adding concept of production script

[openocd.git] / src / target / target / zy1000.cfg

diff --git a/src/target/target/zy1000.cfg b/src/target/target/zy1000.cfg
index d54925a580c94391c37de1cd2681dae3d158f440..00c577de35a5118ad40d4f85c49f8dddda52e4a2 100644 (file)
--- a/src/target/target/zy1000.cfg
+++ b/src/target/target/zy1000.cfg
@@ -22,32 +22,75 @@ arm7_9 dcc_downloads enable
 
 flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
 [new_target_name] configure -event reset-init { 
+       # Set up chip selects & timings
+       mww 0xFFE00000 0x0100273D
+       mww 0xFFE00004 0x08002125
+       mww 0xFFEe0008 0x02002125
+       mww 0xFFE0000c 0x03002125
+       mww 0xFFE00010 0x40000000
+       mww 0xFFE00014 0x50000000
+       mww 0xFFE00018 0x60000000
+       mww 0xFFE0001c 0x70000000
+       mww 0xFFE00020 0x00000001
+       mww 0xFFE00024 0x00000000
+       
+       # remap  
+       mww 0xFFFFF124 0xFFFFFFFF  
+       mww 0xffff0010 0x100
+       mww 0xffff0034 0x100
+       
+       #disable 16x5x UART interrupts
+       mww 0x08020004 0
+}
 
-# Set up chip selects & timings
-mww 0xFFE00000 0x0100273D
-mww 0xFFE00004 0x08002125
-mww 0xFFEe0008 0x02002125
-mww 0xFFE0000c 0x03002125
-mww 0xFFE00010 0x40000000
-mww 0xFFE00014 0x50000000
-mww 0xFFE00018 0x60000000
-mww 0xFFE0001c 0x70000000
-mww 0xFFE00020 0x00000001
-mww 0xFFE00024 0x00000000
+# required for usable performance. Used for lots of
+# other things than flash programming.
+working_area 0 0x00030000 0x20000 nobackup
 
-# remap  
-mww 0xFFFFF124 0xFFFFFFFF  
-mww 0xffff0010 0x100
-mww 0xffff0034 0x100
+jtag_khz 16000
 
-#disable 16x5x UART interrupts
-mww 0x08020004 0
 
+proc production_info {} {
+       return "Serial number is official MAC number"
+}
 
+proc production_help {} {
+       return "Serial number is MAC number. Format XXXXXXXXXXXXXX"
 }
 
-# required for usable performance. Used for lots of
-# other things than flash programming.
-working_area 0 0x00000000 0x20000 nobackup
+# There is no return value from this procedure. If it is
+# successful it does not throw an exception
+#
+# Progress messages are output via puts 
+proc production {firmwarefile serialnumber} {
+       if {[string length $serialnumber]!=12} {
+               puts "Invalid serial number"
+               return
+       }
 
-jtag_khz 16000
+       puts "Power cycling target"
+       power off
+       sleep 3000
+       power on
+       sleep 1000
+       reset init
+       flash write_image erase $firmwarefile 0x1000000 bin
+       verify_image $firmwarefile 0x1000000 bin
+
+       # Big endian... weee!!!!
+       puts "Setting MAC number to $serialnumber"      
+       flash fillw [expr 0x1030000-0x8] "0x[string range $serialnumber 2 3][string range $serialnumber 0 1]0000" 1
+       flash fillw [expr 0x1030000-0x4] "0x[string range $serialnumber 10 11][string range $serialnumber 8 9][string range $serialnumber 6 7][string range $serialnumber 4 5]" 1
+       puts "Production successful"
+} 
+
+
+proc production_test {} {
+       power on
+       sleep 1000
+       target_request debugmsgs enable
+       reset run
+       sleep 20000
+       target_request debugmsgs disable
+       return "See IP address above..."
+}
\ No newline at end of file