arm_adi_v5: Add convenience "atomic"" function for DP reads
[openocd.git] / src / target / arm_adi_v5.h
index 1c0854704191c227c95981777c35a9971d0d4715..9f0dea9119186466e38f2f389c0f6f89290ba71e 100644 (file)
@@ -18,8 +18,9 @@
  *   You should have received a copy of the GNU General Public License     *
  *   along with this program; if not, write to the                         *
  *   Free Software Foundation, Inc.,                                       *
- *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ *   51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.           *
  ***************************************************************************/
+
 #ifndef ARM_ADI_V5_H
 #define ARM_ADI_V5_H
 
@@ -59,8 +60,8 @@
 #define DP_SELECT              0x8             /* JTAG: r/w; SWD: write */
 #define DP_RDBUFF              0xC             /* read-only */
 
-#define WCR_TO_TRN(wcr) (1 + (3 & ((wcr)) >> 8))       /* 1..4 clocks */
-#define WCR_TO_PRESCALE(wcr) (7 & ((wcr)))             /* impl defined */
+#define WCR_TO_TRN(wcr) ((uint32_t)(1 + (3 & ((wcr)) >> 8)))   /* 1..4 clocks */
+#define WCR_TO_PRESCALE(wcr) ((uint32_t)(7 & ((wcr))))         /* impl defined */
 
 /* Fields of the DP's AP ABORT register */
 #define DAPABORT               (1 << 0)
 /* 30:24 - implementation-defined! */
 #define CSW_HPROT                      (1 << 25)               /* ? */
 #define CSW_MASTER_DEBUG       (1 << 29)               /* ? */
+#define CSW_SPROT (1 << 30)
 #define CSW_DBGSWENABLE                (1 << 31)
 
 /**
  * as part of setting up a debug session (if all the dual-role JTAG/SWD
  * signals are available).
  */
-struct adiv5_dap
-{
+struct adiv5_dap {
        const struct dap_ops *ops;
 
        struct arm_jtag *jtag_info;
        /* Control config */
        uint32_t dp_ctrl_stat;
 
-
+       uint32_t apcsw[256];
        uint32_t apsel;
 
        /**
@@ -182,8 +183,21 @@ struct adiv5_dap
         * MEM-AP access before we try to read its status (and/or result).
         */
        uint32_t        memaccess_tck;
+
        /* Size of TAR autoincrement block, ARM ADI Specification requires at least 10 bits */
        uint32_t tar_autoincr_block;
+
+       /* true if packed transfers are supported by the MEM-AP */
+       bool packed_transfers;
+
+       /* true if unaligned memory access is not supported by the MEM-AP */
+       bool unaligned_access_bad;
+
+       /* The TI TMS470 and TMS570 series processors use a BE-32 memory ordering
+        * despite lack of support in the ARMv7 architecture. Memory access through
+        * the AHB-AP has strange byte ordering these processors, and we need to
+        * swizzle appropriately. */
+       bool ti_be_32_quirks;
 };
 
 /**
@@ -216,6 +230,10 @@ struct dap_ops {
        /** AP register write. */
        int (*queue_ap_write)(struct adiv5_dap *dap, unsigned reg,
                        uint32_t data);
+       /** AP read block. */
+       int (*queue_ap_read_block)(struct adiv5_dap *dap, unsigned reg,
+                       uint32_t blocksize, uint8_t *buffer);
+
        /** AP operation abort. */
        int (*queue_ap_abort)(struct adiv5_dap *dap, uint8_t *ack);
 
@@ -223,6 +241,15 @@ struct dap_ops {
        int (*run)(struct adiv5_dap *dap);
 };
 
+/*
+ * Access Port types
+ */
+enum ap_type {
+       AP_TYPE_AHB_AP  = 0x01,  /* AHB Memory-AP */
+       AP_TYPE_APB_AP  = 0x02,  /* APB Memory-AP */
+       AP_TYPE_JTAG_AP = 0x10   /* JTAG-AP - JTAG master for controlling other JTAG devices */
+};
+
 /**
  * Queue an IDCODE register read.  This is primarily useful for SWD
  * transports, where it is required as part of link initialization.
@@ -249,7 +276,7 @@ static inline int dap_queue_idcode_read(struct adiv5_dap *dap,
  * @param dap The DAP used for reading.
  * @param reg The two-bit number of the DP register being read.
  * @param data Pointer saying where to store the register's value
- *     (in host endianness).
+ * (in host endianness).
  *
  * @return ERROR_OK for success, else a fault code.
  */
@@ -284,7 +311,7 @@ static inline int dap_queue_dp_write(struct adiv5_dap *dap,
  * @param dap The DAP used for reading.
  * @param reg The number of the AP register being read.
  * @param data Pointer saying where to store the register's value
- *     (in host endianness).
+ * (in host endianness).
  *
  * @return ERROR_OK for success, else a fault code.
  */
@@ -311,6 +338,24 @@ static inline int dap_queue_ap_write(struct adiv5_dap *dap,
        return dap->ops->queue_ap_write(dap, reg, data);
 }
 
+/**
+ * Queue an AP block read.
+ *
+ * @param dap The DAP used for reading.
+ * @param reg The number of the AP register being read.
+ * @param blocksize The number of the AP register being read.
+ * @param buffer Pointer saying where to store the data
+ * (in host endianness).
+ *
+ * @return ERROR_OK for success, else a fault code.
+ */
+static inline int dap_queue_ap_read_block(struct adiv5_dap *dap,
+               unsigned reg, unsigned blocksize, uint8_t *buffer)
+{
+       assert(dap->ops != NULL);
+       return dap->ops->queue_ap_read_block(dap, reg, blocksize, buffer);
+}
+
 /**
  * Queue an AP abort operation.  The current AP transaction is aborted,
  * including any update of the transaction counter.  The AP is left in
@@ -344,14 +389,26 @@ static inline int dap_run(struct adiv5_dap *dap)
        return dap->ops->run(dap);
 }
 
