#include "config.h"
#endif
+#include "jtag/interface.h"
#include "arm.h"
#include "arm_adi_v5.h"
#include <helper/time_support.h>
-
/* ARM ADI Specification requires at least 10 bits used for TAR autoincrement */
/*
* @param apsel Number of the AP to (implicitly) use with further
* transactions. This normally identifies a MEM-AP.
*/
-void dap_ap_select(struct adiv5_dap *dap,uint8_t apsel)
+void dap_ap_select(struct adiv5_dap *dap, uint8_t ap)
{
- uint32_t select_apsel = (apsel << 24) & 0xFF000000;
+ uint32_t new_ap = (ap << 24) & 0xFF000000;
- if (select_apsel != dap->apsel)
- {
- dap->apsel = select_apsel;
+ if (new_ap != dap->ap_current) {
+ dap->ap_current = new_ap;
/* Switching AP invalidates cached values.
* Values MUST BE UPDATED BEFORE AP ACCESS.
*/
int retval;
csw = csw | CSW_DBGSWENABLE | CSW_MASTER_DEBUG | CSW_HPROT;
- if (csw != dap->ap_csw_value)
- {
+ if (csw != dap->ap_csw_value) {
/* LOG_DEBUG("DAP: Set CSW %x",csw); */
retval = dap_queue_ap_write(dap, AP_REG_CSW, csw);
if (retval != ERROR_OK)
return retval;
dap->ap_csw_value = csw;
}
- if (tar != dap->ap_tar_value)
- {
+ if (tar != dap->ap_tar_value) {
/* LOG_DEBUG("DAP: Set TAR %x",tar); */
retval = dap_queue_ap_write(dap, AP_REG_TAR, tar);
if (retval != ERROR_OK)
* Write a buffer in target order (little endian) *
* *
*****************************************************************************/
-int mem_ap_write_buf_u32(struct adiv5_dap *dap, uint8_t *buffer, int count, uint32_t address)
+int mem_ap_write_buf_u32(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
{
int wcount, blocksize, writecount, errorcount = 0, retval = ERROR_OK;
uint32_t adr = address;
- uint8_t* pBuffer = buffer;
+ const uint8_t *pBuffer = buffer;
count >>= 2;
wcount = count;
/* if we have an unaligned access - reorder data */
- if (adr & 0x3u)
- {
- for (writecount = 0; writecount < count; writecount++)
- {
+ if (adr & 0x3u) {
+ for (writecount = 0; writecount < count; writecount++) {
int i;
uint32_t outvalue;
memcpy(&outvalue, pBuffer, sizeof(uint32_t));
- for (i = 0; i < 4; i++)
- {
- *((uint8_t*)pBuffer + (adr & 0x3)) = outvalue;
+ for (i = 0; i < 4; i++) {
+ *((uint8_t *)pBuffer + (adr & 0x3)) = outvalue;
outvalue >>= 8;
adr++;
}
}
}
- while (wcount > 0)
- {
+ while (wcount > 0) {
/* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
if (wcount < blocksize)
if (retval != ERROR_OK)
return retval;
- for (writecount = 0; writecount < blocksize; writecount++)
- {
+ for (writecount = 0; writecount < blocksize; writecount++) {
retval = dap_queue_ap_write(dap, AP_REG_DRW,
- *(uint32_t *) (buffer + 4 * writecount));
+ *(uint32_t *) ((void *) (buffer + 4 * writecount)));
if (retval != ERROR_OK)
break;
}
- if (dap_run(dap) == ERROR_OK)
- {
+ retval = dap_run(dap);
+ if (retval == ERROR_OK) {
wcount = wcount - blocksize;
address = address + 4 * blocksize;
buffer = buffer + 4 * blocksize;
- }
- else
- {
+ } else
errorcount++;
- }
- if (errorcount > 1)
- {
+ if (errorcount > 1) {
LOG_WARNING("Block write error address 0x%" PRIx32 ", wcount 0x%x", address, wcount);
- /* REVISIT return the *actual* fault code */
- return ERROR_JTAG_DEVICE_ERROR;
+ return retval;
}
}
}
static int mem_ap_write_buf_packed_u16(struct adiv5_dap *dap,
- uint8_t *buffer, int count, uint32_t address)
+ const uint8_t *buffer, int count, uint32_t address)
{
int retval = ERROR_OK;
int wcount, blocksize, writecount, i;
wcount = count >> 1;
- while (wcount > 0)
- {
+ while (wcount > 0) {
int nbytes;
/* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
return retval;
writecount = blocksize;
- do
- {
+ do {
nbytes = MIN((writecount << 1), 4);
- if (nbytes < 4)
- {
- if (mem_ap_write_buf_u16(dap, buffer,
- nbytes, address) != ERROR_OK)
- {
+ if (nbytes < 4) {
+ retval = mem_ap_write_buf_u16(dap, buffer,
+ nbytes, address);
