.cfg files are now executed as Jim Tcl. Commands that terminate script w/error message.

[openocd.git] / src / target / target / at91eb40a.cfg

diff --git a/src/target/target/at91eb40a.cfg b/src/target/target/at91eb40a.cfg
index 4fee88d8f1e764d23b7d3acce7d785134ddb2048..2ca15d9115fe38805350b5ffc24a5cf0b85838e8 100644 (file)
--- a/src/target/target/at91eb40a.cfg
+++ b/src/target/target/at91eb40a.cfg
@@ -20,9 +20,6 @@ target arm7tdmi little 0 arm7tdmi-s_r4
 arm7 fast_memory_access enable
 arm7_9 dcc_downloads enable
 
-# OpenOCD does not have a flash driver for for AT91FR40162S 
-target_script 0 reset event/at91eb40a_reset.script
-
 #flash driver
 flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
 
@@ -34,3 +31,25 @@ working_area 0 0x00000000 0x20000 nobackup
 #often than not. The user can disable this in his
 #subsequent config script.
 arm7_9 force_hw_bkpts enable
+
+set reset_count 0
+
+proc target_reset_0 {} {
+       global reset_count
+       # Reset script for AT91EB40a
+       reg cpsr 0x000000D3
+       mww 0xFFE00020 0x1
+       mww 0xFFE00024 0x00000000  
+       mww 0xFFE00000 0x01002539 
+       mww 0xFFFFF124 0xFFFFFFFF  
+       mww 0xffff0010 0x100
+       mww 0xffff0034 0x100
+       set reset_count [expr $reset_count+1]
+       echo "Testing reset $reset_count !"
+}
+
+proc target_pre_reset_0 {} {
+       global reset_count
+       set reset_count [expr $reset_count+1]
+       echo "Testing pre_reset $reset_count !"
+}