mips_ejtag.c|h: use version specific IMPs
[openocd.git] / src / target / feroceon.c
index 1a358b22044f052a0bc739234ac6b4ef24458d87..ee0bafd2466eefc77d9c6eef17537f257345e492 100644 (file)
@@ -18,7 +18,7 @@
  *   You should have received a copy of the GNU General Public License     *
  *   along with this program; if not, write to the                         *
  *   Free Software Foundation, Inc.,                                       *
- *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ *   51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.           *
  ***************************************************************************/
 
 /*
@@ -493,8 +493,11 @@ static int feroceon_bulk_write_memory(struct target *target,
 
        uint32_t dcc_size = sizeof(dcc_code);
 
+       if (address % 4 != 0)
+               return ERROR_TARGET_UNALIGNED_ACCESS;
+
        if (!arm7_9->dcc_downloads)
-               return target_write_memory(target, address, 4, count, buffer);
+               return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
 
        /* regrab previously allocated working_area, or allocate a new one */
        if (!arm7_9->dcc_working_area) {
@@ -503,15 +506,15 @@ static int feroceon_bulk_write_memory(struct target *target,
                /* make sure we have a working area */
                if (target_alloc_working_area(target, dcc_size, &arm7_9->dcc_working_area) != ERROR_OK) {
                        LOG_INFO("no working area available, falling back to memory writes");
-                       return target_write_memory(target, address, 4, count, buffer);
+                       return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
                }
 
                /* copy target instructions to target endianness */
-               for (i = 0; i < dcc_size/4; i++)
-                       target_buffer_set_u32(target, dcc_code_buf + i*4, dcc_code[i]);
+               target_buffer_set_u32_array(target, dcc_code_buf, ARRAY_SIZE(dcc_code), dcc_code);
 
-               /* write DCC code to working area */
-               retval = target_write_memory(target,
+               /* write DCC code to working area, using the non-optimized
+                * memory write to avoid ending up here again */
+               retval = arm7_9_write_memory_no_opt(target,
                                arm7_9->dcc_working_area->address, 4, dcc_size/4, dcc_code_buf);
                if (retval != ERROR_OK)
                        return retval;
@@ -605,6 +608,8 @@ static void feroceon_common_setup(struct target *target)
        arm7_9->enable_single_step = feroceon_enable_single_step;
        arm7_9->disable_single_step = feroceon_disable_single_step;
 
+       arm7_9->bulk_write_memory = feroceon_bulk_write_memory;
+
        /* MOE is not implemented */
        arm7_9->examine_debug_reason = feroceon_examine_debug_reason;
 
@@ -625,6 +630,10 @@ static int feroceon_target_create(struct target *target, Jim_Interp *interp)
        arm926ejs_init_arch_info(target, arm926ejs, target->tap);
        feroceon_common_setup(target);
 
+       struct arm *arm = target->arch_info;
+       struct arm7_9_common *arm7_9 = arm->arch_info;
+       arm7_9->write_memory = arm926ejs_write_memory;
+
        /* the standard ARM926 methods don't always work (don't ask...) */
        arm926ejs->read_cp15 = feroceon_read_cp15;
        arm926ejs->write_cp15 = feroceon_write_cp15;
@@ -639,6 +648,10 @@ static int dragonite_target_create(struct target *target, Jim_Interp *interp)
        arm966e_init_arch_info(target, arm966e, target->tap);
        feroceon_common_setup(target);
 
+       struct arm *arm = target->arch_info;
+       struct arm7_9_common *arm7_9 = arm->arch_info;
+       arm7_9->write_memory = arm7_9_write_memory;
+
        return ERROR_OK;
 }
 
@@ -695,8 +708,7 @@ struct target_type feroceon_target = {
        .get_gdb_reg_list = arm_get_gdb_reg_list,
 
        .read_memory = arm7_9_read_memory,
-       .write_memory = arm926ejs_write_memory,
-       .bulk_write_memory = feroceon_bulk_write_memory,
+       .write_memory = arm7_9_write_memory_opt,
 
        .checksum_memory = arm_checksum_memory,
        .blank_check_memory = arm_blank_check_memory,
@@ -733,8 +745,7 @@ struct target_type dragonite_target = {
        .get_gdb_reg_list = arm_get_gdb_reg_list,
 
        .read_memory = arm7_9_read_memory,
-       .write_memory = arm7_9_write_memory,
-       .bulk_write_memory = feroceon_bulk_write_memory,
+       .write_memory = arm7_9_write_memory_opt,
 
        .checksum_memory = arm_checksum_memory,
        .blank_check_memory = arm_blank_check_memory,

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)