+ if (retval != ERROR_OK) {
LOG_WARNING("Block write error address "
"0x%" PRIx32 ", count 0x%x",
address, count);
- return ERROR_JTAG_DEVICE_ERROR;
+ return retval;
}
address += nbytes >> 1;
- }
- else
- {
+ } else {
uint32_t outvalue;
memcpy(&outvalue, buffer, sizeof(uint32_t));
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer + (address & 0x3)) = outvalue;
+ for (i = 0; i < nbytes; i++) {
+ *((uint8_t *)buffer + (address & 0x3)) = outvalue;
outvalue >>= 8;
address++;
}
if (retval != ERROR_OK)
break;
- if (dap_run(dap) != ERROR_OK)
- {
+ retval = dap_run(dap);
+ if (retval != ERROR_OK) {
LOG_WARNING("Block write error address "
"0x%" PRIx32 ", count 0x%x",
address, count);
- /* REVISIT return *actual* fault code */
- return ERROR_JTAG_DEVICE_ERROR;
+ return retval;
}
}
return retval;
}
-int mem_ap_write_buf_u16(struct adiv5_dap *dap, uint8_t *buffer, int count, uint32_t address)
+int mem_ap_write_buf_u16(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
{
int retval = ERROR_OK;
if (count >= 4)
return mem_ap_write_buf_packed_u16(dap, buffer, count, address);
- while (count > 0)
- {
+ while (count > 0) {
retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
if (retval != ERROR_OK)
return retval;
}
static int mem_ap_write_buf_packed_u8(struct adiv5_dap *dap,
- uint8_t *buffer, int count, uint32_t address)
+ const uint8_t *buffer, int count, uint32_t address)
{
int retval = ERROR_OK;
int wcount, blocksize, writecount, i;
wcount = count;
- while (wcount > 0)
- {
+ while (wcount > 0) {
int nbytes;
/* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
return retval;
writecount = blocksize;
- do
- {
+ do {
nbytes = MIN(writecount, 4);
- if (nbytes < 4)
- {
- if (mem_ap_write_buf_u8(dap, buffer, nbytes, address) != ERROR_OK)
- {
+ if (nbytes < 4) {
+ retval = mem_ap_write_buf_u8(dap, buffer, nbytes, address);
+ if (retval != ERROR_OK) {
LOG_WARNING("Block write error address "
"0x%" PRIx32 ", count 0x%x",
address, count);
- return ERROR_JTAG_DEVICE_ERROR;
+ return retval;
}
address += nbytes;
- }
- else
- {
+ } else {
uint32_t outvalue;
memcpy(&outvalue, buffer, sizeof(uint32_t));
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer + (address & 0x3)) = outvalue;
+ for (i = 0; i < nbytes; i++) {
+ *((uint8_t *)buffer + (address & 0x3)) = outvalue;
outvalue >>= 8;
address++;
}
if (retval != ERROR_OK)
break;
- if (dap_run(dap) != ERROR_OK)
- {
+ retval = dap_run(dap);
+ if (retval != ERROR_OK) {
LOG_WARNING("Block write error address "
"0x%" PRIx32 ", count 0x%x",
address, count);
- /* REVISIT return *actual* fault code */
- return ERROR_JTAG_DEVICE_ERROR;
+ return retval;
}
}
return retval;
}
-int mem_ap_write_buf_u8(struct adiv5_dap *dap, uint8_t *buffer, int count, uint32_t address)
+int mem_ap_write_buf_u8(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
{
int retval = ERROR_OK;
if (count >= 4)
return mem_ap_write_buf_packed_u8(dap, buffer, count, address);
- while (count > 0)
- {
+ while (count > 0) {
retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
if (retval != ERROR_OK)
return retval;
{
int wcount, blocksize, readcount, errorcount = 0, retval = ERROR_OK;
uint32_t adr = address;
- uint8_t* pBuffer = buffer;
+ uint8_t *pBuffer = buffer;
count >>= 2;
wcount = count;
- while (wcount > 0)
- {
+ while (wcount > 0) {
/* Adjust to read blocks within boundaries aligned to the
* TAR autoincrement size (at least 2^10). Autoincrement
* mode avoids an extra per-word roundtrip to update TAR.
DPAP_READ, 0, NULL, NULL);
if (retval != ERROR_OK)
return retval;
- for (readcount = 0; readcount < blocksize - 1; readcount++)
- {
+ for (readcount = 0; readcount < blocksize - 1; readcount++) {
/* Scan out next read; scan in posted value for the
* previous one. Assumes read is acked "OK/FAULT",
* and CTRL_STAT says that meant "OK".
