"marcel" <M.W.Wijlaars@tue.nl>,

[openocd.git] / src / target / target / aduc702x.cfg

diff --git a/src/target/target/aduc702x.cfg b/src/target/target/aduc702x.cfg
index 3bc474f223b3b53564b29356ef6953d95ddeda3d..e3e886202b75f7f3b99cf54fdaa4ccb76b545831 100644 (file)
--- a/src/target/target/aduc702x.cfg
+++ b/src/target/target/aduc702x.cfg
@@ -1,6 +1,9 @@
 ## -*- tcl -*-
 ##
 
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
 # This is for the case that TRST/SRST is not wired on your JTAG adaptor.
 # Don't really need them anyways.  
 reset_config none
@@ -21,7 +24,7 @@ target arm7tdmi little 0
 #working_area 0 0x11C00 0x400 backup
 
 ## flash configuration
-## AdUC702x not yet spported  :(
+flash bank x7026 0x80000 0x10000 2 2 0
 
 ## If you use the watchdog, the following code makes sure that the board
 ## doesn't reboot when halted via JTAG.  Yes, on the older generation
@@ -34,5 +37,5 @@ proc watchdog_service {} {
     set watchdog_hdl [after 500 watchdog_service]
 }
 
-[new_target_name] configure -event old-post_halt {  watchdog_service }
+[new_target_name] configure -event reset-halt-post {  watchdog_service }
 [new_target_name] configure -event old-pre_resume { global watchdog_hdl; after cancel $watchdog_hdl }