+++ /dev/null
-/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * Copyright (C) 2006 by Magnus Lundin *
- * lundin@mlu.mine.nu *
- * *
- * Copyright (C) 2008 by Spencer Oliver *
- * spen@spen-soft.co.uk *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- * *
- * Cortex-M3(tm) TRM, ARM DDI 0337E (r1p1) and 0337G (r2p0) *
- * *
- ***************************************************************************/
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "breakpoints.h"
-#include "cortex_m3.h"
-#include "target_request.h"
-#include "target_type.h"
-#include "arm_disassembler.h"
-#include "register.h"
-#include "arm_opcodes.h"
-#include "arm_semihosting.h"
-#include <helper/time_support.h>
-
-/* NOTE: most of this should work fine for the Cortex-M1 and
- * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
- * Some differences: M0/M1 doesn't have FBP remapping or the
- * DWT tracing/profiling support. (So the cycle counter will
- * not be usable; the other stuff isn't currently used here.)
- *
- * Although there are some workarounds for errata seen only in r0p0
- * silicon, such old parts are hard to find and thus not much tested
- * any longer.
- */
-
-/**
- * Returns the type of a break point required by address location
- */
-#define BKPT_TYPE_BY_ADDR(addr) ((addr) < 0x20000000 ? BKPT_HARD : BKPT_SOFT)
-
-
-/* forward declarations */
-static int cortex_m3_set_breakpoint(struct target *target, struct breakpoint *breakpoint);
-static int cortex_m3_unset_breakpoint(struct target *target, struct breakpoint *breakpoint);
-static void cortex_m3_enable_watchpoints(struct target *target);
-static int cortex_m3_store_core_reg_u32(struct target *target,
- enum armv7m_regtype type, uint32_t num, uint32_t value);
-
-static int cortexm3_dap_read_coreregister_u32(struct adiv5_dap *swjdp,
- uint32_t *value, int regnum)
-{
- int retval;
- uint32_t dcrdr;
-
- /* because the DCB_DCRDR is used for the emulated dcc channel
- * we have to save/restore the DCB_DCRDR when used */
-
- retval = mem_ap_read_u32(swjdp, DCB_DCRDR, &dcrdr);
- if (retval != ERROR_OK)
- return retval;
-
- /* mem_ap_write_u32(swjdp, DCB_DCRSR, regnum); */
- retval = dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRSR & 0xFFFFFFF0);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_queue_ap_write(swjdp, AP_REG_BD0 | (DCB_DCRSR & 0xC), regnum);
- if (retval != ERROR_OK)
- return retval;
-
- /* mem_ap_read_u32(swjdp, DCB_DCRDR, value); */
- retval = dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRDR & 0xFFFFFFF0);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_queue_ap_read(swjdp, AP_REG_BD0 | (DCB_DCRDR & 0xC), value);
- if (retval != ERROR_OK)
- return retval;
-
- retval = dap_run(swjdp);
- if (retval != ERROR_OK)
- return retval;
-
- /* restore DCB_DCRDR - this needs to be in a seperate
- * transaction otherwise the emulated DCC channel breaks */
- if (retval == ERROR_OK)
- retval = mem_ap_write_atomic_u32(swjdp, DCB_DCRDR, dcrdr);
-
- return retval;
-}
-
-static int cortexm3_dap_write_coreregister_u32(struct adiv5_dap *swjdp,
- uint32_t value, int regnum)
-{
- int retval;
- uint32_t dcrdr;
-
- /* because the DCB_DCRDR is used for the emulated dcc channel
- * we have to save/restore the DCB_DCRDR when used */
-
- retval = mem_ap_read_u32(swjdp, DCB_DCRDR, &dcrdr);
- if (retval != ERROR_OK)
- return retval;
-
- /* mem_ap_write_u32(swjdp, DCB_DCRDR, core_regs[i]); */
- retval = dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRDR & 0xFFFFFFF0);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_queue_ap_write(swjdp, AP_REG_BD0 | (DCB_DCRDR & 0xC), value);
- // XXX check retval
-
- /* mem_ap_write_u32(swjdp, DCB_DCRSR, i | DCRSR_WnR); */
- retval = dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRSR & 0xFFFFFFF0);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_queue_ap_write(swjdp, AP_REG_BD0 | (DCB_DCRSR & 0xC), regnum | DCRSR_WnR);
- // XXX check retval
-
- retval = dap_run(swjdp);
-
- /* restore DCB_DCRDR - this needs to be in a seperate
- * transaction otherwise the emulated DCC channel breaks */
- if (retval == ERROR_OK)
- retval = mem_ap_write_atomic_u32(swjdp, DCB_DCRDR, dcrdr);
-
- return retval;
-}
-
-static int cortex_m3_write_debug_halt_mask(struct target *target,
- uint32_t mask_on, uint32_t mask_off)
-{
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
-
- /* mask off status bits */
- cortex_m3->dcb_dhcsr &= ~((0xFFFF << 16) | mask_off);
- /* create new register mask */
- cortex_m3->dcb_dhcsr |= DBGKEY | C_DEBUGEN | mask_on;
-
- return mem_ap_write_atomic_u32(swjdp, DCB_DHCSR, cortex_m3->dcb_dhcsr);
-}
-
-static int cortex_m3_clear_halt(struct target *target)
-{
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
- int retval;
-
- /* clear step if any */
- cortex_m3_write_debug_halt_mask(target, C_HALT, C_STEP);
-
- /* Read Debug Fault Status Register */
- retval = mem_ap_read_atomic_u32(swjdp, NVIC_DFSR, &cortex_m3->nvic_dfsr);
- if (retval != ERROR_OK)
- return retval;
-
- /* Clear Debug Fault Status */
- retval = mem_ap_write_atomic_u32(swjdp, NVIC_DFSR, cortex_m3->nvic_dfsr);
- if (retval != ERROR_OK)
- return retval;
- LOG_DEBUG(" NVIC_DFSR 0x%" PRIx32 "", cortex_m3->nvic_dfsr);
-
- return ERROR_OK;
-}
-
-static int cortex_m3_single_step_core(struct target *target)
-{
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
- uint32_t dhcsr_save;
- int retval;
-
- /* backup dhcsr reg */
- dhcsr_save = cortex_m3->dcb_dhcsr;
-
- /* Mask interrupts before clearing halt, if done already. This avoids
- * Erratum 377497 (fixed in r1p0) where setting MASKINTS while clearing
- * HALT can put the core into an unknown state.
- */
- if (!(cortex_m3->dcb_dhcsr & C_MASKINTS))
- {
- retval = mem_ap_write_atomic_u32(swjdp, DCB_DHCSR,
- DBGKEY | C_MASKINTS | C_HALT | C_DEBUGEN);
- if (retval != ERROR_OK)
- return retval;
- }
- retval = mem_ap_write_atomic_u32(swjdp, DCB_DHCSR,
- DBGKEY | C_MASKINTS | C_STEP | C_DEBUGEN);
- if (retval != ERROR_OK)
- return retval;
- LOG_DEBUG(" ");
-
- /* restore dhcsr reg */
- cortex_m3->dcb_dhcsr = dhcsr_save;
- cortex_m3_clear_halt(target);
-
- return ERROR_OK;
-}
-
-static int cortex_m3_endreset_event(struct target *target)
-{
- int i;
- int retval;
- uint32_t dcb_demcr;
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- struct armv7m_common *armv7m = &cortex_m3->armv7m;
- struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
- struct cortex_m3_fp_comparator *fp_list = cortex_m3->fp_comparator_list;
- struct cortex_m3_dwt_comparator *dwt_list = cortex_m3->dwt_comparator_list;
-
- /* REVISIT The four debug monitor bits are currently ignored... */
- retval = mem_ap_read_atomic_u32(swjdp, DCB_DEMCR, &dcb_demcr);
- if (retval != ERROR_OK)
- return retval;
- LOG_DEBUG("DCB_DEMCR = 0x%8.8" PRIx32 "",dcb_demcr);
-
- /* this register is used for emulated dcc channel */
- retval = mem_ap_write_u32(swjdp, DCB_DCRDR, 0);
- if (retval != ERROR_OK)
- return retval;
-
- /* Enable debug requests */
- retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
- if (retval != ERROR_OK)
- return retval;
- if (!(cortex_m3->dcb_dhcsr & C_DEBUGEN))
- {
- retval = mem_ap_write_u32(swjdp, DCB_DHCSR, DBGKEY | C_DEBUGEN);
- if (retval != ERROR_OK)
- return retval;
- }
-
- /* clear any interrupt masking */
- cortex_m3_write_debug_halt_mask(target, 0, C_MASKINTS);
-
- /* Enable features controlled by ITM and DWT blocks, and catch only
- * the vectors we were told to pay attention to.
- *
- * Target firmware is responsible for all fault handling policy
- * choices *EXCEPT* explicitly scripted overrides like "vector_catch"
- * or manual updates to the NVIC SHCSR and CCR registers.
- */
- retval = mem_ap_write_u32(swjdp, DCB_DEMCR, TRCENA | armv7m->demcr);
- if (retval != ERROR_OK)
- return retval;
-
- /* Paranoia: evidently some (early?) chips don't preserve all the
- * debug state (including FBP, DWT, etc) across reset...