return retval;
retval = dap_run(dap);
- if (retval != ERROR_OK)
- {
+ if (retval != ERROR_OK) {
errorcount++;
- if (errorcount <= 1)
- {
+ if (errorcount <= 1) {
/* try again */
continue;
}
}
/* if we have an unaligned access - reorder data */
- if (adr & 0x3u)
- {
- for (readcount = 0; readcount < count; readcount++)
- {
+ if (adr & 0x3u) {
+ for (readcount = 0; readcount < count; readcount++) {
int i;
uint32_t data;
memcpy(&data, pBuffer, sizeof(uint32_t));
- for (i = 0; i < 4; i++)
- {
- *((uint8_t*)pBuffer) =
+ for (i = 0; i < 4; i++) {
+ *((uint8_t *)pBuffer) =
(data >> 8 * (adr & 0x3));
pBuffer++;
adr++;
wcount = count >> 1;
- while (wcount > 0)
- {
+ while (wcount > 0) {
int nbytes;
/* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
blocksize = 1;
readcount = blocksize;
- do
- {
+ do {
retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
- if (dap_run(dap) != ERROR_OK)
- {
+ if (retval != ERROR_OK)
+ return retval;
+ retval = dap_run(dap);
+ if (retval != ERROR_OK) {
LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
- /* REVISIT return the *actual* fault code */
- return ERROR_JTAG_DEVICE_ERROR;
+ return retval;
}
nbytes = MIN((readcount << 1), 4);
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
+ for (i = 0; i < nbytes; i++) {
+ *((uint8_t *)buffer) = (invalue >> 8 * (address & 0x3));
buffer++;
address++;
}
if (count >= 4)
return mem_ap_read_buf_packed_u16(dap, buffer, count, address);
- while (count > 0)
- {
+ while (count > 0) {
retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
if (retval != ERROR_OK)
return retval;
if (retval != ERROR_OK)
break;
- if (address & 0x1)
- {
- for (i = 0; i < 2; i++)
- {
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
+ if (address & 0x1) {
+ for (i = 0; i < 2; i++) {
+ *((uint8_t *)buffer) = (invalue >> 8 * (address & 0x3));
buffer++;
address++;
}
- }
- else
- {
+ } else {
uint16_t svalue = (invalue >> 8 * (address & 0x3));
memcpy(buffer, &svalue, sizeof(uint16_t));
address += 2;
wcount = count;
- while (wcount > 0)
- {
+ while (wcount > 0) {
int nbytes;
/* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
return retval;
readcount = blocksize;
- do
- {
+ do {
retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
- if (dap_run(dap) != ERROR_OK)
- {
+ if (retval != ERROR_OK)
+ return retval;
+ retval = dap_run(dap);
+ if (retval != ERROR_OK) {
LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
- /* REVISIT return the *actual* fault code */
- return ERROR_JTAG_DEVICE_ERROR;
+ return retval;
}
nbytes = MIN(readcount, 4);
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
+ for (i = 0; i < nbytes; i++) {
+ *((uint8_t *)buffer) = (invalue >> 8 * (address & 0x3));
buffer++;
address++;
}
if (count >= 4)
return mem_ap_read_buf_packed_u8(dap, buffer, count, address);
- while (count > 0)
- {
+ while (count > 0) {
retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
if (retval != ERROR_OK)
return retval;
if (retval != ERROR_OK)
break;
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
+ *((uint8_t *)buffer) = (invalue >> 8 * (address & 0x3));
count--;
address++;
buffer++;
return retval;
}
+/*--------------------------------------------------------------------*/
+/* Wrapping function with selection of AP */
+/*--------------------------------------------------------------------*/
+int mem_ap_sel_read_u32(struct adiv5_dap *swjdp, uint8_t ap,
+ uint32_t address, uint32_t *value)
+{
+ dap_ap_select(swjdp, ap);
+ return mem_ap_read_u32(swjdp, address, value);
+}
+
+int mem_ap_sel_write_u32(struct adiv5_dap *swjdp, uint8_t ap,
+ uint32_t address, uint32_t value)
+{
+ dap_ap_select(swjdp, ap);
+ return mem_ap_write_u32(swjdp, address, value);
+}
+
+int mem_ap_sel_read_atomic_u32(struct adiv5_dap *swjdp, uint8_t ap,
+ uint32_t address, uint32_t *value)
+{
+ dap_ap_select(swjdp, ap);
+ return mem_ap_read_atomic_u32(swjdp, address, value);
+}
+
+int mem_ap_sel_write_atomic_u32(struct adiv5_dap *swjdp, uint8_t ap,
+ uint32_t address, uint32_t value)
+{
+ dap_ap_select(swjdp, ap);
+ return mem_ap_write_atomic_u32(swjdp, address, value);
+}
+
+int mem_ap_sel_read_buf_u8(struct adiv5_dap *swjdp, uint8_t ap,
