at91sam3s* support

[openocd.git] / tcl / target / at91sam3uXX.cfg

diff --git a/tcl/target/at91sam3uXX.cfg b/tcl/target/at91sam3uXX.cfg
index 26bb2a03dd1a21b6f0e467ff552d30faa530fb23..a11afc0b73442cfefef4fc7c16a481adbbc739c8 100644 (file)
--- a/tcl/target/at91sam3uXX.cfg
+++ b/tcl/target/at91sam3uXX.cfg
@@ -1,47 +1,11 @@
 # script for ATMEL sam3, a CORTEX-M3 chip
 #
-#  at91sam3u4e
-#  at91sam3u2e
-#  at91sam3u1e
-#  at91sam3u4c
-#  at91sam3u2c
-#  at91sam3u1c
+# at91sam3u4e
+# at91sam3u2e
+# at91sam3u1e
+# at91sam3u4c
+# at91sam3u2c
+# at91sam3u1c
 
-if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
-} else {
-   set  _CHIPNAME sam3
-}
+source [find target/at91sam3XXX.cfg]
 
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-   set  _ENDIAN little
-}
-
-
-#jtag scan chain
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0x4ba00477
-}
-
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
-
-# 16K is plenty, the smallest chip has this much
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
-
-reset_config srst_only
-
-# GDB can use this
-gdb_memory_map enable
-# And GDB can flash the chip
-gdb_flash_program enable
-
-$_TARGETNAME configure -event gdb-flash-erase-start {
-    halt
-}