- */
-
- /* Enable FPB */
- retval = target_write_u32(target, FP_CTRL, 3);
- if (retval != ERROR_OK)
- return retval;
-
- cortex_m3->fpb_enabled = 1;
-
- /* Restore FPB registers */
- for (i = 0; i < cortex_m3->fp_num_code + cortex_m3->fp_num_lit; i++)
- {
- retval = target_write_u32(target, fp_list[i].fpcr_address, fp_list[i].fpcr_value);
- if (retval != ERROR_OK)
- return retval;
- }
-
- /* Restore DWT registers */
- for (i = 0; i < cortex_m3->dwt_num_comp; i++)
- {
- retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 0,
- dwt_list[i].comp);
- if (retval != ERROR_OK)
- return retval;
- retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 4,
- dwt_list[i].mask);
- if (retval != ERROR_OK)
- return retval;
- retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 8,
- dwt_list[i].function);
- if (retval != ERROR_OK)
- return retval;
- }
- retval = dap_run(swjdp);
- if (retval != ERROR_OK)
- return retval;
-
- register_cache_invalidate(cortex_m3->armv7m.core_cache);
-
- /* make sure we have latest dhcsr flags */
- retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
-
- return retval;
-}
-
-static int cortex_m3_examine_debug_reason(struct target *target)
-{
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
-
- /* THIS IS NOT GOOD, TODO - better logic for detection of debug state reason */
- /* only check the debug reason if we don't know it already */
-
- if ((target->debug_reason != DBG_REASON_DBGRQ)
- && (target->debug_reason != DBG_REASON_SINGLESTEP))
- {
- if (cortex_m3->nvic_dfsr & DFSR_BKPT)
- {
- target->debug_reason = DBG_REASON_BREAKPOINT;
- if (cortex_m3->nvic_dfsr & DFSR_DWTTRAP)
- target->debug_reason = DBG_REASON_WPTANDBKPT;
- }
- else if (cortex_m3->nvic_dfsr & DFSR_DWTTRAP)
- target->debug_reason = DBG_REASON_WATCHPOINT;
- else if (cortex_m3->nvic_dfsr & DFSR_VCATCH)
- target->debug_reason = DBG_REASON_BREAKPOINT;
- else /* EXTERNAL, HALTED */
- target->debug_reason = DBG_REASON_UNDEFINED;
- }
-
- return ERROR_OK;
-}
-
-static int cortex_m3_examine_exception_reason(struct target *target)
-{
- uint32_t shcsr, except_sr, cfsr = -1, except_ar = -1;
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct adiv5_dap *swjdp = &armv7m->dap;
- int retval;
-
- retval = mem_ap_read_u32(swjdp, NVIC_SHCSR, &shcsr);
- if (retval != ERROR_OK)
- return retval;
- switch (armv7m->exception_number)
- {
- case 2: /* NMI */
- break;
- case 3: /* Hard Fault */
- retval = mem_ap_read_atomic_u32(swjdp, NVIC_HFSR, &except_sr);
- if (retval != ERROR_OK)
- return retval;
- if (except_sr & 0x40000000)
- {
- retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &cfsr);
- if (retval != ERROR_OK)
- return retval;
- }
- break;
- case 4: /* Memory Management */
- retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &except_sr);
- if (retval != ERROR_OK)
- return retval;
- retval = mem_ap_read_u32(swjdp, NVIC_MMFAR, &except_ar);
- if (retval != ERROR_OK)
- return retval;
- break;
- case 5: /* Bus Fault */
- retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &except_sr);
- if (retval != ERROR_OK)
- return retval;
- retval = mem_ap_read_u32(swjdp, NVIC_BFAR, &except_ar);
- if (retval != ERROR_OK)
- return retval;
- break;
- case 6: /* Usage Fault */
- retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &except_sr);
- if (retval != ERROR_OK)
- return retval;
- break;
- case 11: /* SVCall */
- break;
- case 12: /* Debug Monitor */
- retval = mem_ap_read_u32(swjdp, NVIC_DFSR, &except_sr);
- if (retval != ERROR_OK)
- return retval;
- break;
- case 14: /* PendSV */
- break;
- case 15: /* SysTick */
- break;
- default:
- except_sr = 0;
- break;
- }
- retval = dap_run(swjdp);
- if (retval == ERROR_OK)
- LOG_DEBUG("%s SHCSR 0x%" PRIx32 ", SR 0x%" PRIx32
- ", CFSR 0x%" PRIx32 ", AR 0x%" PRIx32,
- armv7m_exception_string(armv7m->exception_number),
- shcsr, except_sr, cfsr, except_ar);
- return retval;
-}
-
-/* PSP is used in some thread modes */
-static const int armv7m_psp_reg_map[17] = {
- ARMV7M_R0, ARMV7M_R1, ARMV7M_R2, ARMV7M_R3,
- ARMV7M_R4, ARMV7M_R5, ARMV7M_R6, ARMV7M_R7,
- ARMV7M_R8, ARMV7M_R9, ARMV7M_R10, ARMV7M_R11,
- ARMV7M_R12, ARMV7M_PSP, ARMV7M_R14, ARMV7M_PC,
- ARMV7M_xPSR,
-};
-
-/* MSP is used in handler and some thread modes */
-static const int armv7m_msp_reg_map[17] = {
- ARMV7M_R0, ARMV7M_R1, ARMV7M_R2, ARMV7M_R3,
- ARMV7M_R4, ARMV7M_R5, ARMV7M_R6, ARMV7M_R7,
- ARMV7M_R8, ARMV7M_R9, ARMV7M_R10, ARMV7M_R11,
- ARMV7M_R12, ARMV7M_MSP, ARMV7M_R14, ARMV7M_PC,
- ARMV7M_xPSR,
-};
-
-static int cortex_m3_debug_entry(struct target *target)
-{
- int i;
- uint32_t xPSR;
- int retval;
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- struct armv7m_common *armv7m = &cortex_m3->armv7m;
- struct arm *arm = &armv7m->arm;
- struct adiv5_dap *swjdp = &armv7m->dap;
- struct reg *r;
-
- LOG_DEBUG(" ");
-
- cortex_m3_clear_halt(target);
- retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
- if (retval != ERROR_OK)
- return retval;
-
- if ((retval = armv7m->examine_debug_reason(target)) != ERROR_OK)
- return retval;
-
- /* Examine target state and mode */
- /* First load register acessible through core debug port*/
- int num_regs = armv7m->core_cache->num_regs;
-
- for (i = 0; i < num_regs; i++)
- {
- if (!armv7m->core_cache->reg_list[i].valid)
- armv7m->read_core_reg(target, i);
- }
-
- r = armv7m->core_cache->reg_list + ARMV7M_xPSR;
- xPSR = buf_get_u32(r->value, 0, 32);
-
-#ifdef ARMV7_GDB_HACKS
- /* FIXME this breaks on scan chains with more than one Cortex-M3.
- * Instead, each CM3 should have its own dummy value...
- */
- /* copy real xpsr reg for gdb, setting thumb bit */
- buf_set_u32(armv7m_gdb_dummy_cpsr_value, 0, 32, xPSR);
- buf_set_u32(armv7m_gdb_dummy_cpsr_value, 5, 1, 1);
- armv7m_gdb_dummy_cpsr_reg.valid = r->valid;
- armv7m_gdb_dummy_cpsr_reg.dirty = r->dirty;
-#endif
-
- /* For IT instructions xPSR must be reloaded on resume and clear on debug exec */
- if (xPSR & 0xf00)
- {
- r->dirty = r->valid;
- cortex_m3_store_core_reg_u32(target, ARMV7M_REGISTER_CORE_GP, 16, xPSR &~ 0xff);
- }
-
- /* Are we in an exception handler */
- if (xPSR & 0x1FF)
- {
- armv7m->core_mode = ARMV7M_MODE_HANDLER;
- armv7m->exception_number = (xPSR & 0x1FF);
-
- arm->core_mode = ARM_MODE_HANDLER;
- arm->map = armv7m_msp_reg_map;
- }
- else
- {
- unsigned control = buf_get_u32(armv7m->core_cache
- ->reg_list[ARMV7M_CONTROL].value, 0, 2);
-
- /* is this thread privileged? */
- armv7m->core_mode = control & 1;
- arm->core_mode = armv7m->core_mode
- ? ARM_MODE_USER_THREAD
- : ARM_MODE_THREAD;
-
- /* which stack is it using? */
- if (control & 2)
- arm->map = armv7m_psp_reg_map;
- else
- arm->map = armv7m_msp_reg_map;
-
- armv7m->exception_number = 0;
- }
-
- if (armv7m->exception_number)
- {
- cortex_m3_examine_exception_reason(target);
- }
-
- LOG_DEBUG("entered debug state in core mode: %s at PC 0x%" PRIx32 ", target->state: %s",
- armv7m_mode_strings[armv7m->core_mode],
- *(uint32_t*)(arm->pc->value),
- target_state_name(target));
-
- if (armv7m->post_debug_entry)
- {
- retval = armv7m->post_debug_entry(target);
- if (retval != ERROR_OK)
- return retval;
- }
-
- return ERROR_OK;
-}
-
-static int cortex_m3_poll(struct target *target)
-{
- int detected_failure = ERROR_OK;
- int retval = ERROR_OK;
- enum target_state prev_target_state = target->state;
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
-
- /* Read from Debug Halting Control and Status Register */
- retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
- if (retval != ERROR_OK)
- {
- target->state = TARGET_UNKNOWN;
- return retval;
- }
-
- /* Recover from lockup. See ARMv7-M architecture spec,
- * section B1.5.15 "Unrecoverable exception cases".
- */
- if (cortex_m3->dcb_dhcsr & S_LOCKUP) {
- LOG_ERROR("%s -- clearing lockup after double fault",
- target_name(target));
- cortex_m3_write_debug_halt_mask(target, C_HALT, 0);
- target->debug_reason = DBG_REASON_DBGRQ;
-
- /* We have to execute the rest (the "finally" equivalent, but
- * still throw this exception again).