+ uint8_t *buffer, int count, uint32_t address)
+{
+ dap_ap_select(swjdp, ap);
+ return mem_ap_read_buf_u8(swjdp, buffer, count, address);
+}
+
+int mem_ap_sel_read_buf_u16(struct adiv5_dap *swjdp, uint8_t ap,
+ uint8_t *buffer, int count, uint32_t address)
+{
+ dap_ap_select(swjdp, ap);
+ return mem_ap_read_buf_u16(swjdp, buffer, count, address);
+}
+
+int mem_ap_sel_read_buf_u32(struct adiv5_dap *swjdp, uint8_t ap,
+ uint8_t *buffer, int count, uint32_t address)
+{
+ dap_ap_select(swjdp, ap);
+ return mem_ap_read_buf_u32(swjdp, buffer, count, address);
+}
+
+int mem_ap_sel_write_buf_u8(struct adiv5_dap *swjdp, uint8_t ap,
+ const uint8_t *buffer, int count, uint32_t address)
+{
+ dap_ap_select(swjdp, ap);
+ return mem_ap_write_buf_u8(swjdp, buffer, count, address);
+}
+
+int mem_ap_sel_write_buf_u16(struct adiv5_dap *swjdp, uint8_t ap,
+ const uint8_t *buffer, int count, uint32_t address)
+{
+ dap_ap_select(swjdp, ap);
+ return mem_ap_write_buf_u16(swjdp, buffer, count, address);
+}
+
+int mem_ap_sel_write_buf_u32(struct adiv5_dap *swjdp, uint8_t ap,
+ const uint8_t *buffer, int count, uint32_t address)
+{
+ dap_ap_select(swjdp, ap);
+ return mem_ap_write_buf_u32(swjdp, buffer, count, address);
+}
+
+#define MDM_REG_STAT 0x00
+#define MDM_REG_CTRL 0x04
+#define MDM_REG_ID 0xfc
+
+#define MDM_STAT_FMEACK (1<<0)
+#define MDM_STAT_FREADY (1<<1)
+#define MDM_STAT_SYSSEC (1<<2)
+#define MDM_STAT_SYSRES (1<<3)
+#define MDM_STAT_FMEEN (1<<5)
+#define MDM_STAT_BACKDOOREN (1<<6)
+#define MDM_STAT_LPEN (1<<7)
+#define MDM_STAT_VLPEN (1<<8)
+#define MDM_STAT_LLSMODEXIT (1<<9)
+#define MDM_STAT_VLLSXMODEXIT (1<<10)
+#define MDM_STAT_CORE_HALTED (1<<16)
+#define MDM_STAT_CORE_SLEEPDEEP (1<<17)
+#define MDM_STAT_CORESLEEPING (1<<18)
+
+#define MEM_CTRL_FMEIP (1<<0)
+#define MEM_CTRL_DBG_DIS (1<<1)
+#define MEM_CTRL_DBG_REQ (1<<2)
+#define MEM_CTRL_SYS_RES_REQ (1<<3)
+#define MEM_CTRL_CORE_HOLD_RES (1<<4)
+#define MEM_CTRL_VLLSX_DBG_REQ (1<<5)
+#define MEM_CTRL_VLLSX_DBG_ACK (1<<6)
+#define MEM_CTRL_VLLSX_STAT_ACK (1<<7)
+
+/**
+ *
+ */
+int dap_syssec_kinetis_mdmap(struct adiv5_dap *dap)
+{
+ uint32_t val;
+ int retval;
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
+
+ dap_ap_select(dap, 1);
+
+ /* first check mdm-ap id register */
+ retval = dap_queue_ap_read(dap, MDM_REG_ID, &val);
+ if (retval != ERROR_OK)
+ return retval;
+ dap_run(dap);
+
+ if (val != 0x001C0000) {
+ LOG_DEBUG("id doesn't match %08X != 0x001C0000", val);
+ dap_ap_select(dap, 0);
+ return ERROR_FAIL;
+ }
+
+ /* read and parse status register
+ * it's important that the device is out of
+ * reset here
+ */
+ retval = dap_queue_ap_read(dap, MDM_REG_STAT, &val);
+ if (retval != ERROR_OK)
+ return retval;
+ dap_run(dap);
+
+ LOG_DEBUG("MDM_REG_STAT %08X", val);
+
+ if ((val & (MDM_STAT_SYSSEC|MDM_STAT_FREADY)) != (MDM_STAT_FREADY)) {
+ LOG_DEBUG("MDMAP: system is secured, masserase needed");
+
+ if (!(val & MDM_STAT_FMEEN))
+ LOG_DEBUG("MDMAP: masserase is disabled");
+ else {
+ /* we need to assert reset */
+ if (jtag_reset_config & RESET_HAS_SRST) {
+ /* default to asserting srst */
+ adapter_assert_reset();
+ } else {
+ LOG_DEBUG("SRST not configured");
+ dap_ap_select(dap, 0);
+ return ERROR_FAIL;
+ }
+
+ while (1) {
+ retval = dap_queue_ap_write(dap, MDM_REG_CTRL, MEM_CTRL_FMEIP);
+ if (retval != ERROR_OK)
+ return retval;
+ dap_run(dap);
+ /* read status register and wait for ready */
+ retval = dap_queue_ap_read(dap, MDM_REG_STAT, &val);
+ if (retval != ERROR_OK)
+ return retval;
+ dap_run(dap);
+ LOG_DEBUG("MDM_REG_STAT %08X", val);
+
+ if ((val & 1))
+ break;
+ }
+
+ while (1) {
+ retval = dap_queue_ap_write(dap, MDM_REG_CTRL, 0);
+ if (retval != ERROR_OK)
+ return retval;
+ dap_run(dap);
+ /* read status register */
+ retval = dap_queue_ap_read(dap, MDM_REG_STAT, &val);
+ if (retval != ERROR_OK)
+ return retval;
+ dap_run(dap);
+ LOG_DEBUG("MDM_REG_STAT %08X", val);
+ /* read control register and wait for ready */
+ retval = dap_queue_ap_read(dap, MDM_REG_CTRL, &val);
+ if (retval != ERROR_OK)
+ return retval;
+ dap_run(dap);
+ LOG_DEBUG("MDM_REG_CTRL %08X", val);
+
+ if (val == 0x00)
+ break;
+ }
+ }
+ }
+
