adi_v5: Remove unused features of the DAP and SWD interfaces

[openocd.git] / src / target / arm_adi_v5.h

diff --git a/src/target/arm_adi_v5.h b/src/target/arm_adi_v5.h
index c51e8f81b7d03cef3c5af0494b3c05dd70e87015..09b6b0d7401ae9d205c13e04f0da70e2c6e41cc0 100644 (file)
--- a/src/target/arm_adi_v5.h
+++ b/src/target/arm_adi_v5.h
@@ -220,7 +220,7 @@ struct adiv5_dap {
  * both JTAG and SWD transports.  All submitted transactions are logically
  * queued, until the queue is executed by run().  Some implementations might
  * execute transactions as soon as they're submitted, but no status is made
- * availablue until run().
+ * available until run().
  */
 struct dap_ops {
        /** If the DAP transport isn't SWD, it must be JTAG.  Upper level
@@ -228,10 +228,6 @@ struct dap_ops {
         */
        bool    is_swd;
 
-       /** Reads the DAP's IDCODe register. */
-       int (*queue_idcode_read)(struct adiv5_dap *dap,
-                       uint8_t *ack, uint32_t *data);
-
        /** DP register read. */
        int (*queue_dp_read)(struct adiv5_dap *dap, unsigned reg,
                        uint32_t *data);
@@ -245,9 +241,6 @@ struct dap_ops {
        /** AP register write. */
        int (*queue_ap_write)(struct adiv5_dap *dap, unsigned reg,
                        uint32_t data);
-       /** AP read block. */
-       int (*queue_ap_read_block)(struct adiv5_dap *dap, unsigned reg,
-                       uint32_t blocksize, uint8_t *buffer);
 
        /** AP operation abort. */
        int (*queue_ap_abort)(struct adiv5_dap *dap, uint8_t *ack);
@@ -265,24 +258,6 @@ enum ap_type {
        AP_TYPE_JTAG_AP = 0x10   /* JTAG-AP - JTAG master for controlling other JTAG devices */
 };
 
-/**
- * Queue an IDCODE register read.  This is primarily useful for SWD
- * transports, where it is required as part of link initialization.
- * (For JTAG, this register is read as part of scan chain setup.)
- *
- * @param dap The DAP used for reading.
- * @param ack Pointer to where transaction status will be stored.
- * @param data Pointer saying where to store the IDCODE value.
- *
- * @return ERROR_OK for success, else a fault code.
- */
-static inline int dap_queue_idcode_read(struct adiv5_dap *dap,
-               uint8_t *ack, uint32_t *data)
-{
-       assert(dap->ops != NULL);
-       return dap->ops->queue_idcode_read(dap, ack, data);
-}
-
 /**
  * Queue a DP register read.
  * Note that not all DP registers are readable; also, that JTAG and SWD
@@ -353,24 +328,6 @@ static inline int dap_queue_ap_write(struct adiv5_dap *dap,
        return dap->ops->queue_ap_write(dap, reg, data);
 }
 
-/**
- * Queue an AP block read.
- *
- * @param dap The DAP used for reading.
- * @param reg The number of the AP register being read.
- * @param blocksize The number of the AP register being read.
- * @param buffer Pointer saying where to store the data
- * (in host endianness).
- *
- * @return ERROR_OK for success, else a fault code.
- */
-static inline int dap_queue_ap_read_block(struct adiv5_dap *dap,
-               unsigned reg, unsigned blocksize, uint8_t *buffer)
-{
-       assert(dap->ops != NULL);
-       return dap->ops->queue_ap_read_block(dap, reg, blocksize, buffer);
-}
-
 /**
  * Queue an AP abort operation.  The current AP transaction is aborted,
  * including any update of the transaction counter.  The AP is left in