target: fix display halt message logic
[openocd.git] / src / target / target.h
index fd7de560e3e375c113b7144a8b0852a838b63ab4..7a8a80f30438eaff7cffd81d68b16e3c384fe15c 100644 (file)
@@ -8,6 +8,12 @@
  *   Copyright (C) 2008 by Spencer Oliver                                  *
  *   spen@spen-soft.co.uk                                                  *
  *                                                                         *
+ *   Copyright (C) 2011 by Broadcom Corporation                            *
+ *   Evan Hunter - ehunter@broadcom.com                                    *
+ *                                                                         *
+ *   Copyright (C) ST-Ericsson SA 2011                                     *
+ *   michel.jaouen@stericsson.com : smp minimum support                    *
+ *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License as published by  *
  *   the Free Software Foundation; either version 2 of the License, or     *
  *   GNU General Public License for more details.                          *
  *                                                                         *
  *   You should have received a copy of the GNU General Public License     *
- *   along with this program; if not, write to the                         *
- *   Free Software Foundation, Inc.,                                       *
- *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
  ***************************************************************************/
-#ifndef TARGET_H
-#define TARGET_H
 
-#include <helper/types.h>
+#ifndef OPENOCD_TARGET_TARGET_H
+#define OPENOCD_TARGET_TARGET_H
+
+#include <helper/list.h>
 
 struct reg;
 struct trace;
@@ -35,7 +40,8 @@ struct breakpoint;
 struct watchpoint;
 struct mem_param;
 struct reg_param;
-
+struct target_list;
+struct gdb_fileio_info;
 
 /*
  * TARGET_UNKNOWN = 0: we don't know anything about the target yet
@@ -50,9 +56,7 @@ struct reg_param;
  * also see: target_state_name();
  */
 
-
-enum target_state
-{
+enum target_state {
        TARGET_UNKNOWN = 0,
        TARGET_RUNNING = 1,
        TARGET_HALTED = 2,
@@ -65,34 +69,31 @@ enum nvp_assert {
        NVP_ASSERT,
 };
 
-enum target_reset_mode
-{
+enum target_reset_mode {
        RESET_UNKNOWN = 0,
        RESET_RUN = 1,          /* reset and let target run */
        RESET_HALT = 2,         /* reset and halt target out of reset */
        RESET_INIT = 3,         /* reset and halt target out of reset, then run init script */
 };
 
-enum target_debug_reason
-{
+enum target_debug_reason {
        DBG_REASON_DBGRQ = 0,
        DBG_REASON_BREAKPOINT = 1,
        DBG_REASON_WATCHPOINT = 2,
        DBG_REASON_WPTANDBKPT = 3,
        DBG_REASON_SINGLESTEP = 4,
        DBG_REASON_NOTHALTED = 5,
-       DBG_REASON_UNDEFINED = 6
+       DBG_REASON_EXIT = 6,
+       DBG_REASON_UNDEFINED = 7,
 };
 
-enum target_endianness
-{
+enum target_endianness {
        TARGET_ENDIAN_UNKNOWN = 0,
        TARGET_BIG_ENDIAN = 1, TARGET_LITTLE_ENDIAN = 2
 };
 
-struct working_area
-{
-       uint32_t address;
+struct working_area {
+       target_addr_t address;
        uint32_t size;
        bool free;
        uint8_t *backup;
@@ -100,15 +101,37 @@ struct working_area
        struct working_area *next;
 };
 
