tcl/target: make sure kex.cfg is not used for Kinetis KE1x families

[openocd.git] / tcl / target / imx21.cfg

diff --git a/tcl/target/imx21.cfg b/tcl/target/imx21.cfg
index fd2143e181f40906c04c0f7e0aee63aa5d16a5f5..2d9ce39c61f7e80e0b13812db1fc19dec6f3d785 100644 (file)
--- a/tcl/target/imx21.cfg
+++ b/tcl/target/imx21.cfg
@@ -1,32 +1,34 @@
 #use combined on interfaces or targets that can't set TRST/SRST separately
+#
+# Hmmm.... should srst_pulls_trst be used here like i.MX27???
 reset_config trst_and_srst
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
-   set  _CHIPNAME imx21
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME imx21
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
-   set  _ENDIAN little
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
+   set _ENDIAN little
 }
 
 
-# Note above there is 1 tap 
+# Note above there is 1 tap
 
 # The CPU tap
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x0792611f
 }
-jtag newtap $_CHIPNAME cpu  -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 
 # Create the GDB Target.
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 arm7_9 dcc_downloads enable