* Copyright (C) 2008 by Spencer Oliver *
* spen@spen-soft.co.uk *
* *
- * Copyright (C) 2009 by Oyvind Harboe *
+ * Copyright (C) 2009-2010 by Oyvind Harboe *
* oyvind.harboe@zylin.com *
* *
* Copyright (C) 2009-2010 by David Brownell *
* *
+ * Copyright (C) 2013 by Andreas Fritiofson *
+ * andreas.fritiofson@gmail.com *
+ * *
+ * Copyright (C) 2019-2021, Ampere Computing LLC *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
/**
* This file implements support for the ARM Debug Interface version 5 (ADIv5)
* debugging architecture. Compared with previous versions, this includes
* a low pin-count Serial Wire Debug (SWD) alternative to JTAG for message
- * transport, and focusses on memory mapped resources as defined by the
+ * transport, and focuses on memory mapped resources as defined by the
* CoreSight architecture.
*
* A key concept in ADIv5 is the Debug Access Port, or DAP. A DAP has two
* is set in the DP_CTRL_STAT register, the SSTICKYORUN status is set and
* further AP operations will fail. There are two basic methods to avoid
* such overrun errors. One involves polling for status instead of using
- * transaction piplining. The other involves adding delays to ensure the
+ * transaction pipelining. The other involves adding delays to ensure the
* AP has enough time to complete one operation before starting the next
* one. (For JTAG these delays are controlled by memaccess_tck.)
*/
/*
* Relevant specifications from ARM include:
*
- * ARM(tm) Debug Interface v5 Architecture Specification ARM IHI 0031A
+ * ARM(tm) Debug Interface v5 Architecture Specification ARM IHI 0031E
* CoreSight(tm) v1.0 Architecture Specification ARM IHI 0029B
*
* CoreSight(tm) DAP-Lite TRM, ARM DDI 0316D
#include "config.h"
#endif
+#include "jtag/interface.h"
+#include "arm.h"
#include "arm_adi_v5.h"
+#include "arm_coresight.h"
+#include "jtag/swd.h"
+#include "transport/transport.h"
+#include <helper/align.h>
+#include <helper/jep106.h>
#include <helper/time_support.h>
-
+#include <helper/list.h>
+#include <helper/jim-nvp.h>
/* ARM ADI Specification requires at least 10 bits used for TAR autoincrement */
uint32_t tar_block_size(uint32_t address)
Return the largest block starting at address that does not cross a tar block size alignment boundary
*/
-static uint32_t max_tar_block_size(uint32_t tar_autoincr_block, uint32_t address)
+static uint32_t max_tar_block_size(uint32_t tar_autoincr_block, target_addr_t address)
{
- return (tar_autoincr_block - ((tar_autoincr_block - 1) & address)) >> 2;
+ return tar_autoincr_block - ((tar_autoincr_block - 1) & address);
}
/***************************************************************************
* *
- * DPACC and APACC scanchain access through JTAG-DP *
+ * DP and MEM-AP register access through APACC and DPACC *
* *
***************************************************************************/
-/**
- * Scan DPACC or APACC using target ordered uint8_t buffers. No endianness
- * conversions are performed. See section 4.4.3 of the ADIv5 spec, which
- * discusses operations which access these registers.
- *
- * Note that only one scan is performed. If RnW is set, a separate scan
- * will be needed to collect the data which was read; the "invalue" collects
- * the posted result of a preceding operation, not the current one.
- *
- * @param swjdp the DAP
- * @param instr JTAG_DP_APACC (AP access) or JTAG_DP_DPACC (DP access)
- * @param reg_addr two significant bits; A[3:2]; for APACC access, the
- * SELECT register has more addressing bits.
- * @param RnW false iff outvalue will be written to the DP or AP
- * @param outvalue points to a 32-bit (little-endian) integer
- * @param invalue NULL, or points to a 32-bit (little-endian) integer
- * @param ack points to where the three bit JTAG_ACK_* code will be stored
- */
-static int adi_jtag_dp_scan(struct swjdp_common *swjdp,
- uint8_t instr, uint8_t reg_addr, uint8_t RnW,
- uint8_t *outvalue, uint8_t *invalue, uint8_t *ack)
+static int mem_ap_setup_csw(struct adiv5_ap *ap, uint32_t csw)
{
- struct arm_jtag *jtag_info = swjdp->jtag_info;
- struct scan_field fields[2];
- uint8_t out_addr_buf;
+ csw |= ap->csw_default;
- jtag_set_end_state(TAP_IDLE);
- arm_jtag_set_instr(jtag_info, instr, NULL);
-
- /* Scan out a read or write operation using some DP or AP register.
- * For APACC access with any sticky error flag set, this is discarded.
- */
- fields[0].tap = jtag_info->tap;
- fields[0].num_bits = 3;
- buf_set_u32(&out_addr_buf, 0, 3, ((reg_addr >> 1) & 0x6) | (RnW & 0x1));
- fields[0].out_value = &out_addr_buf;
- fields[0].in_value = ack;
-
- /* NOTE: if we receive JTAG_ACK_WAIT, the previous operation did not
- * complete; data we write is discarded, data we read is unpredictable.
- * When overrun detect is active, STICKYORUN is set.
- */
-
- fields[1].tap = jtag_info->tap;
- fields[1].num_bits = 32;
- fields[1].out_value = outvalue;
- fields[1].in_value = invalue;
-
- jtag_add_dr_scan(2, fields, jtag_get_end_state());
-
- /* Add specified number of tck clocks after starting memory bus
- * access, giving the hardware time to complete the access.
- * They provide more time for the (MEM) AP to complete the read ...
- * See "Minimum Response Time" for JTAG-DP, in the ADIv5 spec.
- */
- if ((instr == JTAG_DP_APACC)
- && ((reg_addr == AP_REG_DRW)
- || ((reg_addr & 0xF0) == AP_REG_BD0))
- && (swjdp->memaccess_tck != 0))
- jtag_add_runtest(swjdp->memaccess_tck,
- jtag_set_end_state(TAP_IDLE));
-
- return jtag_get_error();
+ if (csw != ap->csw_value) {
+ /* LOG_DEBUG("DAP: Set CSW %x",csw); */
+ int retval = dap_queue_ap_write(ap, MEM_AP_REG_CSW, csw);
+ if (retval != ERROR_OK) {
+ ap->csw_value = 0;
+ return retval;
+ }
+ ap->csw_value = csw;
+ }
+ return ERROR_OK;
}
-/**
- * Scan DPACC or APACC out and in from host ordered uint32_t buffers.
- * This is exactly like adi_jtag_dp_scan(), except that endianness
- * conversions are performed (so the types of invalue and outvalue
- * must be different).
- */
-static int adi_jtag_dp_scan_u32(struct swjdp_common *swjdp,
- uint8_t instr, uint8_t reg_addr, uint8_t RnW,
- uint32_t outvalue, uint32_t *invalue, uint8_t *ack)
+static int mem_ap_setup_tar(struct adiv5_ap *ap, target_addr_t tar)
{
- uint8_t out_value_buf[4];
- int retval;
-
- buf_set_u32(out_value_buf, 0, 32, outvalue);
-
- retval = adi_jtag_dp_scan(swjdp, instr, reg_addr, RnW,
- out_value_buf, (uint8_t *)invalue, ack);
- if (retval != ERROR_OK)
- return retval;
-
- if (invalue)
- jtag_add_callback(arm_le_to_h_u32,
- (jtag_callback_data_t) invalue);
-
- return retval;
+ if (!ap->tar_valid || tar != ap->tar_value) {
+ /* LOG_DEBUG("DAP: Set TAR %x",tar); */
+ int retval = dap_queue_ap_write(ap, MEM_AP_REG_TAR, (uint32_t)(tar & 0xffffffffUL));
+ if (retval == ERROR_OK && is_64bit_ap(ap)) {
+ /* See if bits 63:32 of tar is different from last setting */
+ if ((ap->tar_value >> 32) != (tar >> 32))
+ retval = dap_queue_ap_write(ap, MEM_AP_REG_TAR64, (uint32_t)(tar >> 32));
+ }
+ if (retval != ERROR_OK) {
+ ap->tar_valid = false;
+ return retval;
+ }
+ ap->tar_value = tar;
+ ap->tar_valid = true;
+ }
+ return ERROR_OK;
}
-/**
- * Utility to write AP registers.
- */
-static inline int adi_jtag_ap_write_check(struct swjdp_common *dap,
- uint8_t reg_addr, uint8_t *outvalue)
+static int mem_ap_read_tar(struct adiv5_ap *ap, target_addr_t *tar)
{
- return adi_jtag_dp_scan(dap, JTAG_DP_APACC, reg_addr, DPAP_WRITE,
- outvalue, NULL, NULL);
-}
+ uint32_t lower;
+ uint32_t upper = 0;
-static int adi_jtag_scan_inout_check_u32(struct swjdp_common *swjdp,
- uint8_t instr, uint8_t reg_addr, uint8_t RnW,
- uint32_t outvalue, uint32_t *invalue)
-{
- int retval;
+ int retval = dap_queue_ap_read(ap, MEM_AP_REG_TAR, &lower);
+ if (retval == ERROR_OK && is_64bit_ap(ap))
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_TAR64, &upper);
- /* Issue the read or write */
- retval = adi_jtag_dp_scan_u32(swjdp, instr, reg_addr,
- RnW, outvalue, NULL, NULL);
- if (retval != ERROR_OK)
+ if (retval != ERROR_OK) {
+ ap->tar_valid = false;
return retval;
-
- /* For reads, collect posted value; RDBUFF has no other effect.
- * Assumes read gets acked with OK/FAULT, and CTRL_STAT says "OK".
- */
- if ((RnW == DPAP_READ) && (invalue != NULL))
- retval = adi_jtag_dp_scan_u32(swjdp, JTAG_DP_DPACC,
- DP_RDBUFF, DPAP_READ, 0, invalue, &swjdp->ack);
- return retval;
-}
-
-int jtagdp_transaction_endcheck(struct swjdp_common *swjdp)
-{
- int retval;
- uint32_t ctrlstat;
-
- /* too expensive to call keep_alive() here */
-
-#if 0
- /* Danger!!!! BROKEN!!!! */
- adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
- DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
- /* Danger!!!! BROKEN!!!! Why will jtag_execute_queue() fail here????
- R956 introduced the check on return value here and now Michael Schwingen reports
- that this code no longer works....
-
- https://lists.berlios.de/pipermail/openocd-development/2008-September/003107.html
- */
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
- LOG_ERROR("BUG: Why does this fail the first time????");
}
- /* Why??? second time it works??? */
-#endif
- /* Post CTRL/STAT read; discard any previous posted read value
- * but collect its ACK status.
- */
- adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
- DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
+ retval = dap_run(ap->dap);
+ if (retval != ERROR_OK) {
+ ap->tar_valid = false;
return retval;
-
- swjdp->ack = swjdp->ack & 0x7;
-
- /* common code path avoids calling timeval_ms() */
- if (swjdp->ack != JTAG_ACK_OK_FAULT)
- {
- long long then = timeval_ms();
-
- while (swjdp->ack != JTAG_ACK_OK_FAULT)
- {
- if (swjdp->ack == JTAG_ACK_WAIT)
- {
- if ((timeval_ms()-then) > 1000)
- {
- /* NOTE: this would be a good spot
- * to use JTAG_DP_ABORT.
- */
- LOG_WARNING("Timeout (1000ms) waiting "
- "for ACK=OK/FAULT "
- "in JTAG-DP transaction");
- return ERROR_JTAG_DEVICE_ERROR;
- }
- }
- else
- {
- LOG_WARNING("Invalid ACK %#x "
- "in JTAG-DP transaction",
- swjdp->ack);
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
- DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- return retval;
- swjdp->ack = swjdp->ack & 0x7;
- }
}
- /* REVISIT also STICKYCMP, for pushed comparisons (nyet used) */
-
- /* Check for STICKYERR and STICKYORUN */
- if (ctrlstat & (SSTICKYORUN | SSTICKYERR))
- {
- LOG_DEBUG("jtag-dp: CTRL/STAT error, 0x%" PRIx32, ctrlstat);
- /* Check power to debug regions */
- if ((ctrlstat & 0xf0000000) != 0xf0000000)
- ahbap_debugport_init(swjdp);
- else
- {
- uint32_t mem_ap_csw, mem_ap_tar;
-
- /* Maybe print information about last intended
- * MEM-AP access; but not if autoincrementing.
- * *Real* CSW and TAR values are always shown.
- */
- if (swjdp->ap_tar_value != (uint32_t) -1)
- LOG_DEBUG("MEM-AP Cached values: "
- "ap_bank 0x%" PRIx32
- ", ap_csw 0x%" PRIx32
- ", ap_tar 0x%" PRIx32,
- swjdp->ap_bank_value,
- swjdp->ap_csw_value,
- swjdp->ap_tar_value);
-
- if (ctrlstat & SSTICKYORUN)
- LOG_ERROR("JTAG-DP OVERRUN - check clock, "
- "memaccess, or reduce jtag speed");
-
- if (ctrlstat & SSTICKYERR)
- LOG_ERROR("JTAG-DP STICKY ERROR");
-
- /* Clear Sticky Error Bits */
- adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
- DP_CTRL_STAT, DPAP_WRITE,
- swjdp->dp_ctrl_stat | SSTICKYORUN
- | SSTICKYERR, NULL);
- adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
- DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- return retval;
-
- LOG_DEBUG("jtag-dp: CTRL/STAT 0x%" PRIx32, ctrlstat);
-
- dap_ap_read_reg_u32(swjdp, AP_REG_CSW, &mem_ap_csw);
- dap_ap_read_reg_u32(swjdp, AP_REG_TAR, &mem_ap_tar);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- return retval;
- LOG_ERROR("MEM_AP_CSW 0x%" PRIx32 ", MEM_AP_TAR 0x%"
- PRIx32, mem_ap_csw, mem_ap_tar);
-
- }
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- return retval;
- return ERROR_JTAG_DEVICE_ERROR;
- }
+ *tar = (((target_addr_t)upper) << 32) | (target_addr_t)lower;
+ ap->tar_value = *tar;
+ ap->tar_valid = true;
return ERROR_OK;
}
-/***************************************************************************
- * *
- * DP and MEM-AP register access through APACC and DPACC *
- * *
-***************************************************************************/
-
-static int dap_dp_write_reg(struct swjdp_common *swjdp,
- uint32_t value, uint8_t reg_addr)
-{
- return adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
- reg_addr, DPAP_WRITE, value, NULL);
-}
-
-static int dap_dp_read_reg(struct swjdp_common *swjdp,
- uint32_t *value, uint8_t reg_addr)
-{
- return adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
- reg_addr, DPAP_READ, 0, value);
-}
-
-/**
- * Select one of the APs connected to the specified DAP. The
- * selection is implicitly used with future AP transactions.
- * This is a NOP if the specified AP is already selected.
- *
- * @param swjdp The DAP
- * @param apsel Number of the AP to (implicitly) use with further
- * transactions. This normally identifies a MEM-AP.
