#include "config.h"
#endif
-#include "replacements.h"
+#include <helper/replacements.h>
#include "armv7a.h"
#include "arm_disassembler.h"
#include "register.h"
-#include "binarybuffer.h"
-#include "command.h"
+#include <helper/binarybuffer.h>
+#include <helper/command.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
+#include "arm_opcodes.h"
+
static void armv7a_show_fault_registers(struct target *target)
{
return ERROR_INVALID_ARGUMENTS;
}
- LOG_USER("target halted in %s state due to %s, current mode: %s\n"
- "cpsr: 0x%8.8" PRIx32 " pc: 0x%8.8" PRIx32 "\n"
- "MMU: %s, D-Cache: %s, I-Cache: %s",
- armv4_5_state_strings[armv4_5->core_state],
- Jim_Nvp_value2name_simple(nvp_target_debug_reason,
- target->debug_reason)->name,
- arm_mode_name(armv4_5->core_mode),
- buf_get_u32(armv4_5->cpsr->value, 0, 32),
- buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32),
+ arm_arch_state(target);
+
+ LOG_USER("MMU: %s, D-Cache: %s, I-Cache: %s",
state[armv7a->armv4_5_mmu.mmu_enabled],
state[armv7a->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled],
state[armv7a->armv4_5_mmu.armv4_5_cache.i_cache_enabled]);
- if (armv4_5->core_mode == ARMV4_5_MODE_ABT)
+ if (armv4_5->core_mode == ARM_MODE_ABT)
armv7a_show_fault_registers(target);
- else if (target->debug_reason == DBG_REASON_WATCHPOINT)
+ if (target->debug_reason == DBG_REASON_WATCHPOINT)
LOG_USER("Watchpoint triggered at PC %#08x",
(unsigned) armv7a->dpm.wp_pc);
return dap_info_command(CMD_CTX, swjdp, apsel);
}
+/* FIXME this table should be part of generic DAP support, and
+ * be shared by the ARMv7-A/R and ARMv7-M support ...
+ */
static const struct command_registration armv7a_exec_command_handlers[] = {
{
.name = "info",
- .handler = &handle_dap_info_command,
+ .handler = handle_dap_info_command,
.mode = COMMAND_EXEC,
- .help = "dap info for ap [num], "
- "default currently selected AP",
+ .help = "display ROM table for MEM-AP "
+ "(default currently selected AP)",
+ .usage = "[ap_num]",
},
{
.name = "apsel",
- .handler = &handle_dap_apsel_command,
+ .handler = handle_dap_apsel_command,
.mode = COMMAND_EXEC,
- .help = "select a different AP [num] (default 0)",
+ .help = "Set the currently selected AP (default 0) "
+ "and display the result",
+ .usage = "[ap_num]",
},
{
.name = "apid",
- .handler = &handle_dap_apid_command,
+ .handler = handle_dap_apid_command,
.mode = COMMAND_EXEC,
- .help = "return id reg from AP [num], "
- "default currently selected AP",
+ .help = "return ID register from AP "
+ "(default currently selected AP)",
+ .usage = "[ap_num]",
},
{
.name = "baseaddr",
- .handler = &handle_dap_baseaddr_command,
+ .handler = handle_dap_baseaddr_command,
.mode = COMMAND_EXEC,
- .help = "return debug base address from AP [num], "
- "default currently selected AP",
+ .help = "return debug base address from MEM-AP "
+ "(default currently selected AP)",
+ .usage = "[ap_num]",
},
{
.name = "memaccess",
- .handler = &handle_dap_memaccess_command,
+ .handler = handle_dap_memaccess_command,
.mode = COMMAND_EXEC,
- .help = "set/get number of extra tck for mem-ap memory "
+ .help = "set/get number of extra tck for MEM-AP memory "
"bus access [0-255]",
+ .usage = "[cycles]",
},
COMMAND_REGISTRATION_DONE
};