#include "cortex_m.h"
#include "target_request.h"
#include "target_type.h"
+#include "arm_adi_v5.h"
#include "arm_disassembler.h"
#include "register.h"
#include "arm_opcodes.h"
* any longer.
*/
+/* Supported Cortex-M Cores */
+static const struct cortex_m_part_info cortex_m_parts[] = {
+ {
+ .partno = CORTEX_M0_PARTNO,
+ .name = "Cortex-M0",
+ .arch = ARM_ARCH_V6M,
+ },
+ {
+ .partno = CORTEX_M0P_PARTNO,
+ .name = "Cortex-M0+",
+ .arch = ARM_ARCH_V6M,
+ },
+ {
+ .partno = CORTEX_M1_PARTNO,
+ .name = "Cortex-M1",
+ .arch = ARM_ARCH_V6M,
+ },
+ {
+ .partno = CORTEX_M3_PARTNO,
+ .name = "Cortex-M3",
+ .arch = ARM_ARCH_V7M,
+ .flags = CORTEX_M_F_TAR_AUTOINCR_BLOCK_4K,
+ },
+ {
+ .partno = CORTEX_M4_PARTNO,
+ .name = "Cortex-M4",
+ .arch = ARM_ARCH_V7M,
+ .flags = CORTEX_M_F_HAS_FPV4 | CORTEX_M_F_TAR_AUTOINCR_BLOCK_4K,
+ },
+ {
+ .partno = CORTEX_M7_PARTNO,
+ .name = "Cortex-M7",
+ .arch = ARM_ARCH_V7M,
+ .flags = CORTEX_M_F_HAS_FPV5,
+ },
+ {
+ .partno = CORTEX_M23_PARTNO,
+ .name = "Cortex-M23",
+ .arch = ARM_ARCH_V8M,
+ },
+ {
+ .partno = CORTEX_M33_PARTNO,
+ .name = "Cortex-M33",
+ .arch = ARM_ARCH_V8M,
+ .flags = CORTEX_M_F_HAS_FPV5,
+ },
+ {
+ .partno = CORTEX_M35P_PARTNO,
+ .name = "Cortex-M35P",
+ .arch = ARM_ARCH_V8M,
+ .flags = CORTEX_M_F_HAS_FPV5,
+ },
+ {
+ .partno = CORTEX_M55_PARTNO,
+ .name = "Cortex-M55",
+ .arch = ARM_ARCH_V8M,
+ .flags = CORTEX_M_F_HAS_FPV5,
+ },
+};
+
/* forward declarations */
static int cortex_m_store_core_reg_u32(struct target *target,
uint32_t num, uint32_t value);
if (retval != ERROR_OK)
return retval;
- retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DCRSR, regsel | DCRSR_WnR);
+ retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DCRSR, regsel | DCRSR_WNR);
if (retval != ERROR_OK)
return retval;
/* examine PE security state */
bool secure_state = false;
- if (armv7m->arm.is_armv8m) {
+ if (armv7m->arm.arch == ARM_ARCH_V8M) {
uint32_t dscsr;
retval = mem_ap_read_u32(armv7m->debug_ap, DCB_DSCSR, &dscsr);
* core, not the peripherals */
LOG_DEBUG("soft_reset_halt is discouraged, please use 'reset halt' instead.");
+ if (!cortex_m->vectreset_supported) {
+ LOG_ERROR("VECTRESET is not supported on this Cortex-M core");
+ return ERROR_FAIL;
+ }
+
/* Set C_DEBUGEN */
retval = cortex_m_write_debug_halt_mask(target, 0, C_STEP | C_MASKINTS);
if (retval != ERROR_OK)
}
/* current = 1: continue on current pc, otherwise continue at <address> */
- if (!current)
+ if (!current) {
buf_set_u32(pc->value, 0, 32, address);
+ pc->dirty = true;
+ pc->valid = true;
+ }
uint32_t pc_value = buf_get_u32(pc->value, 0, 32);
retval = ERROR_OK;
} else {
/* Use a standard Cortex-M3 software reset mechanism.
- * We default to using VECRESET as it is supported on all current cores
+ * We default to using VECTRESET as it is supported on all current cores
* (except Cortex-M0, M0+ and M1 which support SYSRESETREQ only!)
* This has the disadvantage of not resetting the peripherals, so a
* reset-init event handler is needed to perform any peripheral resets.