+ dap_ap_select(dap, 0);
+
+ return ERROR_OK;
+}
+
+/** */
+struct dap_syssec_filter {
+ /** */
+ uint32_t idcode;
+ /** */
+ int (*dap_init)(struct adiv5_dap *dap);
+};
+
+/** */
+static struct dap_syssec_filter dap_syssec_filter_data[] = {
+ { 0x4BA00477, dap_syssec_kinetis_mdmap }
+};
+
+/**
+ *
+ */
+int dap_syssec(struct adiv5_dap *dap)
+{
+ unsigned int i;
+ struct jtag_tap *tap;
+
+ for (i = 0; i < sizeof(dap_syssec_filter_data); i++) {
+ tap = dap->jtag_info->tap;
+
+ while (tap != NULL) {
+ if (tap->hasidcode && (dap_syssec_filter_data[i].idcode == tap->idcode)) {
+ LOG_DEBUG("DAP: mdmap_init for idcode: %08x", tap->idcode);
+ dap_syssec_filter_data[i].dap_init(dap);
+ }
+ tap = tap->next_tap;
+ }
+ }
+
+ return ERROR_OK;
+}
+
/*--------------------------------------------------------------------------*/
*/
int ahbap_debugport_init(struct adiv5_dap *dap)
{
- uint32_t idreg, romaddr, dummy;
uint32_t ctrlstat;
int cnt = 0;
int retval;
LOG_DEBUG(" ");
- /* JTAG-DP or SWJ-DP, in JTAG mode */
- dap->ops = &jtag_dp_ops;
+ /* test for initialized low level jtag hardware
+ * this always fails for stlink hardware
+ */
+ if (!dap->jtag_info) {
+ LOG_DEBUG("No low level jtag hardware found");
+ return ERROR_OK;
+ }
+
+ /* JTAG-DP or SWJ-DP, in JTAG mode
+ * ... for SWD mode this is patched as part
+ * of link switchover
+ */
+ if (!dap->ops)
+ dap->ops = &jtag_dp_ops;
/* Default MEM-AP setup.
*
* Should we probe, or take a hint from the caller?
* Presumably we can ignore the possibility of multiple APs.
*/
- dap->apsel = !0;
+ dap->ap_current = !0;
dap_ap_select(dap, 0);
/* DP initialization */
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &dummy);
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
if (retval != ERROR_OK)
return retval;
if (retval != ERROR_OK)
return retval;
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &dummy);
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
if (retval != ERROR_OK)
return retval;
retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &ctrlstat);
if (retval != ERROR_OK)
return retval;
- if ((retval = dap_run(dap)) != ERROR_OK)
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
return retval;
/* Check that we have debug power domains activated */
- while (!(ctrlstat & CDBGPWRUPACK) && (cnt++ < 10))
- {
+ while (!(ctrlstat & CDBGPWRUPACK) && (cnt++ < 10)) {
LOG_DEBUG("DAP: wait CDBGPWRUPACK");
retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &ctrlstat);
if (retval != ERROR_OK)
return retval;
- if ((retval = dap_run(dap)) != ERROR_OK)
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
return retval;
alive_sleep(10);
}
- while (!(ctrlstat & CSYSPWRUPACK) && (cnt++ < 10))
- {
+ while (!(ctrlstat & CSYSPWRUPACK) && (cnt++ < 10)) {
LOG_DEBUG("DAP: wait CSYSPWRUPACK");
retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &ctrlstat);
if (retval != ERROR_OK)
return retval;
- if ((retval = dap_run(dap)) != ERROR_OK)
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
return retval;
alive_sleep(10);
}
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &dummy);
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
if (retval != ERROR_OK)
return retval;
/* With debug power on we can activate OVERRUN checking */
retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
if (retval != ERROR_OK)
return retval;
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &dummy);
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
if (retval != ERROR_OK)
return retval;
- /*
- * REVISIT this isn't actually *initializing* anything in an AP,
- * and doesn't care if it's a MEM-AP at all (much less AHB-AP).
- * Should it? If the ROM address is valid, is this the right
- * place to scan the table and do any topology detection?
- */
- retval = dap_queue_ap_read(dap, AP_REG_IDR, &idreg);
- retval = dap_queue_ap_read(dap, AP_REG_BASE, &romaddr);
-
- if ((retval = dap_run(dap)) != ERROR_OK)
- return retval;
-
- LOG_DEBUG("MEM-AP #%" PRId32 " ID Register 0x%" PRIx32
- ", Debug ROM Address 0x%" PRIx32,
- dap->apsel, idreg, romaddr);
+ dap_syssec(dap);
return ERROR_OK;
}
/* CID interpretation -- see ARM IHI 0029B section 3
* and ARM IHI 0031A table 13-3.
