rename jtag_khz as adapter_khz

[openocd.git] / tcl / target / c100helper.tcl

diff --git a/tcl/target/c100helper.tcl b/tcl/target/c100helper.tcl
index 54fe07f080ca80de07d0923b8238cbb386031cd1..1fd58b6574281781e3d4522716455e569e30d377 100644 (file)
--- a/tcl/target/c100helper.tcl
+++ b/tcl/target/c100helper.tcl
@@ -436,22 +436,22 @@ proc initC100 {} {
     #   */
     #  mov     r0, #0
     #  mcr     p15, 0, r0, c7, c7, 0   /* flush v3/v4 cache */
-    mcr 15 0 7 7 0 0x0
+    arm mcr 15 0 7 7 0 0x0
     #  mcr     p15, 0, r0, c8, c7, 0   /* flush v4 TLB */
-    mcr 15 0 8 7 0 0x0
+    arm mcr 15 0 8 7 0 0x0
 
     #  /*
     #   * disable MMU stuff and caches
     #   */
     #  mrc     p15, 0, r0, c1, c0, 0
-    mrc 15 0 1 0 0
+    arm mrc 15 0 1 0 0
     #  bic     r0, r0, #0x00002300     @ clear bits 13, 9:8 (--V- --RS)
     #  bic     r0, r0, #0x00000087     @ clear bits 7, 2:0 (B--- -CAM)
     #  orr     r0, r0, #0x00000002     @ set bit 2 (A) Align
     #  orr     r0, r0, #0x00001000     @ set bit 12 (I) I-Cache
     #  orr     r0, r0, #0x00400000     @ set bit 22 (U)
     #  mcr     p15, 0, r0, c1, c0, 0
-    mcr 15 0 1 0 0 0x401002
+    arm mcr 15 0 1 0 0 0x401002
     # This is from bsp_init() in u-boot/boards/mindspeed/ooma-darwin/board.c
     # APB init
     #          // Setting APB Bus Wait states to 1, set post write
@@ -504,7 +504,7 @@ proc reboot {} {
     mww $TIMER_WDT_HIGH_BOUND  0xffffff
     mww $TIMER_WDT_CURRENT_COUNT 0x0
     puts "JTAG speed lowered to 100kHz"
-    jtag_khz 100
+    adapter_khz 100
     mww $TIMER_WDT_CONTROL 0x1
     # wait until the reset
     puts -nonewline "Wating for watchdog to trigger..."