tcl: replace the deprecated commands with "adapter ..."

[openocd.git] / tcl / target / amdm37x.cfg

diff --git a/tcl/target/amdm37x.cfg b/tcl/target/amdm37x.cfg
index 5c4e3151d3c4b2587f14654d98982b86ccf80329..7098adfa3482b7113cb0893fb7cde5455cb185be 100644 (file)
--- a/tcl/target/amdm37x.cfg
+++ b/tcl/target/amdm37x.cfg
@@ -45,7 +45,7 @@ if { [info exists CHIPTYPE] } {
 
 # Run the adapter at the fastest acceptable speed with the slowest possible
 # core clock.
-adapter_khz 10
+adapter speed 10
 
 ###############################################################################
 # JTAG setup
@@ -157,7 +157,7 @@ $_TARGETNAME configure -work-area-phys 0x40200000 -work-area-size 0x4000
 #  slowest possible core clock (16.8MHz/2 = 8.4MHz). It is OK to speed up
 #  *after* PLL and clock tree setup.
 
-$_TARGETNAME configure -event "reset-start" { adapter_khz 10 }
+$_TARGETNAME configure -event "reset-start" { adapter speed 10 }
 
 # Describe the reset assert process for openocd - this is asserted with the
 # ICEPick
@@ -176,7 +176,7 @@ $_TARGETNAME configure -event reset-assert-post {
 
    global _TARGETNAME
    amdm37x_dbginit $_TARGETNAME
-   adapter_khz 1000
+   adapter speed 1000
 }
 
 $_TARGETNAME configure -event gdb-attach {