ARM: only use one set of dummy FPA registers
[openocd.git] / src / target / cortex_m3.h
index 7061d668ab1607fafd24a38a9537da684916ea2b..7ce89014bbbc8eec7ca5705ed769892203f543a5 100644 (file)
@@ -1,9 +1,13 @@
 /***************************************************************************
  *   Copyright (C) 2005 by Dominic Rath                                    *
  *   Dominic.Rath@gmx.de                                                   *
+ *                                                                         *
  *   Copyright (C) 2006 by Magnus Lundin                                   *
  *   lundin@mlu.mine.nu                                                    *
  *                                                                         *
+ *   Copyright (C) 2008 by Spencer Oliver                                  *
+ *   spen@spen-soft.co.uk                                                  *
+ *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License as published by  *
  *   the Free Software Foundation; either version 2 of the License, or     *
 #ifndef CORTEX_M3_H
 #define CORTEX_M3_H
 
-#include "register.h"
-#include "target.h"
 #include "armv7m.h"
-#include "cortex_swjdp.h"
 
-extern char* cortex_m3_state_strings[];
 
 #define CORTEX_M3_COMMON_MAGIC 0x1A451A45
 
@@ -40,9 +40,10 @@ extern char* cortex_m3_state_strings[];
 #define DCB_DCRDR      0xE000EDF8
 #define DCB_DEMCR      0xE000EDFC
 
-#define DCRSR_WnR      (1<<16) 
+#define DCRSR_WnR      (1 << 16)
 
 #define DWT_CTRL       0xE0001000
+#define DWT_CYCCNT     0xE0001004
 #define DWT_COMP0      0xE0001020
 #define DWT_MASK0      0xE0001024
 #define DWT_FUNCTION0  0xE0001028
@@ -58,26 +59,29 @@ extern char* cortex_m3_state_strings[];
 #define FP_COMP6       0xE0002020
 #define FP_COMP7       0xE0002024
 
-#define DWT_CTRL       0xE0001000
-
 /* DCB_DHCSR bit and field definitions */
-#define DBGKEY         (0xA05F<<16)
-#define C_DEBUGEN      (1<<0)
-#define C_HALT         (1<<1)
-#define C_STEP         (1<<2)
-#define C_MASKINTS     (1<<3)
-#define S_REGRDY       (1<<16)
-#define S_HALT         (1<<17)
-#define S_SLEEP                (1<<18)
-#define S_LOCKUP       (1<<19)
-#define S_RETIRE_ST    (1<<24)
-#define S_RESET_ST     (1<<25)
+#define DBGKEY         (0xA05F << 16)
+#define C_DEBUGEN      (1 << 0)
+#define C_HALT         (1 << 1)
+#define C_STEP         (1 << 2)
+#define C_MASKINTS     (1 << 3)
+#define S_REGRDY       (1 << 16)
+#define S_HALT         (1 << 17)
+#define S_SLEEP                (1 << 18)
+#define S_LOCKUP       (1 << 19)
+#define S_RETIRE_ST    (1 << 24)
+#define S_RESET_ST     (1 << 25)
 
 /* DCB_DEMCR bit and field definitions */
-#define        TRCENA                  (1<<24)
-#define        VC_HARDERR              (1<<10)
-#define        VC_BUSERR               (1<<8)
-#define        VC_CORERESET    (1<<0)
+#define        TRCENA                  (1 << 24)
+#define        VC_HARDERR              (1 << 10)
+#define        VC_INTERR               (1 << 9)
+#define        VC_BUSERR               (1 << 8)
+#define        VC_STATERR              (1 << 7)
+#define        VC_CHKERR               (1 << 6)
+#define        VC_NOCPERR              (1 << 5)
+#define        VC_MMERR                (1 << 4)
+#define        VC_CORERESET    (1 << 0)
 
 #define NVIC_ICTR              0xE000E004
 #define NVIC_ISE0              0xE000E100
@@ -94,122 +98,74 @@ extern char* cortex_m3_state_strings[];
 #define NVIC_BFAR              0xE000ED38
 
 /* NVIC_AIRCR bits */
-#define AIRCR_VECTKEY          (0x5FA<<16)
-#define AIRCR_SYSRESETREQ      (1<<2)
-#define AIRCR_VECTCLRACTIVE    (1<<1)
-#define AIRCR_VECTRESET                (1<<0)
+#define AIRCR_VECTKEY          (0x5FA << 16)
+#define AIRCR_SYSRESETREQ      (1 << 2)
+#define AIRCR_VECTCLRACTIVE    (1 << 1)
+#define AIRCR_VECTRESET                (1 << 0)
 /* NVIC_SHCSR bits */
-#define SHCSR_BUSFAULTENA      (1<<17)
+#define SHCSR_BUSFAULTENA      (1 << 17)
 /* NVIC_DFSR bits */
-#define DFSR_HALTED    1
-#define DFSR_BKPT      2
-#define DFSR_DWTTRAP   4
-#define DFSR_VCATCH    8
+#define DFSR_HALTED                    1
+#define DFSR_BKPT                      2
+#define DFSR_DWTTRAP           4
+#define DFSR_VCATCH                    8
 