- */
- detected_failure = ERROR_FAIL;
-
- /* refresh status bits */
- retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
- if (retval != ERROR_OK)
- return retval;
- }
-
- if (cortex_m3->dcb_dhcsr & S_RESET_ST)
- {
- /* check if still in reset */
- retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
- if (retval != ERROR_OK)
- return retval;
-
- if (cortex_m3->dcb_dhcsr & S_RESET_ST)
- {
- target->state = TARGET_RESET;
- return ERROR_OK;
- }
- }
-
- if (target->state == TARGET_RESET)
- {
- /* Cannot switch context while running so endreset is
- * called with target->state == TARGET_RESET
- */
- LOG_DEBUG("Exit from reset with dcb_dhcsr 0x%" PRIx32,
- cortex_m3->dcb_dhcsr);
- cortex_m3_endreset_event(target);
- target->state = TARGET_RUNNING;
- prev_target_state = TARGET_RUNNING;
- }
-
- if (cortex_m3->dcb_dhcsr & S_HALT)
- {
- target->state = TARGET_HALTED;
-
- if ((prev_target_state == TARGET_RUNNING) || (prev_target_state == TARGET_RESET))
- {
- if ((retval = cortex_m3_debug_entry(target)) != ERROR_OK)
- return retval;
-
- if (arm_semihosting(target, &retval) != 0)
- return retval;
-
- target_call_event_callbacks(target, TARGET_EVENT_HALTED);
- }
- if (prev_target_state == TARGET_DEBUG_RUNNING)
- {
- LOG_DEBUG(" ");
- if ((retval = cortex_m3_debug_entry(target)) != ERROR_OK)
- return retval;
-
- target_call_event_callbacks(target, TARGET_EVENT_DEBUG_HALTED);
- }
- }
-
- /* REVISIT when S_SLEEP is set, it's in a Sleep or DeepSleep state.
- * How best to model low power modes?
- */
-
- if (target->state == TARGET_UNKNOWN)
- {
- /* check if processor is retiring instructions */
- if (cortex_m3->dcb_dhcsr & S_RETIRE_ST)
- {
- target->state = TARGET_RUNNING;
- retval = ERROR_OK;
- }
- }
-
- /* Did we detect a failure condition that we cleared? */
- if (detected_failure != ERROR_OK)
- retval = detected_failure;
- return retval;
-}
-
-static int cortex_m3_halt(struct target *target)
-{
- LOG_DEBUG("target->state: %s",
- target_state_name(target));
-
- if (target->state == TARGET_HALTED)
- {
- LOG_DEBUG("target was already halted");
- return ERROR_OK;
- }
-
- if (target->state == TARGET_UNKNOWN)
- {
- LOG_WARNING("target was in unknown state when halt was requested");
- }
-
- if (target->state == TARGET_RESET)
- {
- if ((jtag_get_reset_config() & RESET_SRST_PULLS_TRST) && jtag_get_srst())
- {
- LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
- return ERROR_TARGET_FAILURE;
- }
- else
- {
- /* we came here in a reset_halt or reset_init sequence
- * debug entry was already prepared in cortex_m3_prepare_reset_halt()
- */
- target->debug_reason = DBG_REASON_DBGRQ;
-
- return ERROR_OK;
- }
- }
-
- /* Write to Debug Halting Control and Status Register */
- cortex_m3_write_debug_halt_mask(target, C_HALT, 0);
-
- target->debug_reason = DBG_REASON_DBGRQ;
-
- return ERROR_OK;
-}
-
-static int cortex_m3_soft_reset_halt(struct target *target)
-{
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
- uint32_t dcb_dhcsr = 0;
- int retval, timeout = 0;
-
- /* Enter debug state on reset; restore DEMCR in endreset_event() */
- retval = mem_ap_write_u32(swjdp, DCB_DEMCR,
- TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
- if (retval != ERROR_OK)
- return retval;
-
- /* Request a core-only reset */
- retval = mem_ap_write_atomic_u32(swjdp, NVIC_AIRCR,
- AIRCR_VECTKEY | AIRCR_VECTRESET);
- if (retval != ERROR_OK)
- return retval;
- target->state = TARGET_RESET;
-
- /* registers are now invalid */
- register_cache_invalidate(cortex_m3->armv7m.core_cache);
-
- while (timeout < 100)
- {
- retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &dcb_dhcsr);
- if (retval == ERROR_OK)
- {
- retval = mem_ap_read_atomic_u32(swjdp, NVIC_DFSR,
- &cortex_m3->nvic_dfsr);
- if (retval != ERROR_OK)
- return retval;
- if ((dcb_dhcsr & S_HALT)
- && (cortex_m3->nvic_dfsr & DFSR_VCATCH))
- {
- LOG_DEBUG("system reset-halted, DHCSR 0x%08x, "
- "DFSR 0x%08x",
- (unsigned) dcb_dhcsr,
- (unsigned) cortex_m3->nvic_dfsr);
- cortex_m3_poll(target);
- /* FIXME restore user's vector catch config */
- return ERROR_OK;
- }
- else
- LOG_DEBUG("waiting for system reset-halt, "
- "DHCSR 0x%08x, %d ms",
- (unsigned) dcb_dhcsr, timeout);
- }
- timeout++;
- alive_sleep(1);
- }
-
- return ERROR_OK;
-}
-
-static void cortex_m3_enable_breakpoints(struct target *target)
-{
- struct breakpoint *breakpoint = target->breakpoints;
-
- /* set any pending breakpoints */
- while (breakpoint)
- {
- if (!breakpoint->set)
- cortex_m3_set_breakpoint(target, breakpoint);
- breakpoint = breakpoint->next;
- }
-}
-
-static int cortex_m3_resume(struct target *target, int current,
- uint32_t address, int handle_breakpoints, int debug_execution)
-{
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct breakpoint *breakpoint = NULL;
- uint32_t resume_pc;
- struct reg *r;
-
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (!debug_execution)
- {
- target_free_all_working_areas(target);
- cortex_m3_enable_breakpoints(target);
- cortex_m3_enable_watchpoints(target);
- }
-
- if (debug_execution)
- {
- r = armv7m->core_cache->reg_list + ARMV7M_PRIMASK;
-
- /* Disable interrupts */
- /* We disable interrupts in the PRIMASK register instead of
- * masking with C_MASKINTS. This is probably the same issue
- * as Cortex-M3 Erratum 377493 (fixed in r1p0): C_MASKINTS
- * in parallel with disabled interrupts can cause local faults
- * to not be taken.
- *
- * REVISIT this clearly breaks non-debug execution, since the
- * PRIMASK register state isn't saved/restored... workaround
- * by never resuming app code after debug execution.
- */
- buf_set_u32(r->value, 0, 1, 1);
- r->dirty = true;
- r->valid = true;
-
- /* Make sure we are in Thumb mode */
- r = armv7m->core_cache->reg_list + ARMV7M_xPSR;
- buf_set_u32(r->value, 24, 1, 1);
- r->dirty = true;
- r->valid = true;
- }
-
- /* current = 1: continue on current pc, otherwise continue at <address> */
- r = armv7m->arm.pc;
- if (!current)
- {
- buf_set_u32(r->value, 0, 32, address);
- r->dirty = true;
- r->valid = true;
- }
-
- /* if we halted last time due to a bkpt instruction
- * then we have to manually step over it, otherwise
- * the core will break again */
-
- if (!breakpoint_find(target, buf_get_u32(r->value, 0, 32))
- && !debug_execution)
- {
- armv7m_maybe_skip_bkpt_inst(target, NULL);
- }
-
- resume_pc = buf_get_u32(r->value, 0, 32);
-
- armv7m_restore_context(target);
-
- /* the front-end may request us not to handle breakpoints */
- if (handle_breakpoints)
- {
- /* Single step past breakpoint at current address */
- if ((breakpoint = breakpoint_find(target, resume_pc)))
- {
- LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32 " (ID: %d)",
- breakpoint->address,
- breakpoint->unique_id);
- cortex_m3_unset_breakpoint(target, breakpoint);
- cortex_m3_single_step_core(target);
- cortex_m3_set_breakpoint(target, breakpoint);
- }
- }
-
- /* Restart core */
- cortex_m3_write_debug_halt_mask(target, 0, C_HALT);
-
- target->debug_reason = DBG_REASON_NOTHALTED;
-
- /* registers are now invalid */
- register_cache_invalidate(armv7m->core_cache);
-
- if (!debug_execution)
- {
- target->state = TARGET_RUNNING;
- target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
- LOG_DEBUG("target resumed at 0x%" PRIx32 "", resume_pc);
- }
- else
- {
- target->state = TARGET_DEBUG_RUNNING;
- target_call_event_callbacks(target, TARGET_EVENT_DEBUG_RESUMED);
- LOG_DEBUG("target debug resumed at 0x%" PRIx32 "", resume_pc);
- }
-
- return ERROR_OK;
-}
-
-/* int irqstepcount = 0; */
-static int cortex_m3_step(struct target *target, int current,
- uint32_t address, int handle_breakpoints)
-{
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- struct armv7m_common *armv7m = &cortex_m3->armv7m;
- struct adiv5_dap *swjdp = &armv7m->dap;
- struct breakpoint *breakpoint = NULL;
- struct reg *pc = armv7m->arm.pc;
- bool bkpt_inst_found = false;
- int retval;
- bool isr_timed_out = false;
-
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- /* current = 1: continue on current pc, otherwise continue at <address> */
- if (!current)
- buf_set_u32(pc->value, 0, 32, address);
-
- uint32_t pc_value = buf_get_u32(pc->value, 0, 32);
-
- /* the front-end may request us not to handle breakpoints */
- if (handle_breakpoints) {
- breakpoint = breakpoint_find(target, pc_value);
- if (breakpoint)
- cortex_m3_unset_breakpoint(target, breakpoint);
- }
-
- armv7m_maybe_skip_bkpt_inst(target, &bkpt_inst_found);
-
- target->debug_reason = DBG_REASON_SINGLESTEP;
-
- armv7m_restore_context(target);
-
- target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
-
- /* if no bkpt instruction is found at pc then we can perform
- * a normal step, otherwise we have to manually step over the bkpt
- * instruction - as such simulate a step */
- if (bkpt_inst_found == false)
- {
- /* Automatic ISR masking mode off: Just step over the next instruction */
- if ((cortex_m3->isrmasking_mode != CORTEX_M3_ISRMASK_AUTO))
- {
- cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT);
- }
- else
- {
- /* Process interrupts during stepping in a way they don't interfere
- * debugging.
