#include "config.h"
#endif
-#include "replacements.h"
+#include <helper/replacements.h>
#include "armv7a.h"
#include "arm_disassembler.h"
#include "register.h"
-#include "binarybuffer.h"
-#include "command.h"
+#include <helper/binarybuffer.h>
+#include <helper/command.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
+#include "arm_opcodes.h"
+
static void armv7a_show_fault_registers(struct target *target)
{
uint32_t dfsr, ifsr, dfar, ifar;
struct armv7a_common *armv7a = target_to_armv7a(target);
-
- armv7a->read_cp15(target, 0, 0, 5, 0, &dfsr);
- armv7a->read_cp15(target, 0, 1, 5, 0, &ifsr);
- armv7a->read_cp15(target, 0, 0, 6, 0, &dfar);
- armv7a->read_cp15(target, 0, 2, 6, 0, &ifar);
+ struct arm_dpm *dpm = armv7a->armv4_5_common.dpm;
+ int retval;
+
+ retval = dpm->prepare(dpm);
+ if (retval != ERROR_OK)
+ return;
+
+ /* ARMV4_5_MRC(cpnum, op1, r0, CRn, CRm, op2) */
+
+ /* c5/c0 - {data, instruction} fault status registers */
+ retval = dpm->instr_read_data_r0(dpm,
+ ARMV4_5_MRC(15, 0, 0, 5, 0, 0),
+ &dfsr);
+ if (retval != ERROR_OK)
+ goto done;
+
+ retval = dpm->instr_read_data_r0(dpm,
+ ARMV4_5_MRC(15, 0, 0, 5, 0, 1),
+ &ifsr);
+ if (retval != ERROR_OK)
+ goto done;
+
+ /* c6/c0 - {data, instruction} fault address registers */
+ retval = dpm->instr_read_data_r0(dpm,
+ ARMV4_5_MRC(15, 0, 0, 6, 0, 0),
+ &dfar);
+ if (retval != ERROR_OK)
+ goto done;
+
+ retval = dpm->instr_read_data_r0(dpm,
+ ARMV4_5_MRC(15, 0, 0, 6, 0, 2),
+ &ifar);
+ if (retval != ERROR_OK)
+ goto done;
LOG_USER("Data fault registers DFSR: %8.8" PRIx32
", DFAR: %8.8" PRIx32, dfsr, dfar);
LOG_USER("Instruction fault registers IFSR: %8.8" PRIx32
", IFAR: %8.8" PRIx32, ifsr, ifar);
+done:
+ /* (void) */ dpm->finish(dpm);
}
int armv7a_arch_state(struct target *target)
};
struct armv7a_common *armv7a = target_to_armv7a(target);
- struct armv4_5_common_s *armv4_5 = &armv7a->armv4_5_common;
+ struct arm *armv4_5 = &armv7a->armv4_5_common;
if (armv7a->common_magic != ARMV7_COMMON_MAGIC)
{
return ERROR_INVALID_ARGUMENTS;
}
- LOG_USER("target halted in %s state due to %s, current mode: %s\n"
- "cpsr: 0x%8.8" PRIx32 " pc: 0x%8.8" PRIx32 "\n"
- "MMU: %s, D-Cache: %s, I-Cache: %s",
- armv4_5_state_strings[armv4_5->core_state],
- Jim_Nvp_value2name_simple(nvp_target_debug_reason,
- target->debug_reason)->name,
- arm_mode_name(armv4_5->core_mode),
- buf_get_u32(armv4_5->core_cache
- ->reg_list[ARMV4_5_CPSR].value, 0, 32),
- buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32),
+ arm_arch_state(target);
+
+ LOG_USER("MMU: %s, D-Cache: %s, I-Cache: %s",
state[armv7a->armv4_5_mmu.mmu_enabled],
state[armv7a->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled],
state[armv7a->armv4_5_mmu.armv4_5_cache.i_cache_enabled]);
- if (armv4_5->core_mode == ARMV4_5_MODE_ABT)
+ if (armv4_5->core_mode == ARM_MODE_ABT)
armv7a_show_fault_registers(target);
+ if (target->debug_reason == DBG_REASON_WATCHPOINT)
+ LOG_USER("Watchpoint triggered at PC %#08x",
+ (unsigned) armv7a->dpm.wp_pc);
return ERROR_OK;
}
return dap_info_command(CMD_CTX, swjdp, apsel);
}
-int armv7a_register_commands(struct command_context *cmd_ctx)
-{
- struct command *arm_adi_v5_dap_cmd;
-
- arm_adi_v5_dap_cmd = register_command(cmd_ctx, NULL, "dap",
- NULL, COMMAND_ANY,
- "cortex dap specific commands");
-
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "info",
- handle_dap_info_command, COMMAND_EXEC,
- "dap info for ap [num], "
- "default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "apsel",
- handle_dap_apsel_command, COMMAND_EXEC,
- "select a different AP [num] (default 0)");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "apid",
- handle_dap_apid_command, COMMAND_EXEC,
- "return id reg from AP [num], "
- "default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "baseaddr",
- handle_dap_baseaddr_command, COMMAND_EXEC,
- "return debug base address from AP [num], "
- "default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "memaccess",
- handle_dap_memaccess_command, COMMAND_EXEC,
- "set/get number of extra tck for mem-ap memory "
- "bus access [0-255]");
+/* FIXME this table should be part of generic DAP support, and
+ * be shared by the ARMv7-A/R and ARMv7-M support ...
+ */
+static const struct command_registration armv7a_exec_command_handlers[] = {
+ {
+ .name = "info",
+ .handler = handle_dap_info_command,
+ .mode = COMMAND_EXEC,
+ .help = "display ROM table for MEM-AP "
+ "(default currently selected AP)",
+ .usage = "[ap_num]",
+ },
+ {
+ .name = "apsel",
+ .handler = handle_dap_apsel_command,
+ .mode = COMMAND_EXEC,
+ .help = "Set the currently selected AP (default 0) "
+ "and display the result",
+ .usage = "[ap_num]",
+ },
+ {
+ .name = "apid",
+ .handler = handle_dap_apid_command,
+ .mode = COMMAND_EXEC,
+ .help = "return ID register from AP "
+ "(default currently selected AP)",
+ .usage = "[ap_num]",
+ },
+ {
+ .name = "baseaddr",
+ .handler = handle_dap_baseaddr_command,
+ .mode = COMMAND_EXEC,
+ .help = "return debug base address from MEM-AP "
+ "(default currently selected AP)",
+ .usage = "[ap_num]",
+ },
+ {
+ .name = "memaccess",
+ .handler = handle_dap_memaccess_command,
+ .mode = COMMAND_EXEC,
+ .help = "set/get number of extra tck for MEM-AP memory "
+ "bus access [0-255]",
+ .usage = "[cycles]",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+const struct command_registration armv7a_command_handlers[] = {
+ {
+ .name = "dap",
+ .mode = COMMAND_ANY,
+ .help = "Cortex DAP command group",
+ .chain = armv7a_exec_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};
- return ERROR_OK;
-}
Code Review / openocd.git / blobdiff