 #define FPCR_CODE 0
 #define FPCR_LITERAL 1
-#define FPCR_REPLACE_REMAP  (0<<30)
-#define FPCR_REPLACE_BKPT_LOW  (1<<30)
-#define FPCR_REPLACE_BKPT_HIGH  (2<<30)
-#define FPCR_REPLACE_BKPT_BOTH  (3<<30)
+#define FPCR_REPLACE_REMAP  (0 << 30)
+#define FPCR_REPLACE_BKPT_LOW  (1 << 30)
+#define FPCR_REPLACE_BKPT_HIGH  (2 << 30)
+#define FPCR_REPLACE_BKPT_BOTH  (3 << 30)
 
-typedef struct  cortex_m3_fp_comparator_s
+struct cortex_m3_fp_comparator
 {
        int used;
        int type;
-       u32 fpcr_value;
-       u32 fpcr_address;
-} cortex_m3_fp_comparator_t;
+       uint32_t fpcr_value;
+       uint32_t fpcr_address;
+};
 
-typedef struct  cortex_m3_dwt_comparator_s
+struct cortex_m3_dwt_comparator
 {
        int used;
-       u32 comp;
-       u32 mask;
-       u32 function;
-       u32 dwt_comparator_address;
-} cortex_m3_dwt_comparator_t;
+       uint32_t comp;
+       uint32_t mask;
+       uint32_t function;
+       uint32_t dwt_comparator_address;
+};
 
-typedef struct cortex_m3_common_s
+struct cortex_m3_common
 {
        int common_magic;
-//     int (*full_context)(struct target_s *target);
+       struct arm_jtag jtag_info;
 
-       arm_jtag_t jtag_info;
-       
        /* Context information */
-       u32 dcb_dhcsr;
-       u32 nvic_dfsr;  /* Debug Fault Status Register - shows reason for debug halt */
-       u32 nvic_icsr;  /* Interrupt Control State Register - shows active and pending IRQ */
-       
-       /* Flash Patch and Breakpoint */
+       uint32_t dcb_dhcsr;
+       uint32_t nvic_dfsr;  /* Debug Fault Status Register - shows reason for debug halt */
+       uint32_t nvic_icsr;  /* Interrupt Control State Register - shows active and pending IRQ */
+
+       /* Flash Patch and Breakpoint (FPB) */
        int fp_num_lit;
        int fp_num_code;
        int fp_code_available;
+       int fpb_enabled;
        int auto_bp_type;
-       cortex_m3_fp_comparator_t *fp_comparator_list;
-       
-       /* DWT */
+       struct cortex_m3_fp_comparator *fp_comparator_list;
+
+       /* Data Watchpoint and Trace (DWT) */
        int dwt_num_comp;
        int dwt_comp_available;
-       cortex_m3_dwt_comparator_t *dwt_comparator_list;
-       
-       /* Interrupts */
-       int intlinesnum;
-       u32 *intsetenable;
-       
-/*
-       u32 arm_bkpt;
-       u16 thumb_bkpt;
-       int sw_bkpts_use_wp;
-       int wp_available;
-       int wp0_used;
-       int wp1_used;
-       
-       int force_hw_bkpts;
-       int dbgreq_adjust_pc;
-       int use_dbgrq;
-       int has_etm;
-       
-       int reinit_embeddedice;
-       
-       struct working_area_s *dcc_working_area;
-       
-       int fast_memory_access;
-       int dcc_downloads;
-*/
-       /* breakpoint use map */
-       int sw_bkpts_enabled;
-
-       armv7m_common_t armv7m;
-       swjdp_common_t swjdp_info;
-       
-       void *arch_info;
-} cortex_m3_common_t;
-
-extern void cortex_m3_build_reg_cache(target_t *target);
-
-enum target_state cortex_m3_poll(target_t *target);
-int cortex_m3_halt(target_t *target);
-int cortex_m3_resume(struct target_s *target, int current, u32 address, int handle_breakpoints, int debug_execution);
-int cortex_m3_step(struct target_s *target, int current, u32 address, int handle_breakpoints);
-
-int cortex_m3_assert_reset(target_t *target);
-int cortex_m3_deassert_reset(target_t *target);
-int cortex_m3_soft_reset_halt(struct target_s *target);
-
-int cortex_m3_read_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer);
-int cortex_m3_write_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer);
-int cortex_m3_bulk_write_memory(target_t *target, u32 address, u32 count, u8 *buffer);
-
-int cortex_m3_set_breakpoint(struct target_s *target, breakpoint_t *breakpoint);
-int cortex_m3_unset_breakpoint(struct target_s *target, breakpoint_t *breakpoint);
-int cortex_m3_add_breakpoint(struct target_s *target, breakpoint_t *breakpoint);
-int cortex_m3_remove_breakpoint(struct target_s *target, breakpoint_t *breakpoint);
-int cortex_m3_add_watchpoint(struct target_s *target, watchpoint_t *watchpoint);
-int cortex_m3_remove_watchpoint(struct target_s *target, watchpoint_t *watchpoint);
-
-extern int cortex_m3_register_commands(struct command_context_s *cmd_ctx);
-extern int cortex_m3_init_arch_info(target_t *target, cortex_m3_common_t *cortex_m3, int chain_pos, char *variant);
+       struct cortex_m3_dwt_comparator *dwt_comparator_list;
+       struct reg_cache *dwt_cache;
+
+       struct armv7m_common armv7m;
+};
+
+static inline struct cortex_m3_common *
+target_to_cm3(struct target *target)
+{
+       return container_of(target->arch_info,
+                       struct cortex_m3_common, armv7m);
+}
 
 #endif /* CORTEX_M3_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)