tcl: Adapt config files to new ftdi command syntax

[openocd.git] / tcl / interface / ftdi / minimodule.cfg

diff --git a/tcl/interface/ftdi/minimodule.cfg b/tcl/interface/ftdi/minimodule.cfg
index 5dcce1fcf96302e61977cc42472df11784dbf46a..6b2d60c07c1b29e1114f9e4d11a2fb3f6447230f 100644 (file)
--- a/tcl/interface/ftdi/minimodule.cfg
+++ b/tcl/interface/ftdi/minimodule.cfg
@@ -5,12 +5,12 @@
 #
 
 adapter driver ftdi
-ftdi_device_desc "FT2232H MiniModule"
-ftdi_vid_pid 0x0403 0x6010
+ftdi device_desc "FT2232H MiniModule"
+ftdi vid_pid 0x0403 0x6010
 
 # Every pin set as high impedance except TCK, TDI, TDO and TMS
-ftdi_layout_init 0x0008 0x000b
+ftdi layout_init 0x0008 0x000b
 
 # nSRST defined on pin CN2-13 of the MiniModule (pin ADBUS5 [AD5] on the FT2232H chip)
 # This choice is arbitrary. Use other GPIO pin if desired.
-ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020
+ftdi layout_signal nSRST -data 0x0020 -oe 0x0020