tcl: target: icepick: add icepick_d_tapenable procedure

[openocd.git] / tcl / target / am335x.cfg

diff --git a/tcl/target/am335x.cfg b/tcl/target/am335x.cfg
index af06f79ad0800a0969780caedcdd6eea6591b2c8..6fad92c311db7c183b10f7a0f006e15d6398eed4 100644 (file)
--- a/tcl/target/am335x.cfg
+++ b/tcl/target/am335x.cfg
@@ -1,3 +1,4 @@
+source [find target/icepick.cfg]
 
 if { [info exists CHIPNAME] } {
    set _CHIPNAME $CHIPNAME
@@ -5,26 +6,6 @@ if { [info exists CHIPNAME] } {
    set _CHIPNAME am335x
 }
 
-# This chip contains an IcePick-D JTAG router.  The IcePick-C configuration is almost
-# compatible, but it doesn't work.  For now, we will just embed the IcePick-D
-# routines here.
-proc icepick_d_tapenable {jrc port} {
-       # select router
-       irscan $jrc 7 -endstate IRPAUSE
-       drscan $jrc 8 0x89 -endstate DRPAUSE
-
-       # set ip control
-       irscan $jrc 2 -endstate IRPAUSE
-       drscan $jrc 32 [expr 0xa0002108 + ($port << 24)] -endstate DRPAUSE
-
-       # for icepick_D
-       irscan $jrc 2 -endstate IRPAUSE
-       drscan $jrc 32 0xe0002008 -endstate DRPAUSE
-
-       irscan $jrc 0x3F -endstate RUN/IDLE
-       runtest 10
-}
-
 #
 # M3 DAP
 #