- */
-void dap_ap_select(struct swjdp_common *swjdp,uint8_t apsel)
+static uint32_t mem_ap_get_tar_increment(struct adiv5_ap *ap)
{
- uint32_t select = (apsel << 24) & 0xFF000000;
-
- if (select != swjdp->apsel)
- {
- swjdp->apsel = select;
- /* Switching AP invalidates cached values.
- * Values MUST BE UPDATED BEFORE AP ACCESS.
- */
- swjdp->ap_bank_value = -1;
- swjdp->ap_csw_value = -1;
- swjdp->ap_tar_value = -1;
+ switch (ap->csw_value & CSW_ADDRINC_MASK) {
+ case CSW_ADDRINC_SINGLE:
+ switch (ap->csw_value & CSW_SIZE_MASK) {
+ case CSW_8BIT:
+ return 1;
+ case CSW_16BIT:
+ return 2;
+ case CSW_32BIT:
+ return 4;
+ default:
+ return 0;
+ }
+ case CSW_ADDRINC_PACKED:
+ return 4;
}
+ return 0;
}
-/** Select the AP register bank matching bits 7:4 of ap_reg. */
-static int dap_ap_bankselect(struct swjdp_common *swjdp, uint32_t ap_reg)
-{
- uint32_t select = (ap_reg & 0x000000F0);
-
- if (select != swjdp->ap_bank_value)
- {
- swjdp->ap_bank_value = select;
- select |= swjdp->apsel;
- return dap_dp_write_reg(swjdp, select, DP_SELECT);
- } else
- return ERROR_OK;
-}
-
-static int dap_ap_write_reg(struct swjdp_common *swjdp,
- uint32_t reg_addr, uint8_t *out_value_buf)
-{
- int retval;
-
- retval = dap_ap_bankselect(swjdp, reg_addr);
- if (retval != ERROR_OK)
- return retval;
-
- return adi_jtag_ap_write_check(swjdp, reg_addr, out_value_buf);
-}
-
-/**
- * Asynchronous (queued) AP register write.
- *
- * @param swjdp The DAP whose currently selected AP will be written.
- * @param reg_addr Eight bit AP register address.
- * @param value Word to be written at reg_addr
- *
- * @return ERROR_OK if the transaction was properly queued, else a fault code.
- */
-int dap_ap_write_reg_u32(struct swjdp_common *swjdp,
- uint32_t reg_addr, uint32_t value)
-{
- uint8_t out_value_buf[4];
-
- buf_set_u32(out_value_buf, 0, 32, value);
- return dap_ap_write_reg(swjdp,
- reg_addr, out_value_buf);
-}
-
-/**
- * Asynchronous (queued) AP register eread.
- *
- * @param swjdp The DAP whose currently selected AP will be read.
- * @param reg_addr Eight bit AP register address.
- * @param value Points to where the 32-bit (little-endian) word will be stored.
- *
- * @return ERROR_OK if the transaction was properly queued, else a fault code.
+/* mem_ap_update_tar_cache is called after an access to MEM_AP_REG_DRW
*/
-int dap_ap_read_reg_u32(struct swjdp_common *swjdp,
- uint32_t reg_addr, uint32_t *value)
+static void mem_ap_update_tar_cache(struct adiv5_ap *ap)
{
- int retval;
-
- retval = dap_ap_bankselect(swjdp, reg_addr);
- if (retval != ERROR_OK)
- return retval;
+ if (!ap->tar_valid)
+ return;
- return adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_APACC, reg_addr,
- DPAP_READ, 0, value);
+ uint32_t inc = mem_ap_get_tar_increment(ap);
+ if (inc >= max_tar_block_size(ap->tar_autoincr_block, ap->tar_value))
+ ap->tar_valid = false;
+ else
+ ap->tar_value += inc;
}
/**
* Queue transactions setting up transfer parameters for the
* currently selected MEM-AP.
*
- * Subsequent transfers using registers like AP_REG_DRW or AP_REG_BD2
+ * Subsequent transfers using registers like MEM_AP_REG_DRW or MEM_AP_REG_BD2
* initiate data reads or writes using memory or peripheral addresses.
* If the CSW is configured for it, the TAR may be automatically
* incremented after each transfer.
*
- * @todo Rename to reflect it being specifically a MEM-AP function.
- *
- * @param swjdp The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP.
* @param csw MEM-AP Control/Status Word (CSW) register to assign. If this
* matches the cached value, the register is not changed.
* @param tar MEM-AP Transfer Address Register (TAR) to assign. If this
*
* @return ERROR_OK if the transaction was properly queued, else a fault code.
*/
-int dap_setup_accessport(struct swjdp_common *swjdp, uint32_t csw, uint32_t tar)
+static int mem_ap_setup_transfer(struct adiv5_ap *ap, uint32_t csw, target_addr_t tar)
{
int retval;
-
- csw = csw | CSW_DBGSWENABLE | CSW_MASTER_DEBUG | CSW_HPROT;
- if (csw != swjdp->ap_csw_value)
- {
- /* LOG_DEBUG("DAP: Set CSW %x",csw); */
- retval = dap_ap_write_reg_u32(swjdp, AP_REG_CSW, csw);
- if (retval != ERROR_OK)
- return retval;
- swjdp->ap_csw_value = csw;
- }
- if (tar != swjdp->ap_tar_value)
- {
- /* LOG_DEBUG("DAP: Set TAR %x",tar); */
- retval = dap_ap_write_reg_u32(swjdp, AP_REG_TAR, tar);
- if (retval != ERROR_OK)
- return retval;
- swjdp->ap_tar_value = tar;
- }
- /* Disable TAR cache when autoincrementing */
- if (csw & CSW_ADDRINC_MASK)
- swjdp->ap_tar_value = -1;
+ retval = mem_ap_setup_csw(ap, csw);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_setup_tar(ap, tar);
+ if (retval != ERROR_OK)
+ return retval;
return ERROR_OK;
}
/**
* Asynchronous (queued) read of a word from memory or a system register.
*
- * @param swjdp The DAP connected to the MEM-AP performing the read.
+ * @param ap The MEM-AP to access.
* @param address Address of the 32-bit word to read; it must be
* readable by the currently selected MEM-AP.
* @param value points to where the word will be stored when the
*
* @return ERROR_OK for success. Otherwise a fault code.
*/
-int mem_ap_read_u32(struct swjdp_common *swjdp, uint32_t address,
+int mem_ap_read_u32(struct adiv5_ap *ap, target_addr_t address,
uint32_t *value)
{
int retval;
/* Use banked addressing (REG_BDx) to avoid some link traffic
* (updating TAR) when reading several consecutive addresses.
*/
- retval = dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF,
- address & 0xFFFFFFF0);
+ retval = mem_ap_setup_transfer(ap,
+ CSW_32BIT | (ap->csw_value & CSW_ADDRINC_MASK),
+ address & 0xFFFFFFFFFFFFFFF0ull);
if (retval != ERROR_OK)
return retval;
- return dap_ap_read_reg_u32(swjdp, AP_REG_BD0 | (address & 0xC), value);
+ return dap_queue_ap_read(ap, MEM_AP_REG_BD0 | (address & 0xC), value);
}
/**
* Synchronous read of a word from memory or a system register.
* As a side effect, this flushes any queued transactions.
*
- * @param swjdp The DAP connected to the MEM-AP performing the read.
+ * @param ap The MEM-AP to access.
* @param address Address of the 32-bit word to read; it must be
* readable by the currently selected MEM-AP.
* @param value points to where the result will be stored.
* @return ERROR_OK for success; *value holds the result.
* Otherwise a fault code.
*/
-int mem_ap_read_atomic_u32(struct swjdp_common *swjdp, uint32_t address,
+int mem_ap_read_atomic_u32(struct adiv5_ap *ap, target_addr_t address,
uint32_t *value)
{
int retval;
- retval = mem_ap_read_u32(swjdp, address, value);
+ retval = mem_ap_read_u32(ap, address, value);
if (retval != ERROR_OK)
return retval;
- return jtagdp_transaction_endcheck(swjdp);
+ return dap_run(ap->dap);
}
/**
* Asynchronous (queued) write of a word to memory or a system register.
*
- * @param swjdp The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param address Address to be written; it must be writable by
* the currently selected MEM-AP.
* @param value Word that will be written to the address when transaction
*
* @return ERROR_OK for success. Otherwise a fault code.
*/
-int mem_ap_write_u32(struct swjdp_common *swjdp, uint32_t address,
+int mem_ap_write_u32(struct adiv5_ap *ap, target_addr_t address,
uint32_t value)
{
int retval;
/* Use banked addressing (REG_BDx) to avoid some link traffic
* (updating TAR) when writing several consecutive addresses.
*/
- retval = dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF,
- address & 0xFFFFFFF0);
+ retval = mem_ap_setup_transfer(ap,
+ CSW_32BIT | (ap->csw_value & CSW_ADDRINC_MASK),
+ address & 0xFFFFFFFFFFFFFFF0ull);
if (retval != ERROR_OK)
return retval;
- return dap_ap_write_reg_u32(swjdp, AP_REG_BD0 | (address & 0xC),
+ return dap_queue_ap_write(ap, MEM_AP_REG_BD0 | (address & 0xC),
value);
}
* Synchronous write of a word to memory or a system register.
* As a side effect, this flushes any queued transactions.
*
- * @param swjdp The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param address Address to be written; it must be writable by
* the currently selected MEM-AP.
* @param value Word that will be written.
*
* @return ERROR_OK for success; the data was written. Otherwise a fault code.
*/
-int mem_ap_write_atomic_u32(struct swjdp_common *swjdp, uint32_t address,
+int mem_ap_write_atomic_u32(struct adiv5_ap *ap, target_addr_t address,
uint32_t value)
{
- int retval = mem_ap_write_u32(swjdp, address, value);
+ int retval = mem_ap_write_u32(ap, address, value);
if (retval != ERROR_OK)
return retval;
- return jtagdp_transaction_endcheck(swjdp);
+ return dap_run(ap->dap);
}
-/*****************************************************************************
-* *
-* mem_ap_write_buf(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address) *
-* *
-* Write a buffer in target order (little endian) *
-* *
-*****************************************************************************/
-int mem_ap_write_buf_u32(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address)
+/**
+ * Synchronous write of a block of memory, using a specific access size.
+ *
+ * @param ap The MEM-AP to access.
+ * @param buffer The data buffer to write. No particular alignment is assumed.
+ * @param size Which access size to use, in bytes. 1, 2 or 4.
+ * @param count The number of writes to do (in size units, not bytes).
+ * @param address Address to be written; it must be writable by the currently selected MEM-AP.
+ * @param addrinc Whether the target address should be increased for each write or not. This
+ * should normally be true, except when writing to e.g. a FIFO.
+ * @return ERROR_OK on success, otherwise an error code.
+ */
+static int mem_ap_write(struct adiv5_ap *ap, const uint8_t *buffer, uint32_t size, uint32_t count,
+ target_addr_t address, bool addrinc)
{
- int wcount, blocksize, writecount, errorcount = 0, retval = ERROR_OK;
- uint32_t adr = address;
- uint8_t* pBuffer = buffer;
-
- count >>= 2;
- wcount = count;
+ struct adiv5_dap *dap = ap->dap;
+ size_t nbytes = size * count;
+ const uint32_t csw_addrincr = addrinc ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
+ uint32_t csw_size;
+ target_addr_t addr_xor;
+ int retval = ERROR_OK;
- /* if we have an unaligned access - reorder data */
- if (adr & 0x3u)
- {
- for (writecount = 0; writecount < count; writecount++)
- {
- int i;
- uint32_t outvalue;
- memcpy(&outvalue, pBuffer, sizeof(uint32_t));
-
- for (i = 0; i < 4; i++)
- {
- *((uint8_t*)pBuffer + (adr & 0x3)) = outvalue;
- outvalue >>= 8;
- adr++;
- }
- pBuffer += sizeof(uint32_t);
- }
+ /* TI BE-32 Quirks mode:
+ * Writes on big-endian TMS570 behave very strangely. Observed behavior:
+ * size write address bytes written in order
+ * 4 TAR ^ 0 (val >> 24), (val >> 16), (val >> 8), (val)
+ * 2 TAR ^ 2 (val >> 8), (val)
+ * 1 TAR ^ 3 (val)
+ * For example, if you attempt to write a single byte to address 0, the processor
+ * will actually write a byte to address 3.
