update 'flash bank' usage in scripts

[openocd.git] / tcl / board / str910-eval.cfg

diff --git a/tcl/board/str910-eval.cfg b/tcl/board/str910-eval.cfg
index 10a2100bc44ccd8bbf1651b4cd32a2f734c5c422..0cf794aecedde62ab568ede79808792a086986c1 100644 (file)
--- a/tcl/board/str910-eval.cfg
+++ b/tcl/board/str910-eval.cfg
@@ -1,17 +1,17 @@
 # str910-eval eval board
-# 
-# Need reset scripts 
+#
+# Need reset scripts
 reset_config trst_and_srst
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME str912
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
    set  _ENDIAN little
 }
 
@@ -39,23 +39,25 @@ jtag newtap $_CHIPNAME bs    -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_
 
 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
 target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
-$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-virt 0x50000000 -work-area-size 16384 -work-area-backup 1
+$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 1
 
 $_TARGETNAME configure -event reset-init {
        # We can increase speed now that we know the target is halted.
        #jtag_rclk 3000
-       
+
        # -- Enable 96K RAM
        # PFQBC enabled / DTCM & AHB wait-states disabled
-       mww 0x5C002034 0x0191 
+       mww 0x5C002034 0x0191
 
        str9x flash_config 0 4 2 0 0x80000
        flash protect 0 0 7 off
 }
 
 #flash bank str9x <base> <size> 0 0 <target#> <variant>
-flash bank str9x 0x00000000 0x00080000 0 0 0
-flash bank str9x 0x00080000 0x00008000 0 0 0
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0
 
 # For more information about the configuration files, take a look at:
 # openocd.texi