uint32_t addr, uint8_t *buf);
static int write_mem(struct target *t, uint32_t size,
uint32_t addr, const uint8_t *buf);
-static int calcaddr_physfromlin(struct target *t, uint32_t addr,
- uint32_t *physaddr);
+static int calcaddr_physfromlin(struct target *t, target_addr_t addr,
+ target_addr_t *physaddr);
static int read_phys_mem(struct target *t, uint32_t phys_address,
uint32_t size, uint32_t count, uint8_t *buffer);
static int write_phys_mem(struct target *t, uint32_t phys_address,
return ERROR_OK;
}
-int x86_32_common_virt2phys(struct target *t, uint32_t address, uint32_t *physical)
+int x86_32_common_virt2phys(struct target *t, target_addr_t address, target_addr_t *physical)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
} else {
/* target halted in protected mode */
if (calcaddr_physfromlin(t, address, physical) != ERROR_OK) {
- LOG_ERROR("%s failed to calculate physical address from 0x%08" PRIx32,
+ LOG_ERROR("%s failed to calculate physical address from " TARGET_ADDR_FMT,
__func__, address);
return ERROR_FAIL;
}
return ERROR_OK;
}
-int x86_32_common_read_phys_mem(struct target *t, uint32_t phys_address,
+int x86_32_common_read_phys_mem(struct target *t, target_addr_t phys_address,
uint32_t size, uint32_t count, uint8_t *buffer)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
return retval;
}
-int x86_32_common_write_phys_mem(struct target *t, uint32_t phys_address,
+int x86_32_common_write_phys_mem(struct target *t, target_addr_t phys_address,
uint32_t size, uint32_t count, const uint8_t *buffer)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
check_not_halted(t);
if (!count || !buffer || !phys_address) {
- LOG_ERROR("%s invalid params count=0x%" PRIx32 ", buf=%p, addr=0x%08" PRIx32,
+ LOG_ERROR("%s invalid params count=0x%" PRIx32 ", buf=%p, addr=" TARGET_ADDR_FMT,
__func__, count, buffer, phys_address);
return ERROR_COMMAND_ARGUMENT_INVALID;
}
return retval;
}
-int calcaddr_physfromlin(struct target *t, uint32_t addr, uint32_t *physaddr)
+int calcaddr_physfromlin(struct target *t, target_addr_t addr, target_addr_t *physaddr)
{
uint8_t entry_buffer[8];
return ERROR_OK;
}
-int x86_32_common_read_memory(struct target *t, uint32_t addr,
+int x86_32_common_read_memory(struct target *t, target_addr_t addr,
uint32_t size, uint32_t count, uint8_t *buf)
{
int retval = ERROR_OK;
struct x86_32_common *x86_32 = target_to_x86_32(t);
- LOG_DEBUG("addr=0x%08" PRIx32 ", size=%" PRIu32 ", count=0x%" PRIx32 ", buf=%p",
+ LOG_DEBUG("addr=" TARGET_ADDR_FMT ", size=%" PRIu32 ", count=0x%" PRIx32 ", buf=%p",
addr, size, count, buf);
check_not_halted(t);
if (!count || !buf || !addr) {
- LOG_ERROR("%s invalid params count=0x%" PRIx32 ", buf=%p, addr=0x%08" PRIx32,
+ LOG_ERROR("%s invalid params count=0x%" PRIx32 ", buf=%p, addr=" TARGET_ADDR_FMT,
__func__, count, buf, addr);
return ERROR_COMMAND_ARGUMENT_INVALID;
}
LOG_ERROR("%s could not disable paging", __func__);
return retval;
}
- uint32_t physaddr = 0;
+ target_addr_t physaddr = 0;
if (calcaddr_physfromlin(t, addr, &physaddr) != ERROR_OK) {
- LOG_ERROR("%s failed to calculate physical address from 0x%08" PRIx32, __func__, addr);
+ LOG_ERROR("%s failed to calculate physical address from " TARGET_ADDR_FMT,
+ __func__, addr);
retval = ERROR_FAIL;
}
/* TODO: !!! Watch out for page boundaries
if (retval == ERROR_OK
&& x86_32_common_read_phys_mem(t, physaddr, size, count, buf) != ERROR_OK) {
- LOG_ERROR("%s failed to read memory from physical address 0x%08" PRIx32, __func__, physaddr);
+ LOG_ERROR("%s failed to read memory from physical address " TARGET_ADDR_FMT,
+ __func__, physaddr);
retval = ERROR_FAIL;
}
/* restore PG bit if it was cleared prior (regardless of retval) */
} else {
/* paging is off - linear address is physical address */
