Rick Altherr <kc8apf@kc8apf.net> switch to new syntax for target events

[openocd.git] / src / target / target / hammer.cfg

diff --git a/src/target/target/hammer.cfg b/src/target/target/hammer.cfg
index b267861f42894cc1a90c6d22577ba024db65ee79..374236cdacdba06c8ad04590205bb8952ba66208 100644 (file)
--- a/src/target/target/hammer.cfg
+++ b/src/target/target/hammer.cfg
@@ -11,7 +11,32 @@ jtag_device 4 0x1 0xf 0xe
 
 target create target0 arm920t -endian little -chain-position 0 -variant arm920t
 [new_target_name] configure -work-area-virt 0 -work-area-phys 0x40800000 -work-area-size 0x20000 -work-area-backup 0
-[new_target_name] configure -event reset-init { script event/hammer_reset.script }
+[new_target_name] configure -event reset-init {
+       # Reset Script for the TinCanTools S3C2410 Based Hammer Module
+       # http://www.tincantools.com
+       #
+       # Setup primary clocks and initialize the SDRAM
+       mww 0x53000000 0x00000000
+       mww 0x4a000008 0xffffffff
+       mww 0x4a00000c 0x000007ff
+       mww 0x4c000000 0x00ffffff
+       mww 0x4c000014 0x00000003
+       mww 0x4c000004 0x000a1031
+       mww 0x48000000 0x11111122
+       mww 0x48000004 0x00000700
+       mww 0x48000008 0x00000700
+       mww 0x4800000c 0x00000700
+       mww 0x48000010 0x00000700
+       mww 0x48000014 0x00000700
+       mww 0x48000018 0x00000700
+       mww 0x4800001c 0x00018005
+       mww 0x48000020 0x00018005
+       mww 0x48000024 0x009c0459
+       mww 0x48000028 0x000000b2
+       mww 0x4800002c 0x00000030
+       mww 0x48000030 0x00000030
+       flash probe 0
+}
 
 # speed up memory downloads
 arm7 fast_memory_access enable