+ *
+ * To make writes of size < 4 work as expected, we xor a value with the address before
+ * setting the TAP, and we set the TAP after every transfer rather then relying on
+ * address increment. */
+
+ if (size == 4) {
+ csw_size = CSW_32BIT;
+ addr_xor = 0;
+ } else if (size == 2) {
+ csw_size = CSW_16BIT;
+ addr_xor = dap->ti_be_32_quirks ? 2 : 0;
+ } else if (size == 1) {
+ csw_size = CSW_8BIT;
+ addr_xor = dap->ti_be_32_quirks ? 3 : 0;
+ } else {
+ return ERROR_TARGET_UNALIGNED_ACCESS;
}
- while (wcount > 0)
- {
- /* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(swjdp->tar_autoincr_block, address);
- if (wcount < blocksize)
- blocksize = wcount;
-
- /* handle unaligned data at 4k boundary */
- if (blocksize == 0)
- blocksize = 1;
-
- dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_SINGLE, address);
-
- for (writecount = 0; writecount < blocksize; writecount++)
- {
- dap_ap_write_reg(swjdp, AP_REG_DRW, buffer + 4 * writecount);
- }
+ if (ap->unaligned_access_bad && (address % size != 0))
+ return ERROR_TARGET_UNALIGNED_ACCESS;
- if (jtagdp_transaction_endcheck(swjdp) == ERROR_OK)
- {
- wcount = wcount - blocksize;
- address = address + 4 * blocksize;
- buffer = buffer + 4 * blocksize;
- }
- else
- {
- errorcount++;
- }
+ while (nbytes > 0) {
+ uint32_t this_size = size;
- if (errorcount > 1)
- {
- LOG_WARNING("Block write error address 0x%" PRIx32 ", wcount 0x%x", address, wcount);
- return ERROR_JTAG_DEVICE_ERROR;
+ /* Select packed transfer if possible */
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
+ this_size = 4;
+ retval = mem_ap_setup_csw(ap, csw_size | CSW_ADDRINC_PACKED);
+ } else {
+ retval = mem_ap_setup_csw(ap, csw_size | csw_addrincr);
}
- }
-
- return retval;
-}
-
-static int mem_ap_write_buf_packed_u16(struct swjdp_common *swjdp,
- uint8_t *buffer, int count, uint32_t address)
-{
- int retval = ERROR_OK;
- int wcount, blocksize, writecount, i;
-
- wcount = count >> 1;
- while (wcount > 0)
- {
- int nbytes;
-
- /* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(swjdp->tar_autoincr_block, address);
-
- if (wcount < blocksize)
- blocksize = wcount;
+ if (retval != ERROR_OK)
+ break;
- /* handle unaligned data at 4k boundary */
- if (blocksize == 0)
- blocksize = 1;
+ retval = mem_ap_setup_tar(ap, address ^ addr_xor);
+ if (retval != ERROR_OK)
+ return retval;
- dap_setup_accessport(swjdp, CSW_16BIT | CSW_ADDRINC_PACKED, address);
- writecount = blocksize;
+ /* How many source bytes each transfer will consume, and their location in the DRW,
+ * depends on the type of transfer and alignment. See ARM document IHI0031C. */
+ uint32_t outvalue = 0;
+ uint32_t drw_byte_idx = address;
+ if (dap->ti_be_32_quirks) {
+ switch (this_size) {
+ case 4:
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx & 3) ^ addr_xor);
+ break;
+ case 2:
+ outvalue |= (uint32_t)*buffer++ << 8 * (1 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (1 ^ (drw_byte_idx & 3) ^ addr_xor);
+ break;
+ case 1:
+ outvalue |= (uint32_t)*buffer++ << 8 * (0 ^ (drw_byte_idx & 3) ^ addr_xor);
+ break;
+ }
+ } else {
+ switch (this_size) {
+ case 4:
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx++ & 3);
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx++ & 3);
+ /* fallthrough */
+ case 2:
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx++ & 3);
+ /* fallthrough */
+ case 1:
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx & 3);
+ }
+ }
- do
- {
- nbytes = MIN((writecount << 1), 4);
+ nbytes -= this_size;
- if (nbytes < 4)
- {
- if (mem_ap_write_buf_u16(swjdp, buffer,
- nbytes, address) != ERROR_OK)
- {
- LOG_WARNING("Block write error address "
- "0x%" PRIx32 ", count 0x%x",
- address, count);
- return ERROR_JTAG_DEVICE_ERROR;
- }
+ retval = dap_queue_ap_write(ap, MEM_AP_REG_DRW, outvalue);
+ if (retval != ERROR_OK)
+ break;
- address += nbytes >> 1;
- }
- else
- {
- uint32_t outvalue;
- memcpy(&outvalue, buffer, sizeof(uint32_t));
-
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer + (address & 0x3)) = outvalue;
- outvalue >>= 8;
- address++;
- }
-
- memcpy(&outvalue, buffer, sizeof(uint32_t));
- dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
- if (jtagdp_transaction_endcheck(swjdp) != ERROR_OK)
- {
- LOG_WARNING("Block write error address "
- "0x%" PRIx32 ", count 0x%x",
- address, count);
- return ERROR_JTAG_DEVICE_ERROR;
- }
- }
+ mem_ap_update_tar_cache(ap);
+ if (addrinc)
+ address += this_size;
+ }
- buffer += nbytes >> 1;
- writecount -= nbytes >> 1;
+ /* REVISIT: Might want to have a queued version of this function that does not run. */
+ if (retval == ERROR_OK)
+ retval = dap_run(dap);
- } while (writecount);
- wcount -= blocksize;
+ if (retval != ERROR_OK) {
+ target_addr_t tar;
+ if (mem_ap_read_tar(ap, &tar) == ERROR_OK)
+ LOG_ERROR("Failed to write memory at " TARGET_ADDR_FMT, tar);
+ else
+ LOG_ERROR("Failed to write memory and, additionally, failed to find out where");
}
return retval;
}
-int mem_ap_write_buf_u16(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address)
+/**
+ * Synchronous read of a block of memory, using a specific access size.
+ *
+ * @param ap The MEM-AP to access.
+ * @param buffer The data buffer to receive the data. No particular alignment is assumed.
+ * @param size Which access size to use, in bytes. 1, 2 or 4.
+ * @param count The number of reads to do (in size units, not bytes).
+ * @param adr Address to be read; it must be readable by the currently selected MEM-AP.
+ * @param addrinc Whether the target address should be increased after each read or not. This
+ * should normally be true, except when reading from e.g. a FIFO.
+ * @return ERROR_OK on success, otherwise an error code.
+ */
+static int mem_ap_read(struct adiv5_ap *ap, uint8_t *buffer, uint32_t size, uint32_t count,
+ target_addr_t adr, bool addrinc)
{
+ struct adiv5_dap *dap = ap->dap;
+ size_t nbytes = size * count;
+ const uint32_t csw_addrincr = addrinc ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
+ uint32_t csw_size;
+ target_addr_t address = adr;
int retval = ERROR_OK;
- if (count >= 4)
- return mem_ap_write_buf_packed_u16(swjdp, buffer, count, address);
-
- while (count > 0)
- {
- dap_setup_accessport(swjdp, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
- uint16_t svalue;
- memcpy(&svalue, buffer, sizeof(uint16_t));
- uint32_t outvalue = (uint32_t)svalue << 8 * (address & 0x3);
- dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
- retval = jtagdp_transaction_endcheck(swjdp);
- count -= 2;
- address += 2;
- buffer += 2;
+ /* TI BE-32 Quirks mode:
+ * Reads on big-endian TMS570 behave strangely differently than writes.
+ * They read from the physical address requested, but with DRW byte-reversed.
+ * For example, a byte read from address 0 will place the result in the high bytes of DRW.
+ * Also, packed 8-bit and 16-bit transfers seem to sometimes return garbage in some bytes,
+ * so avoid them. */
+
+ if (size == 4)
+ csw_size = CSW_32BIT;
+ else if (size == 2)
+ csw_size = CSW_16BIT;
+ else if (size == 1)
+ csw_size = CSW_8BIT;
+ else
+ return ERROR_TARGET_UNALIGNED_ACCESS;
+
+ if (ap->unaligned_access_bad && (adr % size != 0))
+ return ERROR_TARGET_UNALIGNED_ACCESS;
+
+ /* Allocate buffer to hold the sequence of DRW reads that will be made. This is a significant
+ * over-allocation if packed transfers are going to be used, but determining the real need at
+ * this point would be messy. */
+ uint32_t *read_buf = calloc(count, sizeof(uint32_t));
+ /* Multiplication count * sizeof(uint32_t) may overflow, calloc() is safe */
+ uint32_t *read_ptr = read_buf;
+ if (!read_buf) {
+ LOG_ERROR("Failed to allocate read buffer");
+ return ERROR_FAIL;
}
- return retval;
-}
-
-static int mem_ap_write_buf_packed_u8(struct swjdp_common *swjdp,
- uint8_t *buffer, int count, uint32_t address)
-{
- int retval = ERROR_OK;
- int wcount, blocksize, writecount, i;
+ /* Queue up all reads. Each read will store the entire DRW word in the read buffer. How many
+ * useful bytes it contains, and their location in the word, depends on the type of transfer
+ * and alignment. */
+ while (nbytes > 0) {
+ uint32_t this_size = size;
+
+ /* Select packed transfer if possible */
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
+ this_size = 4;
+ retval = mem_ap_setup_csw(ap, csw_size | CSW_ADDRINC_PACKED);
+ } else {
+ retval = mem_ap_setup_csw(ap, csw_size | csw_addrincr);
+ }
+ if (retval != ERROR_OK)
+ break;
- wcount = count;
+ retval = mem_ap_setup_tar(ap, address);
+ if (retval != ERROR_OK)
+ break;
- while (wcount > 0)
- {
- int nbytes;
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_DRW, read_ptr++);
+ if (retval != ERROR_OK)
+ break;
- /* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(swjdp->tar_autoincr_block, address);
+ nbytes -= this_size;
+ if (addrinc)
+ address += this_size;
- if (wcount < blocksize)
- blocksize = wcount;
+ mem_ap_update_tar_cache(ap);
+ }
- dap_setup_accessport(swjdp, CSW_8BIT | CSW_ADDRINC_PACKED, address);
- writecount = blocksize;
+ if (retval == ERROR_OK)
+ retval = dap_run(dap);
+
+ /* Restore state */
+ address = adr;
+ nbytes = size * count;
+ read_ptr = read_buf;
+
+ /* If something failed, read TAR to find out how much data was successfully read, so we can
+ * at least give the caller what we have. */
+ if (retval != ERROR_OK) {
+ target_addr_t tar;
+ if (mem_ap_read_tar(ap, &tar) == ERROR_OK) {
+ /* TAR is incremented after failed transfer on some devices (eg Cortex-M4) */
+ LOG_ERROR("Failed to read memory at " TARGET_ADDR_FMT, tar);
+ if (nbytes > tar - address)
+ nbytes = tar - address;
+ } else {
+ LOG_ERROR("Failed to read memory and, additionally, failed to find out where");
+ nbytes = 0;
+ }
+ }
- do
- {
- nbytes = MIN(writecount, 4);
+ /* Replay loop to populate caller's buffer from the correct word and byte lane */
+ while (nbytes > 0) {
+ uint32_t this_size = size;
- if (nbytes < 4)
- {
- if (mem_ap_write_buf_u8(swjdp, buffer, nbytes, address) != ERROR_OK)
- {
- LOG_WARNING("Block write error address "
- "0x%" PRIx32 ", count 0x%x",
- address, count);
- return ERROR_JTAG_DEVICE_ERROR;
- }
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
+ this_size = 4;
+ }
- address += nbytes;
+ if (dap->ti_be_32_quirks) {
+ switch (this_size) {
+ case 4:
+ *buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
+ *buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
+ /* fallthrough */
+ case 2:
+ *buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
+ /* fallthrough */
+ case 1:
+ *buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
}
- else
- {
- uint32_t outvalue;
- memcpy(&outvalue, buffer, sizeof(uint32_t));
-
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer + (address & 0x3)) = outvalue;
- outvalue >>= 8;
- address++;
- }
-
- memcpy(&outvalue, buffer, sizeof(uint32_t));
- dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
- if (jtagdp_transaction_endcheck(swjdp) != ERROR_OK)
- {
- LOG_WARNING("Block write error address "
- "0x%" PRIx32 ", count 0x%x",
- address, count);
- return ERROR_JTAG_DEVICE_ERROR;
- }
+ } else {
+ switch (this_size) {
+ case 4:
+ *buffer++ = *read_ptr >> 8 * (address++ & 3);
+ *buffer++ = *read_ptr >> 8 * (address++ & 3);
+ /* fallthrough */
+ case 2:
+ *buffer++ = *read_ptr >> 8 * (address++ & 3);
+ /* fallthrough */
+ case 1:
+ *buffer++ = *read_ptr >> 8 * (address++ & 3);
}
+ }
- buffer += nbytes;
- writecount -= nbytes;
-
- } while (writecount);
- wcount -= blocksize;
+ read_ptr++;
+ nbytes -= this_size;
}
+ free(read_buf);
return retval;
}
-int mem_ap_write_buf_u8(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address)
+int mem_ap_read_buf(struct adiv5_ap *ap,
+ uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address)
{
- int retval = ERROR_OK;
-
- if (count >= 4)
- return mem_ap_write_buf_packed_u8(swjdp, buffer, count, address);
+ return mem_ap_read(ap, buffer, size, count, address, true);
+}
- while (count > 0)
- {
- dap_setup_accessport(swjdp, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
- uint32_t outvalue = (uint32_t)*buffer << 8 * (address & 0x3);
- dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
- retval = jtagdp_transaction_endcheck(swjdp);
- count--;
- address++;
- buffer++;
- }
+int mem_ap_write_buf(struct adiv5_ap *ap,
+ const uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address)
+{
+ return mem_ap_write(ap, buffer, size, count, address, true);
+}
- return retval;
+int mem_ap_read_buf_noincr(struct adiv5_ap *ap,
+ uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address)
+{
+ return mem_ap_read(ap, buffer, size, count, address, false);
}
-/**
- * Synchronously read a block of 32-bit words into a buffer
- * @param swjdp The DAP connected to the MEM-AP.
- * @param buffer where the words will be stored (in host byte order).
- * @param count How many words to read.
- * @param address Memory address from which to read words; all the
- * words must be readable by the currently selected MEM-AP.
- */
-int mem_ap_read_buf_u32(struct swjdp_common *swjdp, uint8_t *buffer,
- int count, uint32_t address)
+int mem_ap_write_buf_noincr(struct adiv5_ap *ap,
+ const uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address)
{
- int wcount, blocksize, readcount, errorcount = 0, retval = ERROR_OK;
- uint32_t adr = address;
- uint8_t* pBuffer = buffer;
+ return mem_ap_write(ap, buffer, size, count, address, false);
+}
- count >>= 2;
- wcount = count;
+/*--------------------------------------------------------------------------*/
- while (wcount > 0)
- {
- /* Adjust to read blocks within boundaries aligned to the
- * TAR autoincrement size (at least 2^10). Autoincrement
- * mode avoids an extra per-word roundtrip to update TAR.
- */
- blocksize = max_tar_block_size(swjdp->tar_autoincr_block,
- address);
- if (wcount < blocksize)
- blocksize = wcount;
-
- /* handle unaligned data at 4k boundary */
- if (blocksize == 0)
- blocksize = 1;
-
- dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_SINGLE,
- address);
-
- /* Scan out first read */
- adi_jtag_dp_scan(swjdp, JTAG_DP_APACC, AP_REG_DRW,
- DPAP_READ, 0, NULL, NULL);
- for (readcount = 0; readcount < blocksize - 1; readcount++)
- {
- /* Scan out next read; scan in posted value for the
- * previous one. Assumes read is acked "OK/FAULT",
- * and CTRL_STAT says that meant "OK".
- */
- adi_jtag_dp_scan(swjdp, JTAG_DP_APACC, AP_REG_DRW,
- DPAP_READ, 0, buffer + 4 * readcount,
- &swjdp->ack);
- }
- /* Scan in last posted value; RDBUFF has no other effect,
- * assuming ack is OK/FAULT and CTRL_STAT says "OK".
- */
- adi_jtag_dp_scan(swjdp, JTAG_DP_DPACC, DP_RDBUFF,
- DPAP_READ, 0, buffer + 4 * readcount,
- &swjdp->ack);
- if (jtagdp_transaction_endcheck(swjdp) == ERROR_OK)
- {
- wcount = wcount - blocksize;
- address += 4 * blocksize;
- buffer += 4 * blocksize;
- }
- else
- {
- errorcount++;
- }
+#define DAP_POWER_DOMAIN_TIMEOUT (10)
- if (errorcount > 1)
- {
- LOG_WARNING("Block read error address 0x%" PRIx32
- ", count 0x%x", address, count);
- return ERROR_JTAG_DEVICE_ERROR;
- }
- }
+/*--------------------------------------------------------------------------*/
- /* if we have an unaligned access - reorder data */
- if (adr & 0x3u)
- {
- for (readcount = 0; readcount < count; readcount++)
- {
- int i;
- uint32_t data;
- memcpy(&data, pBuffer, sizeof(uint32_t));
-
- for (i = 0; i < 4; i++)
- {
- *((uint8_t*)pBuffer) =
- (data >> 8 * (adr & 0x3));
- pBuffer++;
- adr++;
- }
- }
+/**
+ * Invalidate cached DP select and cached TAR and CSW of all APs
+ */
+void dap_invalidate_cache(struct adiv5_dap *dap)
+{
+ dap->select = DP_SELECT_INVALID;
+ dap->last_read = NULL;
+
+ int i;
+ for (i = 0; i <= DP_APSEL_MAX; i++) {
+ /* force csw and tar write on the next mem-ap access */
+ dap->ap[i].tar_valid = false;
+ dap->ap[i].csw_value = 0;
}
-
- return retval;
}
-static int mem_ap_read_buf_packed_u16(struct swjdp_common *swjdp,
- uint8_t *buffer, int count, uint32_t address)
+/**
+ * Initialize a DAP. This sets up the power domains, prepares the DP
+ * for further use and activates overrun checking.
