int xscale_assert_reset(target_t *target);
int xscale_deassert_reset(target_t *target);
int xscale_soft_reset_halt(struct target_s *target);
-int xscale_prepare_reset_halt(struct target_s *target);
int xscale_set_reg_u32(reg_t *reg, u32 value);
.assert_reset = xscale_assert_reset,
.deassert_reset = xscale_deassert_reset,
.soft_reset_halt = xscale_soft_reset_halt,
- .prepare_reset_halt = xscale_prepare_reset_halt,
.get_gdb_reg_list = armv4_5_get_gdb_reg_list,
if (armv4_5->common_magic != ARMV4_5_COMMON_MAGIC)
{
- ERROR("target isn't an XScale target");
+ LOG_ERROR("target isn't an XScale target");
return -1;
}
if (xscale->common_magic != XSCALE_COMMON_MAGIC)
{
- ERROR("target isn't an XScale target");
+ LOG_ERROR("target isn't an XScale target");
return -1;
}
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
- ERROR("JTAG error while reading DCSR");
+ LOG_ERROR("JTAG error while reading DCSR");
return retval;
}
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
- ERROR("JTAG error while receiving data from debug handler");
+ LOG_ERROR("JTAG error while receiving data from debug handler");
break;
}
{
if (attempts++==1000)
{
- ERROR("Failed to receiving data from debug handler after 1000 attempts");
+ LOG_ERROR("Failed to receiving data from debug handler after 1000 attempts");
retval=ERROR_TARGET_TIMEOUT;
break;
}
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
- ERROR("JTAG error while reading TX");
+ LOG_ERROR("JTAG error while reading TX");
return ERROR_TARGET_TIMEOUT;
}
gettimeofday(&now, NULL);
if ((now.tv_sec > timeout.tv_sec) || ((now.tv_sec == timeout.tv_sec)&& (now.tv_usec > timeout.tv_usec)))
{
- ERROR("time out reading TX register");
+ LOG_ERROR("time out reading TX register");
return ERROR_TARGET_TIMEOUT;
}
if (!((!(field0_in & 1)) && consume))
goto done;
}
}
- DEBUG("waiting 10ms");
+ LOG_DEBUG("waiting 10ms");
usleep(10*1000); /* avoid flooding the logs */
}
done:
timeval_add_time(&timeout, 1, 0);
/* poll until rx_read is low */
- DEBUG("polling RX");
+ LOG_DEBUG("polling RX");
for (;;)
{
int i;
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
- ERROR("JTAG error while writing RX");
+ LOG_ERROR("JTAG error while writing RX");
return retval;
}
gettimeofday(&now, NULL);
if ((now.tv_sec > timeout.tv_sec) || ((now.tv_sec == timeout.tv_sec)&& (now.tv_usec > timeout.tv_usec)))
{
- ERROR("time out writing RX register");
+ LOG_ERROR("time out writing RX register");
return ERROR_TARGET_TIMEOUT;
}
if (!(field0_in & 1))
goto done;
}
- DEBUG("waiting 10ms");
+ LOG_DEBUG("waiting 10ms");
usleep(10*1000); /* wait 10ms to avoid flooding the logs */
}
done:
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
- ERROR("JTAG error while writing RX");
+ LOG_ERROR("JTAG error while writing RX");
return retval;
}
output[0] = *buffer;
break;
default:
- ERROR("BUG: size neither 4, 2 nor 1");
+ LOG_ERROR("BUG: size neither 4, 2 nor 1");
exit(-1);
}
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
- ERROR("JTAG error while sending data to debug handler");
+ LOG_ERROR("JTAG error while sending data to debug handler");
return retval;
}
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
- ERROR("JTAG error while writing DCSR");
+ LOG_ERROR("JTAG error while writing DCSR");
return retval;
}
v ^= v >> 8;
v ^= v >> 4;
v &= 0xf;
- DEBUG("parity of 0x%x is %i", ov, (0x6996 >> v) & 1);
+ LOG_DEBUG("parity of 0x%x is %i", ov, (0x6996 >> v) & 1);
return (0x6996 >> v) & 1;
}
scan_field_t fields[2];
- DEBUG("loading miniIC at 0x%8.8x", va);
+ LOG_DEBUG("loading miniIC at 0x%8.8x", va);
jtag_add_end_state(TAP_RTI);
xscale_jtag_set_instr(xscale->jtag_info.chain_pos, xscale->jtag_info.ldic); /* LDIC */
if (armv4_5->common_magic != ARMV4_5_COMMON_MAGIC)
{
- ERROR("BUG: called for a non-ARMv4/5 target");
+ LOG_ERROR("BUG: called for a non-ARMv4/5 target");
exit(-1);
}
- USER("target halted in %s state due to %s, current mode: %s\n"
+ LOG_USER("target halted in %s state due to %s, current mode: %s\n"
"cpsr: 0x%8.8x pc: 0x%8.8x\n"
"MMU: %s, D-Cache: %s, I-Cache: %s"
"%s",
}