- *
- * Principle:
- *
- * Set a temporary break point at the current pc and let the core run
- * with interrupts enabled. Pending interrupts get served and we run
- * into the breakpoint again afterwards. Then we step over the next
- * instruction with interrupts disabled.
- *
- * If the pending interrupts don't complete within time, we leave the
- * core running. This may happen if the interrupts trigger faster
- * than the core can process them or the handler doesn't return.
- *
- * If no more breakpoints are available we simply do a step with
- * interrupts enabled.
- *
- */
-
- /* Set a temporary break point */
- retval = breakpoint_add(target, pc_value , 2, BKPT_TYPE_BY_ADDR(pc_value));
- bool tmp_bp_set = (retval == ERROR_OK);
-
- /* No more breakpoints left, just do a step */
- if (!tmp_bp_set)
- {
- cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT);
- }
- else
- {
- /* Start the core */
- LOG_DEBUG("Starting core to serve pending interrupts");
- int64_t t_start = timeval_ms();
- cortex_m3_write_debug_halt_mask(target, 0, C_HALT | C_STEP);
-
- /* Wait for pending handlers to complete or timeout */
- do {
- retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
- if (retval != ERROR_OK)
- {
- target->state = TARGET_UNKNOWN;
- return retval;
- }
- isr_timed_out = ((timeval_ms() - t_start) > 500);
- } while (!((cortex_m3->dcb_dhcsr & S_HALT) || isr_timed_out));
-
- /* Remove the temporary breakpoint */
- breakpoint_remove(target, pc_value);
-
- if (isr_timed_out)
- {
- LOG_DEBUG("Interrupt handlers didn't complete within time, "
- "leaving target running");
- }
- else
- {
- /* Step over next instruction with interrupts disabled */
- cortex_m3_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0);
- cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT);
- /* Re-enable interrupts */
- cortex_m3_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
- }
- }
- }
- }
-
- retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
- if (retval != ERROR_OK)
- return retval;
-
- /* registers are now invalid */
- register_cache_invalidate(cortex_m3->armv7m.core_cache);
-
- if (breakpoint)
- cortex_m3_set_breakpoint(target, breakpoint);
-
- if (isr_timed_out) {
- /* Leave the core running. The user has to stop execution manually. */
- target->debug_reason = DBG_REASON_NOTHALTED;
- target->state = TARGET_RUNNING;
- return ERROR_OK;
- }
-
- LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
- " nvic_icsr = 0x%" PRIx32,
- cortex_m3->dcb_dhcsr, cortex_m3->nvic_icsr);
-
- retval = cortex_m3_debug_entry(target);
- if (retval != ERROR_OK)
- return retval;
- target_call_event_callbacks(target, TARGET_EVENT_HALTED);
-
- LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
- " nvic_icsr = 0x%" PRIx32,
- cortex_m3->dcb_dhcsr, cortex_m3->nvic_icsr);
-
- return ERROR_OK;
-}
-
-static int cortex_m3_assert_reset(struct target *target)
-{
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
- enum cortex_m3_soft_reset_config reset_config = cortex_m3->soft_reset_config;
-
- LOG_DEBUG("target->state: %s",
- target_state_name(target));
-
- enum reset_types jtag_reset_config = jtag_get_reset_config();
-
- if (target_has_event_action(target, TARGET_EVENT_RESET_ASSERT)) {
- /* allow scripts to override the reset event */
-
- target_handle_event(target, TARGET_EVENT_RESET_ASSERT);
- register_cache_invalidate(cortex_m3->armv7m.core_cache);
- target->state = TARGET_RESET;
-
- return ERROR_OK;
- }
-
- /* Enable debug requests */
- int retval;
- retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
- if (retval != ERROR_OK)
- return retval;
- if (!(cortex_m3->dcb_dhcsr & C_DEBUGEN))
- {
- retval = mem_ap_write_u32(swjdp, DCB_DHCSR, DBGKEY | C_DEBUGEN);
- if (retval != ERROR_OK)
- return retval;
- }
-
- retval = mem_ap_write_u32(swjdp, DCB_DCRDR, 0);
- if (retval != ERROR_OK)
- return retval;
-
- if (!target->reset_halt)
- {
- /* Set/Clear C_MASKINTS in a separate operation */
- if (cortex_m3->dcb_dhcsr & C_MASKINTS)
- {
- retval = mem_ap_write_atomic_u32(swjdp, DCB_DHCSR,
- DBGKEY | C_DEBUGEN | C_HALT);
- if (retval != ERROR_OK)
- return retval;
- }
-
- /* clear any debug flags before resuming */
- cortex_m3_clear_halt(target);
-
- /* clear C_HALT in dhcsr reg */
- cortex_m3_write_debug_halt_mask(target, 0, C_HALT);
- }
- else
- {
- /* Halt in debug on reset; endreset_event() restores DEMCR.
- *
- * REVISIT catching BUSERR presumably helps to defend against
- * bad vector table entries. Should this include MMERR or
- * other flags too?
- */
- retval = mem_ap_write_atomic_u32(swjdp, DCB_DEMCR,
- TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
- if (retval != ERROR_OK)
- return retval;
- }
-
- if (jtag_reset_config & RESET_HAS_SRST)
- {
- /* default to asserting srst */
- if (jtag_reset_config & RESET_SRST_PULLS_TRST)
- {
- jtag_add_reset(1, 1);
- }
- else
- {
- jtag_add_reset(0, 1);
- }
- }
- else
- {
- /* Use a standard Cortex-M3 software reset mechanism.
- * We default to using VECRESET as it is supported on all current cores.
- * This has the disadvantage of not resetting the peripherals, so a
- * reset-init event handler is needed to perform any peripheral resets.
- */
- retval = mem_ap_write_atomic_u32(swjdp, NVIC_AIRCR,
- AIRCR_VECTKEY | ((reset_config == CORTEX_M3_RESET_SYSRESETREQ)
- ? AIRCR_SYSRESETREQ : AIRCR_VECTRESET));
- if (retval != ERROR_OK)
- return retval;
-
- LOG_DEBUG("Using Cortex-M3 %s", (reset_config == CORTEX_M3_RESET_SYSRESETREQ)
- ? "SYSRESETREQ" : "VECTRESET");
-
- if (reset_config == CORTEX_M3_RESET_VECTRESET) {
- LOG_WARNING("Only resetting the Cortex-M3 core, use a reset-init event "
- "handler to reset any peripherals");
- }
-
- {
- /* I do not know why this is necessary, but it
- * fixes strange effects (step/resume cause NMI
- * after reset) on LM3S6918 -- Michael Schwingen
- */
- uint32_t tmp;
- retval = mem_ap_read_atomic_u32(swjdp, NVIC_AIRCR, &tmp);
- if (retval != ERROR_OK)
- return retval;
- }
- }
-
- target->state = TARGET_RESET;
- jtag_add_sleep(50000);
-
- register_cache_invalidate(cortex_m3->armv7m.core_cache);
-
- if (target->reset_halt)
- {
- if ((retval = target_halt(target)) != ERROR_OK)
- return retval;
- }
-
- return ERROR_OK;
-}
-
-static int cortex_m3_deassert_reset(struct target *target)
-{
- LOG_DEBUG("target->state: %s",
- target_state_name(target));
-
- /* deassert reset lines */
- jtag_add_reset(0, 0);
-
- return ERROR_OK;
-}
-
-static int
-cortex_m3_set_breakpoint(struct target *target, struct breakpoint *breakpoint)
-{
- int retval;
- int fp_num = 0;
- uint32_t hilo;
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- struct cortex_m3_fp_comparator *comparator_list = cortex_m3->fp_comparator_list;
-
- if (breakpoint->set)
- {
- LOG_WARNING("breakpoint (BPID: %d) already set", breakpoint->unique_id);
- return ERROR_OK;
- }
-
- if (cortex_m3->auto_bp_type)
- {
- breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address);
- }
-
- if (breakpoint->type == BKPT_HARD)
- {
- while (comparator_list[fp_num].used && (fp_num < cortex_m3->fp_num_code))
- fp_num++;
- if (fp_num >= cortex_m3->fp_num_code)
- {
- LOG_ERROR("Can not find free FPB Comparator!");
- return ERROR_FAIL;
- }
- breakpoint->set = fp_num + 1;
- hilo = (breakpoint->address & 0x2) ? FPCR_REPLACE_BKPT_HIGH : FPCR_REPLACE_BKPT_LOW;
- comparator_list[fp_num].used = 1;
- comparator_list[fp_num].fpcr_value = (breakpoint->address & 0x1FFFFFFC) | hilo | 1;
- target_write_u32(target, comparator_list[fp_num].fpcr_address, comparator_list[fp_num].fpcr_value);
- LOG_DEBUG("fpc_num %i fpcr_value 0x%" PRIx32 "", fp_num, comparator_list[fp_num].fpcr_value);
- if (!cortex_m3->fpb_enabled)
- {
- LOG_DEBUG("FPB wasn't enabled, do it now");
- target_write_u32(target, FP_CTRL, 3);
- }
- }
- else if (breakpoint->type == BKPT_SOFT)
- {
- uint8_t code[4];
-
- /* NOTE: on ARMv6-M and ARMv7-M, BKPT(0xab) is used for
- * semihosting; don't use that. Otherwise the BKPT
- * parameter is arbitrary.
