flash Kinetis: Detect RESET/WDOG loop, fix detection of secured MCU

[openocd.git] / tcl / target / kx.cfg

diff --git a/tcl/target/kx.cfg b/tcl/target/kx.cfg
index ad76ac663fccf0062429d0387169f7503469abae..b39ee3dd18227a9ab7e4ca11256fcbc09985470f 100644 (file)
--- a/tcl/target/kx.cfg
+++ b/tcl/target/kx.cfg
@@ -33,14 +33,6 @@ swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPU
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu
 
-# It is important that "kinetis mdm check_security" is called for
-# 'examine-end' event and not 'eximine-start'. Calling it in 'examine-start'
-# causes "kinetis mdm check_security" to fail the first time openocd
-# calls it when it tries to connect after the CPU has been power-cycled.
-$_CHIPNAME.cpu configure -event examine-end {
-       kinetis mdm check_security
-}
-
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
 
 set _FLASHNAME $_CHIPNAME.flash
@@ -51,6 +43,11 @@ adapter_khz 1000
 reset_config srst_nogate
 
 if {![using_hla]} {
+   # Detect secured MCU or boot lock-up in RESET/WDOG loop
+   $_CHIPNAME.cpu configure -event examine-start {
+      kinetis mdm check_security
+   }
+
    # if srst is not fitted use SYSRESETREQ to
    # perform a soft reset
    cortex_m reset_config sysresetreq