if (x86_32_common_read_phys_mem(t, addr, size, count, buf) != ERROR_OK) {
- LOG_ERROR("%s failed to read memory from address 0%08" PRIx32, __func__, addr);
+ LOG_ERROR("%s failed to read memory from address " TARGET_ADDR_FMT,
+ __func__, addr);
retval = ERROR_FAIL;
}
}
return retval;
}
-int x86_32_common_write_memory(struct target *t, uint32_t addr,
+int x86_32_common_write_memory(struct target *t, target_addr_t addr,
uint32_t size, uint32_t count, const uint8_t *buf)
{
int retval = ERROR_OK;
struct x86_32_common *x86_32 = target_to_x86_32(t);
- LOG_DEBUG("addr=0x%08" PRIx32 ", size=%" PRIu32 ", count=0x%" PRIx32 ", buf=%p",
+ LOG_DEBUG("addr=" TARGET_ADDR_FMT ", size=%" PRIu32 ", count=0x%" PRIx32 ", buf=%p",
addr, size, count, buf);
check_not_halted(t);
if (!count || !buf || !addr) {
- LOG_ERROR("%s invalid params count=0x%" PRIx32 ", buf=%p, addr=0x%08" PRIx32,
+ LOG_ERROR("%s invalid params count=0x%" PRIx32 ", buf=%p, addr=" TARGET_ADDR_FMT,
__func__, count, buf, addr);
return ERROR_COMMAND_ARGUMENT_INVALID;
}
LOG_ERROR("%s could not disable paging", __func__);
return retval;
}
- uint32_t physaddr = 0;
+ target_addr_t physaddr = 0;
if (calcaddr_physfromlin(t, addr, &physaddr) != ERROR_OK) {
- LOG_ERROR("%s failed to calculate physical address from 0x%08" PRIx32,
+ LOG_ERROR("%s failed to calculate physical address from " TARGET_ADDR_FMT,
__func__, addr);
retval = ERROR_FAIL;
}
*/
if (retval == ERROR_OK
&& x86_32_common_write_phys_mem(t, physaddr, size, count, buf) != ERROR_OK) {
- LOG_ERROR("%s failed to write memory to physical address 0x%08" PRIx32,
+ LOG_ERROR("%s failed to write memory to physical address " TARGET_ADDR_FMT,
__func__, physaddr);
retval = ERROR_FAIL;
}
/* paging is off - linear address is physical address */
if (x86_32_common_write_phys_mem(t, addr, size, count, buf) != ERROR_OK) {
- LOG_ERROR("%s failed to write memory to address 0x%08" PRIx32,
+ LOG_ERROR("%s failed to write memory to address " TARGET_ADDR_FMT,
__func__, addr);
retval = ERROR_FAIL;
}
int x86_32_common_add_breakpoint(struct target *t, struct breakpoint *bp)
{
- LOG_DEBUG("type=%d, addr=0x%08" PRIx32, bp->type, bp->address);
+ LOG_DEBUG("type=%d, addr=" TARGET_ADDR_FMT, bp->type, bp->address);
if (check_not_halted(t))
return ERROR_TARGET_NOT_HALTED;
/* set_breakpoint() will return ERROR_TARGET_RESOURCE_NOT_AVAILABLE if all
int x86_32_common_remove_breakpoint(struct target *t, struct breakpoint *bp)
{
- LOG_DEBUG("type=%d, addr=0x%08" PRIx32, bp->type, bp->address);
+ LOG_DEBUG("type=%d, addr=" TARGET_ADDR_FMT, bp->type, bp->address);
if (check_not_halted(t))
return ERROR_TARGET_NOT_HALTED;
if (bp->set)
debug_reg_list[hwbp_num].used = 0;
debug_reg_list[hwbp_num].bp_value = 0;
- LOG_USER("%s hardware breakpoint %" PRIu32 " removed from 0x%08" PRIx32 " (hwreg=%d)",
+ LOG_USER("%s hardware breakpoint %" PRIu32 " removed from " TARGET_ADDR_FMT " (hwreg=%d)",
__func__, bp->unique_id, bp->address, hwbp_num);
return ERROR_OK;
}
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
LOG_DEBUG("id %" PRIx32, bp->unique_id);
- uint32_t physaddr;
+ target_addr_t physaddr;
uint8_t opcode = SW_BP_OPCODE;
uint8_t readback;
return ERROR_FAIL;
if (readback != SW_BP_OPCODE) {
- LOG_ERROR("%s software breakpoint error at 0x%08" PRIx32 ", check memory",
+ LOG_ERROR("%s software breakpoint error at " TARGET_ADDR_FMT ", check memory",
__func__, bp->address);
LOG_ERROR("%s readback=0x%02" PRIx8 " orig=0x%02" PRIx8 "",
__func__, readback, *bp->orig_instr);
addto = addto->next;
addto->next = new_patch;
}
- LOG_USER("%s software breakpoint %" PRIu32 " set at 0x%08" PRIx32,
+ LOG_USER("%s software breakpoint %" PRIu32 " set at " TARGET_ADDR_FMT,
__func__, bp->unique_id, bp->address);
return ERROR_OK;
}
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
LOG_DEBUG("id %" PRIx32, bp->unique_id);