- */
- buf_set_u32(code, 0, 32, ARMV5_T_BKPT(0x11));
- retval = target_read_memory(target,
- breakpoint->address & 0xFFFFFFFE,
- breakpoint->length, 1,
- breakpoint->orig_instr);
- if (retval != ERROR_OK)
- return retval;
- retval = target_write_memory(target,
- breakpoint->address & 0xFFFFFFFE,
- breakpoint->length, 1,
- code);
- if (retval != ERROR_OK)
- return retval;
- breakpoint->set = true;
- }
-
- LOG_DEBUG("BPID: %d, Type: %d, Address: 0x%08" PRIx32 " Length: %d (set=%d)",
- breakpoint->unique_id,
- (int)(breakpoint->type),
- breakpoint->address,
- breakpoint->length,
- breakpoint->set);
-
- return ERROR_OK;
-}
-
-static int
-cortex_m3_unset_breakpoint(struct target *target, struct breakpoint *breakpoint)
-{
- int retval;
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- struct cortex_m3_fp_comparator * comparator_list = cortex_m3->fp_comparator_list;
-
- if (!breakpoint->set)
- {
- LOG_WARNING("breakpoint not set");
- return ERROR_OK;
- }
-
- LOG_DEBUG("BPID: %d, Type: %d, Address: 0x%08" PRIx32 " Length: %d (set=%d)",
- breakpoint->unique_id,
- (int)(breakpoint->type),
- breakpoint->address,
- breakpoint->length,
- breakpoint->set);
-
- if (breakpoint->type == BKPT_HARD)
- {
- int fp_num = breakpoint->set - 1;
- if ((fp_num < 0) || (fp_num >= cortex_m3->fp_num_code))
- {
- LOG_DEBUG("Invalid FP Comparator number in breakpoint");
- return ERROR_OK;
- }
- comparator_list[fp_num].used = 0;
- comparator_list[fp_num].fpcr_value = 0;
- target_write_u32(target, comparator_list[fp_num].fpcr_address, comparator_list[fp_num].fpcr_value);
- }
- else
- {
- /* restore original instruction (kept in target endianness) */
- if (breakpoint->length == 4)
- {
- if ((retval = target_write_memory(target, breakpoint->address & 0xFFFFFFFE, 4, 1, breakpoint->orig_instr)) != ERROR_OK)
- {
- return retval;
- }
- }
- else
- {
- if ((retval = target_write_memory(target, breakpoint->address & 0xFFFFFFFE, 2, 1, breakpoint->orig_instr)) != ERROR_OK)
- {
- return retval;
- }
- }
- }
- breakpoint->set = false;
-
- return ERROR_OK;
-}
-
-static int
-cortex_m3_add_breakpoint(struct target *target, struct breakpoint *breakpoint)
-{
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
-
- if (cortex_m3->auto_bp_type)
- {
- breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address);
-#ifdef ARMV7_GDB_HACKS
- if (breakpoint->length != 2) {
- /* XXX Hack: Replace all breakpoints with length != 2 with
- * a hardware breakpoint. */
- breakpoint->type = BKPT_HARD;
- breakpoint->length = 2;
- }
-#endif
- }
-
- if(breakpoint->type != BKPT_TYPE_BY_ADDR(breakpoint->address)) {
- if (breakpoint->type == BKPT_HARD)
- {
- LOG_INFO("flash patch comparator requested outside code memory region");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
-
- if (breakpoint->type == BKPT_SOFT)
- {
- LOG_INFO("soft breakpoint requested in code (flash) memory region");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
- }
-
- if ((breakpoint->type == BKPT_HARD) && (cortex_m3->fp_code_available < 1))
- {
- LOG_INFO("no flash patch comparator unit available for hardware breakpoint");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
-
- if ((breakpoint->length != 2))
- {
- LOG_INFO("only breakpoints of two bytes length supported");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
-
- if (breakpoint->type == BKPT_HARD)
- cortex_m3->fp_code_available--;
-
- return cortex_m3_set_breakpoint(target, breakpoint);
-}
-
-static int
-cortex_m3_remove_breakpoint(struct target *target, struct breakpoint *breakpoint)
-{
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
-
- /* REVISIT why check? FBP can be updated with core running ... */
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (cortex_m3->auto_bp_type)
- {
- breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address);
- }
-
- if (breakpoint->set)
- {
- cortex_m3_unset_breakpoint(target, breakpoint);
- }
-
- if (breakpoint->type == BKPT_HARD)
- cortex_m3->fp_code_available++;
-
- return ERROR_OK;
-}
-
-static int
-cortex_m3_set_watchpoint(struct target *target, struct watchpoint *watchpoint)
-{
- int dwt_num = 0;
- uint32_t mask, temp;
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
-
- /* watchpoint params were validated earlier */
- mask = 0;
- temp = watchpoint->length;
- while (temp) {
- temp >>= 1;
- mask++;
- }
- mask--;
-
- /* REVISIT Don't fully trust these "not used" records ... users
- * may set up breakpoints by hand, e.g. dual-address data value
- * watchpoint using comparator #1; comparator #0 matching cycle
- * count; send data trace info through ITM and TPIU; etc
- */
- struct cortex_m3_dwt_comparator *comparator;
-
- for (comparator = cortex_m3->dwt_comparator_list;
- comparator->used && dwt_num < cortex_m3->dwt_num_comp;
- comparator++, dwt_num++)
- continue;
- if (dwt_num >= cortex_m3->dwt_num_comp)
- {
- LOG_ERROR("Can not find free DWT Comparator");
- return ERROR_FAIL;
- }
- comparator->used = 1;
- watchpoint->set = dwt_num + 1;
-
- comparator->comp = watchpoint->address;
- target_write_u32(target, comparator->dwt_comparator_address + 0,
- comparator->comp);
-
- comparator->mask = mask;
- target_write_u32(target, comparator->dwt_comparator_address + 4,
- comparator->mask);
-
- switch (watchpoint->rw) {
- case WPT_READ:
- comparator->function = 5;
- break;
- case WPT_WRITE:
- comparator->function = 6;
- break;
- case WPT_ACCESS:
- comparator->function = 7;
- break;
- }
- target_write_u32(target, comparator->dwt_comparator_address + 8,
- comparator->function);
-
- LOG_DEBUG("Watchpoint (ID %d) DWT%d 0x%08x 0x%x 0x%05x",
- watchpoint->unique_id, dwt_num,
- (unsigned) comparator->comp,
- (unsigned) comparator->mask,
- (unsigned) comparator->function);
- return ERROR_OK;
-}
-
-static int
-cortex_m3_unset_watchpoint(struct target *target, struct watchpoint *watchpoint)
-{
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- struct cortex_m3_dwt_comparator *comparator;
- int dwt_num;
-
- if (!watchpoint->set)
- {
- LOG_WARNING("watchpoint (wpid: %d) not set",
- watchpoint->unique_id);
- return ERROR_OK;
- }
-
- dwt_num = watchpoint->set - 1;
-
- LOG_DEBUG("Watchpoint (ID %d) DWT%d address: 0x%08x clear",
- watchpoint->unique_id, dwt_num,
- (unsigned) watchpoint->address);
-
- if ((dwt_num < 0) || (dwt_num >= cortex_m3->dwt_num_comp))
- {
- LOG_DEBUG("Invalid DWT Comparator number in watchpoint");
- return ERROR_OK;
- }
-
- comparator = cortex_m3->dwt_comparator_list + dwt_num;
- comparator->used = 0;
- comparator->function = 0;
- target_write_u32(target, comparator->dwt_comparator_address + 8,
- comparator->function);
-
- watchpoint->set = false;
-
- return ERROR_OK;
-}
-
-static int
-cortex_m3_add_watchpoint(struct target *target, struct watchpoint *watchpoint)
-{
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
-
- if (cortex_m3->dwt_comp_available < 1)
- {
- LOG_DEBUG("no comparators?");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
-
- /* hardware doesn't support data value masking */
- if (watchpoint->mask != ~(uint32_t)0) {
- LOG_DEBUG("watchpoint value masks not supported");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
-
- /* hardware allows address masks of up to 32K */
- unsigned mask;
-
- for (mask = 0; mask < 16; mask++) {
- if ((1u << mask) == watchpoint->length)
- break;
- }
- if (mask == 16) {
- LOG_DEBUG("unsupported watchpoint length");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
- if (watchpoint->address & ((1 << mask) - 1)) {
- LOG_DEBUG("watchpoint address is unaligned");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
-
- /* Caller doesn't seem to be able to describe watching for data
- * values of zero; that flags "no value".
- *
- * REVISIT This DWT may well be able to watch for specific data
- * values. Requires comparator #1 to set DATAVMATCH and match
- * the data, and another comparator (DATAVADDR0) matching addr.