{
struct armv7m_common *armv7m = target_to_armv7m(target);
- if (armv7m->arm.is_armv6m) {
+ if (armv7m->arm.arch == ARM_ARCH_V6M) {
/* armv6m does not handle unaligned memory access */
if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
return ERROR_TARGET_UNALIGNED_ACCESS;
{
struct armv7m_common *armv7m = target_to_armv7m(target);
- if (armv7m->arm.is_armv6m) {
+ if (armv7m->arm.arch == ARM_ARCH_V6M) {
/* armv6m does not handle unaligned memory access */
if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
return ERROR_TARGET_UNALIGNED_ACCESS;
struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
struct armv7m_common *armv7m = target_to_armv7m(target);
- /* stlink shares the examine handler but does not support
+ /* hla_target shares the examine handler but does not support
* all its calls */
- if (!armv7m->stlink) {
+ if (!armv7m->is_hla_target) {
if (cortex_m->apsel == DP_APSEL_INVALID) {
/* Search for the MEM-AP */
retval = cortex_m_find_mem_ap(swjdp, &armv7m->debug_ap);
if (retval != ERROR_OK)
return retval;
- /* Get CPU Type */
- unsigned int core = (cpuid >> 4) & 0xf;
-
- /* Check if it is an ARMv8-M core */
- armv7m->arm.is_armv8m = true;
+ /* Get ARCH and CPU types */
+ const enum cortex_m_partno core_partno = (cpuid & ARM_CPUID_PARTNO_MASK) >> ARM_CPUID_PARTNO_POS;
- switch (cpuid & ARM_CPUID_PARTNO_MASK) {
- case CORTEX_M23_PARTNO:
- core = 23;
- break;
- case CORTEX_M33_PARTNO:
- core = 33;
- break;
- case CORTEX_M35P_PARTNO:
- core = 35;
- break;
- case CORTEX_M55_PARTNO:
- core = 55;
- break;
- default:
- armv7m->arm.is_armv8m = false;
+ for (unsigned int n = 0; n < ARRAY_SIZE(cortex_m_parts); n++) {
+ if (core_partno == cortex_m_parts[n].partno) {
+ cortex_m->core_info = &cortex_m_parts[n];
break;
+ }
+ }
+
+ if (!cortex_m->core_info) {
+ LOG_ERROR("Cortex-M PARTNO 0x%x is unrecognized", core_partno);
+ return ERROR_FAIL;
}
+ armv7m->arm.arch = cortex_m->core_info->arch;
+
+ LOG_INFO("%s: %s r%" PRId8 "p%" PRId8 " processor detected",
+ target_name(target),
+ cortex_m->core_info->name,
+ (uint8_t)((cpuid >> 20) & 0xf),
+ (uint8_t)((cpuid >> 0) & 0xf));
- LOG_DEBUG("Cortex-M%d r%" PRId8 "p%" PRId8 " processor detected",
- core, (uint8_t)((cpuid >> 20) & 0xf), (uint8_t)((cpuid >> 0) & 0xf));
cortex_m->maskints_erratum = false;
- if (core == 7) {
+ if (core_partno == CORTEX_M7_PARTNO) {
uint8_t rev, patch;
rev = (cpuid >> 20) & 0xf;
patch = (cpuid >> 0) & 0xf;
}
LOG_DEBUG("cpuid: 0x%8.8" PRIx32 "", cpuid);
- /* VECTRESET is supported only on ARMv7-M cores */
- cortex_m->vectreset_supported = !armv7m->arm.is_armv8m && !armv7m->arm.is_armv6m;
-
- if (core == 4) {
+ if (cortex_m->core_info->flags & CORTEX_M_F_HAS_FPV4) {
target_read_u32(target, MVFR0, &mvfr0);
target_read_u32(target, MVFR1, &mvfr1);
/* test for floating point feature on Cortex-M4 */
if ((mvfr0 == MVFR0_DEFAULT_M4) && (mvfr1 == MVFR1_DEFAULT_M4)) {
- LOG_DEBUG("Cortex-M%d floating point feature FPv4_SP found", core);
+ LOG_DEBUG("%s floating point feature FPv4_SP found", cortex_m->core_info->name);
armv7m->fp_feature = FPV4_SP;
}
- } else if (core == 7 || core == 33 || core == 35 || core == 55) {
+ } else if (cortex_m->core_info->flags & CORTEX_M_F_HAS_FPV5) {
target_read_u32(target, MVFR0, &mvfr0);
target_read_u32(target, MVFR1, &mvfr1);
