Allow transports to override the selected target (hla configs unification)

[openocd.git] / tcl / target / efm32_stlink.cfg

diff --git a/tcl/target/efm32_stlink.cfg b/tcl/target/efm32_stlink.cfg
index 45ed9fc5840df66849f1177b672dee411937117b..230155ea02118aaeedd4d181a618ef6f0554d06a 100644 (file)
--- a/tcl/target/efm32_stlink.cfg
+++ b/tcl/target/efm32_stlink.cfg
@@ -1,42 +1,2 @@
-#
-# efm32 stlink pseudo target
-#
-
-if { [info exists CHIPNAME] } {
-   set _CHIPNAME $CHIPNAME
-} else {
-   set _CHIPNAME efm32
-}
-
-# Work-area is a space in RAM used for flash programming
-# By default use 2kB
-if { [info exists WORKAREASIZE] } {
-   set _WORKAREASIZE $WORKAREASIZE
-} else {
-   set _WORKAREASIZE 0x800
-}
-
-if { [info exists CPUTAPID] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0x2ba01477
-}
-
-# EFM32 MCUs only support SWD interface
-set _TRANSPORT hla_swd
-
-transport select $_TRANSPORT
-
-hla newtap $_CHIPNAME cpu -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME hla_target -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME efm32 0 0 0 0 $_TARGETNAME
-
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m reset_config sysresetreq
+echo "WARNING: target/efm32_stlink.cfg is deprecated, please switch to target/efm32.cfg"
+source [find target/efm32.cfg]