+static inline int dap_dp_read_atomic(struct adiv5_dap *dap, unsigned reg,
+                                    uint32_t *value)
+{
+       int retval;
+
+       retval = dap_queue_dp_read(dap, reg, value);
+       if (retval != ERROR_OK)
+               return retval;
+
+       return dap_run(dap);
+}
+
 /** Accessor for currently selected DAP-AP number (0..255) */
 static inline uint8_t dap_ap_get_select(struct adiv5_dap *swjdp)
 {
-       return (uint8_t)(swjdp ->ap_current >> 24);
+       return (uint8_t)(swjdp->ap_current >> 24);
 }
 
 /* AP selection applies to future AP transactions */
-void dap_ap_select(struct adiv5_dap *dap,uint8_t ap);
+void dap_ap_select(struct adiv5_dap *dap, uint8_t ap);
 
 /* Queued AP transactions */
 int dap_setup_accessport(struct adiv5_dap *swjdp,
@@ -367,23 +424,6 @@ int mem_ap_read_atomic_u32(struct adiv5_dap *swjdp,
 int mem_ap_write_atomic_u32(struct adiv5_dap *swjdp,
                uint32_t address, uint32_t value);
 
-/* MEM-AP memory mapped bus block transfers */
-int mem_ap_read_buf_u8(struct adiv5_dap *swjdp,
-               uint8_t *buffer, int count, uint32_t address);
-int mem_ap_read_buf_u16(struct adiv5_dap *swjdp,
-               uint8_t *buffer, int count, uint32_t address);
-int mem_ap_read_buf_u32(struct adiv5_dap *swjdp,
-               uint8_t *buffer, int count, uint32_t address);
-
-int mem_ap_write_buf_u8(struct adiv5_dap *swjdp,
-               const uint8_t *buffer, int count, uint32_t address);
-int mem_ap_write_buf_u16(struct adiv5_dap *swjdp,
-               const uint8_t *buffer, int count, uint32_t address);
-int mem_ap_write_buf_u32(struct adiv5_dap *swjdp,
-               const uint8_t *buffer, int count, uint32_t address);
-
-
-
 /* Queued MEM-AP memory mapped single word transfers with selection of ap */
 int mem_ap_sel_read_u32(struct adiv5_dap *swjdp, uint8_t ap,
                uint32_t address, uint32_t *value);
@@ -396,22 +436,24 @@ int mem_ap_sel_read_atomic_u32(struct adiv5_dap *swjdp, uint8_t ap,
 int mem_ap_sel_write_atomic_u32(struct adiv5_dap *swjdp, uint8_t ap,
                uint32_t address, uint32_t value);
 
-/* MEM-AP memory mapped bus block transfers with selection of ap */
-int mem_ap_sel_read_buf_u8(struct adiv5_dap *swjdp, uint8_t ap,
-               uint8_t *buffer, int count, uint32_t address);
-int mem_ap_sel_read_buf_u16(struct adiv5_dap *swjdp, uint8_t ap,
-               uint8_t *buffer, int count, uint32_t address);
-int mem_ap_sel_read_buf_u32(struct adiv5_dap *swjdp, uint8_t ap,
-               uint8_t *buffer, int count, uint32_t address);
-
-int mem_ap_sel_write_buf_u8(struct adiv5_dap *swjdp, uint8_t ap,
-               const uint8_t *buffer, int count, uint32_t address);
-int mem_ap_sel_write_buf_u16(struct adiv5_dap *swjdp, uint8_t ap,
-               const uint8_t *buffer, int count, uint32_t address);
-int mem_ap_sel_write_buf_u32(struct adiv5_dap *swjdp, uint8_t ap,
-               const uint8_t *buffer, int count, uint32_t address);
-
-
+/* Synchronous MEM-AP memory mapped bus block transfers */
+int mem_ap_read(struct adiv5_dap *dap, uint8_t *buffer, uint32_t size,
+               uint32_t count, uint32_t address, bool addrinc);
+int mem_ap_write(struct adiv5_dap *dap, const uint8_t *buffer, uint32_t size,
+               uint32_t count, uint32_t address, bool addrinc);
+
+/* Synchronous MEM-AP memory mapped bus block transfers with selection of ap */
+int mem_ap_sel_read_buf(struct adiv5_dap *swjdp, uint8_t ap,
+               uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address);
+int mem_ap_sel_write_buf(struct adiv5_dap *swjdp, uint8_t ap,
+               const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address);
+
+/* Synchronous, non-incrementing buffer functions for accessing fifos, with
+ * selection of ap */
+int mem_ap_sel_read_buf_noincr(struct adiv5_dap *swjdp, uint8_t ap,
+               uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address);
+int mem_ap_sel_write_buf_noincr(struct adiv5_dap *swjdp, uint8_t ap,
+               const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address);
 
 /* Initialisation of the debug system, power domains and registers */
 int ahbap_debugport_init(struct adiv5_dap *swjdp);
@@ -420,6 +462,11 @@ int ahbap_debugport_init(struct adiv5_dap *swjdp);
 int dap_get_debugbase(struct adiv5_dap *dap, int ap,
                        uint32_t *dbgbase, uint32_t *apid);
 
+/* Probe Access Ports to find a particular type */
+int dap_find_ap(struct adiv5_dap *dap,
+                       enum ap_type type_to_find,
+                       uint8_t *ap_num_out);
+
 /* Lookup CoreSight component */
 int dap_lookup_cs_component(struct adiv5_dap *dap, int ap,
                        uint32_t dbgbase, uint8_t type, uint32_t *addr);

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)