interface/ftdi/xds100v2.cfg: Add another VID/PID, drop desc

[openocd.git] / tcl / interface / ftdi / xds100v2.cfg

diff --git a/tcl/interface/ftdi/xds100v2.cfg b/tcl/interface/ftdi/xds100v2.cfg
index fcdce37cbeb57aa4759b1f51eda0fd4613583eb4..44508aece1a7c1080e119bd4ddae172dad728214 100644 (file)
--- a/tcl/interface/ftdi/xds100v2.cfg
+++ b/tcl/interface/ftdi/xds100v2.cfg
@@ -4,16 +4,10 @@
 # http://processors.wiki.ti.com/index.php/XDS100#XDS100v2_Features
 #
 
-echo "WARNING!"
-echo "This file was not tested with real interface, it is based on schematics and code"
-echo "in ft2232.c. Please report your experience with this file to openocd-devel"
-echo "mailing list, so it could be marked as working or fixed."
-
 interface ftdi
-ftdi_device_desc "Texas Instruments Inc.XDS100 Ver 2.0"
-ftdi_vid_pid 0x0403 0xa6d0
+ftdi_vid_pid 0x0403 0xa6d0 0x0403 0x6010
 
-ftdi_layout_init 0x0838 0x597b
+ftdi_layout_init 0x0038 0x597b
 ftdi_layout_signal nTRST -data 0x0010
 ftdi_layout_signal nSRST -oe 0x0100
 ftdi_layout_signal nEMU_EN -data 0x0020
@@ -21,3 +15,5 @@ ftdi_layout_signal nEMU0 -data 0x0040
 ftdi_layout_signal nEMU1 -data 0x1000
 ftdi_layout_signal PWR_RST -data 0x0800
 ftdi_layout_signal LOOPBACK -data 0x4000
+
+echo "\nInfo : to use this adapter you MUST add ``init; ftdi_set_signal PWR_RST 1; jtag arp_init'' to the end of your config file!\n"