*/
-static const char *class_description[16] ={
+static const char *class_description[16] = {
"Reserved", "ROM table", "Reserved", "Reserved",
"Reserved", "Reserved", "Reserved", "Reserved",
"Reserved", "CoreSight component", "Reserved", "Peripheral Test Block",
"Reserved", "OptimoDE DESS",
- "Generic IP component", "PrimeCell or System component"
+ "Generic IP component", "PrimeCell or System component"
};
-static bool
-is_dap_cid_ok(uint32_t cid3, uint32_t cid2, uint32_t cid1, uint32_t cid0)
+static bool is_dap_cid_ok(uint32_t cid3, uint32_t cid2, uint32_t cid1, uint32_t cid0)
{
return cid3 == 0xb1 && cid2 == 0x05
&& ((cid1 & 0x0f) == 0) && cid0 == 0x0d;
}
-static int dap_info_command(struct command_context *cmd_ctx,
- struct adiv5_dap *dap, int apsel)
+int dap_get_debugbase(struct adiv5_dap *dap, int ap,
+ uint32_t *out_dbgbase, uint32_t *out_apid)
{
+ uint32_t ap_old;
int retval;
uint32_t dbgbase, apid;
- int romtable_present = 0;
- uint8_t mem_ap;
- uint32_t apselold;
/* AP address is in bits 31:24 of DP_SELECT */
- if (apsel >= 256)
- return ERROR_INVALID_ARGUMENTS;
+ if (ap >= 256)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ ap_old = dap->ap_current;
+ dap_ap_select(dap, ap);
- apselold = dap->apsel;
- dap_ap_select(dap, apsel);
retval = dap_queue_ap_read(dap, AP_REG_BASE, &dbgbase);
+ if (retval != ERROR_OK)
+ return retval;
retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
+ if (retval != ERROR_OK)
+ return retval;
retval = dap_run(dap);
if (retval != ERROR_OK)
return retval;
+ /* Excavate the device ID code */
+ struct jtag_tap *tap = dap->jtag_info->tap;
+ while (tap != NULL) {
+ if (tap->hasidcode)
+ break;
+ tap = tap->next_tap;
+ }
+ if (tap == NULL || !tap->hasidcode)
+ return ERROR_OK;
+
+ dap_ap_select(dap, ap_old);
+
+ /* The asignment happens only here to prevent modification of these
+ * values before they are certain. */
+ *out_dbgbase = dbgbase;
+ *out_apid = apid;
+
+ return ERROR_OK;
+}
+
+int dap_lookup_cs_component(struct adiv5_dap *dap, int ap,
+ uint32_t dbgbase, uint8_t type, uint32_t *addr)
+{
+ uint32_t ap_old;
+ uint32_t romentry, entry_offset = 0, component_base, devtype;
+ int retval = ERROR_FAIL;
+
+ if (ap >= 256)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ ap_old = dap->ap_current;
+ dap_ap_select(dap, ap);
+
+ do {
+ retval = mem_ap_read_atomic_u32(dap, (dbgbase&0xFFFFF000) |
+ entry_offset, &romentry);
+ if (retval != ERROR_OK)
+ return retval;
+
+ component_base = (dbgbase & 0xFFFFF000)
+ + (romentry & 0xFFFFF000);
+
+ if (romentry & 0x1) {
+ retval = mem_ap_read_atomic_u32(dap,
+ (component_base & 0xfffff000) | 0xfcc,
+ &devtype);
+ if ((devtype & 0xff) == type) {
+ *addr = component_base;
+ retval = ERROR_OK;
+ break;
+ }
+ }
+ entry_offset += 4;
+ } while (romentry > 0);
+
+ dap_ap_select(dap, ap_old);
+
+ return retval;
+}
+
+static int dap_info_command(struct command_context *cmd_ctx,
+ struct adiv5_dap *dap, int ap)
+{
+ int retval;
+ uint32_t dbgbase = 0, apid = 0; /* Silence gcc by initializing */
+ int romtable_present = 0;
+ uint8_t mem_ap;
+ uint32_t ap_old;
+
+ retval = dap_get_debugbase(dap, ap, &dbgbase, &apid);
+ if (retval != ERROR_OK)
+ return retval;
+
+ ap_old = dap->ap_current;
+ dap_ap_select(dap, ap);
+
/* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
mem_ap = ((apid&0x10000) && ((apid&0x0F) != 0));
command_print(cmd_ctx, "AP ID register 0x%8.8" PRIx32, apid);
- if (apid)
- {
- switch (apid&0x0F)
- {
+ if (apid) {
+ switch (apid&0x0F) {
case 0:
command_print(cmd_ctx, "\tType is JTAG-AP");
break;
* not a ROM table ... or have no such components at all.
