partial support for 568013 and 568037, target integration.

[openocd.git] / tcl / target / dsp568013.cfg

diff --git a/tcl/target/dsp568013.cfg b/tcl/target/dsp568013.cfg
new file mode 100644 (file)
index 0000000..1940309
--- /dev/null
+++ b/tcl/target/dsp568013.cfg
@@ -0,0 +1,73 @@
+# Script for freescale DSP568013
+
+if { [info exists CHIPNAME] } {        
+   set  _CHIPNAME $CHIPNAME    
+} else {        
+   set  _CHIPNAME dsp568013
+}
+
+if { [info exists ENDIAN] } {  
+   set  _ENDIAN $ENDIAN    
+} else {        
+  # this defaults to a big endian
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0x01f2401d
+}
+
+#jtag speed
+adapter_khz 800
+
+reset_config srst_only
+
+#MASTER tap
+jtag newtap $_CHIPNAME chp -irlen 8 -ircapture 1 -irmask 0x03 -expected-id $_CPUTAPID
+
+#CORE tap
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0x03 -disable -expected-id 0x02211004
+
+#target configuration - There is only 1 tap at a time, hence only 1 target is defined.
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME dsp5680xx -endian $_ENDIAN -chain-position $_TARGETNAME
+
+# Setup the interesting tap
+jtag configure $_CHIPNAME.chp -event setup "jtag tapenable $_TARGETNAME"
+
+#select CORE tap by modifying the TLM register.
+#to be used when MASTER tap is selected.
+jtag configure $_TARGETNAME -event tap-enable "
+     irscan $_CHIPNAME.chp 0x05;
+     drscan $_CHIPNAME.chp 4 0x02;
+     jtag tapdisable $_CHIPNAME.chp;
+"
+
+#select MASTER tap by modifying the TLM register.
+#to be used when CORE tap is selected.
+jtag configure $_CHIPNAME.chp -event tap-enable "
+     irscan $_TARGETNAME 0x08;
+     drscan $_TARGETNAME 4 0x1;
+     jtag tapdisable $_TARGETNAME;
+"
+
+#disables the master tap
+jtag configure $_TARGETNAME -event tap-disable "
+"
+#TODO FIND  SMARTER WAY.
+
+jtag configure $_CHIPNAME.chp -event tap-disable "
+"
+#TODO FIND  SMARTER WAY.
+
+
+#working area at base of ram
+$_TARGETNAME configure -work-area-virt 0
+
+#setup flash
+#set _FLASHNAME $_CHIPNAME.flash
+#flash bank $_FLASHNAME dsp5680xx_flash 0 0 2 1 $_TARGETNAME
+