [value]",
+ },
{
.name = "baseaddr",
.handler = dap_baseaddr_command,
"bus access [0-255]",
.usage = "[cycles]",
},
+ {
+ .name = "ti_be_32_quirks",
+ .handler = dap_ti_be_32_quirks_command,
+ .mode = COMMAND_CONFIG,
+ .help = "set/get quirks mode for TI TMS450/TMS570 processors",
+ .usage = "[enable]",
+ },
COMMAND_REGISTRATION_DONE
};
.name = "dap",
.mode = COMMAND_EXEC,
.help = "DAP command group",
+ .usage = "",
.chain = dap_commands,
},
COMMAND_REGISTRATION_DONE
};
-
-
Code Review / openocd.git / blobdiff