- */
- if (watchpoint->value) {
- LOG_DEBUG("data value watchpoint not YET supported");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
-
- cortex_m3->dwt_comp_available--;
- LOG_DEBUG("dwt_comp_available: %d", cortex_m3->dwt_comp_available);
-
- return ERROR_OK;
-}
-
-static int
-cortex_m3_remove_watchpoint(struct target *target, struct watchpoint *watchpoint)
-{
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
-
- /* REVISIT why check? DWT can be updated with core running ... */
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (watchpoint->set)
- {
- cortex_m3_unset_watchpoint(target, watchpoint);
- }
-
- cortex_m3->dwt_comp_available++;
- LOG_DEBUG("dwt_comp_available: %d", cortex_m3->dwt_comp_available);
-
- return ERROR_OK;
-}
-
-static void cortex_m3_enable_watchpoints(struct target *target)
-{
- struct watchpoint *watchpoint = target->watchpoints;
-
- /* set any pending watchpoints */
- while (watchpoint)
- {
- if (!watchpoint->set)
- cortex_m3_set_watchpoint(target, watchpoint);
- watchpoint = watchpoint->next;
- }
-}
-
-static int cortex_m3_load_core_reg_u32(struct target *target,
- enum armv7m_regtype type, uint32_t num, uint32_t * value)
-{
- int retval;
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct adiv5_dap *swjdp = &armv7m->dap;
-
- /* NOTE: we "know" here that the register identifiers used
- * in the v7m header match the Cortex-M3 Debug Core Register
- * Selector values for R0..R15, xPSR, MSP, and PSP.
- */
- switch (num) {
- case 0 ... 18:
- /* read a normal core register */
- retval = cortexm3_dap_read_coreregister_u32(swjdp, value, num);
-
- if (retval != ERROR_OK)
- {
- LOG_ERROR("JTAG failure %i",retval);
- return ERROR_JTAG_DEVICE_ERROR;
- }
- LOG_DEBUG("load from core reg %i value 0x%" PRIx32 "",(int)num,*value);
- break;
-
- case ARMV7M_PRIMASK:
- case ARMV7M_BASEPRI:
- case ARMV7M_FAULTMASK:
- case ARMV7M_CONTROL:
- /* Cortex-M3 packages these four registers as bitfields
- * in one Debug Core register. So say r0 and r2 docs;
- * it was removed from r1 docs, but still works.
- */
- cortexm3_dap_read_coreregister_u32(swjdp, value, 20);
-
- switch (num)
- {
- case ARMV7M_PRIMASK:
- *value = buf_get_u32((uint8_t*)value, 0, 1);
- break;
-
- case ARMV7M_BASEPRI:
- *value = buf_get_u32((uint8_t*)value, 8, 8);
- break;
-
- case ARMV7M_FAULTMASK:
- *value = buf_get_u32((uint8_t*)value, 16, 1);
- break;
-
- case ARMV7M_CONTROL:
- *value = buf_get_u32((uint8_t*)value, 24, 2);
- break;
- }
-
- LOG_DEBUG("load from special reg %i value 0x%" PRIx32 "", (int)num, *value);
- break;
-
- default:
- return ERROR_INVALID_ARGUMENTS;
- }
-
- return ERROR_OK;
-}
-
-static int cortex_m3_store_core_reg_u32(struct target *target,
- enum armv7m_regtype type, uint32_t num, uint32_t value)
-{
- int retval;
- uint32_t reg;
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct adiv5_dap *swjdp = &armv7m->dap;
-
-#ifdef ARMV7_GDB_HACKS
- /* If the LR register is being modified, make sure it will put us
- * in "thumb" mode, or an INVSTATE exception will occur. This is a
- * hack to deal with the fact that gdb will sometimes "forge"
- * return addresses, and doesn't set the LSB correctly (i.e., when
- * printing expressions containing function calls, it sets LR = 0.)
- * Valid exception return codes have bit 0 set too.
- */
- if (num == ARMV7M_R14)
- value |= 0x01;
-#endif
-
- /* NOTE: we "know" here that the register identifiers used
- * in the v7m header match the Cortex-M3 Debug Core Register
- * Selector values for R0..R15, xPSR, MSP, and PSP.
- */
- switch (num) {
- case 0 ... 18:
- retval = cortexm3_dap_write_coreregister_u32(swjdp, value, num);
- if (retval != ERROR_OK)
- {
- struct reg *r;
-
- LOG_ERROR("JTAG failure");
- r = armv7m->core_cache->reg_list + num;
- r->dirty = r->valid;
- return ERROR_JTAG_DEVICE_ERROR;
- }
- LOG_DEBUG("write core reg %i value 0x%" PRIx32 "", (int)num, value);
- break;
-
- case ARMV7M_PRIMASK:
- case ARMV7M_BASEPRI:
- case ARMV7M_FAULTMASK:
- case ARMV7M_CONTROL:
- /* Cortex-M3 packages these four registers as bitfields
- * in one Debug Core register. So say r0 and r2 docs;
- * it was removed from r1 docs, but still works.
- */
- cortexm3_dap_read_coreregister_u32(swjdp, ®, 20);
-
- switch (num)
- {
- case ARMV7M_PRIMASK:
- buf_set_u32((uint8_t*)®, 0, 1, value);
- break;
-
- case ARMV7M_BASEPRI:
- buf_set_u32((uint8_t*)®, 8, 8, value);
- break;
-
- case ARMV7M_FAULTMASK:
- buf_set_u32((uint8_t*)®, 16, 1, value);
- break;
-
- case ARMV7M_CONTROL:
- buf_set_u32((uint8_t*)®, 24, 2, value);
- break;
- }
-
- cortexm3_dap_write_coreregister_u32(swjdp, reg, 20);
-
- LOG_DEBUG("write special reg %i value 0x%" PRIx32 " ", (int)num, value);
- break;
-
- default:
- return ERROR_INVALID_ARGUMENTS;
- }
-
- return ERROR_OK;
-}
-
-static int cortex_m3_read_memory(struct target *target, uint32_t address,
- uint32_t size, uint32_t count, uint8_t *buffer)
-{
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct adiv5_dap *swjdp = &armv7m->dap;
- int retval = ERROR_INVALID_ARGUMENTS;
-
- /* cortex_m3 handles unaligned memory access */
- if (count && buffer) {
- switch (size) {
- case 4:
- retval = mem_ap_read_buf_u32(swjdp, buffer, 4 * count, address);
- break;
- case 2:
- retval = mem_ap_read_buf_u16(swjdp, buffer, 2 * count, address);
- break;
- case 1:
- retval = mem_ap_read_buf_u8(swjdp, buffer, count, address);
- break;
- }
- }
-
- return retval;
-}
-
-static int cortex_m3_write_memory(struct target *target, uint32_t address,
- uint32_t size, uint32_t count, const uint8_t *buffer)
-{
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct adiv5_dap *swjdp = &armv7m->dap;
- int retval = ERROR_INVALID_ARGUMENTS;
-
- if (count && buffer) {
- switch (size) {
- case 4:
- retval = mem_ap_write_buf_u32(swjdp, buffer, 4 * count, address);
- break;
- case 2:
- retval = mem_ap_write_buf_u16(swjdp, buffer, 2 * count, address);
- break;
- case 1:
- retval = mem_ap_write_buf_u8(swjdp, buffer, count, address);
- break;
- }
- }
-
- return retval;
-}
-
-static int cortex_m3_bulk_write_memory(struct target *target, uint32_t address,
- uint32_t count, const uint8_t *buffer)
-{
- return cortex_m3_write_memory(target, address, 4, count, buffer);
-}
-
-static int cortex_m3_init_target(struct command_context *cmd_ctx,
- struct target *target)
-{
- armv7m_build_reg_cache(target);
- return ERROR_OK;
-}
-
-/* REVISIT cache valid/dirty bits are unmaintained. We could set "valid"
- * on r/w if the core is not running, and clear on resume or reset ... or
- * at least, in a post_restore_context() method.
- */
-
-struct dwt_reg_state {
- struct target *target;
- uint32_t addr;
- uint32_t value; /* scratch/cache */
-};
-
-static int cortex_m3_dwt_get_reg(struct reg *reg)
-{
- struct dwt_reg_state *state = reg->arch_info;
-
- return target_read_u32(state->target, state->addr, &state->value);
-}
-
-static int cortex_m3_dwt_set_reg(struct reg *reg, uint8_t *buf)
-{
- struct dwt_reg_state *state = reg->arch_info;
-
- return target_write_u32(state->target, state->addr,
- buf_get_u32(buf, 0, reg->size));
-}
-
-struct dwt_reg {
- uint32_t addr;
- char *name;
- unsigned size;
-};
-
-static struct dwt_reg dwt_base_regs[] = {
- { DWT_CTRL, "dwt_ctrl", 32, },
- /* NOTE that Erratum 532314 (fixed r2p0) affects CYCCNT: it wrongly
- * increments while the core is asleep.