/* test for floating point features on Cortex-M7 */
if ((mvfr0 == MVFR0_DEFAULT_M7_SP) && (mvfr1 == MVFR1_DEFAULT_M7_SP)) {
- LOG_DEBUG("Cortex-M%d floating point feature FPv5_SP found", core);
+ LOG_DEBUG("%s floating point feature FPv5_SP found", cortex_m->core_info->name);
armv7m->fp_feature = FPV5_SP;
} else if ((mvfr0 == MVFR0_DEFAULT_M7_DP) && (mvfr1 == MVFR1_DEFAULT_M7_DP)) {
- LOG_DEBUG("Cortex-M%d floating point feature FPv5_DP found", core);
+ LOG_DEBUG("%s floating point feature FPv5_DP found", cortex_m->core_info->name);
armv7m->fp_feature = FPV5_DP;
}
- } else if (core == 0) {
- /* Cortex-M0 does not support unaligned memory access */
- armv7m->arm.is_armv6m = true;
}
+ /* VECTRESET is supported only on ARMv7-M cores */
+ cortex_m->vectreset_supported = armv7m->arm.arch == ARM_ARCH_V7M;
+
/* Check for FPU, otherwise mark FPU register as non-existent */
if (armv7m->fp_feature == FP_NONE)
for (size_t idx = ARMV7M_FPU_FIRST_REG; idx <= ARMV7M_FPU_LAST_REG; idx++)
armv7m->arm.core_cache->reg_list[idx].exist = false;
- if (!armv7m->arm.is_armv8m)
+ if (armv7m->arm.arch != ARM_ARCH_V8M)
for (size_t idx = ARMV8M_FIRST_REG; idx <= ARMV8M_LAST_REG; idx++)
armv7m->arm.core_cache->reg_list[idx].exist = false;
- if (!armv7m->stlink) {
- if (core == 3 || core == 4)
+ if (!armv7m->is_hla_target) {
+ if (cortex_m->core_info->flags & CORTEX_M_F_TAR_AUTOINCR_BLOCK_4K)
/* Cortex-M3/M4 have 4096 bytes autoincrement range,
* s. ARM IHI 0031C: MEM-AP 7.2.2 */
armv7m->debug_ap->tar_autoincr_block = (1 << 12);
- else if (core == 7)
- /* Cortex-M7 has only 1024 bytes autoincrement range */
- armv7m->debug_ap->tar_autoincr_block = (1 << 10);
}
/* Enable debug requests */
cortex_m_dwt_setup(cortex_m, target);
/* These hardware breakpoints only work for code in flash! */
- LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
+ LOG_INFO("%s: target has %d breakpoints, %d watchpoints",
target_name(target),
cortex_m->fp_num_code,
cortex_m->dwt_num_comp);
return ERROR_FAIL;
struct cortex_m_common *cortex_m = calloc(1, sizeof(struct cortex_m_common));
- if (cortex_m == NULL) {
+ if (!cortex_m) {
LOG_ERROR("No memory creating target");
return ERROR_FAIL;
}
struct cortex_m_common *cortex_m = target_to_cm(target);
int retval;
- static const Jim_Nvp nvp_maskisr_modes[] = {
+ static const struct jim_nvp nvp_maskisr_modes[] = {
{ .name = "auto", .value = CORTEX_M_ISRMASK_AUTO },
{ .name = "off", .value = CORTEX_M_ISRMASK_OFF },
{ .name = "on", .value = CORTEX_M_ISRMASK_ON },
{ .name = "steponly", .value = CORTEX_M_ISRMASK_STEPONLY },
{ .name = NULL, .value = -1 },
};
- const Jim_Nvp *n;
+ const struct jim_nvp *n;
retval = cortex_m_verify_pointer(CMD, cortex_m);
}
if (CMD_ARGC > 0) {
- n = Jim_Nvp_name2value_simple(nvp_maskisr_modes, CMD_ARGV[0]);
- if (n->name == NULL)
+ n = jim_nvp_name2value_simple(nvp_maskisr_modes, CMD_ARGV[0]);
+ if (!n->name)
return ERROR_COMMAND_SYNTAX_ERROR;
cortex_m->isrmasking_mode = n->value;
cortex_m_set_maskints_for_halt(target);
}
- n = Jim_Nvp_value2name_simple(nvp_maskisr_modes, cortex_m->isrmasking_mode);
+ n = jim_nvp_value2name_simple(nvp_maskisr_modes, cortex_m->isrmasking_mode);
command_print(CMD, "cortex_m interrupt mask %s", n->name);
return ERROR_OK;
Code Review / openocd.git / blobdiff