else if (retval != ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
{
- USER("error while polling TX register, reset CPU");
+ LOG_USER("error while polling TX register, reset CPU");
/* here we "lie" so GDB won't get stuck and a reset can be perfomed */
target->state = TARGET_HALTED;
}
buf_set_u32(armv4_5->core_cache->reg_list[0].value, 0, 32, buffer[0]);
armv4_5->core_cache->reg_list[15].dirty = 1;
armv4_5->core_cache->reg_list[15].valid = 1;
- DEBUG("r0: 0x%8.8x", buffer[0]);
+ LOG_DEBUG("r0: 0x%8.8x", buffer[0]);
/* move pc from buffer to register cache */
buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, buffer[1]);
armv4_5->core_cache->reg_list[15].dirty = 1;
armv4_5->core_cache->reg_list[15].valid = 1;
- DEBUG("pc: 0x%8.8x", buffer[1]);
+ LOG_DEBUG("pc: 0x%8.8x", buffer[1]);
/* move data from buffer to register cache */
for (i = 1; i <= 7; i++)
buf_set_u32(armv4_5->core_cache->reg_list[i].value, 0, 32, buffer[1 + i]);
armv4_5->core_cache->reg_list[i].dirty = 1;
armv4_5->core_cache->reg_list[i].valid = 1;
- DEBUG("r%i: 0x%8.8x", i, buffer[i + 1]);
+ LOG_DEBUG("r%i: 0x%8.8x", i, buffer[i + 1]);
}
buf_set_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32, buffer[9]);
armv4_5->core_cache->reg_list[ARMV4_5_CPSR].dirty = 1;
armv4_5->core_cache->reg_list[ARMV4_5_CPSR].valid = 1;
- DEBUG("cpsr: 0x%8.8x", buffer[9]);
+ LOG_DEBUG("cpsr: 0x%8.8x", buffer[9]);
armv4_5->core_mode = buffer[9] & 0x1f;
if (armv4_5_mode_to_number(armv4_5->core_mode) == -1)
{
target->state = TARGET_UNKNOWN;
- ERROR("cpsr contains invalid mode value - communication failure");
+ LOG_ERROR("cpsr contains invalid mode value - communication failure");
return ERROR_TARGET_FAILURE;
}
- DEBUG("target entered debug state in %s mode", armv4_5_mode_strings[armv4_5_mode_to_number(armv4_5->core_mode)]);
+ LOG_DEBUG("target entered debug state in %s mode", armv4_5_mode_strings[armv4_5_mode_to_number(armv4_5->core_mode)]);
if (buffer[9] & 0x20)
armv4_5->core_state = ARMV4_5_STATE_THUMB;
break;
case 0x7: /* Reserved */
default:
- ERROR("Method of Entry is 'Reserved'");
+ LOG_ERROR("Method of Entry is 'Reserved'");
exit(-1);
break;
}
armv4_5_common_t *armv4_5 = target->arch_info;
xscale_common_t *xscale = armv4_5->arch_info;
- DEBUG("target->state: %s", target_state_strings[target->state]);
+ LOG_DEBUG("target->state: %s", target_state_strings[target->state]);
if (target->state == TARGET_HALTED)
{
- WARNING("target was already halted");
+ LOG_WARNING("target was already halted");
return ERROR_OK;
}
else if (target->state == TARGET_UNKNOWN)
{
/* this must not happen for a xscale target */
- ERROR("target was in unknown state when halt was requested");
+ LOG_ERROR("target was in unknown state when halt was requested");
return ERROR_TARGET_INVALID;
}
else if (target->state == TARGET_RESET)
{
- DEBUG("target->state == TARGET_RESET");
+ LOG_DEBUG("target->state == TARGET_RESET");
}
else
{
}
else
{
- ERROR("BUG: xscale->ibcr0_used is set, but no breakpoint with that address found");
+ LOG_ERROR("BUG: xscale->ibcr0_used is set, but no breakpoint with that address found");
exit(-1);
}
}
int retval;
int i;
- DEBUG("-");
+ LOG_DEBUG("-");
if (target->state != TARGET_HALTED)
{
- WARNING("target not halted");
+ LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
u32 next_pc;
/* there's a breakpoint at the current PC, we have to step over it */
- DEBUG("unset breakpoint at 0x%8.8x", breakpoint->address);
+ LOG_DEBUG("unset breakpoint at 0x%8.8x", breakpoint->address);
xscale_unset_breakpoint(target, breakpoint);
/* calculate PC of next instruction */
{
u32 current_opcode;
target_read_u32(target, current_pc, ¤t_opcode);
- ERROR("BUG: couldn't calculate PC of next instruction, current opcode was 0x%8.8x", current_opcode);
+ LOG_ERROR("BUG: couldn't calculate PC of next instruction, current opcode was 0x%8.8x", current_opcode);
}
- DEBUG("enable single-step");
+ LOG_DEBUG("enable single-step");
xscale_enable_single_step(target, next_pc);
/* restore banked registers */
/* send CPSR */
xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