-// target_type.h contains the full definitionof struct targe_type
-struct target
-{
-       struct target_type *type;                               /* target type definition (name, access functions) */
-       const char *cmd_name;                           /* tcl Name of target */
+struct gdb_service {
+       struct target *target;
+       /*  field for smp display  */
+       /*  element 0 coreid currently displayed ( 1 till n) */
+       /*  element 1 coreid to be displayed at next resume 1 till n 0 means resume
+        *  all cores core displayed  */
+       int32_t core[2];
+};
+
+/* target back off timer */
+struct backoff_timer {
+       int times;
+       int count;
+};
+
+/* split target registers into multiple class */
+enum target_register_class {
+       REG_CLASS_ALL,
+       REG_CLASS_GENERAL,
+};
+
+/* target_type.h contains the full definition of struct target_type */
+struct target {
+       struct target_type *type;                       /* target type definition (name, access functions) */
+       char *cmd_name;                         /* tcl Name of target */
        int target_number;                                      /* DO NOT USE!  field to be removed in 2010 */
-       struct jtag_tap *tap;                                   /* where on the jtag chain is this */
-       int coreid;                                                     /* which device on the TAP? */
-       const char *variant;                            /* what variant of this chip is it? */
+       struct jtag_tap *tap;                           /* where on the jtag chain is this */
+       int32_t coreid;                                         /* which device on the TAP? */
+
+       /** Should we defer examine to later */
+       bool defer_examine;
 
        /**
         * Indicates whether this target has been examined.
@@ -118,48 +141,83 @@ struct target
         */
        bool examined;
 
-       /** true iff the  target is currently running a downloaded
-        *  "algorithm" instetad of arbitrary user code.  OpenOCD code
-        *  invoking algorithms is trusted to maintain correctness of
-        *  any cached state (e.g. for flash status), which arbitrary
-        *  code will have no reason to know about.
+       /**
+        * true if the  target is currently running a downloaded
+        * "algorithm" instead of arbitrary user code. OpenOCD code
+        * invoking algorithms is trusted to maintain correctness of
+        * any cached state (e.g. for flash status), which arbitrary
+        * code will have no reason to know about.
         */
        bool running_alg;
 
        struct target_event_action *event_action;
 
        int reset_halt;                                         /* attempt resetting the CPU into the halted mode? */
-       uint32_t working_area;                                  /* working area (initialized RAM). Evaluated
+       target_addr_t working_area;                             /* working area (initialised RAM). Evaluated
                                                                                 * upon first allocation from virtual/physical address. */
        bool working_area_virt_spec;            /* virtual address specified? */
-       uint32_t working_area_virt;                     /* virtual address */
-       bool working_area_phys_spec;            /* virtual address specified? */
-       uint32_t working_area_phys;                     /* physical address */
+       target_addr_t working_area_virt;                        /* virtual address */
+       bool working_area_phys_spec;            /* physical address specified? */
+       target_addr_t working_area_phys;                        /* physical address */
        uint32_t working_area_size;                     /* size in bytes */
-       uint32_t backup_working_area;                   /* whether the content of the working area has to be preserved */
+       uint32_t backup_working_area;           /* whether the content of the working area has to be preserved */
        struct working_area *working_areas;/* list of allocated working areas */
        enum target_debug_reason debug_reason;/* reason why the target entered debug state */
        enum target_endianness endianness;      /* target endianness */
-       // also see: target_state_name()
+       /* also see: target_state_name() */
        enum target_state state;                        /* the current backend-state (running, halted, ...) */
        struct reg_cache *reg_cache;            /* the first register cache of the target (core regs) */
-       struct breakpoint *breakpoints; /* list of breakpoints */
-       struct watchpoint *watchpoints; /* list of watchpoints */
+       struct breakpoint *breakpoints;         /* list of breakpoints */
+       struct watchpoint *watchpoints;         /* list of watchpoints */
        struct trace *trace_info;                       /* generic trace information */
-       struct debug_msg_receiver *dbgmsg;/* list of debug message receivers */
-       uint32_t dbg_msg_enabled;                               /* debug message status */
+       struct debug_msg_receiver *dbgmsg;      /* list of debug message receivers */
+       uint32_t dbg_msg_enabled;                       /* debug message status */
        void *arch_info;                                        /* architecture specific information */
+       void *private_config;                           /* pointer to target specific config data (for jim_configure hook) */
        struct target *next;                            /* next target in list */
 
