mips32_core_reg_t -> struct mips32_core_reg
[openocd.git] / src / target / xscale.c
index c4d22b1d0d2b86f0934a122d48186da560e6329c..a04bf429541906032d4fb23d7762b5b61faae073 100644 (file)
@@ -64,7 +64,7 @@ static int xscale_restore_context(target_t *);
 static int xscale_get_reg(reg_t *reg);
 static int xscale_set_reg(reg_t *reg, uint8_t *buf);
 static int xscale_set_breakpoint(struct target_s *, breakpoint_t *);
-static int xscale_set_watchpoint(struct target_s *, watchpoint_t *);
+static int xscale_set_watchpoint(struct target_s *, struct watchpoint *);
 static int xscale_unset_breakpoint(struct target_s *, breakpoint_t *);
 static int xscale_read_trace(target_t *);
 
@@ -163,7 +163,7 @@ static int xscale_jtag_set_instr(struct jtag_tap *tap, uint32_t new_instr)
 
        if (buf_get_u32(tap->cur_instr, 0, tap->ir_length) != new_instr)
        {
-               scan_field_t field;
+               struct scan_field field;
                uint8_t scratch[4];
 
                memset(&field, 0, sizeof field);
@@ -182,7 +182,7 @@ static int xscale_read_dcsr(target_t *target)
 {
        struct xscale_common_s *xscale = target_to_xscale(target);
        int retval;
-       scan_field_t fields[3];
+       struct scan_field fields[3];
        uint8_t field0 = 0x0;
        uint8_t field0_check_value = 0x2;
        uint8_t field0_check_mask = 0x7;
@@ -258,7 +258,7 @@ static int xscale_receive(target_t *target, uint32_t *buffer, int num_words)
 
        int retval = ERROR_OK;
        tap_state_t path[3];
-       scan_field_t fields[3];
+       struct scan_field fields[3];
        uint8_t *field0 = malloc(num_words * 1);
        uint8_t field0_check_value = 0x2;
        uint8_t field0_check_mask = 0x6;
@@ -362,7 +362,7 @@ static int xscale_read_tx(target_t *target, int consume)
        tap_state_t noconsume_path[6];
        int retval;
        struct timeval timeout, now;
-       scan_field_t fields[3];
+       struct scan_field fields[3];
        uint8_t field0_in = 0x0;
        uint8_t field0_check_value = 0x2;
        uint8_t field0_check_mask = 0x6;
@@ -458,7 +458,7 @@ static int xscale_write_rx(target_t *target)
        struct xscale_common_s *xscale = target_to_xscale(target);
        int retval;
        struct timeval timeout, now;
-       scan_field_t fields[3];
+       struct scan_field fields[3];
        uint8_t field0_out = 0x0;
        uint8_t field0_in = 0x0;
        uint8_t field0_check_value = 0x2;
@@ -614,7 +614,7 @@ static int xscale_write_dcsr(target_t *target, int hold_rst, int ext_dbg_brk)
 {
        struct xscale_common_s *xscale = target_to_xscale(target);
        int retval;
-       scan_field_t fields[3];
+       struct scan_field fields[3];
        uint8_t field0 = 0x0;
        uint8_t field0_check_value = 0x2;
        uint8_t field0_check_mask = 0x7;
@@ -686,7 +686,7 @@ static int xscale_load_ic(target_t *target, uint32_t va, uint32_t buffer[8])
        uint8_t packet[4];
        uint8_t cmd;
        int word;
-       scan_field_t fields[2];
+       struct scan_field fields[2];
 
        LOG_DEBUG("loading miniIC at 0x%8.8" PRIx32 "", va);
 
@@ -740,7 +740,7 @@ static int xscale_invalidate_ic_line(target_t *target, uint32_t va)
 {
        uint8_t packet[4];
        uint8_t cmd;
-       scan_field_t fields[2];
+       struct scan_field fields[2];
 
        jtag_set_end_state(TAP_IDLE);
        xscale_jtag_set_instr(target->tap, XSCALE_LDIC);
@@ -1163,7 +1163,7 @@ static int xscale_disable_single_step(struct target_s *target)
 
 static void xscale_enable_watchpoints(struct target_s *target)
 {
-       watchpoint_t *watchpoint = target->watchpoints;
+       struct watchpoint *watchpoint = target->watchpoints;
 
        while (watchpoint)
        {
@@ -2226,7 +2226,7 @@ static int xscale_remove_breakpoint(struct target_s *target, breakpoint_t *break
 }
 
 static int xscale_set_watchpoint(struct target_s *target,
-               watchpoint_t *watchpoint)
+               struct watchpoint *watchpoint)
 {
        struct xscale_common_s *xscale = target_to_xscale(target);
        uint8_t enable = 0;
@@ -2282,7 +2282,7 @@ static int xscale_set_watchpoint(struct target_s *target,
 }
 
 static int xscale_add_watchpoint(struct target_s *target,
-               watchpoint_t *watchpoint)
+               struct watchpoint *watchpoint)
 {
        struct xscale_common_s *xscale = target_to_xscale(target);
 
@@ -2308,7 +2308,7 @@ static int xscale_add_watchpoint(struct target_s *target,
 }
 
 static int xscale_unset_watchpoint(struct target_s *target,
-               watchpoint_t *watchpoint)
+               struct watchpoint *watchpoint)
 {
        struct xscale_common_s *xscale = target_to_xscale(target);
        reg_t *dbcon = &xscale->reg_cache->reg_list[XSCALE_DBCON];
@@ -2343,7 +2343,7 @@ static int xscale_unset_watchpoint(struct target_s *target,
        return ERROR_OK;
 }
 
-static int xscale_remove_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
+static int xscale_remove_watchpoint(struct target_s *target, struct watchpoint *watchpoint)
 {
        struct xscale_common_s *xscale = target_to_xscale(target);
 

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)