stm32f0/nucleo: Use only one configuration for all stm32f0 nucleo boards.

[openocd.git] / tcl / board / stm3210e_eval.cfg

diff --git a/tcl/board/stm3210e_eval.cfg b/tcl/board/stm3210e_eval.cfg
index ab2f64f0aaeee028c2ff9dc87c988e7a085ed0e7..91807ce3094906861e6bb70d5d4b2ee4a573f1d2 100644 (file)
--- a/tcl/board/stm3210e_eval.cfg
+++ b/tcl/board/stm3210e_eval.cfg
@@ -1,3 +1,63 @@
-# This is an STM32 eval board with a single STM32F103ZET6 chip on it.
+# This is an STM32 eval board with a single STM32F103ZET6 chip.
+# http://www.st.com/internet/evalboard/product/204176.jsp
 
-source [find target/stm32.cfg]
+# increase working area to 32KB for faster flash programming
+set WORKAREASIZE 0x8000
+
+source [find target/stm32f1x.cfg]
+
+#
+# configure FSMC Bank 1 (NOR/PSRAM Bank 2) NOR flash
+# M29W128GL70ZA6E
+#
+
+set _FLASHNAME $_CHIPNAME.norflash
+flash bank $_FLASHNAME cfi 0x64000000 0x01000000 2 2 $_TARGETNAME
+
+proc stm32_enable_fsmc {} {
+
+       echo "Enabling FSMC Bank 1 (NOR/PSRAM Bank 2)"
+       
+       # enable gpio (defg) clocks for fsmc
+       # RCC_APB2ENR
+       mww 0x40021018 0x000001E0
+       
+       # enable fsmc clock
+       # RCC_AHBENR
+       mww 0x40021014 0x00000114
+
+       # configure gpio to alternate function
+       # GPIOD_CRL
+       mww 0x40011400 0x44BB44BB
+       # GPIOD_CRH
+       mww 0x40011404 0xBBBBBBBB
+       
+       # GPIOE_CRL
+       mww 0x40011800 0xBBBBB444
+       # GPIOE_CRH
+       mww 0x40011804 0xBBBBBBBB
+       
+       # GPIOF_CRL
+       mww 0x40011C00 0x44BBBBBB
+       # GPIOF_CRH
+       mww 0x40011C04 0xBBBB4444
+       
+       # GPIOG_CRL
+       mww 0x40012000 0x44BBBBBB
+       # GPIOG_CRH
+       mww 0x40012004 0x444444B4
+       
+       # setup fsmc timings
+       # FSMC_BCR1
+       mww 0xA0000008 0x00001058
+       
+       # FSMC_BTR1
+       mww 0xA000000C 0x10000502
+       
+       # FSMC_BCR1 - enable fsmc
+       mww 0xA0000008 0x00001059
+}
+
+$_TARGETNAME configure -event reset-init {
+       stm32_enable_fsmc
+}