tcl/target/fm3.cfg: use a CHIPNAME known by the flash driver

[openocd.git] / tcl / target / fm3.cfg

diff --git a/tcl/target/fm3.cfg b/tcl/target/fm3.cfg
index 60967e927f1ca380636a17e5536a629fb3669b01..74a4e278b68ccd8d4c7d0cefc5a6f6c53838a698 100644 (file)
--- a/tcl/target/fm3.cfg
+++ b/tcl/target/fm3.cfg
@@ -1,10 +1,10 @@
-# MB96F506
+# MB9BF506
 # Fujitsu Cortex-M3 with 512kB Flash and 64kB RAM
 
 if { [info exists CHIPNAME] } {
        set _CHIPNAME $CHIPNAME
 } else {
-       set _CHIPNAME mb9bf500
+       set _CHIPNAME mb9bfxx6
 }
 
 if { [info exists ENDIAN] } {
@@ -29,7 +29,7 @@ reset_config trst_only
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # MB9BF506 has 64kB of SRAM on its main system bus 
 $_TARGETNAME configure -work-area-phys 0x1FFF8000 -work-area-size 0x10000 -work-area-backup 0
@@ -44,4 +44,4 @@ adapter_khz 500
 
 # if srst is not fitted use SYSRESETREQ to
 # perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq