- target_t *target; /* target this ETM is connected to */
- reg_cache_t *reg_cache; /* ETM register cache */
- etm_capture_driver_t *capture_driver; /* driver used to access ETM data */
- void *capture_driver_priv; /* capture driver private data */
- u32 trigger_percent; /* percent of trace buffer to be filled after the trigger */
- trace_status_t capture_status; /* current state of capture run */
- etmv1_trace_data_t *trace_data; /* trace data */
- u32 trace_depth; /* number of trace cycles to be analyzed, 0 if no trace data available */
- etm_portmode_t portmode; /* normal, multiplexed or demultiplexed */
- etmv1_tracemode_t tracemode; /* type of information the trace contains (data, addres, contextID, ...) */
- armv4_5_state_t core_state; /* current core state (ARM, Thumb, Jazelle) */
- image_t *image; /* source for target opcodes */
- u32 pipe_index; /* current trace cycle */
- u32 data_index; /* cycle holding next data packet */
- int data_half; /* port half on a 16 bit port */
- u32 current_pc; /* current program counter */
- u32 pc_ok; /* full PC has been acquired */
- u32 last_branch; /* last branch address output */
- u32 last_branch_reason; /* branch reason code for the last branch encountered */
- u32 last_ptr; /* address of the last data access */
- u32 ptr_ok; /* whether last_ptr is valid */
- u32 context_id; /* context ID of the code being traced */
- u32 last_instruction; /* index of last instruction executed (to calculate cycle timings) */
-} etm_context_t;
+ struct target *target; /* target this ETM is connected to */
+ struct reg_cache *reg_cache; /* ETM register cache */
+ struct etm_capture_driver *capture_driver; /* driver used to access ETM data */
+ void *capture_driver_priv; /* capture driver private data */
+ uint32_t trigger_percent; /* how much trace buffer to fill after trigger */
+ trace_status_t capture_status; /* current state of capture run */
+ struct etmv1_trace_data *trace_data; /* trace data */
+ uint32_t trace_depth; /* number of cycles to be analyzed, 0 if no data available */
+ etm_portmode_t portmode; /* normal, multiplexed or demultiplexed */
+ etmv1_tracemode_t tracemode; /* type of info trace contains */
+ int /*armv4_5_state_t*/ core_state; /* current core state */
+ struct image *image; /* source for target opcodes */
+ uint32_t pipe_index; /* current trace cycle */
+ uint32_t data_index; /* cycle holding next data packet */
+ bool data_half; /* port half on a 16 bit port */
+ bool pc_ok; /* full PC has been acquired */
+ bool ptr_ok; /* whether last_ptr is valid */
+ uint8_t bcd_vers; /* e.g. 0x13 == ETMv1.3 */
+ uint32_t config; /* cache of ETM_CONFIG value */
+ uint32_t id; /* cache of ETM_ID value, or 0 */
+ uint32_t current_pc; /* current program counter */
+ uint32_t last_branch; /* last branch address output */
+ uint32_t last_branch_reason; /* type of last branch encountered */
+ uint32_t last_ptr; /* address of the last data access */
+ uint32_t last_instruction; /* index of last executed (to calc timings) */
+};