- DEBUG("writing cpsr with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
+ LOG_DEBUG("writing cpsr with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
for (i = 7; i >= 0; i--)
{
/* send register */
xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32));
- DEBUG("writing r%i with value 0x%8.8x", i, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32));
+ LOG_DEBUG("writing r%i with value 0x%8.8x", i, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32));
}
/* send PC */
xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
- DEBUG("writing PC with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
+ LOG_DEBUG("writing PC with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
/* wait for and process debug entry */
xscale_debug_entry(target);
- DEBUG("disable single-step");
+ LOG_DEBUG("disable single-step");
xscale_disable_single_step(target);
- DEBUG("set breakpoint at 0x%8.8x", breakpoint->address);
+ LOG_DEBUG("set breakpoint at 0x%8.8x", breakpoint->address);
xscale_set_breakpoint(target, breakpoint);
}
}
/* send CPSR */
xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
- DEBUG("writing cpsr with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
+ LOG_DEBUG("writing cpsr with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
for (i = 7; i >= 0; i--)
{
/* send register */
xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32));
- DEBUG("writing r%i with value 0x%8.8x", i, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32));
+ LOG_DEBUG("writing r%i with value 0x%8.8x", i, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32));
}
/* send PC */
xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
- DEBUG("writing PC with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
+ LOG_DEBUG("writing PC with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
target->debug_reason = DBG_REASON_NOTHALTED;
target_call_event_callbacks(target, TARGET_EVENT_DEBUG_RESUMED);
}
- DEBUG("target resumed");
+ LOG_DEBUG("target resumed");
xscale->handler_running = 1;
if (target->state != TARGET_HALTED)
{
- WARNING("target not halted");
+ LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
{
u32 current_opcode;
target_read_u32(target, current_pc, ¤t_opcode);
- ERROR("BUG: couldn't calculate PC of next instruction, current opcode was 0x%8.8x", current_opcode);
+ LOG_ERROR("BUG: couldn't calculate PC of next instruction, current opcode was 0x%8.8x", current_opcode);
}
- DEBUG("enable single-step");
+ LOG_DEBUG("enable single-step");
xscale_enable_single_step(target, next_pc);
/* restore banked registers */
/* send CPSR */
xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
- DEBUG("writing cpsr with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
+ LOG_DEBUG("writing cpsr with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
for (i = 7; i >= 0; i--)
{
/* send register */
xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32));
- DEBUG("writing r%i with value 0x%8.8x", i, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32));
+ LOG_DEBUG("writing r%i with value 0x%8.8x", i, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32));
}
/* send PC */
xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
- DEBUG("writing PC with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
+ LOG_DEBUG("writing PC with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
/* wait for and process debug entry */
xscale_debug_entry(target);
- DEBUG("disable single-step");
+ LOG_DEBUG("disable single-step");
xscale_disable_single_step(target);
target_call_event_callbacks(target, TARGET_EVENT_HALTED);
xscale_set_breakpoint(target, breakpoint);
}
- DEBUG("target stepped");
+ LOG_DEBUG("target stepped");
return ERROR_OK;
armv4_5_common_t *armv4_5 = target->arch_info;
xscale_common_t *xscale = armv4_5->arch_info;
- DEBUG("target->state: %s", target_state_strings[target->state]);
+ LOG_DEBUG("target->state: %s", target_state_strings[target->state]);
/* TRST every time. We want to be able to support daemon_startup attach */
jtag_add_reset(1, 0);
breakpoint_t *breakpoint = target->breakpoints;
- DEBUG("-");