*/
if (mem_ap)
- command_print(cmd_ctx, "AP BASE 0x%8.8" PRIx32,
- dbgbase);
- }
- else
- {
- command_print(cmd_ctx, "No AP found at this apsel 0x%x", apsel);
- }
+ command_print(cmd_ctx, "AP BASE 0x%8.8" PRIx32, dbgbase);
+ } else
+ command_print(cmd_ctx, "No AP found at this ap 0x%x", ap);
romtable_present = ((mem_ap) && (dbgbase != 0xFFFFFFFF));
- if (romtable_present)
- {
- uint32_t cid0,cid1,cid2,cid3,memtype,romentry;
+ if (romtable_present) {
+ uint32_t cid0, cid1, cid2, cid3, memtype, romentry;
uint16_t entry_offset;
/* bit 16 of apid indicates a memory access port */
/* Now we read ROM table entries from dbgbase&0xFFFFF000) | 0x000 until we get 0x00000000 */
entry_offset = 0;
- do
- {
- mem_ap_read_atomic_u32(dap, (dbgbase&0xFFFFF000) | entry_offset, &romentry);
- command_print(cmd_ctx, "\tROMTABLE[0x%x] = 0x%" PRIx32 "",entry_offset,romentry);
- if (romentry&0x01)
- {
+ do {
+ retval = mem_ap_read_atomic_u32(dap, (dbgbase&0xFFFFF000) | entry_offset, &romentry);
+ if (retval != ERROR_OK)
+ return retval;
+ command_print(cmd_ctx, "\tROMTABLE[0x%x] = 0x%" PRIx32 "", entry_offset, romentry);
+ if (romentry & 0x01) {
uint32_t c_cid0, c_cid1, c_cid2, c_cid3;
uint32_t c_pid0, c_pid1, c_pid2, c_pid3, c_pid4;
uint32_t component_base;
unsigned part_num;
char *type, *full;
- component_base = (dbgbase & 0xFFFFF000)
- + (romentry & 0xFFFFF000);
+ component_base = (dbgbase & 0xFFFFF000) + (romentry & 0xFFFFF000);
/* IDs are in last 4K section */
-
-
- mem_ap_read_atomic_u32(dap,
- component_base + 0xFE0, &c_pid0);
+ retval = mem_ap_read_atomic_u32(dap, component_base + 0xFE0, &c_pid0);
+ if (retval != ERROR_OK)
+ return retval;
c_pid0 &= 0xff;
- mem_ap_read_atomic_u32(dap,
- component_base + 0xFE4, &c_pid1);
+ retval = mem_ap_read_atomic_u32(dap, component_base + 0xFE4, &c_pid1);
+ if (retval != ERROR_OK)
+ return retval;
c_pid1 &= 0xff;
- mem_ap_read_atomic_u32(dap,
- component_base + 0xFE8, &c_pid2);
+ retval = mem_ap_read_atomic_u32(dap, component_base + 0xFE8, &c_pid2);
+ if (retval != ERROR_OK)
+ return retval;
c_pid2 &= 0xff;
- mem_ap_read_atomic_u32(dap,
- component_base + 0xFEC, &c_pid3);
+ retval = mem_ap_read_atomic_u32(dap, component_base + 0xFEC, &c_pid3);
+ if (retval != ERROR_OK)
+ return retval;
c_pid3 &= 0xff;
- mem_ap_read_atomic_u32(dap,
- component_base + 0xFD0, &c_pid4);
+ retval = mem_ap_read_atomic_u32(dap, component_base + 0xFD0, &c_pid4);
+ if (retval != ERROR_OK)
+ return retval;
c_pid4 &= 0xff;
- mem_ap_read_atomic_u32(dap,
- component_base + 0xFF0, &c_cid0);
+ retval = mem_ap_read_atomic_u32(dap, component_base + 0xFF0, &c_cid0);
+ if (retval != ERROR_OK)
+ return retval;
c_cid0 &= 0xff;
- mem_ap_read_atomic_u32(dap,
- component_base + 0xFF4, &c_cid1);
+ retval = mem_ap_read_atomic_u32(dap, component_base + 0xFF4, &c_cid1);
+ if (retval != ERROR_OK)
+ return retval;
c_cid1 &= 0xff;
- mem_ap_read_atomic_u32(dap,
- component_base + 0xFF8, &c_cid2);
+ retval = mem_ap_read_atomic_u32(dap, component_base + 0xFF8, &c_cid2);
+ if (retval != ERROR_OK)
+ return retval;
c_cid2 &= 0xff;
- mem_ap_read_atomic_u32(dap,
- component_base + 0xFFC, &c_cid3);
+ retval = mem_ap_read_atomic_u32(dap, component_base + 0xFFC, &c_cid3);
+ if (retval != ERROR_OK)
+ return retval;
c_cid3 &= 0xff;
-
- command_print(cmd_ctx,
- "\t\tComponent base address 0x%" PRIx32
- ", start address 0x%" PRIx32,
- component_base,
+ command_print(cmd_ctx, "\t\tComponent base address 0x%" PRIx32 ","
+ "start address 0x%" PRIx32, component_base,
/* component may take multiple 4K pages */
component_base - 0x1000*(c_pid4 >> 4));
command_print(cmd_ctx, "\t\tComponent class is 0x%x, %s",
unsigned minor;
char *major = "Reserved", *subtype = "Reserved";
- mem_ap_read_atomic_u32(dap,
+ retval = mem_ap_read_atomic_u32(dap,
(component_base & 0xfffff000) | 0xfcc,
&devtype);
+ if (retval != ERROR_OK)
+ return retval;
minor = (devtype >> 4) & 0x0f;
switch (devtype & 0x0f) {
case 0:
if (!is_dap_cid_ok(cid3, cid2, cid1, cid0))
command_print(cmd_ctx,
- "\t\tCID3 0%2.2x"
+ "\t\tCID3 0%2.2x"
", CID2 0%2.2x"
", CID1 0%2.2x"
", CID0 0%2.2x",
/* Part number interpretations are from Cortex
* core specs, the CoreSight components TRM
- * (ARM DDI 0314H), and ETM specs; also from
- * chip observation (e.g. TI SDTI).
