remove srst_pulls_trst from LPC2xxx target scripts

[openocd.git] / tcl / target / lpc2124.cfg

diff --git a/tcl/target/lpc2124.cfg b/tcl/target/lpc2124.cfg
index 9a27aece5d5673eac17d34dc158090ad626c01d3..df71bdde4c10909048af9e7cc42ec674438907b7 100644 (file)
--- a/tcl/target/lpc2124.cfg
+++ b/tcl/target/lpc2124.cfg
@@ -1,4 +1,4 @@
-#LPC-2124 CPU
+# NXP LPC2124
 
 if { [info exists CHIPNAME] } {
    set  _CHIPNAME $CHIPNAME
@@ -6,38 +6,28 @@ if { [info exists CHIPNAME] } {
    set  _CHIPNAME lpc2124
 }
 
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-   set  _ENDIAN little
-}
-
 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
     set _CPUTAPID 0x4f1f0f0f
 }
 
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
+reset_config trst_and_srst
 
 # reset delays
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
 jtag_ntrst_delay 100
 
-jtag_khz 1000
+adapter_khz 1000
 
 #jtag scan chain
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+target create $_TARGETNAME arm7tdmi -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
 
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14745 calc_checksum