- */
- { DWT_CYCCNT, "dwt_cyccnt", 32, },
- /* plus some 8 bit counters, useful for profiling with TPIU */
-};
-
-static struct dwt_reg dwt_comp[] = {
-#define DWT_COMPARATOR(i) \
- { DWT_COMP0 + 0x10 * (i), "dwt_" #i "_comp", 32, }, \
- { DWT_MASK0 + 0x10 * (i), "dwt_" #i "_mask", 4, }, \
- { DWT_FUNCTION0 + 0x10 * (i), "dwt_" #i "_function", 32, }
- DWT_COMPARATOR(0),
- DWT_COMPARATOR(1),
- DWT_COMPARATOR(2),
- DWT_COMPARATOR(3),
-#undef DWT_COMPARATOR
-};
-
-static const struct reg_arch_type dwt_reg_type = {
- .get = cortex_m3_dwt_get_reg,
- .set = cortex_m3_dwt_set_reg,
-};
-
-static void
-cortex_m3_dwt_addreg(struct target *t, struct reg *r, struct dwt_reg *d)
-{
- struct dwt_reg_state *state;
-
- state = calloc(1, sizeof *state);
- if (!state)
- return;
- state->addr = d->addr;
- state->target = t;
-
- r->name = d->name;
- r->size = d->size;
- r->value = &state->value;
- r->arch_info = state;
- r->type = &dwt_reg_type;
-}
-
-static void
-cortex_m3_dwt_setup(struct cortex_m3_common *cm3, struct target *target)
-{
- uint32_t dwtcr;
- struct reg_cache *cache;
- struct cortex_m3_dwt_comparator *comparator;
- int reg, i;
-
- target_read_u32(target, DWT_CTRL, &dwtcr);
- if (!dwtcr) {
- LOG_DEBUG("no DWT");
- return;
- }
-
- cm3->dwt_num_comp = (dwtcr >> 28) & 0xF;
- cm3->dwt_comp_available = cm3->dwt_num_comp;
- cm3->dwt_comparator_list = calloc(cm3->dwt_num_comp,
- sizeof(struct cortex_m3_dwt_comparator));
- if (!cm3->dwt_comparator_list) {
-fail0:
- cm3->dwt_num_comp = 0;
- LOG_ERROR("out of mem");
- return;
- }
-
- cache = calloc(1, sizeof *cache);
- if (!cache) {
-fail1:
- free(cm3->dwt_comparator_list);
- goto fail0;
- }
- cache->name = "cortex-m3 dwt registers";
- cache->num_regs = 2 + cm3->dwt_num_comp * 3;
- cache->reg_list = calloc(cache->num_regs, sizeof *cache->reg_list);
- if (!cache->reg_list) {
- free(cache);
- goto fail1;
- }
-
- for (reg = 0; reg < 2; reg++)
- cortex_m3_dwt_addreg(target, cache->reg_list + reg,
- dwt_base_regs + reg);
-
- comparator = cm3->dwt_comparator_list;
- for (i = 0; i < cm3->dwt_num_comp; i++, comparator++) {
- int j;
-
- comparator->dwt_comparator_address = DWT_COMP0 + 0x10 * i;
- for (j = 0; j < 3; j++, reg++)
- cortex_m3_dwt_addreg(target, cache->reg_list + reg,
- dwt_comp + 3 * i + j);
- }
-
- *register_get_last_cache_p(&target->reg_cache) = cache;
- cm3->dwt_cache = cache;
-
- LOG_DEBUG("DWT dwtcr 0x%" PRIx32 ", comp %d, watch%s",
- dwtcr, cm3->dwt_num_comp,
- (dwtcr & (0xf << 24)) ? " only" : "/trigger");
-
- /* REVISIT: if num_comp > 1, check whether comparator #1 can
- * implement single-address data value watchpoints ... so we
- * won't need to check it later, when asked to set one up.
- */
-}
-
-static int cortex_m3_examine(struct target *target)
-{
- int retval;
- uint32_t cpuid, fpcr;
- int i;
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
-
- if ((retval = ahbap_debugport_init(swjdp)) != ERROR_OK)
- return retval;
-
- if (!target_was_examined(target))
- {
- target_set_examined(target);
-
- /* Read from Device Identification Registers */
- retval = target_read_u32(target, CPUID, &cpuid);
- if (retval != ERROR_OK)
- return retval;
-
- if (((cpuid >> 4) & 0xc3f) == 0xc23)
- LOG_DEBUG("Cortex-M3 r%" PRId8 "p%" PRId8 " processor detected",
- (uint8_t)((cpuid >> 20) & 0xf), (uint8_t)((cpuid >> 0) & 0xf));
- LOG_DEBUG("cpuid: 0x%8.8" PRIx32 "", cpuid);
-
- /* NOTE: FPB and DWT are both optional. */
-
- /* Setup FPB */
- target_read_u32(target, FP_CTRL, &fpcr);
- cortex_m3->auto_bp_type = 1;
- cortex_m3->fp_num_code = ((fpcr >> 8) & 0x70) | ((fpcr >> 4) & 0xF); /* bits [14:12] and [7:4] */
- cortex_m3->fp_num_lit = (fpcr >> 8) & 0xF;
- cortex_m3->fp_code_available = cortex_m3->fp_num_code;
- cortex_m3->fp_comparator_list = calloc(cortex_m3->fp_num_code + cortex_m3->fp_num_lit, sizeof(struct cortex_m3_fp_comparator));
- cortex_m3->fpb_enabled = fpcr & 1;
- for (i = 0; i < cortex_m3->fp_num_code + cortex_m3->fp_num_lit; i++)
- {
- cortex_m3->fp_comparator_list[i].type = (i < cortex_m3->fp_num_code) ? FPCR_CODE : FPCR_LITERAL;
- cortex_m3->fp_comparator_list[i].fpcr_address = FP_COMP0 + 4 * i;
- }
- LOG_DEBUG("FPB fpcr 0x%" PRIx32 ", numcode %i, numlit %i", fpcr, cortex_m3->fp_num_code, cortex_m3->fp_num_lit);
-
- /* Setup DWT */
- cortex_m3_dwt_setup(cortex_m3, target);
-
- /* These hardware breakpoints only work for code in flash! */
- LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
- target_name(target),
- cortex_m3->fp_num_code,
- cortex_m3->dwt_num_comp);
- }
-
- return ERROR_OK;
-}
-
-static int cortex_m3_dcc_read(struct adiv5_dap *swjdp, uint8_t *value, uint8_t *ctrl)
-{
- uint16_t dcrdr;
- int retval;
-
- mem_ap_read_buf_u16(swjdp, (uint8_t*)&dcrdr, 1, DCB_DCRDR);
- *ctrl = (uint8_t)dcrdr;
- *value = (uint8_t)(dcrdr >> 8);
-
- LOG_DEBUG("data 0x%x ctrl 0x%x", *value, *ctrl);
-
- /* write ack back to software dcc register
- * signify we have read data */
- if (dcrdr & (1 << 0))
- {
- dcrdr = 0;
- retval = mem_ap_write_buf_u16(swjdp, (uint8_t*)&dcrdr, 1, DCB_DCRDR);
- if (retval != ERROR_OK)
- return retval;
- }
-
- return ERROR_OK;
-}
-
-static int cortex_m3_target_request_data(struct target *target,
- uint32_t size, uint8_t *buffer)
-{
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct adiv5_dap *swjdp = &armv7m->dap;
- uint8_t data;
- uint8_t ctrl;
- uint32_t i;
-
- for (i = 0; i < (size * 4); i++)
- {
- cortex_m3_dcc_read(swjdp, &data, &ctrl);
- buffer[i] = data;
- }
-
- return ERROR_OK;
-}
-
-static int cortex_m3_handle_target_request(void *priv)
-{
- struct target *target = priv;
- if (!target_was_examined(target))
- return ERROR_OK;
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct adiv5_dap *swjdp = &armv7m->dap;
-
- if (!target->dbg_msg_enabled)
- return ERROR_OK;
-
- if (target->state == TARGET_RUNNING)
- {
- uint8_t data;
- uint8_t ctrl;
-
- cortex_m3_dcc_read(swjdp, &data, &ctrl);
-
- /* check if we have data */
- if (ctrl & (1 << 0))
- {
- uint32_t request;
-
- /* we assume target is quick enough */
- request = data;
- cortex_m3_dcc_read(swjdp, &data, &ctrl);
- request |= (data << 8);
- cortex_m3_dcc_read(swjdp, &data, &ctrl);
- request |= (data << 16);
- cortex_m3_dcc_read(swjdp, &data, &ctrl);
- request |= (data << 24);
- target_request(target, request);
- }
- }
-
- return ERROR_OK;
-}
-
-static int cortex_m3_init_arch_info(struct target *target,
- struct cortex_m3_common *cortex_m3, struct jtag_tap *tap)
-{
- int retval;
- struct armv7m_common *armv7m = &cortex_m3->armv7m;
-
- armv7m_init_arch_info(target, armv7m);
-
- /* prepare JTAG information for the new target */
- cortex_m3->jtag_info.tap = tap;
- cortex_m3->jtag_info.scann_size = 4;
-
- /* default reset mode is to use srst if fitted
- * if not it will use CORTEX_M3_RESET_VECTRESET */
- cortex_m3->soft_reset_config = CORTEX_M3_RESET_VECTRESET;
-
- armv7m->arm.dap = &armv7m->dap;
-
- /* Leave (only) generic DAP stuff for debugport_init(); */
- armv7m->dap.jtag_info = &cortex_m3->jtag_info;
- armv7m->dap.memaccess_tck = 8;
- /* Cortex-M3 has 4096 bytes autoincrement range */
- armv7m->dap.tar_autoincr_block = (1 << 12);
-
- /* register arch-specific functions */
- armv7m->examine_debug_reason = cortex_m3_examine_debug_reason;
-
- armv7m->post_debug_entry = NULL;
-
- armv7m->pre_restore_context = NULL;
-
- armv7m->load_core_reg_u32 = cortex_m3_load_core_reg_u32;
- armv7m->store_core_reg_u32 = cortex_m3_store_core_reg_u32;
-
- target_register_timer_callback(cortex_m3_handle_target_request, 1, 1, target);
-
- if ((retval = arm_jtag_setup_connection(&cortex_m3->jtag_info)) != ERROR_OK)
- {
- return retval;
- }
-
- return ERROR_OK;
-}
-
-static int cortex_m3_target_create(struct target *target, Jim_Interp *interp)
-{
- struct cortex_m3_common *cortex_m3 = calloc(1,sizeof(struct cortex_m3_common));
-
- cortex_m3->common_magic = CORTEX_M3_COMMON_MAGIC;
- cortex_m3_init_arch_info(target, cortex_m3, target->tap);
-
- return ERROR_OK;
-}
-
-/*--------------------------------------------------------------------------*/
-
-static int cortex_m3_verify_pointer(struct command_context *cmd_ctx,
- struct cortex_m3_common *cm3)
-{
- if (cm3->common_magic != CORTEX_M3_COMMON_MAGIC) {
- command_print(cmd_ctx, "target is not a Cortex-M3");
- return ERROR_TARGET_INVALID;
- }
- return ERROR_OK;
-}
-
-/*
- * Only stuff below this line should need to verify that its target
- * is a Cortex-M3. Everything else should have indirected through the
- * cortexm3_target structure, which is only used with CM3 targets.
