Allow transports to override the selected target (hla configs unification)

[openocd.git] / tcl / target / at91sam3nXX.cfg

diff --git a/tcl/target/at91sam3nXX.cfg b/tcl/target/at91sam3nXX.cfg
index 32f163e320b355d6c6d02b18c37aef38972dacfb..19bd33a9e8f801a5e76e7a0089f65c024f95f88d 100644 (file)
--- a/tcl/target/at91sam3nXX.cfg
+++ b/tcl/target/at91sam3nXX.cfg
@@ -3,6 +3,8 @@
 # Configuration for Atmel's SAM3N series
 #
 
 # Configuration for Atmel's SAM3N series
 #
 

+source [find target/swj-dp.tcl]
+

 if { [info exists CHIPNAME] } {
        set _CHIPNAME $CHIPNAME
 } else {
 if { [info exists CHIPNAME] } {
        set _CHIPNAME $CHIPNAME
 } else {


@@ -15,7 +17,7 @@ if { [info exists CPUTAPID] } {
        set _CPUTAPID 0x4ba00477
 }
 
        set _CPUTAPID 0x4ba00477
 }
 

-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID

 
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME cortex_m -endian little -chain-position $_TARGETNAME
 
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME cortex_m -endian little -chain-position $_TARGETNAME


@@ -23,7 +25,8 @@ target create $_TARGETNAME cortex_m -endian little -chain-position $_TARGETNAME
 set _FLASHNAME $_CHIPNAME.flash
 flash bank flash0 at91sam3 0x00400000 0 0 0 $_TARGETNAME
 
 set _FLASHNAME $_CHIPNAME.flash
 flash bank flash0 at91sam3 0x00400000 0 0 0 $_TARGETNAME
 

-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m reset_config sysresetreq
-
+if {![using_hla]} {
+   # if srst is not fitted use SYSRESETREQ to
+   # perform a soft reset
+   cortex_m reset_config sysresetreq
+}