-       int display;                                            /* display async info in telnet session. Do not display
+       bool verbose_halt_msg;                          /* display async info in telnet session. Do not display
                                                                                 * lots of halted/resumed info when stepping in debugger. */
        bool halt_issued;                                       /* did we transition to halted state? */
-       long long halt_issued_time;                     /* Note time when halt was issued */
+       int64_t halt_issued_time;                       /* Note time when halt was issued */
 
+                                                                               /* ARM v7/v8 targets with ADIv5 interface */
        bool dbgbase_set;                                       /* By default the debug base is not set */
        uint32_t dbgbase;                                       /* Really a Cortex-A specific option, but there is no
-                                                                                  system in place to support target specific options
-                                                                                  currently. */
+                                                                                * system in place to support target specific options
+                                                                                * currently. */
+       bool has_dap;                                           /* set to true if target has ADIv5 support */
+       bool dap_configured;                            /* set to true if ADIv5 DAP is configured */
+       bool tap_configured;                            /* set to true if JTAG tap has been configured
+                                                                                * through -chain-position */
+
+       struct rtos *rtos;                                      /* Instance of Real Time Operating System support */
+       bool rtos_auto_detect;                          /* A flag that indicates that the RTOS has been specified as "auto"
+                                                                                * and must be detected when symbols are offered */
+       struct backoff_timer backoff;
+       int smp;                                                        /* add some target attributes for smp support */
+       struct target_list *head;
+       /* the gdb service is there in case of smp, we have only one gdb server
+        * for all smp target
+        * the target attached to the gdb is changing dynamically by changing
+        * gdb_service->target pointer */
+       struct gdb_service *gdb_service;
+
+       /* file-I/O information for host to do syscall */
+       struct gdb_fileio_info *fileio_info;
+};
+
+struct target_list {
+       struct target *target;
+       struct target_list *next;
+};
+
+struct gdb_fileio_info {
+       char *identifier;
+       uint32_t param_1;
+       uint32_t param_2;
+       uint32_t param_3;
+       uint32_t param_4;
 };
 
 /** Returns the instance-specific name of the specified target. */
@@ -170,14 +228,7 @@ static inline const char *target_name(struct target *target)
 
 const char *debug_reason_name(struct target *t);
 
-enum target_event
-{
-       /* LD historical names
-        * - Prior to the great TCL change
-        * - June/July/Aug 2008
-        * - Duane Ellis */
-       TARGET_EVENT_OLD_gdb_program_config,
-       TARGET_EVENT_OLD_pre_resume,
+enum target_event {
 
        /* allow GDB to do stuff before others handle the halted event,
         * this is in lieu of defining ordering of invocation of events,
@@ -203,10 +254,6 @@ enum target_event
        TARGET_EVENT_RESET_ASSERT_POST,
        TARGET_EVENT_RESET_DEASSERT_PRE,
        TARGET_EVENT_RESET_DEASSERT_POST,
-       TARGET_EVENT_RESET_HALT_PRE,
-       TARGET_EVENT_RESET_HALT_POST,
-       TARGET_EVENT_RESET_WAIT_PRE,
-       TARGET_EVENT_RESET_WAIT_POST,
        TARGET_EVENT_RESET_INIT,
        TARGET_EVENT_RESET_END,
 
@@ -223,6 +270,8 @@ enum target_event
        TARGET_EVENT_GDB_FLASH_ERASE_END,
        TARGET_EVENT_GDB_FLASH_WRITE_START,
        TARGET_EVENT_GDB_FLASH_WRITE_END,
+
+       TARGET_EVENT_TRACE_CONFIG,
 };
 
 struct target_event_action {
@@ -235,18 +284,29 @@ struct target_event_action {
 
 bool target_has_event_action(struct target *target, enum target_event event);
 
-struct target_event_callback
-{
+struct target_event_callback {
        int (*callback)(struct target *target, enum target_event event, void *priv);
        void *priv;
        struct target_event_callback *next;
 };
 
-struct target_timer_callback
-{
+struct target_reset_callback {
+       struct list_head list;
+       void *priv;
+       int (*callback)(struct target *target, enum target_reset_mode reset_mode, void *priv);
+};
+
+struct target_trace_callback {
+       struct list_head list;
+       void *priv;
+       int (*callback)(struct target *target, size_t len, uint8_t *data, void *priv);
+};
+
+struct target_timer_callback {
        int (*callback)(void *priv);
        int time_ms;
        int periodic;
+       bool removed;
        struct timeval when;
        void *priv;
        struct target_timer_callback *next;
@@ -257,12 +317,31 @@ int target_examine(void);
 
 int target_register_event_callback(
                int (*callback)(struct target *target,
-                               enum target_event event, void *priv),
+               enum target_event event, void *priv),
                void *priv);
 int target_unregister_event_callback(
                int (*callback)(struct target *target,
-                               enum target_event event, void *priv),
+               enum target_event event, void *priv),
+               void *priv);
+
+int target_register_reset_callback(
+               int (*callback)(struct target *target,
+               enum target_reset_mode reset_mode, void *priv),
                void *priv);
+int target_unregister_reset_callback(
+               int (*callback)(struct target *target,
+               enum target_reset_mode reset_mode, void *priv),
+               void *priv);
+
+int target_register_trace_callback(
+               int (*callback)(struct target *target,
+               size_t len, uint8_t *data, void *priv),
+               void *priv);
+int target_unregister_trace_callback(
+               int (*callback)(struct target *target,
+               size_t len, uint8_t *data, void *priv),
+               void *priv);
+
 /* Poll the status of the target, detect any error conditions and report them.
  *
  * Also note that this fn will clear such error conditions, so a subsequent
@@ -273,13 +352,15 @@ int target_unregister_event_callback(
  * fails, then a note is made of it, the error is sticky, but the memory
  * write loop still runs to completion. This improves performance in the
  * normal case as there is no need to verify that every single write succeed,
- * yet it is possible to detect error condtions.
+ * yet it is possible to detect error conditions.
  */
 int target_poll(struct target *target);
-int target_resume(struct target *target, int current, uint32_t address,
+int target_resume(struct target *target, int current, target_addr_t address,
                int handle_breakpoints, int debug_execution);
 int target_halt(struct target *target);
 int target_call_event_callbacks(struct target *target, enum target_event event);
+int target_call_reset_callbacks(struct target *target, enum target_reset_mode reset_mode);
+int target_call_trace_callbacks(struct target *target, size_t len, uint8_t *data);
 
 /**
  * The period is very approximate, the callback can happen much more often
@@ -287,15 +368,16 @@ int target_call_event_callbacks(struct target *target, enum target_event event);
  */
 int target_register_timer_callback(int (*callback)(void *priv),
                int time_ms, int periodic, void *priv);
-
+int target_unregister_timer_callback(int (*callback)(void *priv), void *priv);
 int target_call_timer_callbacks(void);
 /**
  * Invoke this to ensure that e.g. polling timer callbacks happen before
- * a syncrhonous command completes.
+ * a synchronous command completes.
  */
 int target_call_timer_callbacks_now(void);
 
-struct target* get_current_target(struct command_context *cmd_ctx);
+struct target *get_target_by_num(int num);
+struct target *get_current_target(struct command_context *cmd_ctx);
 struct target *get_target(const char *id);
 
 /**
@@ -308,20 +390,20 @@ const char *target_type_name(struct target *target);
 
 /**
  * Examine the specified @a target, letting it perform any
- * initialization that requires JTAG access.
+ * Initialisation that requires JTAG access.
  *
  * This routine is a wrapper for target->type->examine.
  */
 int target_examine_one(struct target *target);
 
-/// @returns @c true if target_set_examined() has been called.
+/** @returns @c true if target_set_examined() has been called. */
 static inline bool target_was_examined(struct target *target)
 {
        return target->examined;
 }
 
-/// Sets the @c examined flag for the given target.
-/// Use in target->type->examine() after one-time setup is done.
+/** Sets the @c examined flag for the given target. */
+/** Use in target->type->examine() after one-time setup is done. */
 static inline void target_set_examined(struct target *target)
 {
        target->examined = true;
@@ -334,11 +416,26 @@ static inline void target_set_examined(struct target *target)
  */
 int target_add_breakpoint(struct target *target,
                struct breakpoint *breakpoint);
+/**
+ * Add the @a ContextID breakpoint  for @a target.
+ *
+ * This routine is a wrapper for target->type->add_context_breakpoint.
+ */
+int target_add_context_breakpoint(struct target *target,
+               struct breakpoint *breakpoint);
+/**
+ * Add the @a ContextID & IVA breakpoint  for @a target.
+ *
+ * This routine is a wrapper for target->type->add_hybrid_breakpoint.
+ */
+int target_add_hybrid_breakpoint(struct target *target,
+               struct breakpoint *breakpoint);
 /**
  * Remove the @a breakpoint for @a target.
  *
  * This routine is a wrapper for target->type->remove_breakpoint.
  */
+
 int target_remove_breakpoint(struct target *target,
                struct breakpoint *breakpoint);
 /**
@@ -356,13 +453,22 @@ int target_add_watchpoint(struct target *target,
 int target_remove_watchpoint(struct target *target,
                struct watchpoint *watchpoint);
 
+/**
+ * Find out the just hit @a watchpoint for @a target.
+ *
+ * This routine is a wrapper for target->type->hit_watchpoint.
+ */
+int target_hit_watchpoint(struct target *target,
+               struct watchpoint **watchpoint);
+
 /**
  * Obtain the registers for GDB.
  *
  * This routine is a wrapper for target->type->get_gdb_reg_list.
  */
 int target_get_gdb_reg_list(struct target *target,
-               struct reg **reg_list[], int *reg_list_size);
+               struct reg **reg_list[], int *reg_list_size,
+               enum target_register_class reg_class);
 
 /**
  * Step the target.
@@ -370,7 +476,7 @@ int target_get_gdb_reg_list(struct target *target,
  * This routine is a wrapper for target->type->step.
  */
 int target_step(struct target *target,
-               int current, uint32_t address, int handle_breakpoints);
+               int current, target_addr_t address, int handle_breakpoints);
 /**
  * Run an algorithm on the @a target given.
  *
@@ -382,6 +488,40 @@ int target_run_algorithm(struct target *target,
                uint32_t entry_point, uint32_t exit_point,
                int timeout_ms, void *arch_info);
 
