adi_v5: enforce check on AP number value
[openocd.git] / src / target / arm_adi_v5.h
index 051c1bf0ff68000926bdc8a5b28737d6303904ea..a340b76f07adc97022658f74e9656f210327426f 100644 (file)
@@ -19,8 +19,8 @@
  *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
  ***************************************************************************/
 
-#ifndef ARM_ADI_V5_H
-#define ARM_ADI_V5_H
+#ifndef OPENOCD_TARGET_ARM_ADI_V5_H
+#define OPENOCD_TARGET_ARM_ADI_V5_H
 
 /**
  * @file
 #define AP_REG_IDR                     0xFC            /* RO: Identification Register */
 
 /* Fields of the MEM-AP's CSW register */
+#define CSW_SIZE_MASK          7
 #define CSW_8BIT               0
 #define CSW_16BIT              1
 #define CSW_32BIT              2
 #define CSW_ADDRINC_PACKED  (2UL << 4)
 #define CSW_DEVICE_EN       (1UL << 6)
 #define CSW_TRIN_PROG       (1UL << 7)
+/* all fields in bits 12 and above are implementation-defined! */
 #define CSW_SPIDEN          (1UL << 23)
-/* 30:24 - implementation-defined! */
-#define CSW_HPROT           (1UL << 25) /* ? */
-#define CSW_MASTER_DEBUG    (1UL << 29) /* ? */
+#define CSW_HPROT1          (1UL << 25) /* AHB: Privileged */
+#define CSW_MASTER_DEBUG    (1UL << 29) /* AHB: set HMASTER signals to AHB-AP ID */
 #define CSW_SPROT           (1UL << 30)
 #define CSW_DBGSWENABLE     (1UL << 31)
 
+/* initial value of csw_default used for MEM-AP transfers */
+#define CSW_DEFAULT                    (CSW_HPROT1 | CSW_MASTER_DEBUG | CSW_DBGSWENABLE)
+
 /* Fields of the MEM-AP's IDR register */
 #define IDR_REV     (0xFUL << 28)
 #define IDR_JEP106  (0x7FFUL << 17)
 #define DP_SELECT_DPBANK 0x0000000F
 #define DP_SELECT_INVALID 0x00FFFF00 /* Reserved bits one */
 
+#define DP_APSEL_MAX        (255)
+#define DP_APSEL_INVALID    (-1)
+
 /**
  * This represents an ARM Debug Interface (v5) Access Port (AP).
  * Most common is a MEM-AP, for memory access.
@@ -180,6 +187,9 @@ struct adiv5_ap {
 
        /* true if unaligned memory access is not supported by the MEM-AP */
        bool unaligned_access_bad;
+
+       /* true if tar_value is in sync with TAR register */
+       bool tar_valid;
 };
 
 
@@ -240,6 +250,10 @@ struct adiv5_dap {
         * should be performed before the next access.
         */
        bool do_reconnect;
+
+       /** Flag saying whether to ignore the syspwrupack flag in DAP. Some devices
+        *  do not set this bit until later in the bringup sequence */
+       bool ignore_syspwrupack;
 };
 
 /**
@@ -250,6 +264,8 @@ struct adiv5_dap {
  * available until run().
  */
 struct dap_ops {
+       /** connect operation for SWD */
+       int (*connect)(struct adiv5_dap *dap);
        /** DP register read. */
        int (*queue_dp_read)(struct adiv5_dap *dap, unsigned reg,
                        uint32_t *data);
@@ -273,6 +289,9 @@ struct dap_ops {
        /** Executes all queued DAP operations but doesn't check
         * sticky error conditions */
        int (*sync)(struct adiv5_dap *dap);
+
+       /** Optional; called at OpenOCD exit */
+       void (*quit)(struct adiv5_dap *dap);
 };
 
 /*
@@ -469,13 +488,13 @@ int mem_ap_read_buf_noincr(struct adiv5_ap *ap,
 int mem_ap_write_buf_noincr(struct adiv5_ap *ap,
                const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address);
 
-/* Create DAP struct */
-struct adiv5_dap *dap_init(void);
-
 /* Initialisation of the debug system, power domains and registers */
 int dap_dp_init(struct adiv5_dap *dap);
 int mem_ap_init(struct adiv5_ap *ap);
 
+/* Invalidate cached DP select and cached TAR and CSW of all APs */
+void dap_invalidate_cache(struct adiv5_dap *dap);
+
 /* Probe the AP for ROM Table location */
 int dap_get_debugbase(struct adiv5_ap *ap,
                        uint32_t *dbgbase, uint32_t *apid);
@@ -502,6 +521,24 @@ int dap_to_swd(struct target *target);
 /* Put debug link into JTAG mode */
 int dap_to_jtag(struct target *target);
 
-extern const struct command_registration dap_command_handlers[];
+extern const struct command_registration dap_instance_commands[];
+
+struct arm_dap_object;
+extern struct adiv5_dap *dap_instance_by_jim_obj(Jim_Interp *interp, Jim_Obj *o);
+extern struct adiv5_dap *adiv5_get_dap(struct arm_dap_object *obj);
+extern int dap_info_command(struct command_context *cmd_ctx,
+                                        struct adiv5_ap *ap);
+extern int dap_register_commands(struct command_context *cmd_ctx);
+extern const char *adiv5_dap_name(struct adiv5_dap *self);
+extern const struct swd_driver *adiv5_dap_swd_driver(struct adiv5_dap *self);
+extern int dap_cleanup_all(void);
+
+struct adiv5_private_config {
+       int ap_num;
+       struct adiv5_dap *dap;
+};
+
+extern int adiv5_verify_config(struct adiv5_private_config *pc);
+extern int adiv5_jim_configure(struct target *target, Jim_GetOptInfo *goi);
 
-#endif
+#endif /* OPENOCD_TARGET_ARM_ADI_V5_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)