+ *
+ * @param dap The DAP being initialized.
+ */
+int dap_dp_init(struct adiv5_dap *dap)
{
- uint32_t invalue;
- int retval = ERROR_OK;
- int wcount, blocksize, readcount, i;
+ int retval;
- wcount = count >> 1;
+ LOG_DEBUG("%s", adiv5_dap_name(dap));
- while (wcount > 0)
- {
- int nbytes;
-
- /* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(swjdp->tar_autoincr_block, address);
- if (wcount < blocksize)
- blocksize = wcount;
-
- dap_setup_accessport(swjdp, CSW_16BIT | CSW_ADDRINC_PACKED, address);
-
- /* handle unaligned data at 4k boundary */
- if (blocksize == 0)
- blocksize = 1;
- readcount = blocksize;
-
- do
- {
- dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
- if (jtagdp_transaction_endcheck(swjdp) != ERROR_OK)
- {
- LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
- return ERROR_JTAG_DEVICE_ERROR;
- }
+ dap->do_reconnect = false;
+ dap_invalidate_cache(dap);
- nbytes = MIN((readcount << 1), 4);
+ /*
+ * Early initialize dap->dp_ctrl_stat.
+ * In jtag mode only, if the following queue run (in dap_dp_poll_register)
+ * fails and sets the sticky error, it will trigger the clearing
+ * of the sticky. Without this initialization system and debug power
+ * would be disabled while clearing the sticky error bit.
+ */
+ dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
- buffer++;
- address++;
- }
+ /*
+ * This write operation clears the sticky error bit in jtag mode only and
+ * is ignored in swd mode. It also powers-up system and debug domains in
+ * both jtag and swd modes, if not done before.
+ */
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat | SSTICKYERR);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* Check that we have debug power domains activated */
+ LOG_DEBUG("DAP: wait CDBGPWRUPACK");
+ retval = dap_dp_poll_register(dap, DP_CTRL_STAT,
+ CDBGPWRUPACK, CDBGPWRUPACK,
+ DAP_POWER_DOMAIN_TIMEOUT);
+ if (retval != ERROR_OK)
+ return retval;
- readcount -= (nbytes >> 1);
- } while (readcount);
- wcount -= blocksize;
+ if (!dap->ignore_syspwrupack) {
+ LOG_DEBUG("DAP: wait CSYSPWRUPACK");
+ retval = dap_dp_poll_register(dap, DP_CTRL_STAT,
+ CSYSPWRUPACK, CSYSPWRUPACK,
+ DAP_POWER_DOMAIN_TIMEOUT);
+ if (retval != ERROR_OK)
+ return retval;
}
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* With debug power on we can activate OVERRUN checking */
+ dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
+ return retval;
+
return retval;
}
/**
- * Synchronously read a block of 16-bit halfwords into a buffer
- * @param swjdp The DAP connected to the MEM-AP.
- * @param buffer where the halfwords will be stored (in host byte order).
- * @param count How many halfwords to read.
- * @param address Memory address from which to read words; all the
- * words must be readable by the currently selected MEM-AP.
+ * Initialize a DAP or do reconnect if DAP is not accessible.
+ *
+ * @param dap The DAP being initialized.
*/
-int mem_ap_read_buf_u16(struct swjdp_common *swjdp, uint8_t *buffer,
- int count, uint32_t address)
+int dap_dp_init_or_reconnect(struct adiv5_dap *dap)
{
- uint32_t invalue, i;
- int retval = ERROR_OK;
+ LOG_DEBUG("%s", adiv5_dap_name(dap));
- if (count >= 4)
- return mem_ap_read_buf_packed_u16(swjdp, buffer, count, address);
+ /*
+ * Early initialize dap->dp_ctrl_stat.
+ * In jtag mode only, if the following atomic reads fail and set the
+ * sticky error, it will trigger the clearing of the sticky. Without this
+ * initialization system and debug power would be disabled while clearing
+ * the sticky error bit.
+ */
+ dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
- while (count > 0)
- {
- dap_setup_accessport(swjdp, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
- dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
- retval = jtagdp_transaction_endcheck(swjdp);
- if (address & 0x1)
- {
- for (i = 0; i < 2; i++)
- {
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
- buffer++;
- address++;
- }
- }
- else
- {
- uint16_t svalue = (invalue >> 8 * (address & 0x3));
- memcpy(buffer, &svalue, sizeof(uint16_t));
- address += 2;
- buffer += 2;
- }
- count -= 2;
- }
+ dap->do_reconnect = false;
- return retval;
+ dap_dp_read_atomic(dap, DP_CTRL_STAT, NULL);
+ if (dap->do_reconnect) {
+ /* dap connect calls dap_dp_init() after transport dependent initialization */
+ return dap->ops->connect(dap);
+ } else {
+ return dap_dp_init(dap);
+ }
}
-/* FIX!!! is this a potential performance bottleneck w.r.t. requiring too many
- * roundtrips when jtag_execute_queue() has a large overhead(e.g. for USB)s?
+/**
+ * Initialize a DAP. This sets up the power domains, prepares the DP
+ * for further use, and arranges to use AP #0 for all AP operations
+ * until dap_ap-select() changes that policy.
*
- * The solution is to arrange for a large out/in scan in this loop and
- * and convert data afterwards.
+ * @param ap The MEM-AP being initialized.
*/
-static int mem_ap_read_buf_packed_u8(struct swjdp_common *swjdp,
- uint8_t *buffer, int count, uint32_t address)
+int mem_ap_init(struct adiv5_ap *ap)
{
- uint32_t invalue;
- int retval = ERROR_OK;
- int wcount, blocksize, readcount, i;
+ /* check that we support packed transfers */
+ uint32_t csw, cfg;
+ int retval;
+ struct adiv5_dap *dap = ap->dap;
- wcount = count;
+ /* Set ap->cfg_reg before calling mem_ap_setup_transfer(). */
+ /* mem_ap_setup_transfer() needs to know if the MEM_AP supports LPAE. */
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_CFG, &cfg);
+ if (retval != ERROR_OK)
+ return retval;
- while (wcount > 0)
- {
- int nbytes;
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
+ return retval;
- /* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(swjdp->tar_autoincr_block, address);
+ ap->cfg_reg = cfg;
+ ap->tar_valid = false;
+ ap->csw_value = 0; /* force csw and tar write */
+ retval = mem_ap_setup_transfer(ap, CSW_8BIT | CSW_ADDRINC_PACKED, 0);
+ if (retval != ERROR_OK)
+ return retval;
- if (wcount < blocksize)
- blocksize = wcount;
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_CSW, &csw);
+ if (retval != ERROR_OK)
+ return retval;
- dap_setup_accessport(swjdp, CSW_8BIT | CSW_ADDRINC_PACKED, address);
- readcount = blocksize;
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
+ return retval;
- do
- {
- dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
- if (jtagdp_transaction_endcheck(swjdp) != ERROR_OK)
- {
- LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
- return ERROR_JTAG_DEVICE_ERROR;
- }
+ if (csw & CSW_ADDRINC_PACKED)
+ ap->packed_transfers = true;
+ else
+ ap->packed_transfers = false;
- nbytes = MIN(readcount, 4);
+ /* Packed transfers on TI BE-32 processors do not work correctly in
+ * many cases. */
+ if (dap->ti_be_32_quirks)
+ ap->packed_transfers = false;
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
- buffer++;
- address++;
- }
+ LOG_DEBUG("MEM_AP Packed Transfers: %s",
+ ap->packed_transfers ? "enabled" : "disabled");
- readcount -= nbytes;
- } while (readcount);
- wcount -= blocksize;
- }
+ /* The ARM ADI spec leaves implementation-defined whether unaligned
+ * memory accesses work, only work partially, or cause a sticky error.
+ * On TI BE-32 processors, reads seem to return garbage in some bytes
+ * and unaligned writes seem to cause a sticky error.
+ * TODO: it would be nice to have a way to detect whether unaligned
+ * operations are supported on other processors. */
+ ap->unaligned_access_bad = dap->ti_be_32_quirks;
- return retval;
+ LOG_DEBUG("MEM_AP CFG: large data %d, long address %d, big-endian %d",
+ !!(cfg & MEM_AP_REG_CFG_LD), !!(cfg & MEM_AP_REG_CFG_LA), !!(cfg & MEM_AP_REG_CFG_BE));
+
+ return ERROR_OK;
}
/**
- * Synchronously read a block of bytes into a buffer
- * @param swjdp The DAP connected to the MEM-AP.
- * @param buffer where the bytes will be stored.
- * @param count How many bytes to read.
- * @param address Memory address from which to read data; all the
- * data must be readable by the currently selected MEM-AP.
+ * Put the debug link into SWD mode, if the target supports it.
+ * The link's initial mode may be either JTAG (for example,
+ * with SWJ-DP after reset) or SWD.
+ *
+ * Note that targets using the JTAG-DP do not support SWD, and that
+ * some targets which could otherwise support it may have been
+ * configured to disable SWD signaling
+ *
+ * @param dap The DAP used
+ * @return ERROR_OK or else a fault code.
*/
-int mem_ap_read_buf_u8(struct swjdp_common *swjdp, uint8_t *buffer,
- int count, uint32_t address)
+int dap_to_swd(struct adiv5_dap *dap)
{
- uint32_t invalue;
- int retval = ERROR_OK;
-
- if (count >= 4)
- return mem_ap_read_buf_packed_u8(swjdp, buffer, count, address);
-
- while (count > 0)
- {
- dap_setup_accessport(swjdp, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
- dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
- retval = jtagdp_transaction_endcheck(swjdp);
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
- count--;
- address++;
- buffer++;
- }
+ LOG_DEBUG("Enter SWD mode");
- return retval;
+ return dap_send_sequence(dap, JTAG_TO_SWD);
}
/**
- * Initialize a DAP. This sets up the power domains, prepares the DP
- * for further use, and arranges to use AP #0 for all AP operations
- * until dap_ap-select() changes that policy.
+ * Put the debug link into JTAG mode, if the target supports it.
+ * The link's initial mode may be either SWD or JTAG.
*
- * @param swjdp The DAP being initialized.
+ * Note that targets implemented with SW-DP do not support JTAG, and
+ * that some targets which could otherwise support it may have been
+ * configured to disable JTAG signaling
*
- * @todo Rename this. We also need an initialization scheme which account
- * for SWD transports not just JTAG; that will need to address differences
- * in layering. (JTAG is useful without any debug target; but not SWD.)
- * And this may not even use an AHB-AP ... e.g. DAP-Lite uses an APB-AP.
+ * @param dap The DAP used
+ * @return ERROR_OK or else a fault code.
*/
-int ahbap_debugport_init(struct swjdp_common *swjdp)
+int dap_to_jtag(struct adiv5_dap *dap)
{
- uint32_t idreg, romaddr, dummy;
- uint32_t ctrlstat;
- int cnt = 0;
- int retval;
+ LOG_DEBUG("Enter JTAG mode");
- LOG_DEBUG(" ");
+ return dap_send_sequence(dap, SWD_TO_JTAG);
+}
- /* Default MEM-AP setup.
- *
- * REVISIT AP #0 may be an inappropriate default for this.
- * Should we probe, or take a hint from the caller?
- * Presumably we can ignore the possibility of multiple APs.
- */
- swjdp->apsel = !0;
- dap_ap_select(swjdp, 0);
+/* CID interpretation -- see ARM IHI 0029E table B2-7
+ * and ARM IHI 0031E table D1-2.
+ *
+ * From 2009/11/25 commit 21378f58b604:
+ * "OptimoDE DESS" is ARM's semicustom DSPish stuff.
+ * Let's keep it as is, for the time being
+ */
+static const char *class_description[16] = {
+ [0x0] = "Generic verification component",
+ [0x1] = "ROM table",
+ [0x2] = "Reserved",
+ [0x3] = "Reserved",
+ [0x4] = "Reserved",
+ [0x5] = "Reserved",
+ [0x6] = "Reserved",
+ [0x7] = "Reserved",
+ [0x8] = "Reserved",
+ [0x9] = "CoreSight component",
+ [0xA] = "Reserved",
+ [0xB] = "Peripheral Test Block",
+ [0xC] = "Reserved",
+ [0xD] = "OptimoDE DESS", /* see above */
+ [0xE] = "Generic IP component",
+ [0xF] = "CoreLink, PrimeCell or System component",
+};
- /* DP initialization */
- dap_dp_read_reg(swjdp, &dummy, DP_CTRL_STAT);
- dap_dp_write_reg(swjdp, SSTICKYERR, DP_CTRL_STAT);
- dap_dp_read_reg(swjdp, &dummy, DP_CTRL_STAT);
+static const struct {
+ enum ap_type type;
+ const char *description;
+} ap_types[] = {
+ { AP_TYPE_JTAG_AP, "JTAG-AP" },
+ { AP_TYPE_COM_AP, "COM-AP" },
+ { AP_TYPE_AHB3_AP, "MEM-AP AHB3" },
+ { AP_TYPE_APB_AP, "MEM-AP APB2 or APB3" },
+ { AP_TYPE_AXI_AP, "MEM-AP AXI3 or AXI4" },
+ { AP_TYPE_AHB5_AP, "MEM-AP AHB5" },
+ { AP_TYPE_APB4_AP, "MEM-AP APB4" },
+ { AP_TYPE_AXI5_AP, "MEM-AP AXI5" },
+ { AP_TYPE_AHB5H_AP, "MEM-AP AHB5 with enhanced HPROT" },
+};
- swjdp->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
+static const char *ap_type_to_description(enum ap_type type)
+{
+ for (unsigned int i = 0; i < ARRAY_SIZE(ap_types); i++)
+ if (type == ap_types[i].type)
+ return ap_types[i].description;
- dap_dp_write_reg(swjdp, swjdp->dp_ctrl_stat, DP_CTRL_STAT);
- dap_dp_read_reg(swjdp, &ctrlstat, DP_CTRL_STAT);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- return retval;
+ return "Unknown";
+}
- /* Check that we have debug power domains activated */
- while (!(ctrlstat & CDBGPWRUPACK) && (cnt++ < 10))
- {
- LOG_DEBUG("DAP: wait CDBGPWRUPACK");
- dap_dp_read_reg(swjdp, &ctrlstat, DP_CTRL_STAT);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
+/*
+ * This function checks the ID for each access port to find the requested Access Port type
+ */
+int dap_find_ap(struct adiv5_dap *dap, enum ap_type type_to_find, struct adiv5_ap **ap_out)
+{
+ int ap_num;
+
+ /* Maximum AP number is 255 since the SELECT register is 8 bits */
+ for (ap_num = 0; ap_num <= DP_APSEL_MAX; ap_num++) {
+
+ /* read the IDR register of the Access Port */
+ uint32_t id_val = 0;
+
+ int retval = dap_queue_ap_read(dap_ap(dap, ap_num), AP_REG_IDR, &id_val);
+ if (retval != ERROR_OK)
return retval;
- alive_sleep(10);
+
+ retval = dap_run(dap);
+
+ /* Reading register for a non-existent AP should not cause an error,
+ * but just to be sure, try to continue searching if an error does happen.
