NOR: lpc2000 Add support for LPC84x devices

[openocd.git] / tcl / target / lpc1xxx.cfg

diff --git a/tcl/target/lpc1xxx.cfg b/tcl/target/lpc1xxx.cfg
index 9c10e9f933a3bc1633e22e611d7dfa08a86131ca..1969e464f692b754d1fd3f859e54b1bc02653aa1 100644 (file)
--- a/tcl/target/lpc1xxx.cfg
+++ b/tcl/target/lpc1xxx.cfg
@@ -75,9 +75,10 @@ if { [info exists WORKAREASIZE] } {
 }
 
 swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
 
 # The LPC11xx devices have 2/4/8kB of SRAM in the ARMv7-M "Code" area (at 0x10000000)
 # The LPC12xx devices have 4/8kB of SRAM in the ARMv7-M "Code" area (at 0x10000000)
@@ -98,10 +99,14 @@ $_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE
 # (same cmd51 destination boundary alignment, and all three support 256 byte
 # transfers).
 #
-# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum] [iap entry]
+set _IAP_ENTRY 0
+if { [info exists IAP_ENTRY] } {
+       set _IAP_ENTRY $IAP_ENTRY
+}
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0 0 0 $_TARGETNAME \
-       auto $_CCLK calc_checksum
+       auto $_CCLK calc_checksum $_IAP_ENTRY
 
 if { $_CHIPSERIES == "lpc800" || $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" || $_CHIPSERIES == "lpc1300" } {
        # Do not remap 0x0000-0x0200 to anything but the flash (i.e. select