+/**
+ * Starts an algorithm in the background on the @a target given.
+ *
+ * This routine is a wrapper for target->type->start_algorithm.
+ */
+int target_start_algorithm(struct target *target,
+               int num_mem_params, struct mem_param *mem_params,
+               int num_reg_params, struct reg_param *reg_params,
+               uint32_t entry_point, uint32_t exit_point,
+               void *arch_info);
+
+/**
+ * Wait for an algorithm on the @a target given.
+ *
+ * This routine is a wrapper for target->type->wait_algorithm.
+ */
+int target_wait_algorithm(struct target *target,
+               int num_mem_params, struct mem_param *mem_params,
+               int num_reg_params, struct reg_param *reg_params,
+               uint32_t exit_point, int timeout_ms,
+               void *arch_info);
+
+/**
+ * This routine is a wrapper for asynchronous algorithms.
+ *
+ */
+int target_run_flash_async_algorithm(struct target *target,
+               const uint8_t *buffer, uint32_t count, int block_size,
+               int num_mem_params, struct mem_param *mem_params,
+               int num_reg_params, struct reg_param *reg_params,
+               uint32_t buffer_start, uint32_t buffer_size,
+               uint32_t entry_point, uint32_t exit_point,
+               void *arch_info);
+
 /**
  * Read @a count items of @a size bytes from the memory of @a target at
  * the @a address given.
@@ -389,7 +529,9 @@ int target_run_algorithm(struct target *target,
  * This routine is a wrapper for target->type->read_memory.
  */
 int target_read_memory(struct target *target,
-               uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer);
+               target_addr_t address, uint32_t size, uint32_t count, uint8_t *buffer);
+int target_read_phys_memory(struct target *target,
+               target_addr_t address, uint32_t size, uint32_t count, uint8_t *buffer);
 /**
  * Write @a count items of @a size bytes to the memory of @a target at
  * the @a address given. @a address must be aligned to @a size
@@ -408,17 +550,9 @@ int target_read_memory(struct target *target,
  * This routine is wrapper for target->type->write_memory.
  */
 int target_write_memory(struct target *target,
-               uint32_t address, uint32_t size, uint32_t count, const uint8_t *buffer);
-
-/**
- * Write @a count items of 4 bytes to the memory of @a target at
- * the @a address given.  Because it operates only on whole words,
- * this should be faster than target_write_memory().
- *
- * This routine is wrapper for target->type->bulk_write_memory.
- */
-int target_bulk_write_memory(struct target *target,
-               uint32_t address, uint32_t count, const uint8_t *buffer);
+               target_addr_t address, uint32_t size, uint32_t count, const uint8_t *buffer);
+int target_write_phys_memory(struct target *target,
+               target_addr_t address, uint32_t size, uint32_t count, const uint8_t *buffer);
 
 /*
  * Write to target memory using the virtual address.
@@ -445,17 +579,39 @@ int target_bulk_write_memory(struct target *target,
  * peripheral registers which do not support byte operations.
  */
 int target_write_buffer(struct target *target,
-               uint32_t address, uint32_t size, const uint8_t *buffer);
+               target_addr_t address, uint32_t size, const uint8_t *buffer);
 int target_read_buffer(struct target *target,
-               uint32_t address, uint32_t size, uint8_t *buffer);
+               target_addr_t address, uint32_t size, uint8_t *buffer);
 int target_checksum_memory(struct target *target,
-               uint32_t address, uint32_t size, uint32_t* crc);
+               target_addr_t address, uint32_t size, uint32_t *crc);
 int target_blank_check_memory(struct target *target,
-               uint32_t address, uint32_t size, uint32_t* blank);
+               target_addr_t address, uint32_t size, uint32_t *blank, uint8_t erased_value);
 int target_wait_state(struct target *target, enum target_state state, int ms);
 
+/**
+ * Obtain file-I/O information from target for GDB to do syscall.
+ *
+ * This routine is a wrapper for target->type->get_gdb_fileio_info.
+ */
+int target_get_gdb_fileio_info(struct target *target, struct gdb_fileio_info *fileio_info);
+
+/**
+ * Pass GDB file-I/O response to target after finishing host syscall.
+ *
+ * This routine is a wrapper for target->type->gdb_fileio_end.
+ */
+int target_gdb_fileio_end(struct target *target, int retcode, int fileio_errno, bool ctrl_c);
+
+
+
 /** Return the *name* of this targets current state */
-const char *target_state_name( struct target *target );
+const char *target_state_name(struct target *target);
+
+/** Return the *name* of a target event enumeration value */
+const char *target_event_name(enum target_event event);
+
+/** Return the *name* of a target reset reason enumeration value */
+const char *target_reset_mode_name(enum target_reset_mode reset_mode);
 
