jtag: linuxgpiod: drop extra parenthesis

[openocd.git] / tcl / target / at91sam3XXX.cfg

diff --git a/tcl/target/at91sam3XXX.cfg b/tcl/target/at91sam3XXX.cfg
index f36475b6d46ec754397167f294a13644f9f96af0..ba1c3c563eec941a3f6cbe220ed78fcbda4a0b05 100644 (file)
--- a/tcl/target/at91sam3XXX.cfg
+++ b/tcl/target/at91sam3XXX.cfg
@@ -1,4 +1,6 @@
-# script for ATMEL sam3, a CORTEX-M3 chip
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# script for ATMEL sam3, a Cortex-M3 chip
 #
 # at91sam3u4e
 # at91sam3u2e
@@ -55,9 +57,10 @@ if { [info exists CPUTAPID] } {
 }
 
 swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
 
 # 16K is plenty, the smallest chip has this much
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
@@ -73,13 +76,15 @@ $_TARGETNAME configure -event gdb-flash-erase-start {
 # running off a crystal, we can run closer to the limit. Note
 # that there can be a pretty wide band where things are more or less stable.
 
-adapter_khz 500
+adapter speed 500
 
-adapter_nsrst_delay 100
-if {$using_jtag} {
+adapter srst delay 100
+if {[using_jtag]} {
    jtag_ntrst_delay 100
 }
 
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m reset_config sysresetreq
+if {![using_hla]} {
+   # if srst is not fitted use SYSRESETREQ to
+   # perform a soft reset
+   cortex_m reset_config sysresetreq
+}