smp: move command deprecation to startup.tcl

[openocd.git] / src / target / startup.tcl

diff --git a/src/target/startup.tcl b/src/target/startup.tcl
index 425e1ecfb0df3ec2457d3d89a8c86de36c2800e6..f128d3b5e2a470b6d1496ededc05f7bfe8c65e44 100644 (file)
--- a/src/target/startup.tcl
+++ b/src/target/startup.tcl
@@ -63,8 +63,14 @@ proc ocd_process_reset_inner { MODE } {
 
        # Examine all targets on enabled taps.
        foreach t $targets {
-               if {[jtag tapisenabled [$t cget -chain-position]]} {
-                       $t arp_examine
+               if {![using_jtag] || [jtag tapisenabled [$t cget -chain-position]]} {
+                       $t invoke-event examine-start
+                       set err [catch "$t arp_examine allow-defer"]
+                       if { $err } {
+                               $t invoke-event examine-fail
+                       } else {
+                               $t invoke-event examine-end
+                       }
                }
        }
 
@@ -75,7 +81,7 @@ proc ocd_process_reset_inner { MODE } {
        }
        foreach t $targets {
                # C code needs to know if we expect to 'halt'
-               if {[jtag tapisenabled [$t cget -chain-position]]} {
+               if {![using_jtag] || [jtag tapisenabled [$t cget -chain-position]]} {
                        $t arp_reset assert $halt
                }
        }
@@ -90,7 +96,7 @@ proc ocd_process_reset_inner { MODE } {
        }
        foreach t $targets {
                # Again, de-assert code needs to know if we 'halt'
-               if {[jtag tapisenabled [$t cget -chain-position]]} {
+               if {![using_jtag] || [jtag tapisenabled [$t cget -chain-position]]} {
                        $t arp_reset deassert $halt
                }
        }
@@ -103,11 +109,17 @@ proc ocd_process_reset_inner { MODE } {
        # first executing any instructions.
        if { $halt } {
                foreach t $targets {
-                       if {[jtag tapisenabled [$t cget -chain-position]] == 0} {
+                       if {[using_jtag] && ![jtag tapisenabled [$t cget -chain-position]]} {
                                continue
                        }
 
-                       # Wait upto 1 second for target to halt.  Why 1sec? Cause
+                       # don't wait for targets where examination is deferred
+                       # they can not be halted anyway at this point
+                       if { ![$t was_examined] && [$t examine_deferred] } {
+                               continue
+                       }
+
+                       # Wait up to 1 second for target to halt. Why 1sec? Cause
                        # the JTAG tap reset signal might be hooked to a slow
                        # resistor/capacitor circuit - and it might take a while
                        # to charge
@@ -127,7 +139,13 @@ proc ocd_process_reset_inner { MODE } {
        #Pass 2 - if needed "init"
        if { 0 == [string compare init $MODE] } {
                foreach t $targets {
-                       if {[jtag tapisenabled [$t cget -chain-position]] == 0} {
+                       if {[using_jtag] && ![jtag tapisenabled [$t cget -chain-position]]} {
+                               continue
+                       }
+
+                       # don't wait for targets where examination is deferred
+                       # they can not be halted anyway at this point
+                       if { ![$t was_examined] && [$t examine_deferred] } {
                                continue
                        }
 
@@ -144,18 +162,78 @@ proc ocd_process_reset_inner { MODE } {
        }
 }
 
-#########
+proc using_jtag {} {
+       set _TRANSPORT [ transport select ]
+       expr { [ string first "jtag" $_TRANSPORT ] != -1 }
+}
 
-# Temporary migration aid.  May be removed starting in January 2011.
-proc armv4_5 params {
-       echo "DEPRECATED! use 'arm $params' not 'armv4_5 $params'"
-       arm $params
+proc using_swd {} {
+       set _TRANSPORT [ transport select ]
+       expr { [ string first "swd" $_TRANSPORT ] != -1 }
 }
 
-# Target/chain configuration scripts can either execute commands directly 
-# or define a procedure which is executed once all configuration 
+proc using_hla {} {
+       set _TRANSPORT [ transport select ]
+       expr { [ string first "hla" $_TRANSPORT ] != -1 }
+}
+
+#########
+
+# Target/chain configuration scripts can either execute commands directly
+# or define a procedure which is executed once all configuration
 # scripts have completed.
 #
 # By default(classic) the config scripts will set up the target configuration
 proc init_targets {} {
 }
+
+proc set_default_target_event {t e s} {
+       if {[$t cget -event $e] == ""} {
+               $t configure -event $e $s
+       }
+}
+
+proc init_target_events {} {
+       set targets [target names]
+
+       foreach t $targets {
+               set_default_target_event $t gdb-flash-erase-start "reset init"
+               set_default_target_event $t gdb-flash-write-end "reset halt"
+               set_default_target_event $t gdb-attach "halt 1000"
+       }
+}
+
+# Additionally board config scripts can define a procedure init_board that will be executed after init and init_targets
+proc init_board {} {
+}
+
+# smp_on/smp_off were already DEPRECATED in v0.11.0 through http://openocd.zylin.com/4615
+proc "aarch64 smp_on" {args} {
+       echo "DEPRECATED! use 'aarch64 smp on' not 'aarch64 smp_on'"
+       eval aarch64 smp on $args
+}
+
+proc "aarch64 smp_off" {args} {
+       echo "DEPRECATED! use 'aarch64 smp off' not 'aarch64 smp_off'"
+       eval aarch64 smp off $args
+}
+
+proc "cortex_a smp_on" {args} {
+       echo "DEPRECATED! use 'cortex_a smp on' not 'cortex_a smp_on'"
+       eval cortex_a smp on $args
+}
+
+proc "cortex_a smp_off" {args} {
+       echo "DEPRECATED! use 'cortex_a smp off' not 'cortex_a smp_off'"
+       eval cortex_a smp off $args
+}
+
+proc "mips_m4k smp_on" {args} {
+       echo "DEPRECATED! use 'mips_m4k smp on' not 'mips_m4k smp_on'"
+       eval mips_m4k smp on $args
+}
+
+proc "mips_m4k smp_off" {args} {
+       echo "DEPRECATED! use 'mips_m4k smp off' not 'mips_m4k smp_off'"
+       eval mips_m4k smp off $args
+}