+ LOG_DEBUG("-");
xscale->ibcr_available = 2;
xscale->ibcr0_used = 0;
if ((binary_size = debug_handler.size) % 4)
{
- ERROR("debug_handler.bin: size not a multiple of 4");
+ LOG_ERROR("debug_handler.bin: size not a multiple of 4");
exit(-1);
}
if (binary_size > 0x800)
{
- ERROR("debug_handler.bin: larger than 2kb");
+ LOG_ERROR("debug_handler.bin: larger than 2kb");
exit(-1);
}
return ERROR_OK;
}
-int xscale_prepare_reset_halt(struct target_s *target)
-{
- /* nothing to be done for reset_halt on XScale targets
- * we always halt after a reset to upload the debug handler
- */
- return ERROR_OK;
-}
-
int xscale_read_core_reg(struct target_s *target, int num, enum armv4_5_mode mode)
{
int i, j;
- DEBUG("-");
+ LOG_DEBUG("-");
if (target->state != TARGET_HALTED)
{
- WARNING("target not halted");
+ LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
int i, j;
- DEBUG("-");
+ LOG_DEBUG("-");
if (target->state != TARGET_HALTED)
{
- WARNING("target not halted");
+ LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
int i;
int retval;
- DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address, size, count);
+ LOG_DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address, size, count);
if (target->state != TARGET_HALTED)
{
- WARNING("target not halted");
+ LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
*buffer++ = buf32[i] & 0xff;
break;
default:
- ERROR("should never get here");
+ LOG_ERROR("should never get here");
exit(-1);
}
}
xscale_common_t *xscale = armv4_5->arch_info;
int retval;
- DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address, size, count);
+ LOG_DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address, size, count);
if (target->state != TARGET_HALTED)
{
- WARNING("target not halted");
+ LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
buffer += 1;
break;
default:
- ERROR("should never get here");
+ LOG_ERROR("should never get here");
exit(-1);
}
}
if (target->state != TARGET_HALTED)
{
- WARNING("target not halted");
+ LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (breakpoint->set)
{
- WARNING("breakpoint already set");
+ LOG_WARNING("breakpoint already set");
return ERROR_OK;
}
}
else
{
- ERROR("BUG: no hardware comparator available");
+ LOG_ERROR("BUG: no hardware comparator available");
return ERROR_OK;
}
}
if (target->state != TARGET_HALTED)
{
- WARNING("target not halted");
+ LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (xscale->force_hw_bkpts)
{
- DEBUG("forcing use of hardware breakpoint at address 0x%8.8x", breakpoint->address);
+ LOG_DEBUG("forcing use of hardware breakpoint at address 0x%8.8x", breakpoint->address);
breakpoint->type = BKPT_HARD;
}
if ((breakpoint->type == BKPT_HARD) && (xscale->ibcr_available < 1))
{
- INFO("no breakpoint unit available for hardware breakpoint");
+ LOG_INFO("no breakpoint unit available for hardware breakpoint");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
else
if ((breakpoint->length != 2) && (breakpoint->length != 4))
{
- INFO("only breakpoints of two (Thumb) or four (ARM) bytes length supported");
+ LOG_INFO("only breakpoints of two (Thumb) or four (ARM) bytes length supported");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
if (target->state != TARGET_HALTED)
{
- WARNING("target not halted");
+ LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (!breakpoint->set)
{
- WARNING("breakpoint not set");
+ LOG_WARNING("breakpoint not set");
return ERROR_OK;
}
if (target->state != TARGET_HALTED)
{
- WARNING("target not halted");
+ LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (target->state != TARGET_HALTED)
{
- WARNING("target not halted");
+ LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
enable = 0x1;
break;
default:
- ERROR("BUG: watchpoint->rw neither read, write nor access");
+ LOG_ERROR("BUG: watchpoint->rw neither read, write nor access");
}
if (!xscale->dbr0_used)
}
else
{
- ERROR("BUG: no hardware comparator available");
+ LOG_ERROR("BUG: no hardware comparator available");
return ERROR_OK;
}
if (target->state != TARGET_HALTED)
{
- WARNING("target not halted");
+ LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (target->state != TARGET_HALTED)
{
- WARNING("target not halted");
+ LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (!watchpoint->set)
{
- WARNING("breakpoint not set");
+ LOG_WARNING("breakpoint not set");
return ERROR_OK;
}
if (target->state != TARGET_HALTED)
{
- WARNING("target not halted");
+ LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (target->state != TARGET_HALTED)
{
- WARNING("target must be stopped to read trace data");
+ LOG_WARNING("target must be stopped to read trace data");
return ERROR_TARGET_NOT_HALTED;
}
if (j == 256)
{
- DEBUG("no trace data collected");
+ LOG_DEBUG("no trace data collected");
return ERROR_XSCALE_NO_TRACE_DATA;
}
xscale->trace.current_pc - xscale->trace.image->sections[section].base_address,
4, buf, &size_read)) != ERROR_OK)
{
- ERROR("error while reading instruction: %i", retval);
+ LOG_ERROR("error while reading instruction: %i", retval);
return ERROR_TRACE_INSTRUCTION_UNAVAILABLE;
}
opcode = target_buffer_get_u32(target, buf);
xscale->trace.current_pc - xscale->trace.image->sections[section].base_address,
2, buf, &size_read)) != ERROR_OK)
{
- ERROR("error while reading instruction: %i", retval);
+ LOG_ERROR("error while reading instruction: %i", retval);
return ERROR_TRACE_INSTRUCTION_UNAVAILABLE;
}
opcode = target_buffer_get_u16(target, buf);
}
else
{
- ERROR("BUG: unknown core state encountered");
+ LOG_ERROR("BUG: unknown core state encountered");
exit(-1);
}
next_pc_ok = 1;
if (((chkpt == 0) && (next_pc != trace_data->chkpt0))
|| ((chkpt == 1) && (next_pc != trace_data->chkpt1)))
- WARNING("checkpointed indirect branch target address doesn't match checkpoint");
+ LOG_WARNING("checkpointed indirect branch target address doesn't match checkpoint");
}
/* explicit fall-through */
case 12: /* Checkpointed Direct Branch */
}
else
{
- WARNING("more than two checkpointed branches encountered");
+ LOG_WARNING("more than two checkpointed branches encountered");
}
break;
case 15: /* Roll-over */
continue;
default: /* Reserved */
command_print(cmd_ctx, "--- reserved trace message ---");
- ERROR("BUG: trace message %i is reserved", (trace_data->entries[i].data & 0xf0) >> 4);
+ LOG_ERROR("BUG: trace message %i is reserved", (trace_data->entries[i].data & 0xf0) >> 4);
return ERROR_OK;
}
if (argc < 5)
{
- ERROR("'target xscale' requires four arguments: <endianess> <startup_mode> <chain_pos> <variant>");
+ LOG_ERROR("'target xscale' requires four arguments: <endianess> <startup_mode> <chain_pos> <variant>");
return ERROR_OK;
}
if (argc < 2)
{
- ERROR("'xscale debug_handler <target#> <address>' command takes two required operands");
+
LOG_ERROR("'xscale debug_handler <target#> <address>' command takes two required operands");
return ERROR_OK;
}
if ((target = get_target_by_num(strtoul(args[0], NULL, 0))) == NULL)
{
- ERROR("no target '%s' configured", args[0]);
+ LOG_ERROR("no target '%s' configured", args[0]);
return ERROR_OK;
}
}
else
{
- ERROR("xscale debug_handler <address> must be between 0x800 and 0x1fef800 or between 0xfe000800 and 0xfffff800");
+
LOG_ERROR("xscale debug_handler <address> must be between 0x800 and 0x1fef800 or between 0xfe000800 and 0xfffff800");
}
return ERROR_OK;
if (argc < 2)
{
- ERROR("'xscale cache_clean_address <target#> <address>' command takes two required operands");
+
LOG_ERROR("'xscale cache_clean_address <target#> <address>' command takes two required operands");
return ERROR_OK;
}
if ((target = get_target_by_num(strtoul(args[0], NULL, 0))) == NULL)
{
- ERROR("no target '%s' configured", args[0]);
+ LOG_ERROR("no target '%s' configured", args[0]);
return ERROR_OK;
}
if (cache_clean_address & 0xffff)
{
- ERROR("xscale cache_clean_address <address> must be 64kb aligned");
+
LOG_ERROR("xscale cache_clean_address <address> must be 64kb aligned");
}
else
{
if (target->state != TARGET_HALTED)
{
- ERROR("Target not halted");
+ LOG_ERROR("Target not halted");
return ERROR_TARGET_INVALID;
}
*enabled = xscale->armv4_5_mmu.mmu_enabled;
Code Review / openocd.git / blobdiff