Remove annoying end-of-line whitespace from tcl/* files

[openocd.git] / tcl / board / csb732.cfg

diff --git a/tcl/board/csb732.cfg b/tcl/board/csb732.cfg
index 8bf77cb3b348c115a07182dd75a5494dabf42378..178732304c0655d3ae1f602ef65171f343f34d13 100644 (file)
--- a/tcl/board/csb732.cfg
+++ b/tcl/board/csb732.cfg
@@ -11,7 +11,7 @@ $_TARGETNAME configure -event reset-init { csb732_init }
 
 # Bare-bones initialization of core clocks and SDRAM
 proc csb732_init { } {
-       
+
        # Disable fast writing only for init
        memwrite burst disable
 
@@ -29,17 +29,17 @@ proc csb732_init { } {
 
        # Set ARM clock to 532 MHz, AHB to 133 MHz
        mww 0x53F80004 0x1000
-       
+
        # Set core clock to 2 * 24 MHz * (11 + 1/12) = 532 MHz
        mww 0x53F8001C 0xB2C01
-       
+
        set ESDMISC 0xB8001010
        set ESDCFG0 0xB8001004
        set ESDCTL0 0xB8001000
 
        # Enable DDR
        mww $ESDMISC 0x4
-       
+
        # Timing
        mww $ESDCFG0 0x007fff3f
 
@@ -51,7 +51,7 @@ proc csb732_init { } {
 
        # Enable CS) auto-refresh
        mww $ESDCTL0 0xA2120080
-       
+
        # Refresh twice (dummy writes)
        mww 0x80000000 0
        mww 0x80000000 0
@@ -59,7 +59,7 @@ proc csb732_init { } {
        # Enable CS0 load mode register
        mww $ESDCTL0 0xB2120080
 
-       # Dummy writes  
+       # Dummy writes
        mwb 0x80000033 0x01
        mwb 0x81000000 0x01