+ */
+ if (retval == ERROR_OK && (id_val & AP_TYPE_MASK) == type_to_find) {
+ LOG_DEBUG("Found %s at AP index: %d (IDR=0x%08" PRIX32 ")",
+ ap_type_to_description(type_to_find),
+ ap_num, id_val);
+
+ *ap_out = &dap->ap[ap_num];
+ return ERROR_OK;
+ }
}
- while (!(ctrlstat & CSYSPWRUPACK) && (cnt++ < 10))
- {
- LOG_DEBUG("DAP: wait CSYSPWRUPACK");
- dap_dp_read_reg(swjdp, &ctrlstat, DP_CTRL_STAT);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
+ LOG_DEBUG("No %s found", ap_type_to_description(type_to_find));
+ return ERROR_FAIL;
+}
+
+int dap_get_debugbase(struct adiv5_ap *ap,
+ target_addr_t *dbgbase, uint32_t *apid)
+{
+ struct adiv5_dap *dap = ap->dap;
+ int retval;
+ uint32_t baseptr_upper, baseptr_lower;
+
+ if (ap->cfg_reg == MEM_AP_REG_CFG_INVALID) {
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_CFG, &ap->cfg_reg);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE, &baseptr_lower);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = dap_queue_ap_read(ap, AP_REG_IDR, apid);
+ if (retval != ERROR_OK)
+ return retval;
+ /* MEM_AP_REG_BASE64 is defined as 'RES0'; can be read and then ignored on 32 bits AP */
+ if (ap->cfg_reg == MEM_AP_REG_CFG_INVALID || is_64bit_ap(ap)) {
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE64, &baseptr_upper);
+ if (retval != ERROR_OK)
return retval;
- alive_sleep(10);
}
- dap_dp_read_reg(swjdp, &dummy, DP_CTRL_STAT);
- /* With debug power on we can activate OVERRUN checking */
- swjdp->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
- dap_dp_write_reg(swjdp, swjdp->dp_ctrl_stat, DP_CTRL_STAT);
- dap_dp_read_reg(swjdp, &dummy, DP_CTRL_STAT);
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
+ return retval;
- /*
- * REVISIT this isn't actually *initializing* anything in an AP,
- * and doesn't care if it's a MEM-AP at all (much less AHB-AP).
- * Should it? If the ROM address is valid, is this the right
- * place to scan the table and do any topology detection?
- */
- dap_ap_read_reg_u32(swjdp, AP_REG_IDR, &idreg);
- dap_ap_read_reg_u32(swjdp, AP_REG_BASE, &romaddr);
+ if (!is_64bit_ap(ap))
+ baseptr_upper = 0;
+ *dbgbase = (((target_addr_t)baseptr_upper) << 32) | baseptr_lower;
+
+ return ERROR_OK;
+}
+
+int dap_lookup_cs_component(struct adiv5_ap *ap,
+ target_addr_t dbgbase, uint8_t type, target_addr_t *addr, int32_t *idx)
+{
+ uint32_t romentry, entry_offset = 0, devtype;
+ target_addr_t component_base;
+ int retval;
+
+ dbgbase &= 0xFFFFFFFFFFFFF000ull;
+ *addr = 0;
+
+ do {
+ retval = mem_ap_read_atomic_u32(ap, dbgbase |
+ entry_offset, &romentry);
+ if (retval != ERROR_OK)
+ return retval;
+
+ component_base = dbgbase + (target_addr_t)(romentry & ARM_CS_ROMENTRY_OFFSET_MASK);
+
+ if (romentry & ARM_CS_ROMENTRY_PRESENT) {
+ uint32_t c_cid1;
+ retval = mem_ap_read_atomic_u32(ap, component_base + ARM_CS_CIDR1, &c_cid1);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Can't read component with base address " TARGET_ADDR_FMT
+ ", the corresponding core might be turned off", component_base);
+ return retval;
+ }
+ unsigned int class = (c_cid1 & ARM_CS_CIDR1_CLASS_MASK) >> ARM_CS_CIDR1_CLASS_SHIFT;
+ if (class == ARM_CS_CLASS_0X1_ROM_TABLE) {
+ retval = dap_lookup_cs_component(ap, component_base,
+ type, addr, idx);
+ if (retval == ERROR_OK)
+ break;
+ if (retval != ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
+ return retval;
+ }
+
+ retval = mem_ap_read_atomic_u32(ap, component_base + ARM_CS_C9_DEVTYPE, &devtype);
+ if (retval != ERROR_OK)
+ return retval;
+ if ((devtype & ARM_CS_C9_DEVTYPE_MASK) == type) {
+ if (!*idx) {
+ *addr = component_base;
+ break;
+ } else
+ (*idx)--;
+ }
+ }
+ entry_offset += 4;
+ } while ((romentry > 0) && (entry_offset < 0xf00));
+
+ if (!*addr)
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+
+ return ERROR_OK;
+}
+
+static int dap_read_part_id(struct adiv5_ap *ap, target_addr_t component_base, uint32_t *cid, uint64_t *pid)
+{
+ assert(IS_ALIGNED(component_base, ARM_CS_ALIGN));
+ assert(ap && cid && pid);
+
+ uint32_t cid0, cid1, cid2, cid3;
+ uint32_t pid0, pid1, pid2, pid3, pid4;
+ int retval;
+
+ /* IDs are in last 4K section */
+ retval = mem_ap_read_u32(ap, component_base + ARM_CS_PIDR0, &pid0);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + ARM_CS_PIDR1, &pid1);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + ARM_CS_PIDR2, &pid2);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + ARM_CS_PIDR3, &pid3);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + ARM_CS_PIDR4, &pid4);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + ARM_CS_CIDR0, &cid0);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + ARM_CS_CIDR1, &cid1);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + ARM_CS_CIDR2, &cid2);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_read_u32(ap, component_base + ARM_CS_CIDR3, &cid3);
+ if (retval != ERROR_OK)
+ return retval;
- LOG_DEBUG("MEM-AP #%d ID Register 0x%" PRIx32
- ", Debug ROM Address 0x%" PRIx32,
- swjdp->apsel, idreg, romaddr);
+ retval = dap_run(ap->dap);
+ if (retval != ERROR_OK)
+ return retval;
+
+ *cid = (cid3 & 0xff) << 24
+ | (cid2 & 0xff) << 16
+ | (cid1 & 0xff) << 8
+ | (cid0 & 0xff);
+ *pid = (uint64_t)(pid4 & 0xff) << 32
+ | (pid3 & 0xff) << 24
+ | (pid2 & 0xff) << 16
+ | (pid1 & 0xff) << 8
+ | (pid0 & 0xff);
return ERROR_OK;
}
-/* CID interpretation -- see ARM IHI 0029B section 3
- * and ARM IHI 0031A table 13-3.
+/* Part number interpretations are from Cortex
+ * core specs, the CoreSight components TRM
+ * (ARM DDI 0314H), CoreSight System Design
+ * Guide (ARM DGI 0012D) and ETM specs; also
+ * from chip observation (e.g. TI SDTI).
+ */
+
+/* The legacy code only used the part number field to identify CoreSight peripherals.
+ * This meant that the same part number from two different manufacturers looked the same.
+ * It is desirable for all future additions to identify with both part number and JEP106.
+ * "ANY_ID" is a wildcard (any JEP106) only to preserve legacy behavior for legacy entries.
*/
-static const char *class_description[16] ={
- "Reserved", "ROM table", "Reserved", "Reserved",
- "Reserved", "Reserved", "Reserved", "Reserved",
- "Reserved", "CoreSight component", "Reserved", "Peripheral Test Block",
- "Reserved", "OptimoDE DESS",
- "Generic IP component", "PrimeCell or System component"
+
+#define ANY_ID 0x1000
+
+static const struct dap_part_nums {
+ uint16_t designer_id;
+ uint16_t part_num;
+ const char *type;
+ const char *full;
+} dap_part_nums[] = {
+ { ARM_ID, 0x000, "Cortex-M3 SCS", "(System Control Space)", },
+ { ARM_ID, 0x001, "Cortex-M3 ITM", "(Instrumentation Trace Module)", },
+ { ARM_ID, 0x002, "Cortex-M3 DWT", "(Data Watchpoint and Trace)", },
+ { ARM_ID, 0x003, "Cortex-M3 FPB", "(Flash Patch and Breakpoint)", },
+ { ARM_ID, 0x008, "Cortex-M0 SCS", "(System Control Space)", },
+ { ARM_ID, 0x00a, "Cortex-M0 DWT", "(Data Watchpoint and Trace)", },
+ { ARM_ID, 0x00b, "Cortex-M0 BPU", "(Breakpoint Unit)", },
+ { ARM_ID, 0x00c, "Cortex-M4 SCS", "(System Control Space)", },
+ { ARM_ID, 0x00d, "CoreSight ETM11", "(Embedded Trace)", },
+ { ARM_ID, 0x00e, "Cortex-M7 FPB", "(Flash Patch and Breakpoint)", },
+ { ARM_ID, 0x193, "SoC-600 TSGEN", "(Timestamp Generator)", },
+ { ARM_ID, 0x470, "Cortex-M1 ROM", "(ROM Table)", },
+ { ARM_ID, 0x471, "Cortex-M0 ROM", "(ROM Table)", },
+ { ARM_ID, 0x490, "Cortex-A15 GIC", "(Generic Interrupt Controller)", },
+ { ARM_ID, 0x4a1, "Cortex-A53 ROM", "(v8 Memory Map ROM Table)", },
+ { ARM_ID, 0x4a2, "Cortex-A57 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4a3, "Cortex-A53 ROM", "(v7 Memory Map ROM Table)", },
+ { ARM_ID, 0x4a4, "Cortex-A72 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4a9, "Cortex-A9 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4aa, "Cortex-A35 ROM", "(v8 Memory Map ROM Table)", },
+ { ARM_ID, 0x4af, "Cortex-A15 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4b5, "Cortex-R5 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c0, "Cortex-M0+ ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c3, "Cortex-M3 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c4, "Cortex-M4 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c7, "Cortex-M7 PPB ROM", "(Private Peripheral Bus ROM Table)", },
+ { ARM_ID, 0x4c8, "Cortex-M7 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4e0, "Cortex-A35 ROM", "(v7 Memory Map ROM Table)", },
+ { ARM_ID, 0x4e4, "Cortex-A76 ROM", "(ROM Table)", },
+ { ARM_ID, 0x906, "CoreSight CTI", "(Cross Trigger)", },
+ { ARM_ID, 0x907, "CoreSight ETB", "(Trace Buffer)", },
+ { ARM_ID, 0x908, "CoreSight CSTF", "(Trace Funnel)", },
+ { ARM_ID, 0x909, "CoreSight ATBR", "(Advanced Trace Bus Replicator)", },
+ { ARM_ID, 0x910, "CoreSight ETM9", "(Embedded Trace)", },
+ { ARM_ID, 0x912, "CoreSight TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x913, "CoreSight ITM", "(Instrumentation Trace Macrocell)", },
+ { ARM_ID, 0x914, "CoreSight SWO", "(Single Wire Output)", },
+ { ARM_ID, 0x917, "CoreSight HTM", "(AHB Trace Macrocell)", },
+ { ARM_ID, 0x920, "CoreSight ETM11", "(Embedded Trace)", },
+ { ARM_ID, 0x921, "Cortex-A8 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x922, "Cortex-A8 CTI", "(Cross Trigger)", },
+ { ARM_ID, 0x923, "Cortex-M3 TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x924, "Cortex-M3 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x925, "Cortex-M4 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x930, "Cortex-R4 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x931, "Cortex-R5 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x932, "CoreSight MTB-M0+", "(Micro Trace Buffer)", },
+ { ARM_ID, 0x941, "CoreSight TPIU-Lite", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x950, "Cortex-A9 PTM", "(Program Trace Macrocell)", },
+ { ARM_ID, 0x955, "Cortex-A5 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95a, "Cortex-A72 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95b, "Cortex-A17 PTM", "(Program Trace Macrocell)", },
+ { ARM_ID, 0x95d, "Cortex-A53 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95e, "Cortex-A57 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95f, "Cortex-A15 PTM", "(Program Trace Macrocell)", },
+ { ARM_ID, 0x961, "CoreSight TMC", "(Trace Memory Controller)", },
+ { ARM_ID, 0x962, "CoreSight STM", "(System Trace Macrocell)", },
+ { ARM_ID, 0x975, "Cortex-M7 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x9a0, "CoreSight PMU", "(Performance Monitoring Unit)", },
+ { ARM_ID, 0x9a1, "Cortex-M4 TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x9a4, "CoreSight GPR", "(Granular Power Requester)", },
+ { ARM_ID, 0x9a5, "Cortex-A5 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9a7, "Cortex-A7 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9a8, "Cortex-A53 CTI", "(Cross Trigger)", },
+ { ARM_ID, 0x9a9, "Cortex-M7 TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x9ae, "Cortex-A17 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9af, "Cortex-A15 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9b7, "Cortex-R7 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9d3, "Cortex-A53 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9d7, "Cortex-A57 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9d8, "Cortex-A72 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9da, "Cortex-A35 PMU/CTI/ETM", "(Performance Monitor Unit/Cross Trigger/ETM)", },
+ { ARM_ID, 0x9e2, "SoC-600 APB-AP", "(APB4 Memory Access Port)", },
+ { ARM_ID, 0x9e3, "SoC-600 AHB-AP", "(AHB5 Memory Access Port)", },
+ { ARM_ID, 0x9e4, "SoC-600 AXI-AP", "(AXI Memory Access Port)", },
+ { ARM_ID, 0x9e5, "SoC-600 APv1 Adapter", "(Access Port v1 Adapter)", },
+ { ARM_ID, 0x9e6, "SoC-600 JTAG-AP", "(JTAG Access Port)", },
+ { ARM_ID, 0x9e7, "SoC-600 TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x9e8, "SoC-600 TMC ETR/ETS", "(Embedded Trace Router/Streamer)", },
