tcl/board: add Linksys WAG200G config

[openocd.git] / tcl / board / mcb1700.cfg

diff --git a/tcl/board/mcb1700.cfg b/tcl/board/mcb1700.cfg
index 845c7e20fb6b8154190c2241dacda83a51168bed..068a19b24d5c3c19c25c82e2958e45d5bc9fd12e 100644 (file)
--- a/tcl/board/mcb1700.cfg
+++ b/tcl/board/mcb1700.cfg
@@ -3,7 +3,7 @@
 # Reset init script sets it to 100MHz
 set CCLK 100000
 
-source [find target/lpc1768.cfg] 
+source [find target/lpc17xx.cfg]
 
 global MCB1700_CCLK
 set MCB1700_CCLK $CCLK
@@ -11,7 +11,7 @@ set MCB1700_CCLK $CCLK
 $_TARGETNAME configure -event reset-start {
        # Start *real slow* as we do not know the
     # state the boot rom left the clock in
-       jtag_khz 10
+       adapter_khz 10
 }
 
 # Set up 100MHz clock to CPU
@@ -55,7 +55,7 @@ $_TARGETNAME configure -event reset-init {
        #
        # 
        global MCB1700_CCLK
-       jtag_khz [expr $MCB1700_CCLK / 8]
+       adapter_khz [expr $MCB1700_CCLK / 8]
 
        # Do not remap 0x0000-0x0020 to anything but the flash (i.e. select
        # "User Flash Mode" where interrupt vectors are _not_ remapped,