target config files: Fix whitespace issues.

[openocd.git] / tcl / target / imx27.cfg

diff --git a/tcl/target/imx27.cfg b/tcl/target/imx27.cfg
index dabae6d70f8d621cc59dfb5d07e990f84eb7099a..5530e68488d3ca5169269714e0cfeb9a09361deb 100644 (file)
--- a/tcl/target/imx27.cfg
+++ b/tcl/target/imx27.cfg
@@ -7,42 +7,42 @@
 reset_config trst_and_srst srst_pulls_trst
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME imx27
+   set _CHIPNAME imx27
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
 
 # Note above there are 2 taps
 
 # trace buffer
-if { [info exists ETBTAPID ] } {
+if { [info exists ETBTAPID] } {
    set _ETBTAPID $ETBTAPID
 } else {
    set _ETBTAPID 0x1b900f0f
 }
-jtag newtap $_CHIPNAME etb  -irlen 4 -irmask 0xf -expected-id $_ETBTAPID
+jtag newtap $_CHIPNAME etb -irlen 4 -irmask 0xf -expected-id $_ETBTAPID
 
 # The CPU tap
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x07926121
 }
-jtag newtap $_CHIPNAME cpu  -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 # Create the GDB Target.
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
 # REVISIT what operating environment sets up this virtual address mapping?
 $_TARGETNAME configure -work-area-virt 0xffff4c00 -work-area-phys 0xffff4c00 \
-       -work-area-size  0x8000 -work-area-backup 1
+       -work-area-size 0x8000 -work-area-backup 1
 # Internal to the chip, there is 45K of SRAM
 #