+ { ARM_ID, 0x9e9, "SoC-600 TMC ETB", "(Embedded Trace Buffer)", },
+ { ARM_ID, 0x9ea, "SoC-600 TMC ETF", "(Embedded Trace FIFO)", },
+ { ARM_ID, 0x9eb, "SoC-600 ATB Funnel", "(Trace Funnel)", },
+ { ARM_ID, 0x9ec, "SoC-600 ATB Replicator", "(Trace Replicator)", },
+ { ARM_ID, 0x9ed, "SoC-600 CTI", "(Cross Trigger)", },
+ { ARM_ID, 0x9ee, "SoC-600 CATU", "(Address Translation Unit)", },
+ { ARM_ID, 0xc05, "Cortex-A5 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc07, "Cortex-A7 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc08, "Cortex-A8 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc09, "Cortex-A9 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc0e, "Cortex-A17 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc0f, "Cortex-A15 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc14, "Cortex-R4 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc15, "Cortex-R5 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc17, "Cortex-R7 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd03, "Cortex-A53 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd04, "Cortex-A35 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd07, "Cortex-A57 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd08, "Cortex-A72 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd0b, "Cortex-A76 Debug", "(Debug Unit)", },
+ { 0x017, 0x9af, "MSP432 ROM", "(ROM Table)" },
+ { 0x01f, 0xcd0, "Atmel CPU with DSU", "(CPU)" },
+ { 0x041, 0x1db, "XMC4500 ROM", "(ROM Table)" },
+ { 0x041, 0x1df, "XMC4700/4800 ROM", "(ROM Table)" },
+ { 0x041, 0x1ed, "XMC1000 ROM", "(ROM Table)" },
+ { 0x065, 0x000, "SHARC+/Blackfin+", "", },
+ { 0x070, 0x440, "Qualcomm QDSS Component v1", "(Qualcomm Designed CoreSight Component v1)", },
+ { 0x0bf, 0x100, "Brahma-B53 Debug", "(Debug Unit)", },
+ { 0x0bf, 0x9d3, "Brahma-B53 PMU", "(Performance Monitor Unit)", },
+ { 0x0bf, 0x4a1, "Brahma-B53 ROM", "(ROM Table)", },
+ { 0x0bf, 0x721, "Brahma-B53 ROM", "(ROM Table)", },
+ { 0x1eb, 0x181, "Tegra 186 ROM", "(ROM Table)", },
+ { 0x1eb, 0x202, "Denver ETM", "(Denver Embedded Trace)", },
+ { 0x1eb, 0x211, "Tegra 210 ROM", "(ROM Table)", },
+ { 0x1eb, 0x302, "Denver Debug", "(Debug Unit)", },
+ { 0x1eb, 0x402, "Denver PMU", "(Performance Monitor Unit)", },
+ /* legacy comment: 0x113: what? */
+ { ANY_ID, 0x120, "TI SDTI", "(System Debug Trace Interface)", }, /* from OMAP3 memmap */
+ { ANY_ID, 0x343, "TI DAPCTL", "", }, /* from OMAP3 memmap */
};
-static bool
-is_dap_cid_ok(uint32_t cid3, uint32_t cid2, uint32_t cid1, uint32_t cid0)
+static const struct dap_part_nums *pidr_to_part_num(unsigned int designer_id, unsigned int part_num)
{
- return cid3 == 0xb1 && cid2 == 0x05
- && ((cid1 & 0x0f) == 0) && cid0 == 0x0d;
+ static const struct dap_part_nums unknown = {
+ .type = "Unrecognized",
+ .full = "",
+ };
+
+ for (unsigned int i = 0; i < ARRAY_SIZE(dap_part_nums); i++) {
+ if (dap_part_nums[i].designer_id != designer_id && dap_part_nums[i].designer_id != ANY_ID)
+ continue;
+ if (dap_part_nums[i].part_num == part_num)
+ return &dap_part_nums[i];
+ }
+ return &unknown;
+}
+
+static int dap_devtype_display(struct command_invocation *cmd, uint32_t devtype)
+{
+ const char *major = "Reserved", *subtype = "Reserved";
+ const unsigned int minor = (devtype & ARM_CS_C9_DEVTYPE_SUB_MASK) >> ARM_CS_C9_DEVTYPE_SUB_SHIFT;
+ const unsigned int devtype_major = (devtype & ARM_CS_C9_DEVTYPE_MAJOR_MASK) >> ARM_CS_C9_DEVTYPE_MAJOR_SHIFT;
+ switch (devtype_major) {
+ case 0:
+ major = "Miscellaneous";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 4:
+ subtype = "Validation component";
+ break;
+ }
+ break;
+ case 1:
+ major = "Trace Sink";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Port";
+ break;
+ case 2:
+ subtype = "Buffer";
+ break;
+ case 3:
+ subtype = "Router";
+ break;
+ }
+ break;
+ case 2:
+ major = "Trace Link";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Funnel, router";
+ break;
+ case 2:
+ subtype = "Filter";
+ break;
+ case 3:
+ subtype = "FIFO, buffer";
+ break;
+ }
+ break;
+ case 3:
+ major = "Trace Source";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Processor";
+ break;
+ case 2:
+ subtype = "DSP";
+ break;
+ case 3:
+ subtype = "Engine/Coprocessor";
+ break;
+ case 4:
+ subtype = "Bus";
+ break;
+ case 6:
+ subtype = "Software";
+ break;
+ }
+ break;
+ case 4:
+ major = "Debug Control";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Trigger Matrix";
+ break;
+ case 2:
+ subtype = "Debug Auth";
+ break;
+ case 3:
+ subtype = "Power Requestor";
+ break;
+ }
+ break;
+ case 5:
+ major = "Debug Logic";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Processor";
+ break;
+ case 2:
+ subtype = "DSP";
+ break;
+ case 3:
+ subtype = "Engine/Coprocessor";
+ break;
+ case 4:
+ subtype = "Bus";
+ break;
+ case 5:
+ subtype = "Memory";
+ break;
+ }
+ break;
+ case 6:
+ major = "Performance Monitor";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Processor";
+ break;
+ case 2:
+ subtype = "DSP";
+ break;
+ case 3:
+ subtype = "Engine/Coprocessor";
+ break;
+ case 4:
+ subtype = "Bus";
+ break;
+ case 5:
+ subtype = "Memory";
+ break;
+ }
+ break;
+ }
+ command_print(cmd, "\t\tType is 0x%02x, %s, %s",
+ devtype & ARM_CS_C9_DEVTYPE_MASK,
+ major, subtype);
+ return ERROR_OK;
}
-int dap_info_command(struct command_context *cmd_ctx,
- struct swjdp_common *swjdp, int apsel)
+static int dap_rom_display(struct command_invocation *cmd,
+ struct adiv5_ap *ap, target_addr_t dbgbase, int depth)
{
+ int retval;
+ uint64_t pid;
+ uint32_t cid;
+ char tabs[16] = "";
- uint32_t dbgbase, apid;
- int romtable_present = 0;
- uint8_t mem_ap;
- uint32_t apselold;
+ if (depth > 16) {
+ command_print(cmd, "\tTables too deep");
+ return ERROR_FAIL;
+ }
- /* AP address is in bits 31:24 of DP_SELECT */
- if (apsel >= 256)
- return ERROR_INVALID_ARGUMENTS;
-
- apselold = swjdp->apsel;
- dap_ap_select(swjdp, apsel);
- dap_ap_read_reg_u32(swjdp, AP_REG_BASE, &dbgbase);
- dap_ap_read_reg_u32(swjdp, AP_REG_IDR, &apid);
- jtagdp_transaction_endcheck(swjdp);
- /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
- mem_ap = ((apid&0x10000) && ((apid&0x0F) != 0));
- command_print(cmd_ctx, "AP ID register 0x%8.8" PRIx32, apid);
- if (apid)
- {
- switch (apid&0x0F)
- {
- case 0:
- command_print(cmd_ctx, "\tType is JTAG-AP");
- break;
- case 1:
- command_print(cmd_ctx, "\tType is MEM-AP AHB");
- break;
- case 2:
- command_print(cmd_ctx, "\tType is MEM-AP APB");
- break;
- default:
- command_print(cmd_ctx, "\tUnknown AP type");
+ if (depth)
+ snprintf(tabs, sizeof(tabs), "[L%02d] ", depth);
+
+ target_addr_t base_addr = dbgbase & 0xFFFFFFFFFFFFF000ull;
+ command_print(cmd, "\t\tComponent base address " TARGET_ADDR_FMT, base_addr);
+
+ retval = dap_read_part_id(ap, base_addr, &cid, &pid);
+ if (retval != ERROR_OK) {
+ command_print(cmd, "\t\tCan't read component, the corresponding core might be turned off");
+ return ERROR_OK; /* Don't abort recursion */
+ }
+
+ if (!is_valid_arm_cs_cidr(cid)) {
+ command_print(cmd, "\t\tInvalid CID 0x%08" PRIx32, cid);
+ return ERROR_OK; /* Don't abort recursion */
+ }
+
+ /* component may take multiple 4K pages */
+ uint32_t size = ARM_CS_PIDR_SIZE(pid);
+ if (size > 0)
+ command_print(cmd, "\t\tStart address " TARGET_ADDR_FMT, base_addr - 0x1000 * size);
+
+ command_print(cmd, "\t\tPeripheral ID 0x%010" PRIx64, pid);
+
+ const unsigned int class = (cid & ARM_CS_CIDR_CLASS_MASK) >> ARM_CS_CIDR_CLASS_SHIFT;
+ const unsigned int part_num = ARM_CS_PIDR_PART(pid);
+ unsigned int designer_id = ARM_CS_PIDR_DESIGNER(pid);
+
+ if (pid & ARM_CS_PIDR_JEDEC) {
+ /* JEP106 code */
+ command_print(cmd, "\t\tDesigner is 0x%03x, %s",
+ designer_id, jep106_manufacturer(designer_id));
+ } else {
+ /* Legacy ASCII ID, clear invalid bits */
+ designer_id &= 0x7f;
+ command_print(cmd, "\t\tDesigner ASCII code 0x%02x, %s",
+ designer_id, designer_id == 0x41 ? "ARM" : "<unknown>");
+ }
+
+ const struct dap_part_nums *partnum = pidr_to_part_num(designer_id, part_num);
+ command_print(cmd, "\t\tPart is 0x%03x, %s %s", part_num, partnum->type, partnum->full);
+ command_print(cmd, "\t\tComponent class is 0x%x, %s", class, class_description[class]);
+
+ if (class == ARM_CS_CLASS_0X1_ROM_TABLE) {
+ uint32_t memtype;
+ retval = mem_ap_read_atomic_u32(ap, base_addr + ARM_CS_C1_MEMTYPE, &memtype);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (memtype & ARM_CS_C1_MEMTYPE_SYSMEM_MASK)
+ command_print(cmd, "\t\tMEMTYPE system memory present on bus");
+ else
+ command_print(cmd, "\t\tMEMTYPE system memory not present: dedicated debug bus");
+
+ /* Read ROM table entries from base address until we get 0x00000000 or reach the reserved area */
+ for (uint16_t entry_offset = 0; entry_offset < 0xF00; entry_offset += 4) {
+ uint32_t romentry;
+ retval = mem_ap_read_atomic_u32(ap, base_addr | entry_offset, &romentry);
+ if (retval != ERROR_OK)
+ return retval;
+ command_print(cmd, "\t%sROMTABLE[0x%x] = 0x%" PRIx32 "",
+ tabs, entry_offset, romentry);
+ if (romentry & ARM_CS_ROMENTRY_PRESENT) {
+ /* Recurse. "romentry" is signed */
+ retval = dap_rom_display(cmd, ap, base_addr + (int32_t)(romentry & ARM_CS_ROMENTRY_OFFSET_MASK),
+ depth + 1);
+ if (retval != ERROR_OK)
+ return retval;
+ } else if (romentry != 0) {
+ command_print(cmd, "\t\tComponent not present");
+ } else {
+ command_print(cmd, "\t%s\tEnd of ROM table", tabs);
break;
+ }
}
+ } else if (class == ARM_CS_CLASS_0X9_CS_COMPONENT) {
+ uint32_t devtype;
+ retval = mem_ap_read_atomic_u32(ap, base_addr + ARM_CS_C9_DEVTYPE, &devtype);
+ if (retval != ERROR_OK)
+ return retval;
- /* NOTE: a MEM-AP may have a single CoreSight component that's
- * not a ROM table ... or have no such components at all.
- */
- if (mem_ap)
- command_print(cmd_ctx, "AP BASE 0x%8.8" PRIx32,
- dbgbase);
+ retval = dap_devtype_display(cmd, devtype);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* REVISIT also show ARM_CS_C9_DEVID */
}
- else
- {
- command_print(cmd_ctx, "No AP found at this apsel 0x%x", apsel);
+
+ return ERROR_OK;
+}
+
+int dap_info_command(struct command_invocation *cmd,
+ struct adiv5_ap *ap)
+{
+ int retval;
+ uint32_t apid;
+ target_addr_t dbgbase;
+ target_addr_t dbgaddr;
+
+ /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
+ retval = dap_get_debugbase(ap, &dbgbase, &apid);
+ if (retval != ERROR_OK)
+ return retval;
+
+ command_print(cmd, "AP ID register 0x%8.8" PRIx32, apid);
+ if (apid == 0) {
+ command_print(cmd, "No AP found at this ap 0x%x", ap->ap_num);
+ return ERROR_FAIL;
}
- romtable_present = ((mem_ap) && (dbgbase != 0xFFFFFFFF));
- if (romtable_present)
- {
- uint32_t cid0,cid1,cid2,cid3,memtype,romentry;
- uint16_t entry_offset;
+ command_print(cmd, "\tType is %s", ap_type_to_description(apid & AP_TYPE_MASK));
- /* bit 16 of apid indicates a memory access port */
- if (dbgbase & 0x02)
- command_print(cmd_ctx, "\tValid ROM table present");
- else
- command_print(cmd_ctx, "\tROM table in legacy format");
-
- /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
- mem_ap_read_u32(swjdp, (dbgbase&0xFFFFF000) | 0xFF0, &cid0);
- mem_ap_read_u32(swjdp, (dbgbase&0xFFFFF000) | 0xFF4, &cid1);
- mem_ap_read_u32(swjdp, (dbgbase&0xFFFFF000) | 0xFF8, &cid2);
- mem_ap_read_u32(swjdp, (dbgbase&0xFFFFF000) | 0xFFC, &cid3);
- mem_ap_read_u32(swjdp, (dbgbase&0xFFFFF000) | 0xFCC, &memtype);
- jtagdp_transaction_endcheck(swjdp);
- if (!is_dap_cid_ok(cid3, cid2, cid1, cid0))
- command_print(cmd_ctx, "\tCID3 0x%2.2" PRIx32
- ", CID2 0x%2.2" PRIx32
- ", CID1 0x%2.2" PRIx32
- ", CID0 0x%2.2" PRIx32,
- cid3, cid2, cid1, cid0);
- if (memtype & 0x01)
- command_print(cmd_ctx, "\tMEMTYPE system memory present on bus");
+ /* NOTE: a MEM-AP may have a single CoreSight component that's
+ * not a ROM table ... or have no such components at all.
