- jtag_khz/speed are now single parameter only. These are used

[openocd.git] / src / target / event / xba_revA3.script

diff --git a/src/target/event/xba_revA3.script b/src/target/event/xba_revA3.script
index 3d0110149c758bd6e2f62b0cc221e4cdb67e2f78..e58185e244abd2e509988ff2a41d5744cb47c7d0 100644 (file)
--- a/src/target/event/xba_revA3.script
+++ b/src/target/event/xba_revA3.script
@@ -1,43 +1,43 @@
-#Written by: Michael Schwingen <rincewind@discworld.dascon.de>\r
-#############################################################################\r
-# setup expansion bus CS, disable external wdt\r
-#############################################################################\r
-mww 0xc4000000  0xbd113842  #CS0  : Flash, write enabled @0x50000000\r
-mww 0xc4000004  0x94d10013  #CS1\r
-mww 0xc4000008  0x95960003  #CS2\r
-mww 0xc400000c  0x00000000  #CS3\r
-mww 0xc4000010  0x80900003  #CS4\r
-mww 0xc4000014  0x9d520003  #CS5\r
-mww 0xc4000018  0x81860001  #CS6\r
-mww 0xc400001c  0x80900003  #CS7\r
-\r
-#############################################################################\r
-# init SDRAM controller: 16MB, one bank, CL3\r
-#############################################################################\r
-mww 0xCC000000  0x2A # SDRAM_CFG: 64MBit, CL3\r
-mww 0xCC000004     0 # disable refresh\r
-mww 0xCC000008     3 # NOP\r
-sleep 100\r
-mww 0xCC000004  2100 # set refresh counter\r
-mww 0xCC000008     2 # Precharge All Banks\r
-sleep 100\r
-mww 0xCC000008     4 # Auto Refresh\r
-mww 0xCC000008     4 # Auto Refresh\r
-mww 0xCC000008     4 # Auto Refresh\r
-mww 0xCC000008     4 # Auto Refresh\r
-mww 0xCC000008     4 # Auto Refresh\r
-mww 0xCC000008     4 # Auto Refresh\r
-mww 0xCC000008     4 # Auto Refresh\r
-mww 0xCC000008     4 # Auto Refresh\r
-mww 0xCC000008     1 # Mode Select CL3\r
-\r
-#mww 0xc4000020  0xffffee # CFG0: remove expansion bus boot flash\r
-#mirror at 0x00000000\r
-\r
-#big endian\r
-reg XSCALE_CTRL 0xF8\r
-\r
-#\r
-# detect flash\r
-#\r
-flash probe 0\r
+#Written by: Michael Schwingen <rincewind@discworld.dascon.de>
+#############################################################################
+# setup expansion bus CS, disable external wdt
+#############################################################################
+mww 0xc4000000  0xbd113842  #CS0  : Flash, write enabled @0x50000000
+mww 0xc4000004  0x94d10013  #CS1
+mww 0xc4000008  0x95960003  #CS2
+mww 0xc400000c  0x00000000  #CS3
+mww 0xc4000010  0x80900003  #CS4
+mww 0xc4000014  0x9d520003  #CS5
+mww 0xc4000018  0x81860001  #CS6
+mww 0xc400001c  0x80900003  #CS7
+
+#############################################################################
+# init SDRAM controller: 16MB, one bank, CL3
+#############################################################################
+mww 0xCC000000  0x2A # SDRAM_CFG: 64MBit, CL3
+mww 0xCC000004     0 # disable refresh
+mww 0xCC000008     3 # NOP
+sleep 100
+mww 0xCC000004  2100 # set refresh counter
+mww 0xCC000008     2 # Precharge All Banks
+sleep 100
+mww 0xCC000008     4 # Auto Refresh
+mww 0xCC000008     4 # Auto Refresh
+mww 0xCC000008     4 # Auto Refresh
+mww 0xCC000008     4 # Auto Refresh
+mww 0xCC000008     4 # Auto Refresh
+mww 0xCC000008     4 # Auto Refresh
+mww 0xCC000008     4 # Auto Refresh
+mww 0xCC000008     4 # Auto Refresh
+mww 0xCC000008     1 # Mode Select CL3
+
+#mww 0xc4000020  0xffffee # CFG0: remove expansion bus boot flash
+#mirror at 0x00000000
+
+#big endian
+reg XSCALE_CTRL 0xF8
+
+#
+# detect flash
+#
+flash probe 0