 /* DANGER!!!!!
  *
@@ -474,28 +630,50 @@ int target_alloc_working_area(struct target *target,
  * when ERROR_TARGET_RESOURCE_NOT_AVAILABLE is returned.
  *
  * This allows the calling code to *try* to allocate target memory
- * and have a fallback to another behavior(slower?).
+ * and have a fallback to another behaviour(slower?).
  */
 int target_alloc_working_area_try(struct target *target,
                uint32_t size, struct working_area **area);
 int target_free_working_area(struct target *target, struct working_area *area);
 void target_free_all_working_areas(struct target *target);
+uint32_t target_get_working_area_avail(struct target *target);
+
+/**
+ * Free all the resources allocated by targets and the target layer
+ */
+void target_quit(void);
 
 extern struct target *all_targets;
 
+uint64_t target_buffer_get_u64(struct target *target, const uint8_t *buffer);
 uint32_t target_buffer_get_u32(struct target *target, const uint8_t *buffer);
 uint32_t target_buffer_get_u24(struct target *target, const uint8_t *buffer);
 uint16_t target_buffer_get_u16(struct target *target, const uint8_t *buffer);
+void target_buffer_set_u64(struct target *target, uint8_t *buffer, uint64_t value);
 void target_buffer_set_u32(struct target *target, uint8_t *buffer, uint32_t value);
 void target_buffer_set_u24(struct target *target, uint8_t *buffer, uint32_t value);
 void target_buffer_set_u16(struct target *target, uint8_t *buffer, uint16_t value);
 
-int target_read_u32(struct target *target, uint32_t address, uint32_t *value);
-int target_read_u16(struct target *target, uint32_t address, uint16_t *value);
-int target_read_u8(struct target *target, uint32_t address, uint8_t *value);
-int target_write_u32(struct target *target, uint32_t address, uint32_t value);
-int target_write_u16(struct target *target, uint32_t address, uint16_t value);
-int target_write_u8(struct target *target, uint32_t address, uint8_t value);
+void target_buffer_get_u64_array(struct target *target, const uint8_t *buffer, uint32_t count, uint64_t *dstbuf);
+void target_buffer_get_u32_array(struct target *target, const uint8_t *buffer, uint32_t count, uint32_t *dstbuf);
+void target_buffer_get_u16_array(struct target *target, const uint8_t *buffer, uint32_t count, uint16_t *dstbuf);
+void target_buffer_set_u64_array(struct target *target, uint8_t *buffer, uint32_t count, const uint64_t *srcbuf);
+void target_buffer_set_u32_array(struct target *target, uint8_t *buffer, uint32_t count, const uint32_t *srcbuf);
+void target_buffer_set_u16_array(struct target *target, uint8_t *buffer, uint32_t count, const uint16_t *srcbuf);
+
+int target_read_u64(struct target *target, target_addr_t address, uint64_t *value);
+int target_read_u32(struct target *target, target_addr_t address, uint32_t *value);
+int target_read_u16(struct target *target, target_addr_t address, uint16_t *value);
+int target_read_u8(struct target *target, target_addr_t address, uint8_t *value);
+int target_write_u64(struct target *target, target_addr_t address, uint64_t value);
+int target_write_u32(struct target *target, target_addr_t address, uint32_t value);
+int target_write_u16(struct target *target, target_addr_t address, uint16_t value);
+int target_write_u8(struct target *target, target_addr_t address, uint8_t value);
+
+int target_write_phys_u64(struct target *target, target_addr_t address, uint64_t value);
+int target_write_phys_u32(struct target *target, target_addr_t address, uint32_t value);
+int target_write_phys_u16(struct target *target, target_addr_t address, uint16_t value);
+int target_write_phys_u8(struct target *target, target_addr_t address, uint8_t value);
 
 /* Issues USER() statements with target state information */
 int target_arch_state(struct target *target);
@@ -516,4 +694,4 @@ void target_handle_event(struct target *t, enum target_event e);
 
 extern bool get_target_reset_nag(void);
 
-#endif /* TARGET_H */
+#endif /* OPENOCD_TARGET_TARGET_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)