+ */
+ const unsigned int class = (apid & AP_REG_IDR_CLASS_MASK) >> AP_REG_IDR_CLASS_SHIFT;
+
+ if (class == AP_REG_IDR_CLASS_MEM_AP) {
+ if (is_64bit_ap(ap))
+ dbgaddr = 0xFFFFFFFFFFFFFFFFull;
else
- command_print(cmd_ctx, "\tMEMTYPE System memory not present. "
- "Dedicated debug bus.");
-
- /* Now we read ROM table entries from dbgbase&0xFFFFF000) | 0x000 until we get 0x00000000 */
- entry_offset = 0;
- do
- {
- mem_ap_read_atomic_u32(swjdp, (dbgbase&0xFFFFF000) | entry_offset, &romentry);
- command_print(cmd_ctx, "\tROMTABLE[0x%x] = 0x%" PRIx32 "",entry_offset,romentry);
- if (romentry&0x01)
- {
- uint32_t c_cid0, c_cid1, c_cid2, c_cid3;
- uint32_t c_pid0, c_pid1, c_pid2, c_pid3, c_pid4;
- uint32_t component_start, component_base;
- unsigned part_num;
- char *type, *full;
-
- component_base = (uint32_t)((dbgbase & 0xFFFFF000)
- + (int)(romentry & 0xFFFFF000));
- mem_ap_read_atomic_u32(swjdp,
- (component_base & 0xFFFFF000) | 0xFE0, &c_pid0);
- mem_ap_read_atomic_u32(swjdp,
- (component_base & 0xFFFFF000) | 0xFE4, &c_pid1);
- mem_ap_read_atomic_u32(swjdp,
- (component_base & 0xFFFFF000) | 0xFE8, &c_pid2);
- mem_ap_read_atomic_u32(swjdp,
- (component_base & 0xFFFFF000) | 0xFEC, &c_pid3);
- mem_ap_read_atomic_u32(swjdp,
- (component_base & 0xFFFFF000) | 0xFD0, &c_pid4);
- mem_ap_read_atomic_u32(swjdp,
- (component_base & 0xFFFFF000) | 0xFF0, &c_cid0);
- mem_ap_read_atomic_u32(swjdp,
- (component_base & 0xFFFFF000) | 0xFF4, &c_cid1);
- mem_ap_read_atomic_u32(swjdp,
- (component_base & 0xFFFFF000) | 0xFF8, &c_cid2);
- mem_ap_read_atomic_u32(swjdp,
- (component_base & 0xFFFFF000) | 0xFFC, &c_cid3);
- component_start = component_base - 0x1000*(c_pid4 >> 4);
-
- command_print(cmd_ctx, "\t\tComponent base address 0x%" PRIx32
- ", start address 0x%" PRIx32,
- component_base, component_start);
- command_print(cmd_ctx, "\t\tComponent class is 0x%x, %s",
- (int) (c_cid1 >> 4) & 0xf,
- /* See ARM IHI 0029B Table 3-3 */
- class_description[(c_cid1 >> 4) & 0xf]);
-
- /* CoreSight component? */
- if (((c_cid1 >> 4) & 0x0f) == 9) {
- uint32_t devtype;
- unsigned minor;
- char *major = "Reserved", *subtype = "Reserved";
-
- mem_ap_read_atomic_u32(swjdp,
- (component_base & 0xfffff000) | 0xfcc,
- &devtype);
- minor = (devtype >> 4) & 0x0f;
- switch (devtype & 0x0f) {
- case 0:
- major = "Miscellaneous";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 4:
- subtype = "Validation component";
- break;
- }
- break;
- case 1:
- major = "Trace Sink";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Port";
- break;
- case 2:
- subtype = "Buffer";
- break;
- }
- break;
- case 2:
- major = "Trace Link";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Funnel, router";
- break;
- case 2:
- subtype = "Filter";
- break;
- case 3:
- subtype = "FIFO, buffer";
- break;
- }
- break;
- case 3:
- major = "Trace Source";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Processor";
- break;
- case 2:
- subtype = "DSP";
- break;
- case 3:
- subtype = "Engine/Coprocessor";
- break;
- case 4:
- subtype = "Bus";
- break;
- }
- break;
- case 4:
- major = "Debug Control";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Trigger Matrix";
- break;
- case 2:
- subtype = "Debug Auth";
- break;
- }
- break;
- case 5:
- major = "Debug Logic";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Processor";
- break;
- case 2:
- subtype = "DSP";
- break;
- case 3:
- subtype = "Engine/Coprocessor";
- break;
- }
- break;
- }
- command_print(cmd_ctx, "\t\tType is 0x%2.2x, %s, %s",
- (unsigned) (devtype & 0xff),
- major, subtype);
- /* REVISIT also show 0xfc8 DevId */
- }
-
- if (!is_dap_cid_ok(cid3, cid2, cid1, cid0))
- command_print(cmd_ctx, "\t\tCID3 0x%2.2" PRIx32
- ", CID2 0x%2.2" PRIx32
- ", CID1 0x%2.2" PRIx32
- ", CID0 0x%2.2" PRIx32,
- c_cid3, c_cid2, c_cid1, c_cid0);
- command_print(cmd_ctx, "\t\tPeripheral ID[4..0] = hex "
- "%2.2x %2.2x %2.2x %2.2x %2.2x",
- (int) c_pid4,
- (int) c_pid3, (int) c_pid2,
- (int) c_pid1, (int) c_pid0);
-
- /* Part number interpretations are from Cortex
- * core specs, the CoreSight components TRM
- * (ARM DDI 0314H), and ETM specs; also from
- * chip observation (e.g. TI SDTI).
- */
- part_num = c_pid0 & 0xff;
- part_num |= (c_pid1 & 0x0f) << 8;
- switch (part_num) {
- case 0x000:
- type = "Cortex-M3 NVIC";
- full = "(Interrupt Controller)";
- break;
- case 0x001:
- type = "Cortex-M3 ITM";
- full = "(Instrumentation Trace Module)";
- break;
- case 0x002:
- type = "Cortex-M3 DWT";
- full = "(Data Watchpoint and Trace)";
- break;
- case 0x003:
- type = "Cortex-M3 FBP";
- full = "(Flash Patch and Breakpoint)";
- break;
- case 0x00d:
- type = "CoreSight ETM11";
- full = "(Embedded Trace)";
- break;
- // case 0x113: what?
- case 0x120: /* from OMAP3 memmap */
- type = "TI SDTI";
- full = "(System Debug Trace Interface)";
- break;
- case 0x343: /* from OMAP3 memmap */
- type = "TI DAPCTL";
- full = "";
- break;
- case 0x906:
- type = "Coresight CTI";
- full = "(Cross Trigger)";
- break;
- case 0x907:
- type = "Coresight ETB";
- full = "(Trace Buffer)";
- break;
- case 0x908:
- type = "Coresight CSTF";
- full = "(Trace Funnel)";
- break;
- case 0x910:
- type = "CoreSight ETM9";
- full = "(Embedded Trace)";
- break;
- case 0x912:
- type = "Coresight TPIU";
- full = "(Trace Port Interface Unit)";
- break;
- case 0x921:
- type = "Cortex-A8 ETM";
- full = "(Embedded Trace)";
- break;
- case 0x922:
- type = "Cortex-A8 CTI";
- full = "(Cross Trigger)";
- break;
- case 0x923:
- type = "Cortex-M3 TPIU";
- full = "(Trace Port Interface Unit)";
- break;
- case 0x924:
- type = "Cortex-M3 ETM";
- full = "(Embedded Trace)";
- break;
- case 0xc08:
- type = "Cortex-A8 Debug";
- full = "(Debug Unit)";
- break;
- default:
- type = "-*- unrecognized -*-";
- full = "";
- break;
- }
- command_print(cmd_ctx, "\t\tPart is %s %s",
- type, full);
- }
+ dbgaddr = 0xFFFFFFFFul;
+
+ command_print(cmd, "MEM-AP BASE " TARGET_ADDR_FMT, dbgbase);
+
+ if (dbgbase == dbgaddr || (dbgbase & 0x3) == 0x2) {
+ command_print(cmd, "\tNo ROM table present");
+ } else {
+ if (dbgbase & 0x01)
+ command_print(cmd, "\tValid ROM table present");
else
- {
- if (romentry)
- command_print(cmd_ctx, "\t\tComponent not present");
- else
- command_print(cmd_ctx, "\t\tEnd of ROM table");
+ command_print(cmd, "\tROM table in legacy format");
+
+ dap_rom_display(cmd, ap, dbgbase & 0xFFFFFFFFFFFFF000ull, 0);
+ }
+ }
+
+ return ERROR_OK;
+}
+
+enum adiv5_cfg_param {
+ CFG_DAP,
+ CFG_AP_NUM,
+ CFG_BASEADDR,
+ CFG_CTIBASE, /* DEPRECATED */
+};
+
+static const struct jim_nvp nvp_config_opts[] = {
+ { .name = "-dap", .value = CFG_DAP },
+ { .name = "-ap-num", .value = CFG_AP_NUM },
+ { .name = "-baseaddr", .value = CFG_BASEADDR },
+ { .name = "-ctibase", .value = CFG_CTIBASE }, /* DEPRECATED */
+ { .name = NULL, .value = -1 }
+};
+
+static int adiv5_jim_spot_configure(struct jim_getopt_info *goi,
+ struct adiv5_dap **dap_p, int *ap_num_p, uint32_t *base_p)
+{
+ if (!goi->argc)
+ return JIM_OK;
+
+ Jim_SetEmptyResult(goi->interp);
+
+ struct jim_nvp *n;
+ int e = jim_nvp_name2value_obj(goi->interp, nvp_config_opts,
+ goi->argv[0], &n);
+ if (e != JIM_OK)
+ return JIM_CONTINUE;
+
+ /* base_p can be NULL, then '-baseaddr' option is treated as unknown */
+ if (!base_p && (n->value == CFG_BASEADDR || n->value == CFG_CTIBASE))
+ return JIM_CONTINUE;
+
+ e = jim_getopt_obj(goi, NULL);
+ if (e != JIM_OK)
+ return e;
+
+ switch (n->value) {
+ case CFG_DAP:
+ if (goi->isconfigure) {
+ Jim_Obj *o_t;
+ struct adiv5_dap *dap;
+ e = jim_getopt_obj(goi, &o_t);
+ if (e != JIM_OK)
+ return e;
+ dap = dap_instance_by_jim_obj(goi->interp, o_t);
+ if (!dap) {
+ Jim_SetResultString(goi->interp, "DAP name invalid!", -1);
+ return JIM_ERR;
}
- entry_offset += 4;
- } while (romentry > 0);
+ if (*dap_p && *dap_p != dap) {
+ Jim_SetResultString(goi->interp,
+ "DAP assignment cannot be changed!", -1);
+ return JIM_ERR;
+ }
+ *dap_p = dap;
+ } else {
+ if (goi->argc)
+ goto err_no_param;
+ if (!*dap_p) {
+ Jim_SetResultString(goi->interp, "DAP not configured", -1);
+ return JIM_ERR;
+ }
+ Jim_SetResultString(goi->interp, adiv5_dap_name(*dap_p), -1);
+ }
+ break;
+
+ case CFG_AP_NUM:
+ if (goi->isconfigure) {
+ jim_wide ap_num;
+ e = jim_getopt_wide(goi, &ap_num);
+ if (e != JIM_OK)
+ return e;
+ if (ap_num < 0 || ap_num > DP_APSEL_MAX) {
+ Jim_SetResultString(goi->interp, "Invalid AP number!", -1);
+ return JIM_ERR;
+ }
+ *ap_num_p = ap_num;
+ } else {
+ if (goi->argc)
+ goto err_no_param;
+ if (*ap_num_p == DP_APSEL_INVALID) {
+ Jim_SetResultString(goi->interp, "AP number not configured", -1);
+ return JIM_ERR;
+ }
+ Jim_SetResult(goi->interp, Jim_NewIntObj(goi->interp, *ap_num_p));
+ }
+ break;
+
+ case CFG_CTIBASE:
+ LOG_WARNING("DEPRECATED! use \'-baseaddr' not \'-ctibase\'");
+ /* fall through */
+ case CFG_BASEADDR:
+ if (goi->isconfigure) {
+ jim_wide base;
+ e = jim_getopt_wide(goi, &base);
+ if (e != JIM_OK)
+ return e;
+ *base_p = (uint32_t)base;
+ } else {
+ if (goi->argc)
+ goto err_no_param;
+ Jim_SetResult(goi->interp, Jim_NewIntObj(goi->interp, *base_p));
+ }
+ break;
+ };
+
+ return JIM_OK;
+
+err_no_param:
+ Jim_WrongNumArgs(goi->interp, goi->argc, goi->argv, "NO PARAMS");
+ return JIM_ERR;
+}
+
+int adiv5_jim_configure(struct target *target, struct jim_getopt_info *goi)
+{
+ struct adiv5_private_config *pc;
+ int e;
+
+ pc = (struct adiv5_private_config *)target->private_config;
+ if (!pc) {
+ pc = calloc(1, sizeof(struct adiv5_private_config));
+ pc->ap_num = DP_APSEL_INVALID;
+ target->private_config = pc;
}
- else
- {
- command_print(cmd_ctx, "\tNo ROM table present");
+
+ target->has_dap = true;
+
+ e = adiv5_jim_spot_configure(goi, &pc->dap, &pc->ap_num, NULL);
+ if (e != JIM_OK)
+ return e;
+
+ if (pc->dap && !target->dap_configured) {
+ if (target->tap_configured) {
+ pc->dap = NULL;
+ Jim_SetResultString(goi->interp,
+ "-chain-position and -dap configparams are mutually exclusive!", -1);
+ return JIM_ERR;
+ }
+ target->tap = pc->dap->tap;
+ target->dap_configured = true;
}
- dap_ap_select(swjdp, apselold);
+
+ return JIM_OK;
+}
+
+int adiv5_verify_config(struct adiv5_private_config *pc)
+{
+ if (!pc)
+ return ERROR_FAIL;
+
+ if (!pc->dap)
+ return ERROR_FAIL;
return ERROR_OK;
}
-DAP_COMMAND_HANDLER(dap_baseaddr_command)
+int adiv5_jim_mem_ap_spot_configure(struct adiv5_mem_ap_spot *cfg,
+ struct jim_getopt_info *goi)
+{
+ return adiv5_jim_spot_configure(goi, &cfg->dap, &cfg->ap_num, &cfg->base);
+}
+
+int adiv5_mem_ap_spot_init(struct adiv5_mem_ap_spot *p)
{
- uint32_t apsel, apselsave, baseaddr;
+ p->dap = NULL;
+ p->ap_num = DP_APSEL_INVALID;
+ p->base = 0;
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_dap_info_command)
+{
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint32_t apsel;
+
+ switch (CMD_ARGC) {
+ case 0:
+ apsel = dap->apsel;
+ break;
+ case 1:
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
+ if (apsel > DP_APSEL_MAX) {
+ command_print(CMD, "Invalid AP number");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+ break;
+ default:
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ return dap_info_command(CMD, &dap->ap[apsel]);
+}
+
+COMMAND_HANDLER(dap_baseaddr_command)
+{
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint32_t apsel, baseaddr_lower, baseaddr_upper;
+ struct adiv5_ap *ap;
+ target_addr_t baseaddr;
int retval;
- apselsave = swjdp->apsel;
+ baseaddr_upper = 0;
+
switch (CMD_ARGC) {
case 0:
- apsel = swjdp->apsel;
+ apsel = dap->apsel;
break;
case 1:
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
/* AP address is in bits 31:24 of DP_SELECT */
- if (apsel >= 256)
- return ERROR_INVALID_ARGUMENTS;
+ if (apsel > DP_APSEL_MAX) {
+ command_print(CMD, "Invalid AP number");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- if (apselsave != apsel)
- dap_ap_select(swjdp, apsel);
-
/* NOTE: assumes we're talking to a MEM-AP, which
* has a base address. There are other kinds of AP,
* though they're not common for now. This should
* use the ID register to verify it's a MEM-AP.