+ * (ARM DDI 0314H), CoreSight System Design
+ * Guide (ARM DGI 0012D) and ETM specs; also
+ * from chip observation (e.g. TI SDTI).
*/
part_num = (c_pid0 & 0xff);
part_num |= (c_pid1 & 0x0f) << 8;
type = "CoreSight ETM11";
full = "(Embedded Trace)";
break;
- // case 0x113: what?
+ /* case 0x113: what? */
case 0x120: /* from OMAP3 memmap */
type = "TI SDTI";
full = "(System Debug Trace Interface)";
type = "Cortex-M3 ETM";
full = "(Embedded Trace)";
break;
+ case 0x930:
+ type = "Cortex-R4 ETM";
+ full = "(Embedded Trace)";
+ break;
case 0xc08:
type = "Cortex-A8 Debug";
full = "(Debug Unit)";
}
command_print(cmd_ctx, "\t\tPart is %s %s",
type, full);
- }
- else
- {
+ } else {
if (romentry)
command_print(cmd_ctx, "\t\tComponent not present");
else
}
entry_offset += 4;
} while (romentry > 0);
- }
- else
- {
+ } else
command_print(cmd_ctx, "\tNo ROM table present");
- }
- dap_ap_select(dap, apselold);
+ dap_ap_select(dap, ap_old);
return ERROR_OK;
}
struct arm *arm = target_to_arm(target);
struct adiv5_dap *dap = arm->dap;
- uint32_t apsel, apselsave, baseaddr;
+ uint32_t apsel, baseaddr;
int retval;
- apselsave = dap->apsel;
switch (CMD_ARGC) {
case 0:
apsel = dap->apsel;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
/* AP address is in bits 31:24 of DP_SELECT */
if (apsel >= 256)
- return ERROR_INVALID_ARGUMENTS;
+ return ERROR_COMMAND_SYNTAX_ERROR;
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- if (apselsave != apsel)
- dap_ap_select(dap, apsel);
+ dap_ap_select(dap, apsel);
/* NOTE: assumes we're talking to a MEM-AP, which
* has a base address. There are other kinds of AP,
* use the ID register to verify it's a MEM-AP.
*/
retval = dap_queue_ap_read(dap, AP_REG_BASE, &baseaddr);
+ if (retval != ERROR_OK)
+ return retval;
retval = dap_run(dap);
if (retval != ERROR_OK)
return retval;
command_print(CMD_CTX, "0x%8.8" PRIx32, baseaddr);
- if (apselsave != apsel)
- dap_ap_select(dap, apselsave);
-
return retval;
}
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
/* AP address is in bits 31:24 of DP_SELECT */
if (apsel >= 256)
- return ERROR_INVALID_ARGUMENTS;
+ return ERROR_COMMAND_SYNTAX_ERROR;
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
+ dap->apsel = apsel;
dap_ap_select(dap, apsel);
+
retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
+ if (retval != ERROR_OK)
+ return retval;
retval = dap_run(dap);
if (retval != ERROR_OK)
return retval;
struct arm *arm = target_to_arm(target);
struct adiv5_dap *dap = arm->dap;
- uint32_t apsel, apselsave, apid;
+ uint32_t apsel, apid;
int retval;
- apselsave = dap->apsel;
switch (CMD_ARGC) {
case 0:
apsel = dap->apsel;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
/* AP address is in bits 31:24 of DP_SELECT */
if (apsel >= 256)
- return ERROR_INVALID_ARGUMENTS;
+ return ERROR_COMMAND_SYNTAX_ERROR;
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- if (apselsave != apsel)
- dap_ap_select(dap, apsel);
+ dap_ap_select(dap, apsel);
retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
+ if (retval != ERROR_OK)
+ return retval;
retval = dap_run(dap);
if (retval != ERROR_OK)
return retval;
command_print(CMD_CTX, "0x%8.8" PRIx32, apid);
- if (apselsave != apsel)
- dap_ap_select(dap, apselsave);
return retval;
}
.name = "dap",
.mode = COMMAND_EXEC,
.help = "DAP command group",
+ .usage = "",
.chain = dap_commands,
},
COMMAND_REGISTRATION_DONE
};
-
-
Code Review / openocd.git / blobdiff