adi_v5: enforce check on AP number value
[openocd.git] / src / target / target.h
index 41c9333ec72f3f57a7534e0f317e5c82f7f76489..51a5b6935792e99d7d82c3cdf9df35feed4ed07a 100644 (file)
@@ -125,7 +125,7 @@ enum target_register_class {
 /* target_type.h contains the full definition of struct target_type */
 struct target {
        struct target_type *type;                       /* target type definition (name, access functions) */
-       const char *cmd_name;                           /* tcl Name of target */
+       char *cmd_name;                         /* tcl Name of target */
        int target_number;                                      /* DO NOT USE!  field to be removed in 2010 */
        struct jtag_tap *tap;                           /* where on the jtag chain is this */
        int32_t coreid;                                         /* which device on the TAP? */
@@ -153,7 +153,7 @@ struct target {
        struct target_event_action *event_action;
 
        int reset_halt;                                         /* attempt resetting the CPU into the halted mode? */
-       uint32_t working_area;                          /* working area (initialised RAM). Evaluated
+       target_addr_t working_area;                             /* working area (initialised RAM). Evaluated
                                                                                 * upon first allocation from virtual/physical address. */
        bool working_area_virt_spec;            /* virtual address specified? */
        target_addr_t working_area_virt;                        /* virtual address */
@@ -176,15 +176,21 @@ struct target {
        void *private_config;                           /* pointer to target specific config data (for jim_configure hook) */
        struct target *next;                            /* next target in list */
 
-       int display;                                            /* display async info in telnet session. Do not display
+       bool verbose_halt_msg;                          /* display async info in telnet session. Do not display
                                                                                 * lots of halted/resumed info when stepping in debugger. */
        bool halt_issued;                                       /* did we transition to halted state? */
        int64_t halt_issued_time;                       /* Note time when halt was issued */
 
+                                                                               /* ARM v7/v8 targets with ADIv5 interface */
        bool dbgbase_set;                                       /* By default the debug base is not set */
        uint32_t dbgbase;                                       /* Really a Cortex-A specific option, but there is no
                                                                                 * system in place to support target specific options
                                                                                 * currently. */
+       bool has_dap;                                           /* set to true if target has ADIv5 support */
+       bool dap_configured;                            /* set to true if ADIv5 DAP is configured */
+       bool tap_configured;                            /* set to true if JTAG tap has been configured
+                                                                                * through -chain-position */
+
        struct rtos *rtos;                                      /* Instance of Real Time Operating System support */
        bool rtos_auto_detect;                          /* A flag that indicates that the RTOS has been specified as "auto"
                                                                                 * and must be detected when symbols are offered */
@@ -199,6 +205,9 @@ struct target {
 
        /* file-I/O information for host to do syscall */
        struct gdb_fileio_info *fileio_info;
+
+       /* The semihosting information, extracted from the target. */
+       struct semihosting *semihosting;
 };
 
 struct target_list {
@@ -208,10 +217,10 @@ struct target_list {
 
 struct gdb_fileio_info {
        char *identifier;
-       uint32_t param_1;
-       uint32_t param_2;
-       uint32_t param_3;
-       uint32_t param_4;
+       uint64_t param_1;
+       uint64_t param_2;
+       uint64_t param_3;
+       uint64_t param_4;
 };
 
 /** Returns the instance-specific name of the specified target. */
@@ -248,10 +257,6 @@ enum target_event {
        TARGET_EVENT_RESET_ASSERT_POST,
        TARGET_EVENT_RESET_DEASSERT_PRE,
        TARGET_EVENT_RESET_DEASSERT_POST,
-       TARGET_EVENT_RESET_HALT_PRE,
-       TARGET_EVENT_RESET_HALT_POST,
-       TARGET_EVENT_RESET_WAIT_PRE,
-       TARGET_EVENT_RESET_WAIT_POST,
        TARGET_EVENT_RESET_INIT,
        TARGET_EVENT_RESET_END,
 
@@ -310,6 +315,12 @@ struct target_timer_callback {
        struct target_timer_callback *next;
 };
 
+struct target_memory_check_block {
+       target_addr_t address;
+       uint32_t size;
+       uint32_t result;
+};
+
 int target_register_commands(struct command_context *cmd_ctx);
 int target_examine(void);
 
@@ -583,7 +594,8 @@ int target_read_buffer(struct target *target,
 int target_checksum_memory(struct target *target,
                target_addr_t address, uint32_t size, uint32_t *crc);
 int target_blank_check_memory(struct target *target,
-               target_addr_t address, uint32_t size, uint32_t *blank, uint8_t erased_value);
+               struct target_memory_check_block *blocks, int num_blocks,
+               uint8_t erased_value);
 int target_wait_state(struct target *target, enum target_state state, int ms);
 
 /**

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)