*/
- dap_ap_read_reg_u32(swjdp, AP_REG_BASE, &baseaddr);
- retval = jtagdp_transaction_endcheck(swjdp);
- command_print(CMD_CTX, "0x%8.8" PRIx32, baseaddr);
- if (apselsave != apsel)
- dap_ap_select(swjdp, apselsave);
+ ap = dap_ap(dap, apsel);
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE, &baseaddr_lower);
- return retval;
+ if (retval == ERROR_OK && ap->cfg_reg == MEM_AP_REG_CFG_INVALID)
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_CFG, &ap->cfg_reg);
+
+ if (retval == ERROR_OK && (ap->cfg_reg == MEM_AP_REG_CFG_INVALID || is_64bit_ap(ap))) {
+ /* MEM_AP_REG_BASE64 is defined as 'RES0'; can be read and then ignored on 32 bits AP */
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE64, &baseaddr_upper);
+ }
+
+ if (retval == ERROR_OK)
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (is_64bit_ap(ap)) {
+ baseaddr = (((target_addr_t)baseaddr_upper) << 32) | baseaddr_lower;
+ command_print(CMD, "0x%016" PRIx64, baseaddr);
+ } else
+ command_print(CMD, "0x%08" PRIx32, baseaddr_lower);
+
+ return ERROR_OK;
}
-DAP_COMMAND_HANDLER(dap_memaccess_command)
+COMMAND_HANDLER(dap_memaccess_command)
{
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
uint32_t memaccess_tck;
switch (CMD_ARGC) {
case 0:
- memaccess_tck = swjdp->memaccess_tck;
+ memaccess_tck = dap->ap[dap->apsel].memaccess_tck;
break;
case 1:
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], memaccess_tck);
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- swjdp->memaccess_tck = memaccess_tck;
+ dap->ap[dap->apsel].memaccess_tck = memaccess_tck;
- command_print(CMD_CTX, "memory bus access delay set to %" PRIi32 " tck",
- swjdp->memaccess_tck);
+ command_print(CMD, "memory bus access delay set to %" PRIu32 " tck",
+ dap->ap[dap->apsel].memaccess_tck);
return ERROR_OK;
}
-DAP_COMMAND_HANDLER(dap_apsel_command)
+COMMAND_HANDLER(dap_apsel_command)
{
- uint32_t apsel, apid;
- int retval;
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint32_t apsel;
switch (CMD_ARGC) {
case 0:
- apsel = 0;
- break;
+ command_print(CMD, "%" PRIu32, dap->apsel);
+ return ERROR_OK;
case 1:
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
/* AP address is in bits 31:24 of DP_SELECT */
- if (apsel >= 256)
- return ERROR_INVALID_ARGUMENTS;
+ if (apsel > DP_APSEL_MAX) {
+ command_print(CMD, "Invalid AP number");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- dap_ap_select(swjdp, apsel);
- dap_ap_read_reg_u32(swjdp, AP_REG_IDR, &apid);
- retval = jtagdp_transaction_endcheck(swjdp);
- command_print(CMD_CTX, "ap %" PRIi32 " selected, identification register 0x%8.8" PRIx32,
- apsel, apid);
+ dap->apsel = apsel;
+ return ERROR_OK;
+}
- return retval;
+COMMAND_HANDLER(dap_apcsw_command)
+{
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint32_t apcsw = dap->ap[dap->apsel].csw_default;
+ uint32_t csw_val, csw_mask;
+
+ switch (CMD_ARGC) {
+ case 0:
+ command_print(CMD, "ap %" PRIu32 " selected, csw 0x%8.8" PRIx32,
+ dap->apsel, apcsw);
+ return ERROR_OK;
+ case 1:
+ if (strcmp(CMD_ARGV[0], "default") == 0)
+ csw_val = CSW_AHB_DEFAULT;
+ else
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], csw_val);
+
+ if (csw_val & (CSW_SIZE_MASK | CSW_ADDRINC_MASK)) {
+ LOG_ERROR("CSW value cannot include 'Size' and 'AddrInc' bit-fields");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+ apcsw = csw_val;
+ break;
+ case 2:
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], csw_val);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], csw_mask);
+ if (csw_mask & (CSW_SIZE_MASK | CSW_ADDRINC_MASK)) {
+ LOG_ERROR("CSW mask cannot include 'Size' and 'AddrInc' bit-fields");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+ apcsw = (apcsw & ~csw_mask) | (csw_val & csw_mask);
+ break;
+ default:
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+ dap->ap[dap->apsel].csw_default = apcsw;
+
+ return 0;
}
-DAP_COMMAND_HANDLER(dap_apid_command)
+
+
+COMMAND_HANDLER(dap_apid_command)
{
- uint32_t apsel, apselsave, apid;
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint32_t apsel, apid;
int retval;
- apselsave = swjdp->apsel;
switch (CMD_ARGC) {
case 0:
- apsel = swjdp->apsel;
+ apsel = dap->apsel;
break;
case 1:
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
/* AP address is in bits 31:24 of DP_SELECT */
- if (apsel >= 256)
- return ERROR_INVALID_ARGUMENTS;
+ if (apsel > DP_APSEL_MAX) {
+ command_print(CMD, "Invalid AP number");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- if (apselsave != apsel)
- dap_ap_select(swjdp, apsel);
+ retval = dap_queue_ap_read(dap_ap(dap, apsel), AP_REG_IDR, &apid);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
+ return retval;
- dap_ap_read_reg_u32(swjdp, AP_REG_IDR, &apid);
- retval = jtagdp_transaction_endcheck(swjdp);
- command_print(CMD_CTX, "0x%8.8" PRIx32, apid);
- if (apselsave != apsel)
- dap_ap_select(swjdp, apselsave);
+ command_print(CMD, "0x%8.8" PRIx32, apid);
return retval;
}
-/*
- * This represents the bits which must be sent out on TMS/SWDIO to
- * switch a DAP implemented using an SWJ-DP module into SWD mode.
- * These bits are stored (and transmitted) LSB-first.
- *
- * See the DAP-Lite specification, section 2.2.5 for information
- * about making the debug link select SWD or JTAG. (Similar info
- * is in a few other ARM documents.)
- */
-static const uint8_t jtag2swd_bitseq[] = {
- /* More than 50 TCK/SWCLK cycles with TMS/SWDIO high,
- * putting both JTAG and SWD logic into reset state.
- */
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- /* Switching sequence enables SWD and disables JTAG
- * NOTE: bits in the DP's IDCODE may expose the need for
- * an old/deprecated sequence (0xb6 0xed).
- */
- 0x9e, 0xe7,
- /* More than 50 TCK/SWCLK cycles with TMS/SWDIO high,
- * putting both JTAG and SWD logic into reset state.
- */
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-};
-
-/**
- * Put the debug link into SWD mode, if the target supports it.
- * The link's initial mode may be either JTAG (for example,
- * with SWJ-DP after reset) or SWD.
- *
- * @param target Enters SWD mode (if possible).
- *
- * Note that targets using the JTAG-DP do not support SWD, and that
- * some targets which could otherwise support it may have have been
- * configured to disable SWD signaling
- *
- * @return ERROR_OK or else a fault code.
- */
-int dap_to_swd(struct target *target)
+COMMAND_HANDLER(dap_apreg_command)
{
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint32_t apsel, reg, value;
+ struct adiv5_ap *ap;
int retval;
- LOG_DEBUG("Enter SWD mode");
+ if (CMD_ARGC < 2 || CMD_ARGC > 3)
+ return ERROR_COMMAND_SYNTAX_ERROR;
- /* REVISIT it's nasty to need to make calls to a "jtag"
- * subsystem if the link isn't in JTAG mode...
- */
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
+ /* AP address is in bits 31:24 of DP_SELECT */
+ if (apsel > DP_APSEL_MAX) {
+ command_print(CMD, "Invalid AP number");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
- retval = jtag_add_tms_seq(8 * sizeof(jtag2swd_bitseq),
- jtag2swd_bitseq, TAP_INVALID);
+ ap = dap_ap(dap, apsel);
+
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], reg);
+ if (reg >= 256 || (reg & 3)) {
+ command_print(CMD, "Invalid reg value (should be less than 256 and 4 bytes aligned)");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+
+ if (CMD_ARGC == 3) {
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], value);
+ switch (reg) {
+ case MEM_AP_REG_CSW:
+ ap->csw_value = 0; /* invalid, in case write fails */
+ retval = dap_queue_ap_write(ap, reg, value);
+ if (retval == ERROR_OK)
+ ap->csw_value = value;
+ break;
+ case MEM_AP_REG_TAR:
+ retval = dap_queue_ap_write(ap, reg, value);
+ if (retval == ERROR_OK)
+ ap->tar_value = (ap->tar_value & ~0xFFFFFFFFull) | value;
+ else {
+ /* To track independent writes to TAR and TAR64, two tar_valid flags */
+ /* should be used. To keep it simple, tar_valid is only invalidated on a */
+ /* write fail. This approach causes a later re-write of the TAR and TAR64 */
+ /* if tar_valid is false. */
+ ap->tar_valid = false;
+ }
+ break;
+ case MEM_AP_REG_TAR64:
+ retval = dap_queue_ap_write(ap, reg, value);
+ if (retval == ERROR_OK)
+ ap->tar_value = (ap->tar_value & 0xFFFFFFFFull) | (((target_addr_t)value) << 32);
+ else {
+ /* See above comment for the MEM_AP_REG_TAR failed write case */
+ ap->tar_valid = false;
+ }
+ break;
+ default:
+ retval = dap_queue_ap_write(ap, reg, value);
+ break;
+ }
+ } else {
+ retval = dap_queue_ap_read(ap, reg, &value);
+ }
if (retval == ERROR_OK)
- retval = jtag_execute_queue();
+ retval = dap_run(dap);
- /* REVISIT set up the DAP's ops vector for SWD mode. */
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (CMD_ARGC == 2)
+ command_print(CMD, "0x%08" PRIx32, value);
return retval;
}
-/**
- * This represents the bits which must be sent out on TMS/SWDIO to
- * switch a DAP implemented using an SWJ-DP module into JTAG mode.
- * These bits are stored (and transmitted) LSB-first.
- *
- * These bits are stored (and transmitted) LSB-first.
- */
-static const uint8_t swd2jtag_bitseq[] = {
- /* More than 50 TCK/SWCLK cycles with TMS/SWDIO high,
- * putting both JTAG and SWD logic into reset state.
- */
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- /* Switching equence disables SWD and enables JTAG
- * NOTE: bits in the DP's IDCODE can expose the need for
- * the old/deprecated sequence (0xae 0xde).
- */
- 0x3c, 0xe7,
- /* At least 50 TCK/SWCLK cycles with TMS/SWDIO high,
- * putting both JTAG and SWD logic into reset state.
- * NOTE: some docs say "at least 5".
- */
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-};
-
-/** Put the debug link into JTAG mode, if the target supports it.
- * The link's initial mode may be either SWD or JTAG.
- *
- * @param target Enters JTAG mode (if possible).
- *
- * Note that targets implemented with SW-DP do not support JTAG, and
- * that some targets which could otherwise support it may have been
- * configured to disable JTAG signaling
- *
- * @return ERROR_OK or else a fault code.
- */
-int dap_to_jtag(struct target *target)
+COMMAND_HANDLER(dap_dpreg_command)
{
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint32_t reg, value;
int retval;
- LOG_DEBUG("Enter JTAG mode");
+ if (CMD_ARGC < 1 || CMD_ARGC > 2)
+ return ERROR_COMMAND_SYNTAX_ERROR;
- /* REVISIT it's nasty to need to make calls to a "jtag"
- * subsystem if the link isn't in JTAG mode...
- */
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], reg);
+ if (reg >= 256 || (reg & 3)) {
+ command_print(CMD, "Invalid reg value (should be less than 256 and 4 bytes aligned)");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
- retval = jtag_add_tms_seq(8 * sizeof(swd2jtag_bitseq),
- swd2jtag_bitseq, TAP_RESET);
+ if (CMD_ARGC == 2) {
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
+ retval = dap_queue_dp_write(dap, reg, value);
+ } else {
+ retval = dap_queue_dp_read(dap, reg, &value);
+ }
if (retval == ERROR_OK)
- retval = jtag_execute_queue();
+ retval = dap_run(dap);
- /* REVISIT set up the DAP's ops vector for JTAG mode. */
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (CMD_ARGC == 1)
+ command_print(CMD, "0x%08" PRIx32, value);
return retval;
}
+
+COMMAND_HANDLER(dap_ti_be_32_quirks_command)
+{
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ return CALL_COMMAND_HANDLER(handle_command_parse_bool, &dap->ti_be_32_quirks,
+ "TI BE-32 quirks mode");
+}
+
+const struct command_registration dap_instance_commands[] = {
+ {
+ .name = "info",
+ .handler = handle_dap_info_command,
+ .mode = COMMAND_EXEC,
+ .help = "display ROM table for MEM-AP "
+ "(default currently selected AP)",
+ .usage = "[ap_num]",
+ },
+ {
+ .name = "apsel",
+ .handler = dap_apsel_command,
+ .mode = COMMAND_ANY,
+ .help = "Set the currently selected AP (default 0) "
+ "and display the result",
+ .usage = "[ap_num]",
+ },
+ {
+ .name = "apcsw",
+ .handler = dap_apcsw_command,
+ .mode = COMMAND_ANY,
+ .help = "Set CSW default bits",
+ .usage = "[value [mask]]",
+ },
+
+ {
+ .name = "apid",
+ .handler = dap_apid_command,
+ .mode = COMMAND_EXEC,
+ .help = "return ID register from AP "
+ "(default currently selected AP)",
+ .usage = "[ap_num]",
+ },
+ {
+ .name = "apreg",
+ .handler = dap_apreg_command,
+ .mode = COMMAND_EXEC,
+ .help = "read/write a register from AP "
+ "(reg is byte address of a word register, like 0 4 8...)",
+ .usage = "ap_num reg [value]",
+ },
+ {
+ .name = "dpreg",
+ .handler = dap_dpreg_command,
+ .mode = COMMAND_EXEC,
+ .help = "read/write a register from DP "
+ "(reg is byte address (bank << 4 | reg) of a word register, like 0 4 8...)",
+ .usage = "reg [value]",
+ },
+ {
+ .name = "baseaddr",
+ .handler = dap_baseaddr_command,
+ .mode = COMMAND_EXEC,
+ .help = "return debug base address from MEM-AP "
+ "(default currently selected AP)",
+ .usage = "[ap_num]",
+ },
+ {
+ .name = "memaccess",
+ .handler = dap_memaccess_command,
+ .mode = COMMAND_EXEC,
+ .help = "set/get number of extra tck for MEM-AP memory "
+ "bus access [0-255]",
+ .usage = "[cycles]",
+ },
+ {
+ .name = "ti_be_32_quirks",
+ .handler = dap_ti_be_32_quirks_command,
+ .mode = COMMAND_CONFIG,
+ .help = "set/get quirks mode for TI TMS450/TMS570 processors",
+ .usage = "[enable]",
+ },
+ COMMAND_REGISTRATION_DONE
+};
Code Review / openocd.git / blobdiff