- uint32_t physaddr;
+ target_addr_t physaddr;
uint8_t current_instr;
/* check that user program has not modified breakpoint instruction */
if (write_phys_mem(t, physaddr, 1, 1, bp->orig_instr))
return ERROR_FAIL;
} else {
- LOG_ERROR("%s software breakpoint remove error at 0x%08" PRIx32 ", check memory",
+ LOG_ERROR("%s software breakpoint remove error at " TARGET_ADDR_FMT ", check memory",
__func__, bp->address);
LOG_ERROR("%s current=0x%02" PRIx8 " orig=0x%02" PRIx8 "",
__func__, current_instr, *bp->orig_instr);
}
}
- LOG_USER("%s software breakpoint %" PRIu32 " removed from 0x%08" PRIx32,
+ LOG_USER("%s software breakpoint %" PRIu32 " removed from " TARGET_ADDR_FMT,
__func__, bp->unique_id, bp->address);
return ERROR_OK;
}
{
int error = ERROR_OK;
struct x86_32_common *x86_32 = target_to_x86_32(t);
- LOG_DEBUG("type=%d, addr=0x%08" PRIx32, bp->type, bp->address);
+ LOG_DEBUG("type=%d, addr=" TARGET_ADDR_FMT, bp->type, bp->address);
if (bp->set) {
LOG_ERROR("breakpoint already set");
return error;
if (bp->type == BKPT_HARD) {
error = set_hwbp(t, bp);
if (error != ERROR_OK) {
- LOG_ERROR("%s error setting hardware breakpoint at 0x%08" PRIx32,
+ LOG_ERROR("%s error setting hardware breakpoint at " TARGET_ADDR_FMT,
__func__, bp->address);
return error;
}
if (x86_32->sw_bpts_supported(t)) {
error = set_swbp(t, bp);
if (error != ERROR_OK) {
- LOG_ERROR("%s error setting software breakpoint at 0x%08" PRIx32,
+ LOG_ERROR("%s error setting software breakpoint at " TARGET_ADDR_FMT,
__func__, bp->address);
return error;
}
static int unset_breakpoint(struct target *t, struct breakpoint *bp)
{
- LOG_DEBUG("type=%d, addr=0x%08" PRIx32, bp->type, bp->address);
+ LOG_DEBUG("type=%d, addr=" TARGET_ADDR_FMT, bp->type, bp->address);
if (!bp->set) {
LOG_WARNING("breakpoint not set");
return ERROR_OK;
if (bp->type == BKPT_HARD) {
if (unset_hwbp(t, bp) != ERROR_OK) {
- LOG_ERROR("%s error removing hardware breakpoint at 0x%08" PRIx32,
+ LOG_ERROR("%s error removing hardware breakpoint at " TARGET_ADDR_FMT,
__func__, bp->address);
return ERROR_FAIL;
}
} else {
if (unset_swbp(t, bp) != ERROR_OK) {
- LOG_ERROR("%s error removing software breakpoint at 0x%08" PRIx32,
+ LOG_ERROR("%s error removing software breakpoint at " TARGET_ADDR_FMT,
__func__, bp->address);
return ERROR_FAIL;
}
struct x86_32_common *x86_32 = target_to_x86_32(t);
struct x86_32_dbg_reg *debug_reg_list = x86_32->hw_break_list;
int wp_num = 0;
- LOG_DEBUG("type=%d, addr=0x%08" PRIx32, wp->rw, wp->address);
+ LOG_DEBUG("type=%d, addr=" TARGET_ADDR_FMT, wp->rw, wp->address);
if (wp->set) {
LOG_ERROR("%s watchpoint already set", __func__);
wp->set = wp_num + 1;
debug_reg_list[wp_num].used = 1;
debug_reg_list[wp_num].bp_value = wp->address;
- LOG_USER("'%s' watchpoint %d set at 0x%08" PRIx32 " with length %" PRIu32 " (hwreg=%d)",
+ LOG_USER("'%s' watchpoint %d set at " TARGET_ADDR_FMT " with length %" PRIu32 " (hwreg=%d)",
wp->rw == WPT_READ ? "read" : wp->rw == WPT_WRITE ?
"write" : wp->rw == WPT_ACCESS ? "access" : "?",
wp->unique_id, wp->address, wp->length, wp_num);
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
struct x86_32_dbg_reg *debug_reg_list = x86_32->hw_break_list;
- LOG_DEBUG("type=%d, addr=0x%08" PRIx32, wp->rw, wp->address);
+ LOG_DEBUG("type=%d, addr=" TARGET_ADDR_FMT, wp->rw, wp->address);
if (!wp->set) {
LOG_WARNING("watchpoint not set");
return ERROR_OK;
debug_reg_list[wp_num].bp_value = 0;
wp->set = 0;
- LOG_USER("'%s' watchpoint %d removed from 0x%08" PRIx32 " with length %" PRIu32 " (hwreg=%d)",
+ LOG_USER("'%s' watchpoint %d removed from " TARGET_ADDR_FMT " with length %" PRIu32 " (hwreg=%d)",
wp->rw == WPT_READ ? "read" : wp->rw == WPT_WRITE ?
"write" : wp->rw == WPT_ACCESS ? "access" : "?",
wp->unique_id, wp->address, wp->length, wp_num);