- */
-
-static const struct {
- char name[10];
- unsigned mask;
-} vec_ids[] = {
- { "hard_err", VC_HARDERR, },
- { "int_err", VC_INTERR, },
- { "bus_err", VC_BUSERR, },
- { "state_err", VC_STATERR, },
- { "chk_err", VC_CHKERR, },
- { "nocp_err", VC_NOCPERR, },
- { "mm_err", VC_MMERR, },
- { "reset", VC_CORERESET, },
-};
-
-COMMAND_HANDLER(handle_cortex_m3_vector_catch_command)
-{
- struct target *target = get_current_target(CMD_CTX);
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- struct armv7m_common *armv7m = &cortex_m3->armv7m;
- struct adiv5_dap *swjdp = &armv7m->dap;
- uint32_t demcr = 0;
- int retval;
-
- retval = cortex_m3_verify_pointer(CMD_CTX, cortex_m3);
- if (retval != ERROR_OK)
- return retval;
-
- retval = mem_ap_read_atomic_u32(swjdp, DCB_DEMCR, &demcr);
- if (retval != ERROR_OK)
- return retval;
-
- if (CMD_ARGC > 0) {
- unsigned catch = 0;
-
- if (CMD_ARGC == 1) {
- if (strcmp(CMD_ARGV[0], "all") == 0) {
- catch = VC_HARDERR | VC_INTERR | VC_BUSERR
- | VC_STATERR | VC_CHKERR | VC_NOCPERR
- | VC_MMERR | VC_CORERESET;
- goto write;
- } else if (strcmp(CMD_ARGV[0], "none") == 0) {
- goto write;
- }
- }
- while (CMD_ARGC-- > 0) {
- unsigned i;
- for (i = 0; i < ARRAY_SIZE(vec_ids); i++) {
- if (strcmp(CMD_ARGV[CMD_ARGC], vec_ids[i].name) != 0)
- continue;
- catch |= vec_ids[i].mask;
- break;
- }
- if (i == ARRAY_SIZE(vec_ids)) {
- LOG_ERROR("No CM3 vector '%s'", CMD_ARGV[CMD_ARGC]);
- return ERROR_INVALID_ARGUMENTS;
- }
- }
-write:
- /* For now, armv7m->demcr only stores vector catch flags. */
- armv7m->demcr = catch;
-
- demcr &= ~0xffff;
- demcr |= catch;
-
- /* write, but don't assume it stuck (why not??) */
- retval = mem_ap_write_u32(swjdp, DCB_DEMCR, demcr);
- if (retval != ERROR_OK)
- return retval;
- retval = mem_ap_read_atomic_u32(swjdp, DCB_DEMCR, &demcr);
- if (retval != ERROR_OK)
- return retval;
-
- /* FIXME be sure to clear DEMCR on clean server shutdown.
- * Otherwise the vector catch hardware could fire when there's
- * no debugger hooked up, causing much confusion...
- */
- }
-
- for (unsigned i = 0; i < ARRAY_SIZE(vec_ids); i++)
- {
- command_print(CMD_CTX, "%9s: %s", vec_ids[i].name,
- (demcr & vec_ids[i].mask) ? "catch" : "ignore");
- }
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(handle_cortex_m3_mask_interrupts_command)
-{
- struct target *target = get_current_target(CMD_CTX);
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- int retval;
-
- static const Jim_Nvp nvp_maskisr_modes[] = {
- { .name = "auto", .value = CORTEX_M3_ISRMASK_AUTO },
- { .name = "off" , .value = CORTEX_M3_ISRMASK_OFF },
- { .name = "on" , .value = CORTEX_M3_ISRMASK_ON },
- { .name = NULL , .value = -1 },
- };
- const Jim_Nvp *n;
-
-
- retval = cortex_m3_verify_pointer(CMD_CTX, cortex_m3);
- if (retval != ERROR_OK)
- return retval;
-
- if (target->state != TARGET_HALTED)
- {
- command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
- return ERROR_OK;
- }
-
- if (CMD_ARGC > 0)
- {
- n = Jim_Nvp_name2value_simple(nvp_maskisr_modes, CMD_ARGV[0]);
- if (n->name == NULL)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
- cortex_m3->isrmasking_mode = n->value;
-
-
- if(cortex_m3->isrmasking_mode == CORTEX_M3_ISRMASK_ON)
- {
- cortex_m3_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0);
- }
- else
- {
- cortex_m3_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
- }
- }
-
- n = Jim_Nvp_value2name_simple(nvp_maskisr_modes, cortex_m3->isrmasking_mode);
- command_print(CMD_CTX, "cortex_m3 interrupt mask %s", n->name);
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(handle_cortex_m3_reset_config_command)
-{
- struct target *target = get_current_target(CMD_CTX);
- struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
- int retval;
- char *reset_config;
-
- retval = cortex_m3_verify_pointer(CMD_CTX, cortex_m3);
- if (retval != ERROR_OK)
- return retval;
-
- if (CMD_ARGC > 0)
- {
- if (strcmp(*CMD_ARGV, "sysresetreq") == 0)
- cortex_m3->soft_reset_config = CORTEX_M3_RESET_SYSRESETREQ;
- else if (strcmp(*CMD_ARGV, "vectreset") == 0)
- cortex_m3->soft_reset_config = CORTEX_M3_RESET_VECTRESET;
- }
-
- switch (cortex_m3->soft_reset_config)
- {
- case CORTEX_M3_RESET_SYSRESETREQ:
- reset_config = "sysresetreq";
- break;
-
- case CORTEX_M3_RESET_VECTRESET:
- reset_config = "vectreset";
- break;
-
- default:
- reset_config = "unknown";
- break;
- }
-
- command_print(CMD_CTX, "cortex_m3 reset_config %s", reset_config);
-
- return ERROR_OK;
-}
-
-static const struct command_registration cortex_m3_exec_command_handlers[] = {
- {
- .name = "maskisr",
- .handler = handle_cortex_m3_mask_interrupts_command,
- .mode = COMMAND_EXEC,
- .help = "mask cortex_m3 interrupts",
- .usage = "['auto'|'on'|'off']",
- },
- {
- .name = "vector_catch",
- .handler = handle_cortex_m3_vector_catch_command,
- .mode = COMMAND_EXEC,
- .help = "configure hardware vectors to trigger debug entry",
- .usage = "['all'|'none'|('bus_err'|'chk_err'|...)*]",
- },
- {
- .name = "reset_config",
- .handler = handle_cortex_m3_reset_config_command,
- .mode = COMMAND_ANY,
- .help = "configure software reset handling",
- .usage = "['srst'|'sysresetreq'|'vectreset']",
- },
- COMMAND_REGISTRATION_DONE
-};
-static const struct command_registration cortex_m3_command_handlers[] = {
- {
- .chain = armv7m_command_handlers,
- },
- {
- .name = "cortex_m3",
- .mode = COMMAND_EXEC,
- .help = "Cortex-M3 command group",
- .chain = cortex_m3_exec_command_handlers,
- },
- COMMAND_REGISTRATION_DONE
-};
-
-struct target_type cortexm3_target =
-{
- .name = "cortex_m3",
-
- .poll = cortex_m3_poll,
- .arch_state = armv7m_arch_state,
-
- .target_request_data = cortex_m3_target_request_data,
-
- .halt = cortex_m3_halt,
- .resume = cortex_m3_resume,
- .step = cortex_m3_step,
-
- .assert_reset = cortex_m3_assert_reset,
- .deassert_reset = cortex_m3_deassert_reset,
- .soft_reset_halt = cortex_m3_soft_reset_halt,
-
- .get_gdb_reg_list = armv7m_get_gdb_reg_list,
-
- .read_memory = cortex_m3_read_memory,
- .write_memory = cortex_m3_write_memory,
- .bulk_write_memory = cortex_m3_bulk_write_memory,
- .checksum_memory = armv7m_checksum_memory,
- .blank_check_memory = armv7m_blank_check_memory,
-
- .run_algorithm = armv7m_run_algorithm,
- .start_algorithm = armv7m_start_algorithm,
- .wait_algorithm = armv7m_wait_algorithm,
-
- .add_breakpoint = cortex_m3_add_breakpoint,
- .remove_breakpoint = cortex_m3_remove_breakpoint,
- .add_watchpoint = cortex_m3_add_watchpoint,
- .remove_watchpoint = cortex_m3_remove_watchpoint,
-
- .commands = cortex_m3_command_handlers,
- .target_create = cortex_m3_target_create,
- .init_target = cortex_m3_init_target,
- .examine = cortex_m3_examine,
-};
Code Review / openocd.git / blobdiff