adi_v5_swd: Read RDBUFF once after a sequence of AP reads

[openocd.git] / src / target / arm_adi_v5.h

diff --git a/src/target/arm_adi_v5.h b/src/target/arm_adi_v5.h
index 131e9d960aae1d26fc80324a7a5f2376520db565..c51e8f81b7d03cef3c5af0494b3c05dd70e87015 100644 (file)
--- a/src/target/arm_adi_v5.h
+++ b/src/target/arm_adi_v5.h
@@ -47,18 +47,20 @@
 #define DPAP_WRITE             0
 #define DPAP_READ              1
 
+#define BANK_REG(bank, reg)    (((bank) << 4) | (reg))
+
 /* A[3:0] for DP registers; A[1:0] are always zero.
  * - JTAG accesses all of these via JTAG_DP_DPACC, except for
  *   IDCODE (JTAG_DP_IDCODE) and ABORT (JTAG_DP_ABORT).
  * - SWD accesses these directly, sometimes needing SELECT.CTRLSEL
  */
-#define DP_IDCODE              0               /* SWD: read */
-#define DP_ABORT               0               /* SWD: write */
-#define DP_CTRL_STAT           0x4             /* r/w */
-#define DP_WCR                 0x4             /* SWD: r/w (mux CTRLSEL) */
-#define DP_RESEND              0x8             /* SWD: read */
-#define DP_SELECT              0x8             /* JTAG: r/w; SWD: write */
-#define DP_RDBUFF              0xC             /* read-only */
+#define DP_IDCODE              BANK_REG(0x0, 0x0)      /* SWD: read */
+#define DP_ABORT               BANK_REG(0x0, 0x0)      /* SWD: write */
+#define DP_CTRL_STAT           BANK_REG(0x0, 0x4)      /* r/w */
+#define DP_RESEND              BANK_REG(0x0, 0x8)      /* SWD: read */
+#define DP_SELECT              BANK_REG(0x0, 0x8)      /* JTAG: r/w; SWD: write */
+#define DP_RDBUFF              BANK_REG(0x0, 0xC)      /* read-only */
+#define DP_WCR                 BANK_REG(0x1, 0x4)      /* SWD: r/w */
 
 #define WCR_TO_TRN(wcr) ((uint32_t)(1 + (3 & ((wcr)) >> 8)))   /* 1..4 clocks */
 #define WCR_TO_PRESCALE(wcr) ((uint32_t)(7 & ((wcr))))         /* impl defined */
@@ -161,6 +163,13 @@ struct adiv5_dap {
         */
        uint32_t ap_bank_value;
 
+       /**
+        * Cache for DP_SELECT bits identifying the current four-word DP
+        * register bank.  This caches DP register addresss bits 7:4; JTAG
+        * and SWD access primitves pass address bits 3:2; bits 1:0 are zero.
+        */
+       uint32_t dp_bank_value;
+
        /**
         * Cache for (MEM-AP) AP_REG_CSW register value.  This is written to
         * configure an access mode, such as autoincrementing AP_REG_TAR during
@@ -178,6 +187,12 @@ struct adiv5_dap {
        /* information about current pending SWjDP-AHBAP transaction */
        uint8_t  ack;
 
+       /**
+        * Holds the pointer to the destination word for the last queued read,
+        * for use with posted AP read sequence optimization.
+        */
+       uint32_t *last_read;
+
        /**
         * Configures how many extra tck clocks are added after starting a
         * MEM-AP access before we try to read its status (and/or result).